From: jeykholt@cisco.com
To: linux-scsi@vger.kernel.org
Cc: jre@nuovasystems.com, ajoglekar@nuovasystems.com
Subject: [RFC][PATCH 2/6] fnic: add fnic_scsi.c and fnic_io.h.
Date: Fri, 22 Aug 2008 19:52:22 -0700 [thread overview]
Message-ID: <20080823025222.13569.37765.stgit@feynman.nuovasystems.com> (raw)
In-Reply-To: <20080823024949.13569.94133.stgit@feynman.nuovasystems.com>
fnic: add fnic_scsi.c and fnic_io.h.
fnic_scsi.c contains the FCP SCSI handling as well as firmware reset
and FLOGI registration handling.
fnic_io.h defines the per-request state structure.
Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
---
drivers/scsi/fnic/fnic_io.h | 65 ++
drivers/scsi/fnic/fnic_scsi.c | 1605 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 1670 insertions(+), 0 deletions(-)
create mode 100644 drivers/scsi/fnic/fnic_io.h
create mode 100644 drivers/scsi/fnic/fnic_scsi.c
diff --git a/drivers/scsi/fnic/fnic_io.h b/drivers/scsi/fnic/fnic_io.h
new file mode 100644
index 0000000..dacc7a6
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_io.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FNIC_IO_H_
+#define _FNIC_IO_H_
+
+#include <scsi/fc/fc_fcp.h>
+
+#define FNIC_DFLT_SG_DESC_CNT 32
+#define FNIC_MAX_SG_DESC_CNT 1024 /* Maximum descriptors per sgl */
+#define FNIC_SG_DESC_ALIGN 16 /* Descriptor address alignment */
+
+struct host_sg_desc {
+ __le64 addr;
+ __le32 len;
+ u32 _resvd;
+};
+
+struct fnic_dflt_sgl_list {
+ struct host_sg_desc sg_desc[FNIC_DFLT_SG_DESC_CNT];
+};
+
+struct fnic_sgl_list {
+ struct host_sg_desc sg_desc[FNIC_MAX_SG_DESC_CNT];
+};
+
+enum fnic_sgl_list_type {
+ FNIC_SGL_CACHE_DFLT = 0, /* cache with default size sgl */
+ FNIC_SGL_CACHE_MAX, /* cache with max size sgl */
+ FNIC_SGL_NUM_CACHES /* number of sgl caches */
+};
+
+enum fnic_ioreq_state {
+ FNIC_IOREQ_CMD_PENDING = 0,
+ FNIC_IOREQ_ABTS_PENDING,
+ FNIC_IOREQ_ABTS_COMPLETE,
+ FNIC_IOREQ_CMD_COMPLETE,
+};
+
+struct fnic_io_req {
+ struct host_sg_desc *sgl_list; /* sgl list */
+ dma_addr_t sense_buf_pa; /* dma address for sense buffer*/
+ dma_addr_t sgl_list_pa; /* dma address for sgl list */
+ u16 sgl_cnt;
+ u8 sgl_type; /* device DMA descriptor list type */
+ u8 io_completed:1; /* set to 1 when fw completes IO */
+ struct completion *abts_done; /* completion for abts */
+ struct completion *dr_done; /* completion for device reset */
+};
+
+#endif /* _FNIC_IO_H_ */
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
new file mode 100644
index 0000000..383b471
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -0,0 +1,1605 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/workqueue.h>
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+#include <linux/skbuff.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/kthread.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_fc.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/fc/fc_els.h>
+#include <scsi/fc/fc_fcoe.h>
+#include <scsi/libfc/libfc.h>
+#include <scsi/libfc/fc_frame.h>
+#include "fnic_io.h"
+#include "fnic.h"
+
+/*
+ * Usage of the scsi_cmnd scratchpad.
+ * These fields are locked by the hashed io_req_lock.
+ */
+#define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr)
+#define CMD_STATE(Cmnd) ((Cmnd)->SCp.phase)
+#define CMD_ABTS_STATUS(Cmnd) ((Cmnd)->SCp.Message)
+#define CMD_LR_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in)
+
+#define FCPIO_INVALID_CODE 0x100 /* hdr_status value unused by firmware */
+
+static const char *fnic_ioreq_state_str[] = {
+ [FNIC_IOREQ_CMD_PENDING] = "FNIC_IOREQ_CMD_PENDING",
+ [FNIC_IOREQ_ABTS_PENDING] = "FNIC_IOREQ_ABTS_PENDING",
+ [FNIC_IOREQ_ABTS_COMPLETE] = "FNIC_IOREQ_ABTS_COMPLETE",
+ [FNIC_IOREQ_CMD_COMPLETE] = "FNIC_IOREQ_CMD_COMPLETE",
+};
+
+static const char *fcpio_status_str[] = {
+ [FCPIO_SUCCESS] = "FCPIO_SUCCESS", /*0x0*/
+ [FCPIO_INVALID_HEADER] = "FCPIO_INVALID_HEADER",
+ [FCPIO_OUT_OF_RESOURCE] = "FCPIO_OUT_OF_RESOURCE",
+ [FCPIO_INVALID_PARAM] = "FCPIO_INVALID_PARAM]",
+ [FCPIO_REQ_NOT_SUPPORTED] = "FCPIO_REQ_NOT_SUPPORTED",
+ [FCPIO_IO_NOT_FOUND] = "FCPIO_IO_NOT_FOUND",
+ [FCPIO_ABORTED] = "FCPIO_ABORTED", /*0x41*/
+ [FCPIO_TIMEOUT] = "FCPIO_TIMEOUT",
+ [FCPIO_SGL_INVALID] = "FCPIO_SGL_INVALID",
+ [FCPIO_MSS_INVALID] = "FCPIO_MSS_INVALID",
+ [FCPIO_DATA_CNT_MISMATCH] = "FCPIO_DATA_CNT_MISMATCH",
+ [FCPIO_FW_ERR] = "FCPIO_FW_ERR",
+ [FCPIO_ITMF_REJECTED] = "FCPIO_ITMF_REJECTED",
+ [FCPIO_ITMF_FAILED] = "FCPIO_ITMF_FAILED",
+ [FCPIO_ITMF_INCORRECT_LUN] = "FCPIO_ITMF_INCORRECT_LUN",
+ [FCPIO_CMND_REJECTED] = "FCPIO_CMND_REJECTED",
+ [FCPIO_NO_PATH_AVAIL] = "FCPIO_NO_PATH_AVAIL",
+ [FCPIO_PATH_FAILED] = "FCPIO_PATH_FAILED",
+ [FCPIO_LUNMAP_CHNG_PEND] = "FCPIO_LUNHMAP_CHNG_PEND",
+};
+
+static void fnic_cleanup_io(struct fnic *fnic, int exclude_id);
+
+static inline spinlock_t *fnic_io_lock_hash(struct fnic *fnic,
+ struct scsi_cmnd *sc)
+{
+ u32 hash = sc->request->tag & (FNIC_IO_LOCKS - 1);
+
+ return &fnic->io_req_lock[hash];
+}
+
+/*
+ * Unmap the data buffer and sense buffer for an io_req,
+ * also unmap and free the device-private scatter/gather list.
