From: Andrew Vasquez <andrew.vasquez@qlogic.com>
To: Linux SCSI Mailing List <linux-scsi@vger.kernel.org>,
James Bottomley <james.bottomley@steeleye.com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>,
Seokmann Ju <seokmann.ju@qlogic.com>
Subject: [PATCH 4/6] qla2xxx: Drop acquisition of hardware_lock during flash manipulations.
Date: Mon, 12 Mar 2007 10:41:29 -0700 [thread overview]
Message-ID: <117372129198-git-send-email-andrew.vasquez@qlogic.com> (raw)
In-Reply-To: <20070312174019.GA1216@andrew-vasquezs-computer.local>
There's no need given, I/O has been quiesced, RISC
interrupts have been disabled, and finally the RISC has been
paused. Flash manipulation on ISP21xx, ISP22xx, and ISP23xx
parts requires the RISC to go through a full reset to
recover.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
---
drivers/scsi/qla2xxx/qla_sup.c | 6 ------
1 files changed, 0 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 362d041..206bda0 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -1453,7 +1453,6 @@ uint8_t *
qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
uint32_t offset, uint32_t length)
{
- unsigned long flags;
uint32_t addr, midpoint;
uint8_t *data;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
@@ -1462,7 +1461,6 @@ qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
qla2x00_suspend_hba(ha);
/* Go with read. */
- spin_lock_irqsave(&ha->hardware_lock, flags);
midpoint = ha->optrom_size / 2;
qla2x00_flash_enable(ha);
@@ -1477,7 +1475,6 @@ qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
*data = qla2x00_read_flash_byte(ha, addr);
}
qla2x00_flash_disable(ha);
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Resume HBA. */
qla2x00_resume_hba(ha);
@@ -1491,7 +1488,6 @@ qla2x00_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
{
int rval;
- unsigned long flags;
uint8_t man_id, flash_id, sec_number, data;
uint16_t wd;
uint32_t addr, liter, sec_mask, rest_addr;
@@ -1504,7 +1500,6 @@ qla2x00_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
sec_number = 0;
/* Reset ISP chip. */
- spin_lock_irqsave(&ha->hardware_lock, flags);
WRT_REG_WORD(®->ctrl_status, CSR_ISP_SOFT_RESET);
pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
@@ -1697,7 +1692,6 @@ update_flash:
}
} while (0);
qla2x00_flash_disable(ha);
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Resume HBA. */
qla2x00_resume_hba(ha);
--
1.5.0.3.382.g34572
next prev parent reply other threads:[~2007-03-12 17:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-12 17:40 [PATCH 0/6] qla2xxx: fixes for 2.6.21 [8.01.07-k6] Andrew Vasquez
2007-03-12 17:41 ` [PATCH 1/6] qla2xxx: fix RSCN handling on big-endian systems Andrew Vasquez
2007-03-12 17:41 ` [PATCH 2/6] qla2xxx: Add scan_[start|finish]() callbacks for ISP24xx HBAs Andrew Vasquez
2007-03-12 17:41 ` [PATCH 3/6] qla2xxx: Add cond_resched() calls during HBA flash manipulation Andrew Vasquez
2007-03-12 17:41 ` Andrew Vasquez [this message]
2007-03-12 17:41 ` [PATCH 5/6] qla2xxx: Allow the extended-error-logging flag to be dynamic Andrew Vasquez
2007-03-12 17:41 ` [PATCH 6/6] qla2xxx: Update version number to 8.01.07-k6 Andrew Vasquez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=117372129198-git-send-email-andrew.vasquez@qlogic.com \
--to=andrew.vasquez@qlogic.com \
--cc=james.bottomley@steeleye.com \
--cc=linux-scsi@vger.kernel.org \
--cc=seokmann.ju@qlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox