public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: John Garry <john.garry@huawei.com>
To: jejb@linux.vnet.ibm.com, martin.petersen@oracle.com
Cc: linuxarm@huawei.com, linux-scsi@vger.kernel.org,
	linux-kernel@vger.kernel.org, arnd@arndb.de, hch@infradead.org,
	Xiang Chen <chenxiang66@hisilicon.com>,
	John Garry <john.garry@huawei.com>
Subject: [PATCH v6 17/22] scsi: hisi_sas: add v3 code to send ATA frame
Date: Wed, 14 Jun 2017 23:33:27 +0800	[thread overview]
Message-ID: <1497454412-91194-18-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1497454412-91194-1-git-send-email-john.garry@huawei.com>

From: Xiang Chen <chenxiang66@hisilicon.com>

Add code to prepare ATA frame for v3 hw

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 106 +++++++++++++++++++++++++++++++++
 1 file changed, 106 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 515f50c..30c103b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -171,8 +171,11 @@
 #define CMD_HDR_CMD_OFF			29
 #define CMD_HDR_CMD_MSK			(0x7 << CMD_HDR_CMD_OFF)
 /* dw1 */
+#define CMD_HDR_UNCON_CMD_OFF	3
 #define CMD_HDR_DIR_OFF			5
 #define CMD_HDR_DIR_MSK			(0x3 << CMD_HDR_DIR_OFF)
+#define CMD_HDR_RESET_OFF		7
+#define CMD_HDR_RESET_MSK		(0x1 << CMD_HDR_RESET_OFF)
 #define CMD_HDR_VDTL_OFF		10
 #define CMD_HDR_VDTL_MSK		(0x1 << CMD_HDR_VDTL_OFF)
 #define CMD_HDR_FRAME_TYPE_OFF		11
@@ -182,6 +185,8 @@
 /* dw2 */
 #define CMD_HDR_CFL_OFF			0
 #define CMD_HDR_CFL_MSK			(0x1ff << CMD_HDR_CFL_OFF)
+#define CMD_HDR_NCQ_TAG_OFF		10
+#define CMD_HDR_NCQ_TAG_MSK		(0x1f << CMD_HDR_NCQ_TAG_OFF)
 #define CMD_HDR_MRFL_OFF		15
 #define CMD_HDR_MRFL_MSK		(0x1ff << CMD_HDR_MRFL_OFF)
 #define CMD_HDR_SG_MOD_OFF		24
@@ -260,6 +265,11 @@ enum {
 #define DIR_TO_DEVICE 2
 #define DIR_RESERVED 3
 
+#define CMD_IS_UNCONSTRAINT(cmd) \
+	((cmd == ATA_CMD_READ_LOG_EXT) || \
+	(cmd == ATA_CMD_READ_LOG_DMA_EXT) || \
+	(cmd == ATA_CMD_DEV_RESET))
+
 static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
 {
 	void __iomem *regs = hisi_hba->regs + off;
@@ -725,6 +735,101 @@ static int prep_smp_v3_hw(struct hisi_hba *hisi_hba,
 	return rc;
 }
 
+static int get_ncq_tag_v3_hw(struct sas_task *task, u32 *tag)
+{
+	struct ata_queued_cmd *qc = task->uldd_task;
+
+	if (qc) {
+		if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+			qc->tf.command == ATA_CMD_FPDMA_READ) {
+			*tag = qc->tag;
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static int prep_ata_v3_hw(struct hisi_hba *hisi_hba,
+			  struct hisi_sas_slot *slot)
+{
+	struct sas_task *task = slot->task;
+	struct domain_device *device = task->dev;
+	struct domain_device *parent_dev = device->parent;
+	struct hisi_sas_device *sas_dev = device->lldd_dev;
+	struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
+	struct asd_sas_port *sas_port = device->port;
+	struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
+	u8 *buf_cmd;
+	int has_data = 0, rc = 0, hdr_tag = 0;
+	u32 dw1 = 0, dw2 = 0;
+
+	hdr->dw0 = cpu_to_le32(port->id << CMD_HDR_PORT_OFF);
+	if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
+		hdr->dw0 |= cpu_to_le32(3 << CMD_HDR_CMD_OFF);
+	else
+		hdr->dw0 |= cpu_to_le32(4 << CMD_HDR_CMD_OFF);
+
+	switch (task->data_dir) {
+	case DMA_TO_DEVICE:
+		has_data = 1;
+		dw1 |= DIR_TO_DEVICE << CMD_HDR_DIR_OFF;
+		break;
+	case DMA_FROM_DEVICE:
+		has_data = 1;
+		dw1 |= DIR_TO_INI << CMD_HDR_DIR_OFF;
+		break;
+	default:
+		dw1 &= ~CMD_HDR_DIR_MSK;
+	}
+
+	if ((task->ata_task.fis.command == ATA_CMD_DEV_RESET) &&
+			(task->ata_task.fis.control & ATA_SRST))
+		dw1 |= 1 << CMD_HDR_RESET_OFF;
+
+	dw1 |= (hisi_sas_get_ata_protocol(
+		task->ata_task.fis.command, task->data_dir))
+		<< CMD_HDR_FRAME_TYPE_OFF;
+	dw1 |= sas_dev->device_id << CMD_HDR_DEV_ID_OFF;
+
+	if (CMD_IS_UNCONSTRAINT(task->ata_task.fis.command))
+		dw1 |= 1 << CMD_HDR_UNCON_CMD_OFF;
+
+	hdr->dw1 = cpu_to_le32(dw1);
+
+	/* dw2 */
+	if (task->ata_task.use_ncq && get_ncq_tag_v3_hw(task, &hdr_tag)) {
+		task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
+		dw2 |= hdr_tag << CMD_HDR_NCQ_TAG_OFF;
+	}
+
+	dw2 |= (HISI_SAS_MAX_STP_RESP_SZ / 4) << CMD_HDR_CFL_OFF |
+			2 << CMD_HDR_SG_MOD_OFF;
+	hdr->dw2 = cpu_to_le32(dw2);
+
+	/* dw3 */
+	hdr->transfer_tags = cpu_to_le32(slot->idx);
+
+	if (has_data) {
+		rc = prep_prd_sge_v3_hw(hisi_hba, slot, hdr, task->scatter,
+					slot->n_elem);
+		if (rc)
+			return rc;
+	}
+
+	hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len);
+	hdr->cmd_table_addr = cpu_to_le64(slot->command_table_dma);
+	hdr->sts_buffer_addr = cpu_to_le64(slot->status_buffer_dma);
+
+	buf_cmd = slot->command_table;
+
+	if (likely(!task->ata_task.device_control_reg_update))
+		task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
+	/* fill in command FIS */
+	memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
+
+	return 0;
+}
+
 static int phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
 {
 	int i, res = 0;
@@ -1299,6 +1404,7 @@ static int hisi_sas_v3_init(struct hisi_hba *hisi_hba)
 	.sl_notify = sl_notify_v3_hw,
 	.prep_ssp = prep_ssp_v3_hw,
 	.prep_smp = prep_smp_v3_hw,
+	.prep_stp = prep_ata_v3_hw,
 	.get_free_slot = get_free_slot_v3_hw,
 	.start_delivery = start_delivery_v3_hw,
 	.slot_complete = slot_complete_v3_hw,
-- 
1.9.1

  parent reply	other threads:[~2017-06-14 15:33 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-14 15:33 [PATCH v6 00/22] hisi_sas: hip08 support John Garry
2017-06-14 15:33 ` [PATCH v6 01/22] scsi: hisi_sas: fix timeout check in hisi_sas_internal_task_abort() John Garry
2017-06-14 15:33 ` [PATCH v6 02/22] scsi: hisi_sas: define hisi_sas_device.device_id as int John Garry
2017-06-14 15:33 ` [PATCH v6 03/22] scsi: hisi_sas: optimise the usage of hisi_hba.lock John Garry
2017-06-14 15:33 ` [PATCH v6 04/22] scsi: hisi_sas: relocate get_ata_protocol() John Garry
2017-06-14 15:33 ` [PATCH v6 05/22] scsi: hisi_sas: relocate sata_done_v2_hw() John Garry
2017-06-14 15:33 ` [PATCH v6 06/22] scsi: hisi_sas: relocate get_ncq_tag_v2_hw() John Garry
2017-06-14 15:33 ` [PATCH v6 07/22] scsi: hisi_sas: add pci_dev in hisi_hba struct John Garry
2017-06-14 15:33 ` [PATCH v6 08/22] scsi: hisi_sas: create hisi_sas_get_fw_info() John Garry
2017-06-14 15:33 ` [PATCH v6 09/22] scsi: hisi_sas: add skeleton v3 hw driver John Garry
2017-06-14 15:33 ` [PATCH v6 10/22] scsi: hisi_sas: add initialisation for v3 pci-based controller John Garry
2017-06-14 15:33 ` [PATCH v6 11/22] scsi: hisi_sas: add v3 hw init John Garry
2017-06-14 15:33 ` [PATCH v6 12/22] scsi: hisi_sas: add v3 hw PHY init John Garry
2017-06-14 15:33 ` [PATCH v6 13/22] scsi: hisi_sas: add phy up/down/bcast and channel ISR John Garry
2017-06-14 15:33 ` [PATCH v6 14/22] scsi: hisi_sas: add v3 cq interrupt handler John Garry
2017-06-14 15:33 ` [PATCH v6 15/22] scsi: hisi_sas: add v3 code to send SSP frame John Garry
2017-06-14 15:33 ` [PATCH v6 16/22] scsi: hisi_sas: add v3 code to send SMP frame John Garry
2017-06-14 15:33 ` John Garry [this message]
2017-06-14 15:33 ` [PATCH v6 18/22] scsi: hisi_sas: add v3 code for itct setup and free John Garry
2017-06-14 15:33 ` [PATCH v6 19/22] scsi: hisi_sas: add v3 code to send internal abort command John Garry
2017-06-14 15:33 ` [PATCH v6 20/22] scsi: hisi_sas: add get_wideport_bitmap_v3_hw() John Garry
2017-06-14 15:33 ` [PATCH v6 21/22] scsi: hisi_sas: add v3 code to fill some more hw function pointers John Garry
2017-06-14 15:33 ` [PATCH v6 22/22] scsi: hisi_sas: modify internal abort dev flow for v3 hw John Garry
2017-06-20  1:41 ` [PATCH v6 00/22] hisi_sas: hip08 support Martin K. Petersen
2017-06-20  9:21   ` John Garry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1497454412-91194-18-git-send-email-john.garry@huawei.com \
    --to=john.garry@huawei.com \
    --cc=arnd@arndb.de \
    --cc=chenxiang66@hisilicon.com \
    --cc=hch@infradead.org \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox