From: Micah Anderson <micah@riseup.net>
To: linux-scsi@vger.kernel.org
Subject: Cannot get device recognized on a megaraid
Date: Mon, 24 Nov 2003 10:30:35 -0600 [thread overview]
Message-ID: <20031124163035.GK4399@riseup.net> (raw)
Hi,
I've been fighting a megaraid card with one device, just trying to get
it recognized. The card has the latest bios, the drive is in a RAID 0
container. Boot up doesn't show it at all:
megaraid: no BIOS enabled.
There are two other scsi devices that we have on the machine, they are
recognized fine:
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi1, channel 0, id 2, lun 0
SCSI device sda: 17783240 512-byte hdwr sectors (9105 MB)
Partition check:
sda: sda1 sda2 sda3 sda4
sym53c875-0-<2,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 15)
SCSI device sdb: 8888924 512-byte hdwr sectors (4551 MB)
sdb: sdb1
What do we need to do to get the drive attached to the megaraid card
recognized?
Thanks,
micah
next reply other threads:[~2003-11-24 16:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-24 16:30 Micah Anderson [this message]
2003-11-24 20:34 ` Cannot get device recognized on a megaraid Matt Domsch
2003-11-24 23:10 ` Micah Anderson
-- strict thread matches above, loose matches on Subject: below --
2003-11-24 23:00 Mukker, Atul
2003-11-24 23:21 Matt_Domsch
2003-11-25 0:58 ` Micah Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031124163035.GK4399@riseup.net \
--to=micah@riseup.net \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox