[PATCH v2 4/9] pm80xx: add support for ATTO devices during SAS address initiailization

[Benjamin Rood <benjaminjrood@gmail.com>]

ATTO SAS controllers retrieve the SAS address from the NVRAM in a location
different from non-ATTO PMC Sierra SAS controllers.  This patch makes the
necessary adjustments in order to retrieve the SAS address on these types
of adapters.

Signed-off-by: Benjamin Rood <brood@attotech.com>
---
Changes from v1 -> v2:
	-Fixed indentation issues noted by Hannes and Jack

 drivers/scsi/pm8001/pm8001_init.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index feaf504..861416f 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -636,6 +636,11 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 			payload.minor_function = 0;
 			payload.length = 128;
 		}
+	} else if ((pm8001_ha->chip_id == chip_8070 ||
+			pm8001_ha->chip_id == chip_8072) &&
+			pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
+		payload.minor_function = 4;
+		payload.length = 4096;
 	} else {
 		payload.minor_function = 1;
 		payload.length = 4096;
@@ -662,6 +667,11 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 			else if (deviceid == 0x0042)
 				pm8001_ha->sas_addr[j] =
 					payload.func_specific[0x010 + i];
+		} else if ((pm8001_ha->chip_id == chip_8070 ||
+				pm8001_ha->chip_id == chip_8072) &&
+				pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
+			pm8001_ha->sas_addr[j] =
+					payload.func_specific[0x010 + i];
 		} else
 			pm8001_ha->sas_addr[j] =
 					payload.func_specific[0x804 + i];
-- 
2.4.3