From: Mark Watts <m.watts@eris.qinetiq.com>
To: linux-kernel@vger.kernel.org
Cc: Sergiusz Pawlowicz <ser@gnu.org>, linux-scsi@vger.kernel.org
Subject: Re: aacraid does not work on dual opteron box - 2.6.7-rc2
Date: Wed, 9 Jun 2004 12:50:25 +0100 [thread overview]
Message-ID: <200406091250.25860.m.watts@eris.qinetiq.com> (raw)
In-Reply-To: <20040609083142.GB23062@szafa>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
> Hello linux friends,
> sorry for bothering you, but current aacraid still does not
> work properly on my fresh dual opteron box & Adaptec 2120S
> RAID controler. It hungs always after modprobing sd_mod and
> disk access try.
>
<snip>
Not sure if this helps but I'm running a Dual Opteron 248 with 2 (two) Adaptec
AAR-2410SA cards in PCI-X slots on a Tyan S2885 board.
# uname -a
Linux localhost 2.6.3-7mdk-p3-smp-64GB #1 SMP Wed Mar 17 15:34:39 CET 2004
i686 unknown unknown GNU/Linux
Red Hat/Adaptec aacraid driver (1.1.2-lk1 Mar 17 2004)
AAC0: kernel 4.1.4 build 5934
AAC0: monitor 4.1.4 build 5934
AAC0: bios 4.1.0 build 5934
AAC0: serial ba7127fafaf001
scsi0 : aacraid
Vendor: ADAPTEC Model: AAR-2410SA RAID5 Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
AAC1: kernel 4.1.4 build 5934
AAC1: monitor 4.1.4 build 5934
AAC1: bios 4.1.0 build 5934
AAC1: serial bab51afafaf001
scsi1 : aacraid
Vendor: ADAPTEC Model: AAR-2410SA Mirro Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 216790272 512-byte hdwr sectors (110997 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 72263424 512-byte hdwr sectors (36999 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
SCSI device sdb: drive cache: write through
/dev/scsi/host1/bus0/target0/lun0: p1 p2 < p5 p6 >
Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0
AAC0 is a 4x36GB raid5 array with WD Raptor SATA drives
AAC1 is a 2x36GB raid1 mirror with the same drives
- From lsmod:
sd_mod 18592 6
aacraid 45248 4
scsi_mod 121552 2 sd_mod,aacraid
# uptime
13:55:38 up 22 days, 21:47, 1 user, load average: 0.00, 0.00, 0.00
This is a Mandrake 10.0 Official system.
Mark.
- --
Mark Watts
Senior Systems Engineer
QinetiQ Trusted Information Management
Trusted Solutions and Services group
GPG Public Key ID: 455420ED
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFAxvmBBn4EFUVUIO0RAobNAJ9VrbE2/gBxonNEw0kOyAGgXaU0+gCgimxx
gci7EWybhvIRmaStjcS5FLI=
=LyFx
-----END PGP SIGNATURE-----
prev parent reply other threads:[~2004-06-09 11:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-09 8:31 aacraid does not work on dual opteron box - 2.6.7-rc2 Sergiusz Pawlowicz
2004-06-09 11:50 ` Mark Watts [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200406091250.25860.m.watts@eris.qinetiq.com \
--to=m.watts@eris.qinetiq.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=ser@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox