From: John Garry <john.garry@huawei.com>
To: jejb@linux.vnet.ibm.com, martin.petersen@oracle.com
Cc: linuxarm@huawei.com, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org, arnd@arndb.de, hch@infradead.org,
Xiang Chen <chenxiang66@hisilicon.com>,
John Garry <john.garry@huawei.com>
Subject: [PATCH v6 22/22] scsi: hisi_sas: modify internal abort dev flow for v3 hw
Date: Wed, 14 Jun 2017 23:33:32 +0800 [thread overview]
Message-ID: <1497454412-91194-23-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1497454412-91194-1-git-send-email-john.garry@huawei.com>
From: Xiang Chen <chenxiang66@hisilicon.com>
There is a change for abort dev for v3 hw: add registers to configure
unaborted iptt for a device, and then inform this to logic.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 2 ++
drivers/scsi/hisi_sas/hisi_sas_main.c | 15 +++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 28 ++++++++++++++++++++++++++++
3 files changed, 45 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index e89f6ae..4fc2308 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -188,6 +188,8 @@ struct hisi_sas_hw {
void (*free_device)(struct hisi_hba *hisi_hba,
struct hisi_sas_device *dev);
int (*get_wideport_bitmap)(struct hisi_hba *hisi_hba, int port_id);
+ void (*dereg_device)(struct hisi_hba *hisi_hba,
+ struct domain_device *device);
int (*soft_reset)(struct hisi_hba *hisi_hba);
int max_command_entries;
int complete_hdr_size;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 0a32211..0e2db9a 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -727,6 +727,13 @@ static void hisi_sas_release_tasks(struct hisi_hba *hisi_hba)
}
}
+static void hisi_sas_dereg_device(struct hisi_hba *hisi_hba,
+ struct domain_device *device)
+{
+ if (hisi_hba->hw->dereg_device)
+ hisi_hba->hw->dereg_device(hisi_hba, device);
+}
+
static void hisi_sas_dev_gone(struct domain_device *device)
{
struct hisi_sas_device *sas_dev = device->lldd_dev;
@@ -740,6 +747,8 @@ static void hisi_sas_dev_gone(struct domain_device *device)
hisi_sas_internal_task_abort(hisi_hba, device,
HISI_SAS_INT_ABT_DEV, 0);
+ hisi_sas_dereg_device(hisi_hba, device);
+
hisi_hba->hw->free_device(hisi_hba, sas_dev);
device->lldd_dev = NULL;
memset(sas_dev, 0, sizeof(*sas_dev));
@@ -1071,6 +1080,7 @@ static int hisi_sas_abort_task(struct sas_task *task)
if (task->dev->dev_type == SAS_SATA_DEV) {
hisi_sas_internal_task_abort(hisi_hba, device,
HISI_SAS_INT_ABT_DEV, 0);
+ hisi_sas_dereg_device(hisi_hba, device);
rc = hisi_sas_softreset_ata_disk(device);
}
} else if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SMP) {
@@ -1137,6 +1147,10 @@ static int hisi_sas_I_T_nexus_reset(struct domain_device *device)
return TMF_RESP_FUNC_FAILED;
sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+ hisi_sas_internal_task_abort(hisi_hba, device,
+ HISI_SAS_INT_ABT_DEV, 0);
+ hisi_sas_dereg_device(hisi_hba, device);
+
rc = hisi_sas_debug_I_T_nexus_reset(device);
if (rc == TMF_RESP_FUNC_COMPLETE) {
@@ -1164,6 +1178,7 @@ static int hisi_sas_lu_reset(struct domain_device *device, u8 *lun)
HISI_SAS_INT_ABT_DEV, 0);
if (rc == TMF_RESP_FUNC_FAILED)
goto out;
+ hisi_sas_dereg_device(hisi_hba, device);
phy = sas_get_local_phy(device);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index cf1eb47..c998b81 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -50,6 +50,10 @@
#define CFG_ABT_SET_QUERY_IPTT 0xd4
#define CFG_SET_ABORTED_IPTT_OFF 0
#define CFG_SET_ABORTED_IPTT_MSK (0xfff << CFG_SET_ABORTED_IPTT_OFF)
+#define CFG_SET_ABORTED_EN_OFF 12
+#define CFG_ABT_SET_IPTT_DONE 0xd8
+#define CFG_ABT_SET_IPTT_DONE_OFF 0
+#define HGC_IOMB_PROC1_STATUS 0x104
#define CFG_1US_TIMER_TRSH 0xcc
#define CHNL_INT_STATUS 0x148
#define INT_COAL_EN 0x19c
@@ -583,6 +587,29 @@ static void free_device_v3_hw(struct hisi_hba *hisi_hba,
}
}
+static void dereg_device_v3_hw(struct hisi_hba *hisi_hba,
+ struct domain_device *device)
+{
+ struct hisi_sas_slot *slot, *slot2;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ u32 cfg_abt_set_query_iptt;
+
+ cfg_abt_set_query_iptt = hisi_sas_read32(hisi_hba,
+ CFG_ABT_SET_QUERY_IPTT);
+ list_for_each_entry_safe(slot, slot2, &sas_dev->list, entry) {
+ cfg_abt_set_query_iptt &= ~CFG_SET_ABORTED_IPTT_MSK;
+ cfg_abt_set_query_iptt |= (1 << CFG_SET_ABORTED_EN_OFF) |
+ (slot->idx << CFG_SET_ABORTED_IPTT_OFF);
+ hisi_sas_write32(hisi_hba, CFG_ABT_SET_QUERY_IPTT,
+ cfg_abt_set_query_iptt);
+ }
+ cfg_abt_set_query_iptt &= ~(1 << CFG_SET_ABORTED_EN_OFF);
+ hisi_sas_write32(hisi_hba, CFG_ABT_SET_QUERY_IPTT,
+ cfg_abt_set_query_iptt);
+ hisi_sas_write32(hisi_hba, CFG_ABT_SET_IPTT_DONE,
+ 1 << CFG_ABT_SET_IPTT_DONE_OFF);
+}
+
static int hw_init_v3_hw(struct hisi_hba *hisi_hba)
{
init_reg_v3_hw(hisi_hba);
@@ -1613,6 +1640,7 @@ static int hisi_sas_v3_init(struct hisi_hba *hisi_hba)
.phy_disable = disable_phy_v3_hw,
.phy_hard_reset = phy_hard_reset_v3_hw,
.phy_get_max_linkrate = phy_get_max_linkrate_v3_hw,
+ .dereg_device = dereg_device_v3_hw,
};
static struct Scsi_Host *
--
1.9.1
next prev parent reply other threads:[~2017-06-14 15:33 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-14 15:33 [PATCH v6 00/22] hisi_sas: hip08 support John Garry
2017-06-14 15:33 ` [PATCH v6 01/22] scsi: hisi_sas: fix timeout check in hisi_sas_internal_task_abort() John Garry
2017-06-14 15:33 ` [PATCH v6 02/22] scsi: hisi_sas: define hisi_sas_device.device_id as int John Garry
2017-06-14 15:33 ` [PATCH v6 03/22] scsi: hisi_sas: optimise the usage of hisi_hba.lock John Garry
2017-06-14 15:33 ` [PATCH v6 04/22] scsi: hisi_sas: relocate get_ata_protocol() John Garry
2017-06-14 15:33 ` [PATCH v6 05/22] scsi: hisi_sas: relocate sata_done_v2_hw() John Garry
2017-06-14 15:33 ` [PATCH v6 06/22] scsi: hisi_sas: relocate get_ncq_tag_v2_hw() John Garry
2017-06-14 15:33 ` [PATCH v6 07/22] scsi: hisi_sas: add pci_dev in hisi_hba struct John Garry
2017-06-14 15:33 ` [PATCH v6 08/22] scsi: hisi_sas: create hisi_sas_get_fw_info() John Garry
2017-06-14 15:33 ` [PATCH v6 09/22] scsi: hisi_sas: add skeleton v3 hw driver John Garry
2017-06-14 15:33 ` [PATCH v6 10/22] scsi: hisi_sas: add initialisation for v3 pci-based controller John Garry
2017-06-14 15:33 ` [PATCH v6 11/22] scsi: hisi_sas: add v3 hw init John Garry
2017-06-14 15:33 ` [PATCH v6 12/22] scsi: hisi_sas: add v3 hw PHY init John Garry
2017-06-14 15:33 ` [PATCH v6 13/22] scsi: hisi_sas: add phy up/down/bcast and channel ISR John Garry
2017-06-14 15:33 ` [PATCH v6 14/22] scsi: hisi_sas: add v3 cq interrupt handler John Garry
2017-06-14 15:33 ` [PATCH v6 15/22] scsi: hisi_sas: add v3 code to send SSP frame John Garry
2017-06-14 15:33 ` [PATCH v6 16/22] scsi: hisi_sas: add v3 code to send SMP frame John Garry
2017-06-14 15:33 ` [PATCH v6 17/22] scsi: hisi_sas: add v3 code to send ATA frame John Garry
2017-06-14 15:33 ` [PATCH v6 18/22] scsi: hisi_sas: add v3 code for itct setup and free John Garry
2017-06-14 15:33 ` [PATCH v6 19/22] scsi: hisi_sas: add v3 code to send internal abort command John Garry
2017-06-14 15:33 ` [PATCH v6 20/22] scsi: hisi_sas: add get_wideport_bitmap_v3_hw() John Garry
2017-06-14 15:33 ` [PATCH v6 21/22] scsi: hisi_sas: add v3 code to fill some more hw function pointers John Garry
2017-06-14 15:33 ` John Garry [this message]
2017-06-20 1:41 ` [PATCH v6 00/22] hisi_sas: hip08 support Martin K. Petersen
2017-06-20 9:21 ` John Garry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1497454412-91194-23-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=arnd@arndb.de \
--cc=chenxiang66@hisilicon.com \
--cc=hch@infradead.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox