[PATCH v1] scsi: ufs: Re-factor ufshcd_get_pwr_dev_param

[PATCH v1] scsi: ufs: Re-factor ufshcd_get_pwr_dev_param

[stanley.chu-NuS5LvNUpcJWk0Htik3J/w]

Hello,

This series re-factors ufshcd_get_pwr_dev_param in vendors' drivers. This function is for vendors to decide finally agreed attributes for power mode change if vendors define
their host capability in struct ufs_dev_params. Because it is using by both ufs-qcom and ufs-hisi currently and may be used in other vendors in the future, simply re-factor it and then evevry vendors can reuse it.

[PATCH v1 0/3] scsi: ufs: Re-factor ufshcd_get_pwr_dev_param

[stanley.chu-NuS5LvNUpcJWk0Htik3J/w]

From: Stanley Chu <stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

Hello,

This series re-factors ufshcd_get_pwr_dev_param in vendors' drivers. This function is for vendors to decide finally agreed attributes for power mode change if vendors define
their host capability in struct ufs_dev_params. Because it is using by both ufs-qcom and ufs-hisi currently and may be used in other vendors in the future, simply re-factor it and then evevry vendors can reuse it.

Stanley Chu (3):
  scsi: ufs: Introduce ufshcd_get_pwr_dev_param
  scsi: ufs-qcom: Re-factor ufshcd_get_pwr_dev_param
  scsi: ufs-hisi: Re-factor ufshcd_get_pwr_dev_param

 drivers/scsi/ufs/ufs-hisi.c      | 109 ++-----------------------------
 drivers/scsi/ufs/ufs-qcom.c      | 106 ++----------------------------
 drivers/scsi/ufs/ufshcd-pltfrm.c |  98 +++++++++++++++++++++++++++
 drivers/scsi/ufs/ufshcd-pltfrm.h |  21 ++++++
 4 files changed, 127 insertions(+), 207 deletions(-)

-- 
2.18.0

RE: [PATCH v1 0/3] scsi: ufs: Re-factor ufshcd_get_pwr_dev_param

[Avri Altman]

Hi,

> Hello,
> 
> This series re-factors ufshcd_get_pwr_dev_param in vendors' drivers. This
> function is for vendors to decide finally agreed attributes for power mode
> change if vendors define
> their host capability in struct ufs_dev_params. Because it is using by both
> ufs-qcom and ufs-hisi currently and may be used in other vendors in the
> future, simply re-factor it and then evevry vendors can reuse it.
> 
> Stanley Chu (3):
>   scsi: ufs: Introduce ufshcd_get_pwr_dev_param
>   scsi: ufs-qcom: Re-factor ufshcd_get_pwr_dev_param
>   scsi: ufs-hisi: Re-factor ufshcd_get_pwr_dev_param
I think its fine to do all this in a single patch as part of your "Add Mediatek..." series,
So it won't get unnecessarily delayed.

Looks fine to me.

Thanks,
Avri

RE: [PATCH v1 0/3] scsi: ufs: Re-factor ufshcd_get_pwr_dev_param

[Stanley Chu]

Hi Avri,

Thanks so much for consideration.

Then I will combine this series to "scsi: ufs-mediatek: Add UFS support
for Mediatek SoC chips" and upload a completed version later.

On Mon, 2019-02-25 at 08:54 +0000, Avri Altman wrote:
> Hi,
> 
> > Hello,
> > 
> > This series re-factors ufshcd_get_pwr_dev_param in vendors' drivers. This
> > function is for vendors to decide finally agreed attributes for power mode
> > change if vendors define
> > their host capability in struct ufs_dev_params. Because it is using by both
> > ufs-qcom and ufs-hisi currently and may be used in other vendors in the
> > future, simply re-factor it and then evevry vendors can reuse it.
> > 
> > Stanley Chu (3):
> >   scsi: ufs: Introduce ufshcd_get_pwr_dev_param
> >   scsi: ufs-qcom: Re-factor ufshcd_get_pwr_dev_param
> >   scsi: ufs-hisi: Re-factor ufshcd_get_pwr_dev_param
> I think its fine to do all this in a single patch as part of your "Add Mediatek..." series,
> So it won't get unnecessarily delayed.
> 
> Looks fine to me.
> 
> Thanks,
> Avri

Thanks,
Stanley

> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v1 1/3] scsi: ufs: Introduce ufshcd_get_pwr_dev_param

[stanley.chu-NuS5LvNUpcJWk0Htik3J/w]

From: Stanley Chu <stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

ufshcd_get_pwr_dev_param is for vendors to decide finally
agreed attributes for power mode change if vendors define
their host capability in struct ufs_dev_params.

This api is using by both ufs-qcom and ufs-hisi now and
will also be used in ufs-mediatek. Simply re-factor it
and then evevry vendors can reuse it.

Signed-off-by: Stanley Chu <stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 drivers/scsi/ufs/ufshcd-pltfrm.c | 98 ++++++++++++++++++++++++++++++++
 drivers/scsi/ufs/ufshcd-pltfrm.h | 21 +++++++
 2 files changed, 119 insertions(+)

diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 895a9b5ac989..508c561c9a62 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -39,6 +39,7 @@
 
 #include "ufshcd.h"
 #include "ufshcd-pltfrm.h"
+#include "unipro.h"
 
 #define UFSHCD_DEFAULT_LANES_PER_DIRECTION		2
 
@@ -289,6 +290,103 @@ static void ufshcd_init_lanes_per_dir(struct ufs_hba *hba)
 	}
 }
 
+/**
+ * ufshcd_get_pwr_dev_param - get finally agreed attributes for
+ *                            power mode change
+ * @pltfrm_param: pointer to platform parameters
+ * @dev_max: pointer to device attributes
+ * @agreed_pwr: returned agreed attributes
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_get_pwr_dev_param(struct ufs_dev_params *pltfrm_param,
+			     struct ufs_pa_layer_attr *dev_max,
+			     struct ufs_pa_layer_attr *agreed_pwr)
+{
+	int min_pltfrm_gear;
+	int min_dev_gear;
+	bool is_dev_sup_hs = false;
+	bool is_pltfrm_max_hs = false;
+
+	if (dev_max->pwr_rx == FAST_MODE)
+		is_dev_sup_hs = true;
+
+	if (pltfrm_param->desired_working_mode == UFS_HS_MODE) {
+		is_pltfrm_max_hs = true;
+		min_pltfrm_gear = min_t(u32, pltfrm_param->hs_rx_gear,
+					pltfrm_param->hs_tx_gear);
+	} else {
+		min_pltfrm_gear = min_t(u32, pltfrm_param->pwm_rx_gear,
+					pltfrm_param->pwm_tx_gear);
+	}
+
+	/*
+	 * device doesn't support HS but
+	 * pltfrm_param->desired_working_mode is HS,
+	 * thus device and pltfrm_param don't agree
+	 */
+	if (!is_dev_sup_hs && is_pltfrm_max_hs) {
+		pr_info("%s: device doesn't support HS\n",
+			__func__);
+		return -ENOTSUPP;
+	} else if (is_dev_sup_hs && is_pltfrm_max_hs) {
+		/*
+		 * since device supports HS, it supports FAST_MODE.
+		 * since pltfrm_param->desired_working_mode is also HS
+		 * then final decision (FAST/FASTAUTO) is done according
+		 * to pltfrm_params as it is the restricting factor
+		 */
+		agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_hs;
+		agreed_pwr->pwr_tx = agreed_pwr->pwr_rx;
+	} else {
+		/*
+		 * here pltfrm_param->desired_working_mode is PWM.
+		 * it doesn't matter whether device supports HS or PWM,
+		 * in both cases pltfrm_param->desired_working_mode will
+		 * determine the mode
+		 */
+		agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_pwm;
+		agreed_pwr->pwr_tx = agreed_pwr->pwr_rx;
+	}
+
+	/*
+	 * we would like tx to work in the minimum number of lanes
+	 * between device capability and vendor preferences.
+	 * the same decision will be made for rx
+	 */
+	agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx,
+				    pltfrm_param->tx_lanes);
+	agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx,
+				    pltfrm_param->rx_lanes);
+
+	/* device maximum gear is the minimum between device rx and tx gears */
+	min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
+
+	/*
+	 * if both device capabilities and vendor pre-defined preferences are
+	 * both HS or both PWM then set the minimum gear to be the chosen
+	 * working gear.
+	 * if one is PWM and one is HS then the one that is PWM get to decide
+	 * what is the gear, as it is the one that also decided previously what
+	 * pwr the device will be configured to.
+	 */
+	if ((is_dev_sup_hs && is_pltfrm_max_hs) ||
+	    (!is_dev_sup_hs && !is_pltfrm_max_hs)) {
+		agreed_pwr->gear_rx =
+			min_t(u32, min_dev_gear, min_pltfrm_gear);
+	} else if (!is_dev_sup_hs) {
+		agreed_pwr->gear_rx = min_dev_gear;
+	} else {
+		agreed_pwr->gear_rx = min_pltfrm_gear;
+	}
+	agreed_pwr->gear_tx = agreed_pwr->gear_rx;
+
+	agreed_pwr->hs_rate = pltfrm_param->hs_rate;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ufshcd_get_pwr_dev_param);
+
 /**
  * ufshcd_pltfrm_init - probe routine of the driver
  * @pdev: pointer to Platform device handle
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.h b/drivers/scsi/ufs/ufshcd-pltfrm.h
index df64c4180340..af85fb37e433 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.h
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.h
@@ -16,6 +16,27 @@
 
 #include "ufshcd.h"
 
+#define UFS_PWR_MODE 1
+#define UFS_HS_MODE 2
+
+struct ufs_dev_params {
+	u32 pwm_rx_gear;        /* pwm rx gear to work in */
+	u32 pwm_tx_gear;        /* pwm tx gear to work in */
+	u32 hs_rx_gear;         /* hs rx gear to work in */
+	u32 hs_tx_gear;         /* hs tx gear to work in */
+	u32 rx_lanes;           /* number of rx lanes */
+	u32 tx_lanes;           /* number of tx lanes */
+	u32 rx_pwr_pwm;         /* rx pwm working pwr */
+	u32 tx_pwr_pwm;         /* tx pwm working pwr */
+	u32 rx_pwr_hs;          /* rx hs working pwr */
+	u32 tx_pwr_hs;          /* tx hs working pwr */
+	u32 hs_rate;            /* rate A/B to work in HS */
+	u32 desired_working_mode;
+};
+
+int ufshcd_get_pwr_dev_param(struct ufs_dev_params *dev_param,
+			     struct ufs_pa_layer_attr *dev_max,
+			     struct ufs_pa_layer_attr *agreed_pwr);
 int ufshcd_pltfrm_init(struct platform_device *pdev,
 		       struct ufs_hba_variant_ops *vops);
 void ufshcd_pltfrm_shutdown(struct platform_device *pdev);
-- 
2.18.0

[PATCH v1 2/3] scsi: ufs-qcom: Re-factor ufshcd_get_pwr_dev_param

[stanley.chu-NuS5LvNUpcJWk0Htik3J/w]

From: Stanley Chu <stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

ufshcd_get_pwr_dev_param function and ufs_dev_params struct
are re-factored to ufs common driver thus change the way this
driver used.

Signed-off-by: Stanley Chu <stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 drivers/scsi/ufs/ufs-qcom.c | 106 ++----------------------------------
 1 file changed, 4 insertions(+), 102 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 3aeadb14aae1..a6b6f6eb9061 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -595,104 +595,6 @@ static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	return err;
 }
 
-struct ufs_qcom_dev_params {
-	u32 pwm_rx_gear;	/* pwm rx gear to work in */
-	u32 pwm_tx_gear;	/* pwm tx gear to work in */
-	u32 hs_rx_gear;		/* hs rx gear to work in */
-	u32 hs_tx_gear;		/* hs tx gear to work in */
-	u32 rx_lanes;		/* number of rx lanes */
-	u32 tx_lanes;		/* number of tx lanes */
-	u32 rx_pwr_pwm;		/* rx pwm working pwr */
-	u32 tx_pwr_pwm;		/* tx pwm working pwr */
-	u32 rx_pwr_hs;		/* rx hs working pwr */
-	u32 tx_pwr_hs;		/* tx hs working pwr */
-	u32 hs_rate;		/* rate A/B to work in HS */
-	u32 desired_working_mode;
-};
-
-static int ufs_qcom_get_pwr_dev_param(struct ufs_qcom_dev_params *qcom_param,
-				      struct ufs_pa_layer_attr *dev_max,
-				      struct ufs_pa_layer_attr *agreed_pwr)
-{
-	int min_qcom_gear;
-	int min_dev_gear;
-	bool is_dev_sup_hs = false;
-	bool is_qcom_max_hs = false;
-
-	if (dev_max->pwr_rx == FAST_MODE)
-		is_dev_sup_hs = true;
-
-	if (qcom_param->desired_working_mode == FAST) {
-		is_qcom_max_hs = true;
-		min_qcom_gear = min_t(u32, qcom_param->hs_rx_gear,
-				      qcom_param->hs_tx_gear);
-	} else {
-		min_qcom_gear = min_t(u32, qcom_param->pwm_rx_gear,
-				      qcom_param->pwm_tx_gear);
-	}
-
-	/*
-	 * device doesn't support HS but qcom_param->desired_working_mode is
-	 * HS, thus device and qcom_param don't agree
-	 */
-	if (!is_dev_sup_hs && is_qcom_max_hs) {
-		pr_err("%s: failed to agree on power mode (device doesn't support HS but requested power is HS)\n",
-			__func__);
-		return -ENOTSUPP;
-	} else if (is_dev_sup_hs && is_qcom_max_hs) {
-		/*
-		 * since device supports HS, it supports FAST_MODE.
-		 * since qcom_param->desired_working_mode is also HS
-		 * then final decision (FAST/FASTAUTO) is done according
-		 * to qcom_params as it is the restricting factor
-		 */
-		agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
-						qcom_param->rx_pwr_hs;
-	} else {
-		/*
-		 * here qcom_param->desired_working_mode is PWM.
-		 * it doesn't matter whether device supports HS or PWM,
-		 * in both cases qcom_param->desired_working_mode will
-		 * determine the mode
-		 */
-		 agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
-						qcom_param->rx_pwr_pwm;
-	}
-
-	/*
-	 * we would like tx to work in the minimum number of lanes
-	 * between device capability and vendor preferences.
-	 * the same decision will be made for rx
-	 */
-	agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx,
-						qcom_param->tx_lanes);
-	agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx,
-						qcom_param->rx_lanes);
-
-	/* device maximum gear is the minimum between device rx and tx gears */
-	min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
-
-	/*
-	 * if both device capabilities and vendor pre-defined preferences are
-	 * both HS or both PWM then set the minimum gear to be the chosen
-	 * working gear.
-	 * if one is PWM and one is HS then the one that is PWM get to decide
-	 * what is the gear, as it is the one that also decided previously what
-	 * pwr the device will be configured to.
-	 */
-	if ((is_dev_sup_hs && is_qcom_max_hs) ||
-	    (!is_dev_sup_hs && !is_qcom_max_hs))
-		agreed_pwr->gear_rx = agreed_pwr->gear_tx =
-			min_t(u32, min_dev_gear, min_qcom_gear);
-	else if (!is_dev_sup_hs)
-		agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_dev_gear;
-	else
-		agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_qcom_gear;
-
-	agreed_pwr->hs_rate = qcom_param->hs_rate;
-	return 0;
-}
-
 #ifdef CONFIG_MSM_BUS_SCALING
 static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
 		const char *speed_mode)
@@ -920,7 +822,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
 {
 	u32 val;
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	struct ufs_qcom_dev_params ufs_qcom_cap;
+	struct ufs_dev_params ufs_qcom_cap;
 	int ret = 0;
 
 	if (!dev_req_params) {
@@ -959,9 +861,9 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
 				ufs_qcom_cap.hs_rx_gear = UFS_HS_G2;
 		}
 
-		ret = ufs_qcom_get_pwr_dev_param(&ufs_qcom_cap,
-						 dev_max_params,
-						 dev_req_params);
+		ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap,
+					       dev_max_params,
+					       dev_req_params);
 		if (ret) {
 			pr_err("%s: failed to determine capabilities\n",
 					__func__);
-- 
2.18.0

[PATCH v1 3/3] scsi: ufs-hisi: Re-factor ufshcd_get_pwr_dev_param

[stanley.chu-NuS5LvNUpcJWk0Htik3J/w]

From: Stanley Chu <stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

ufshcd_get_pwr_dev_param function and ufs_dev_params struct
are re-factored to ufs common driver thus change the way this
driver used.

Signed-off-by: Stanley Chu <stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 drivers/scsi/ufs/ufs-hisi.c | 109 ++----------------------------------
 1 file changed, 4 insertions(+), 105 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
index 452e19f8fb47..01faad26ec26 100644
--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -272,108 +272,7 @@ static int ufs_hi3660_link_startup_notify(struct ufs_hba *hba,
 	return err;
 }
 
-struct ufs_hisi_dev_params {
-	u32 pwm_rx_gear; /* pwm rx gear to work in */
-	u32 pwm_tx_gear; /* pwm tx gear to work in */
-	u32 hs_rx_gear;  /* hs rx gear to work in */
-	u32 hs_tx_gear;  /* hs tx gear to work in */
-	u32 rx_lanes;    /* number of rx lanes */
-	u32 tx_lanes;    /* number of tx lanes */
-	u32 rx_pwr_pwm;  /* rx pwm working pwr */
-	u32 tx_pwr_pwm;  /* tx pwm working pwr */
-	u32 rx_pwr_hs;   /* rx hs working pwr */
-	u32 tx_pwr_hs;   /* tx hs working pwr */
-	u32 hs_rate;     /* rate A/B to work in HS */
-	u32 desired_working_mode;
-};
-
-static int ufs_hisi_get_pwr_dev_param(
-				    struct ufs_hisi_dev_params *hisi_param,
-				    struct ufs_pa_layer_attr *dev_max,
-				    struct ufs_pa_layer_attr *agreed_pwr)
-{
-	int min_hisi_gear;
-	int min_dev_gear;
-	bool is_dev_sup_hs = false;
-	bool is_hisi_max_hs = false;
-
-	if (dev_max->pwr_rx == FASTAUTO_MODE || dev_max->pwr_rx == FAST_MODE)
-		is_dev_sup_hs = true;
-
-	if (hisi_param->desired_working_mode == FAST) {
-		is_hisi_max_hs = true;
-		min_hisi_gear = min_t(u32, hisi_param->hs_rx_gear,
-				       hisi_param->hs_tx_gear);
-	} else {
-		min_hisi_gear = min_t(u32, hisi_param->pwm_rx_gear,
-				       hisi_param->pwm_tx_gear);
-	}
-
-	/*
-	 * device doesn't support HS but
-	 * hisi_param->desired_working_mode is HS,
-	 * thus device and hisi_param don't agree
-	 */
-	if (!is_dev_sup_hs && is_hisi_max_hs) {
-		pr_err("%s: device not support HS\n", __func__);
-		return -ENOTSUPP;
-	} else if (is_dev_sup_hs && is_hisi_max_hs) {
-		/*
-		 * since device supports HS, it supports FAST_MODE.
-		 * since hisi_param->desired_working_mode is also HS
-		 * then final decision (FAST/FASTAUTO) is done according
-		 * to hisi_params as it is the restricting factor
-		 */
-		agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
-			hisi_param->rx_pwr_hs;
-	} else {
-		/*
-		 * here hisi_param->desired_working_mode is PWM.
-		 * it doesn't matter whether device supports HS or PWM,
-		 * in both cases hisi_param->desired_working_mode will
-		 * determine the mode
-		 */
-		agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
-			hisi_param->rx_pwr_pwm;
-	}
-
-	/*
-	 * we would like tx to work in the minimum number of lanes
-	 * between device capability and vendor preferences.
-	 * the same decision will be made for rx
-	 */
-	agreed_pwr->lane_tx =
-		min_t(u32, dev_max->lane_tx, hisi_param->tx_lanes);
-	agreed_pwr->lane_rx =
-		min_t(u32, dev_max->lane_rx, hisi_param->rx_lanes);
-
-	/* device maximum gear is the minimum between device rx and tx gears */
-	min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
-
-	/*
-	 * if both device capabilities and vendor pre-defined preferences are
-	 * both HS or both PWM then set the minimum gear to be the chosen
-	 * working gear.
-	 * if one is PWM and one is HS then the one that is PWM get to decide
-	 * what is the gear, as it is the one that also decided previously what
-	 * pwr the device will be configured to.
-	 */
-	if ((is_dev_sup_hs && is_hisi_max_hs) ||
-	    (!is_dev_sup_hs && !is_hisi_max_hs))
-		agreed_pwr->gear_rx = agreed_pwr->gear_tx =
-			min_t(u32, min_dev_gear, min_hisi_gear);
-	else
-		agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_hisi_gear;
-
-	agreed_pwr->hs_rate = hisi_param->hs_rate;
-
-	pr_info("ufs final power mode: gear = %d, lane = %d, pwr = %d, rate = %d\n",
-		agreed_pwr->gear_rx, agreed_pwr->lane_rx, agreed_pwr->pwr_rx,
-		agreed_pwr->hs_rate);
-	return 0;
-}
-
-static void ufs_hisi_set_dev_cap(struct ufs_hisi_dev_params *hisi_param)
+static void ufs_hisi_set_dev_cap(struct ufs_dev_params *hisi_param)
 {
 	hisi_param->rx_lanes = UFS_HISI_LIMIT_NUM_LANES_RX;
 	hisi_param->tx_lanes = UFS_HISI_LIMIT_NUM_LANES_TX;
@@ -434,7 +333,7 @@ static int ufs_hi3660_pwr_change_notify(struct ufs_hba *hba,
 				       struct ufs_pa_layer_attr *dev_max_params,
 				       struct ufs_pa_layer_attr *dev_req_params)
 {
-	struct ufs_hisi_dev_params ufs_hisi_cap;
+	struct ufs_dev_params ufs_hisi_cap;
 	int ret = 0;
 
 	if (!dev_req_params) {
@@ -447,8 +346,8 @@ static int ufs_hi3660_pwr_change_notify(struct ufs_hba *hba,
 	switch (status) {
 	case PRE_CHANGE:
 		ufs_hisi_set_dev_cap(&ufs_hisi_cap);
-		ret = ufs_hisi_get_pwr_dev_param(
-			&ufs_hisi_cap, dev_max_params, dev_req_params);
+		ret = ufshcd_get_pwr_dev_param(&ufs_hisi_cap,
+					       dev_max_params, dev_req_params);
 		if (ret) {
 			dev_err(hba->dev,
 			    "%s: failed to determine capabilities\n", __func__);
-- 
2.18.0