From: James Bottomley <James.Bottomley@SteelEye.com>
To: Jesse Barnes <jbarnes@engr.sgi.com>
Cc: Matthew Wilcox <willy@debian.org>,
Grant Grundler <grundler@parisc-linux.org>,
Andrew Vasquez <andrew.vasquez@qlogic.com>,
pj@sgi.com, SCSI Mailing List <linux-scsi@vger.kernel.org>,
mdr@cthulhu.engr.sgi.com, jeremy@cthulhu.engr.sgi.com,
djh@cthulhu.engr.sgi.com, Andrew Morton <akpm@osdl.org>
Subject: Re: SCSI QLA not working on latest *-mm SN2
Date: 21 Sep 2004 12:11:10 -0400 [thread overview]
Message-ID: <1095783077.2467.145.camel@mulgrave> (raw)
In-Reply-To: <200409211205.22575.jbarnes@engr.sgi.com>
On Tue, 2004-09-21 at 12:05, Jesse Barnes wrote:
> Reading from the closest bridge won't be enough? If not, then dealing with
> posting in a nice way is simply impossible for some devices. We'd be stuck
> with udelay().
That's correct. The posted write is held somewhere in one of the
bridges, but the PCI ordering rules only require it to be ordered with
other MMIO reads to the *device*; so you only guarantee that the posted
write is flushed by doing a device read....obviously, there exist
bridges with looser ideas than this, but we need to follow the PCI
specs.
udelay() isn't a viable solution because the PCI specs have no upper
bound on the length of time a write may remain posted.
James
next prev parent reply other threads:[~2004-09-21 16:11 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <B179AE41C1147041AA1121F44614F0B060EF48@AVEXCH02.qlogic.org>
[not found] ` <20040916121235.5e4f9c32.pj@sgi.com>
[not found] ` <1095362263.16326.12.camel@praka>
2004-09-16 19:56 ` SCSI QLA not working on latest *-mm SN2 Paul Jackson
2004-09-16 20:05 ` Jesse Barnes
2004-09-16 20:56 ` Andrew Vasquez
2004-09-16 21:09 ` Jesse Barnes
2004-09-16 21:40 ` Andrew Vasquez
2004-09-16 22:25 ` Andrew Morton
2004-09-16 22:29 ` Jesse Barnes
2004-09-17 17:21 ` Jesse Barnes
2004-09-18 6:10 ` Grant Grundler
2004-09-18 17:57 ` Documentation/io_ordering.txt is wrong Matthew Wilcox
2004-09-20 23:39 ` Jesse Barnes
2004-09-21 0:38 ` Jesse Barnes
2004-09-20 22:40 ` SCSI QLA not working on latest *-mm SN2 Jesse Barnes
2004-09-20 23:27 ` Grant Grundler
2004-09-21 0:09 ` Jesse Barnes
2004-09-21 5:46 ` Grant Grundler
2004-09-21 6:45 ` Jeremy Higdon
2004-09-21 13:29 ` Jesse Barnes
2004-09-21 13:25 ` Jesse Barnes
2004-09-21 15:13 ` Jesse Barnes
2004-09-21 15:41 ` James Bottomley
2004-09-21 15:58 ` Jesse Barnes
2004-09-21 16:01 ` Matthew Wilcox
2004-09-21 16:05 ` Jesse Barnes
2004-09-21 16:11 ` James Bottomley [this message]
2004-09-21 16:18 ` Jesse Barnes
2004-09-21 16:24 ` James Bottomley
2004-09-21 17:03 ` Jesse Barnes
2004-09-21 17:15 ` Matthew Wilcox
2004-09-21 17:24 ` Jesse Barnes
2004-09-21 17:20 ` James Bottomley
2004-09-21 17:46 ` Jesse Barnes
2004-09-21 17:56 ` James Bottomley
2004-09-21 18:09 ` Jesse Barnes
2004-09-21 19:06 ` Grant Grundler
2004-09-21 19:40 ` Jesse Barnes
2004-09-21 22:44 ` Grant Grundler
2004-09-21 21:03 ` Jeremy Higdon
2004-09-21 21:11 ` Matthew Wilcox
2004-09-21 21:43 ` Jeremy Higdon
2004-09-21 22:33 ` Jesse Barnes
2004-09-22 0:02 ` Matthew Wilcox
2004-09-22 1:16 ` Jeremy Higdon
2004-09-22 1:44 ` Grant Grundler
2004-09-22 2:58 ` Jeremy Higdon
2004-09-22 14:32 ` I/O write ordering Matthew Wilcox
2004-09-22 14:40 ` Benjamin Herrenschmidt
2004-09-22 14:50 ` Jesse Barnes
2004-09-22 14:47 ` James Bottomley
2004-09-22 14:51 ` Benjamin Herrenschmidt
2004-09-22 15:11 ` James Bottomley
2004-09-22 15:11 ` Benjamin Herrenschmidt
2004-09-22 15:22 ` James Bottomley
2004-09-22 15:28 ` Benjamin Herrenschmidt
2004-09-22 15:43 ` James Bottomley
2004-09-23 0:19 ` Benjamin Herrenschmidt
2004-09-23 1:58 ` Matthew Wilcox
2004-09-23 3:01 ` James Bottomley
2004-09-23 3:40 ` Benjamin Herrenschmidt
2004-09-23 4:26 ` Grant Grundler
2004-09-21 23:03 ` SCSI QLA not working on latest *-mm SN2 Guennadi Liakhovetski
2004-09-16 23:14 ` Jeremy Higdon
2004-09-16 20:11 ` Andrew Morton
2004-09-21 21:22 Andrew Vasquez
2004-09-21 21:44 ` Jeremy Higdon
2004-09-21 22:37 ` Jesse Barnes
2004-09-21 22:49 ` Jeremy Higdon
-- strict thread matches above, loose matches on Subject: below --
2004-09-21 20:50 Andrew Vasquez
2004-09-21 21:06 ` Jeremy Higdon
2004-09-21 22:36 ` Jesse Barnes
2004-09-21 22:39 ` Jeremy Higdon
2004-09-21 22:43 ` Jesse Barnes
2004-09-21 22:54 ` Jeremy Higdon
2004-09-21 23:17 ` Jesse Barnes
2004-09-22 21:33 ` Jesse Barnes
2004-09-21 17:33 Andrew Vasquez
2004-09-21 17:52 ` Jesse Barnes
2004-09-21 18:04 ` Matthew Wilcox
2004-09-21 18:59 ` Matthew Wilcox
2004-09-21 19:10 ` Jesse Barnes
2004-09-21 15:58 Andrew Vasquez
2004-09-21 16:07 ` Jesse Barnes
2004-09-21 16:25 ` Matthew Wilcox
2004-09-21 16:33 ` James Bottomley
2004-09-21 20:39 ` Jeremy Higdon
2004-09-21 20:43 ` Jeremy Higdon
2004-09-17 22:55 Andrew Vasquez
2004-09-17 23:10 ` Jesse Barnes
2004-09-17 23:55 ` James Bottomley
2004-09-18 1:15 ` Andrew Vasquez
2004-09-18 1:25 ` Matthew Wilcox
2004-09-18 1:24 ` Andrew Vasquez
2004-09-18 2:36 ` Jeremy Higdon
2004-09-18 19:12 ` James Bottomley
2004-09-15 22:51 Paul Jackson
2004-09-15 23:13 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1095783077.2467.145.camel@mulgrave \
--to=james.bottomley@steeleye.com \
--cc=akpm@osdl.org \
--cc=andrew.vasquez@qlogic.com \
--cc=djh@cthulhu.engr.sgi.com \
--cc=grundler@parisc-linux.org \
--cc=jbarnes@engr.sgi.com \
--cc=jeremy@cthulhu.engr.sgi.com \
--cc=linux-scsi@vger.kernel.org \
--cc=mdr@cthulhu.engr.sgi.com \
--cc=pj@sgi.com \
--cc=willy@debian.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox