From: Viswas G <Viswas.G@pmcs.com>
To: linux-scsi@vger.kernel.org
Cc: xjtuwjp@gmail.com, Vasanthalakshmi.Tharmarajan@pmcs.com,
Suresh.Thiagarajan@pmcs.com, Viswas.G@pmcs.com
Subject: [PATCH v2 2/2] pm80xx : Fixed return value issue
Date: Tue, 10 Dec 2013 10:31:38 +0530 [thread overview]
Message-ID: <1386651698-4331-1-git-send-email-Viswas.G@pmcs.com> (raw)
pm80xx_get_gsm_dump() was returning "1" in error case
instead of negative error value.
Signed-off-by: Viswas G <Viswas.G@pmcs.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Acked-by: TomasHenzl <thenzl@redhat.com>
---
drivers/scsi/pm8001/pm8001_ctl.c | 4 ++--
drivers/scsi/pm8001/pm8001_hwi.c | 8 ++++----
drivers/scsi/pm8001/pm80xx_hwi.c | 15 ++++-----------
3 files changed, 10 insertions(+), 17 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
index 1738965..28b4e81 100644
--- a/drivers/scsi/pm8001/pm8001_ctl.c
+++ b/drivers/scsi/pm8001/pm8001_ctl.c
@@ -452,7 +452,7 @@ static DEVICE_ATTR(iop_log, S_IRUGO, pm8001_ctl_iop_log_show, NULL);
static ssize_t pm8001_ctl_fatal_log_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
- u32 count;
+ ssize_t count;
count = pm80xx_get_fatal_dump(cdev, attr, buf);
return count;
@@ -470,7 +470,7 @@ static DEVICE_ATTR(fatal_log, S_IRUGO, pm8001_ctl_fatal_log_show, NULL);
static ssize_t pm8001_ctl_gsm_log_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
- u32 count;
+ ssize_t count;
count = pm8001_get_gsm_dump(cdev, SYSFS_OFFSET, buf);
return count;
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 2aa0681..46ace52 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -5020,7 +5020,7 @@ pm8001_get_gsm_dump(struct device *cdev, u32 length, char *buf)
/* check max is 1 Mbytes */
if ((length > 0x100000) || (gsm_dump_offset & 3) ||
((gsm_dump_offset + length) > 0x1000000))
- return 1;
+ return -EINVAL;
if (pm8001_ha->chip_id == chip_8001)
bar = 2;
@@ -5048,12 +5048,12 @@ pm8001_get_gsm_dump(struct device *cdev, u32 length, char *buf)
gsm_base = GSM_BASE;
if (-1 == pm8001_bar4_shift(pm8001_ha,
(gsm_base + shift_value)))
- return 1;
+ return -EIO;
} else {
gsm_base = 0;
if (-1 == pm80xx_bar4_shift(pm8001_ha,
(gsm_base + shift_value)))
- return 1;
+ return -EIO;
}
gsm_dump_offset = (gsm_dump_offset + offset) &
0xFFFF0000;
@@ -5073,7 +5073,7 @@ pm8001_get_gsm_dump(struct device *cdev, u32 length, char *buf)
}
/* Shift back to BAR4 original address */
if (-1 == pm8001_bar4_shift(pm8001_ha, 0))
- return 1;
+ return -EIO;
pm8001_ha->fatal_forensic_shift_offset += 1024;
if (pm8001_ha->fatal_forensic_shift_offset >= 0x100000)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index c950dc5..65de79c 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -91,7 +91,6 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
void __iomem *fatal_table_address = pm8001_ha->fatal_tbl_addr;
- u32 status = 1;
u32 accum_len , reg_val, index, *temp;
unsigned long start;
u8 *direct_data;
@@ -111,13 +110,10 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
direct_data = (u8 *)fatal_error_data;
pm8001_ha->forensic_info.data_type = TYPE_NON_FATAL;
pm8001_ha->forensic_info.data_buf.direct_len = SYSFS_OFFSET;
- pm8001_ha->forensic_info.data_buf.direct_offset = 0;
pm8001_ha->forensic_info.data_buf.read_len = 0;
pm8001_ha->forensic_info.data_buf.direct_data = direct_data;
- }
-
- if (pm8001_ha->forensic_info.data_buf.direct_offset == 0) {
+
/* start to get data */
/* Program the MEMBASE II Shifting Register with 0x00.*/
pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER,
@@ -126,6 +122,7 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
pm8001_ha->forensic_fatal_step = 0;
pm8001_ha->fatal_bar_loc = 0;
}
+
/* Read until accum_len is retrived */
accum_len = pm8001_mr32(fatal_table_address,
MPI_FATAL_EDUMP_TABLE_ACCUM_LEN);
@@ -135,7 +132,7 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("Possible PCI issue 0x%x not expected\n",
accum_len));
- return status;
+ return -EIO;
}
if (accum_len == 0 || accum_len >= 0x100000) {
pm8001_ha->forensic_info.data_buf.direct_data +=
@@ -178,7 +175,6 @@ moreData:
pm8001_ha->forensic_fatal_step = 1;
pm8001_ha->fatal_forensic_shift_offset = 0;
pm8001_ha->forensic_last_offset = 0;
- status = 0;
return (char *)pm8001_ha->
forensic_info.data_buf.direct_data -
(char *)buf;
@@ -194,7 +190,6 @@ moreData:
forensic_info.data_buf.direct_data,
"%08x ", *(temp + index));
}
- status = 0;
return (char *)pm8001_ha->
forensic_info.data_buf.direct_data -
(char *)buf;
@@ -214,7 +209,6 @@ moreData:
pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER,
pm8001_ha->fatal_forensic_shift_offset);
pm8001_ha->fatal_bar_loc = 0;
- status = 0;
return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
(char *)buf;
}
@@ -239,7 +233,7 @@ moreData:
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("TIMEOUT:MEMBASE_II_SHIFT_REGISTER"
" = 0x%x\n", reg_val));
- return -1;
+ return -EIO;
}
/* Read the next 64K of the debug data. */
@@ -259,7 +253,6 @@ moreData:
pm8001_ha->forensic_info.data_buf.direct_len = 0;
pm8001_ha->forensic_info.data_buf.direct_offset = 0;
pm8001_ha->forensic_info.data_buf.read_len = 0;
- status = 0;
}
}
--
1.7.1
next reply other threads:[~2013-12-10 5:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-10 5:01 Viswas G [this message]
2013-12-11 16:36 ` [PATCH v2 2/2] pm80xx : Fixed return value issue Tomas Henzl
2013-12-11 19:47 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386651698-4331-1-git-send-email-Viswas.G@pmcs.com \
--to=viswas.g@pmcs.com \
--cc=Suresh.Thiagarajan@pmcs.com \
--cc=Vasanthalakshmi.Tharmarajan@pmcs.com \
--cc=linux-scsi@vger.kernel.org \
--cc=xjtuwjp@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox