Re: [PATCH v2 6/7] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550

[neil.armstrong@linaro.org]

Hi,

On 10/11/2023 10:03, Can Guo wrote:
> Hi Neil,
> 
> On 11/10/2023 4:47 PM, neil.armstrong@linaro.org wrote:
>> Hi,
>>
>> On 07/11/2023 05:46, Can Guo wrote:
>>> From: Can Guo <quic_cang@quicinc.com>
>>>
>>> On SM8550, two sets of UFS PHY settings are provided, one set is to support
>>> HS-G5, another set is to support HS-G4 and lower gears. The two sets of PHY
>>> settings are programming different values to different registers, mixing
>>> the two sets and/or overwriting one set with another set is definitely not
>>> blessed by UFS PHY designers. In order to add HS-G5 support for SM8550, we
>>> need to split the two sets into their dedicated tables, and leave only the
>>> common settings in the .tlbs. To have the PHY programmed with the correct
>>> set of PHY settings, the submode passed to PHY driver must be either HS-G4
>>> or HS-G5.
>>
>> I guess I'll need to rebase my SM8650 UFS PHY driver to support both G4 and G5 modes
>> at some point ?
> 
> 
> Thank for reaching out. Yes, please.
> 
> I can help review the PHY settings.

Ok I'll try rebasing on this serie and add G5 support.

> 
> BTW, are you enabling MCQ (by adding MCQ related DT) at the same time?

I tested MCQ but it triggers the same issues we have with suspend/resume on SM8550 & SM8650,
and the bindings are not present of the UFS qcom node.

Neil

> 
> Thanks,
> Can Guo.
> 
>>
>> Neil
>>