+ */
+static void fnic_release_ioreq_buf(struct fnic *fnic,
+ struct fnic_io_req *io_req,
+ struct scsi_cmnd *sc)
+{
+ if (io_req->sgl_list_pa)
+ pci_unmap_single(fnic->pdev, io_req->sgl_list_pa,
+ sizeof(io_req->sgl_list[0]) * io_req->sgl_cnt,
+ PCI_DMA_TODEVICE);
+ scsi_dma_unmap(sc);
+ mempool_free(io_req->sgl_list, fnic->io_sgl_pool[io_req->sgl_type]);
+ if (io_req->sense_buf_pa)
+ pci_unmap_single(fnic->pdev, io_req->sense_buf_pa,
+ SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE);
+}
+
+/* Free up Copy Wq descriptors. Called with copy_wq lock held */
+static int free_wq_copy_descs(struct fnic *fnic, struct vnic_wq_copy *wq)
+{
+ /* if no Ack received from firmware, then nothing to clean */
+ if (!fnic->fw_ack_recd[0])
+ return 1;
+
+ /* Update desc_available count based on number of freed descriptors
+ * Account for wraparound
+ */
+ if (wq->to_clean_index <= fnic->fw_ack_index[0])
+ wq->ring.desc_avail += (fnic->fw_ack_index[0]
+ - wq->to_clean_index + 1);
+ else
+ wq->ring.desc_avail += (wq->ring.desc_count
+ - wq->to_clean_index
+ + fnic->fw_ack_index[0] + 1);
+
+ /* just bump clean index to ack_index+1 accounting for wraparound
+ * this will essentially free up all descriptors between
+ * to_clean_index and fw_ack_index, both inclusive
+ */
+ wq->to_clean_index =
+ (fnic->fw_ack_index[0] + 1) % wq->ring.desc_count;
+
+ /* we have processed the acks received so far */
+ fnic->fw_ack_recd[0] = 0;
+ return 0;
+}
+
+
+/*
+ * fnic_fw_reset_handler
+ * Routine to send reset msg to fw
+ */
+int fnic_fw_reset_handler(struct fnic *fnic)
+{
+ struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (!vnic_wq_copy_desc_avail(wq))
+ ret = -EAGAIN;
+ else
+ fnic_queue_wq_copy_desc_fw_reset(wq, SCSI_NO_TAG);
+
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+
+ if (!ret)
+ printk(KERN_DEBUG DFX "Issued fw reset\n", fnic->fnic_no);
+ else
+ printk(KERN_DEBUG DFX "Failed to issue fw reset\n",
+ fnic->fnic_no);
+ return ret;
+}
+
+
+/*
+ * fnic_flogi_reg_handler
+ * Routine to send flogi register msg to fw
+ */
+int fnic_flogi_reg_handler(struct fnic *fnic)
+{
+ struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ u8 gw_mac[ETH_ALEN];
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (!vnic_wq_copy_desc_avail(wq)) {
+ ret = -EAGAIN;
+ goto flogi_reg_ioreq_end;
+ }
+
+ if (fnic->fcoui_mode)
+ memset(gw_mac, 0xff, ETH_ALEN);
+ else
+ memcpy(gw_mac, fnic->dest_addr, ETH_ALEN);
+
+ fnic_queue_wq_copy_desc_flogi_reg(
+ wq,
+ SCSI_NO_TAG, /* host request id */
+ fnic->s_id, /* FC source id */
+ gw_mac, /* gateway mac */
+ fnic->data_src_addr, /* src mac */
+ fnic->config.ra_tov,
+ fnic->config.ed_tov
+ );
+
+flogi_reg_ioreq_end:
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+
+ if (!ret)
+ printk(KERN_DEBUG DFX "flog reg issued\n", fnic->fnic_no);
+
+ return ret;
+}
+
+/*
+ * fnic_queue_wq_copy_desc
+ * Routine to enqueue a wq copy desc
+ */
+static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
+ struct vnic_wq_copy *wq,
+ struct fnic_io_req *io_req,
+ struct scsi_cmnd *sc,
+ u32 sg_count)
+{
+ struct scatterlist *sg;
+ struct fc_rport *rport = starget_to_rport(scsi_target(sc->device));
+ struct fc_rport_libfc_priv *rp = rport->dd_data;
+ struct host_sg_desc *desc;
+ u8 pri_tag = 0;
+ unsigned int i;
+ unsigned long intr_flags;
+ int flags;
+ struct scsi_lun fc_lun;
+ char msg[2];
+
+ io_req->sgl_list_pa = 0;
+
+ if (sg_count) {
+ BUG_ON(sg_count < 0);
+ BUG_ON(sg_count > FNIC_MAX_SG_DESC_CNT);
+
+ /* For each SGE, create a device desc entry */
+ desc = io_req->sgl_list;
+ for_each_sg(scsi_sglist(sc), sg, sg_count, i) {
+ desc->addr = cpu_to_le64(sg_dma_address(sg));
+ desc->len = cpu_to_le32(sg_dma_len(sg));
+ desc->_resvd = 0;
+ desc++;
+ }
+
+ /* Get the physical address of the SGL that is passed
+ to device */
+ io_req->sgl_list_pa = pci_map_single
+ (fnic->pdev,
+ io_req->sgl_list,
+ sizeof(io_req->sgl_list[0]) * sg_count,
+ PCI_DMA_TODEVICE);
+ }
+
+ io_req->sense_buf_pa = pci_map_single(fnic->pdev,
+ sc->sense_buffer,
+ SCSI_SENSE_BUFFERSIZE,
+ PCI_DMA_FROMDEVICE);
+
+ int_to_scsilun(sc->device->lun, &fc_lun);
+
+ pri_tag = FCPIO_ICMND_PTA_SIMPLE;
+ msg[0] = MSG_SIMPLE_TAG;
+ BUG_ON(!scsi_populate_tag_msg(sc, msg));
+ if (msg[0] == MSG_ORDERED_TAG)
+ pri_tag = FCPIO_ICMND_PTA_ORDERED;
+
+ /* Enqueue the descriptor in the Copy WQ */
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (unlikely(!vnic_wq_copy_desc_avail(wq))) {
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+
+ flags = 0;
+ if (sc->sc_data_direction == DMA_FROM_DEVICE)
+ flags = FCPIO_ICMND_RDDATA;
+ else if (sc->sc_data_direction == DMA_TO_DEVICE)
+ flags = FCPIO_ICMND_WRDATA;
+
+ fnic_queue_wq_copy_desc_icmnd_16(
+ wq,
+ sc->request->tag, /* IO req id */
+ 0, /* lun map id */
+ 0, /* exch flags */
+ io_req->sgl_cnt, /* SGL count */
+ SCSI_SENSE_BUFFERSIZE, /* Sense len */
+ io_req->sgl_list_pa, /* ptr to sgl list */
+ io_req->sense_buf_pa, /* Sense buff */
+ 0, /* scsi cmd ref, always 0 */
+ pri_tag, /* scsi pri and tag */
+ flags, /* command flags */
+ sc->cmnd, /* CDB */
+ scsi_bufflen(sc), /* data buf len */
+ fc_lun.scsi_lun, /* FCP 8 byte lun */
+ rport->port_id, /* D_ID */
+ rport->maxframe_size, /* max frame size */
+ rp->r_a_tov, /* R_A_TOV */
+ rp->e_d_tov /* E_D_TOV */
+ );
+
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
+ return 0;
+}
+
+/*
+ * fnic_queuecommand
+ * Routine to send a scsi cdb
+ * Called with host_lock held and interrupts disabled.
+ */
+int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+{
+ struct fc_lport *lp;
+ struct fc_rport *rport;
+ struct fnic_io_req *io_req;
+ struct fnic *fnic;
+ struct vnic_wq_copy *wq;
+ int ret;
+ u32 sg_count;
+ unsigned long flags;
+
+ rport = starget_to_rport(scsi_target(sc->device));
+ ret = fc_remote_port_chkready(rport);
+ if (ret) {
+ sc->result = ret;
+ done(sc);
+ return 0;
+ }
+
+ lp = shost_priv(sc->device->host);
+ if (lp->state != LPORT_ST_READY || !(lp->link_status & FC_LINK_UP)) {
+ sc->result = DID_NO_CONNECT << 16;
+ done(sc);
+ return 0;
+ }
+
+ /* Release host lock, use driver resource specific locks from here.
+ * Don't re-enable interrupts in case they were disabled prior to the
+ * caller disabling them.
+ */
+ spin_unlock(lp->host->host_lock);
+
+ /* Get a new io_req for this SCSI IO */
+ fnic = lp->drv_priv;
+ io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC);
+ if (!io_req) {
+ ret = SCSI_MLQUEUE_HOST_BUSY;
+ goto out;
+ }
+ memset(io_req, 0, sizeof(*io_req));
+
+ /* Map the data buffer */
+ sg_count = scsi_dma_map(sc);
+
+ /* Determine the type of scatter/gather list we need */
+ io_req->sgl_cnt = sg_count;
+ io_req->sgl_type = FNIC_SGL_CACHE_DFLT;
+ if (sg_count > FNIC_DFLT_SG_DESC_CNT)
+ io_req->sgl_type = FNIC_SGL_CACHE_MAX;
+
+ if (sg_count) {
+ io_req->sgl_list =
+ mempool_alloc(fnic->io_sgl_pool[io_req->sgl_type],
+ GFP_ATOMIC | GFP_DMA);
+ if (!io_req->sgl_list) {
+ ret = SCSI_MLQUEUE_HOST_BUSY;
+ scsi_dma_unmap(sc);
+ mempool_free(io_req, fnic->io_req_pool);
+ goto out;
+ }
+ }
+
+ /* initialize rest of io_req */
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING;
+ CMD_SP(sc) = (char *)io_req;
+ sc->scsi_done = done;
+
+ /* create copy wq desc and enqueue it */
+ wq = &fnic->wq_copy[0];
+ ret = fnic_queue_wq_copy_desc(fnic, wq, io_req, sc, sg_count);
+ if (ret) {
+ /* In case another thread cancelled the request,
+ * refetch the pointer under the lock.
+ */
+ spinlock_t *io_lock = fnic_io_lock_hash(fnic, sc);
+
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ CMD_SP(sc) = NULL;
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
+ spin_unlock_irqrestore(io_lock, flags);
+ if (io_req) {
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+ }
+ }
+out:
+ /* acquire host lock before returning to SCSI */
+ spin_lock(lp->host->host_lock);
+ return ret;
+}
+
+/*
+ * fnic_fcpio_fw_reset_cmpl_handler
+ * Routine to handle fw reset completion
+ */
+static int fnic_fcpio_fw_reset_cmpl_handler(struct fnic *fnic,
+ struct fcpio_fw_req *desc)
+{
+ u8 type;
+ u8 hdr_status;
+ struct fcpio_tag tag;
+ int ret = 0;
+ struct fc_frame *flogi;
+ unsigned long flags;
+
+ fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+
+ /* Clean up all outstanding io requests */
+ fnic_cleanup_io(fnic, SCSI_NO_TAG);
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+
+ flogi = fnic->flogi;
+ fnic->flogi = NULL;
+
+ /* fnic should be in FC_TRANS_ETH_MODE */
+ if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) {
+ /* Check status of reset completion */
+ if (!hdr_status) {
+ printk(KERN_DEBUG DFX "reset cmpl success\n",
+ fnic->fnic_no);
+ /* Ready to send flogi out */
+ fnic->state = FNIC_IN_ETH_MODE;
+ } else {
+ printk(KERN_DEBUG DFX "fnic fw_reset : failed %s\n",
+ fnic->fnic_no, fcpio_status_str[hdr_status]);
+
+ /* Unable to change to eth mode, cannot send out flogi
+ * Change state to fc mode, so that subsequent Flogi
+ * requests from libFC will cause more attempts to
+ * reset the firmware. Free the cached flogi
+ */
+ fnic->state = FNIC_IN_FC_MODE;
+ ret = -1;
+ }
+ } else {
+ printk(KERN_DEBUG PFX "Unexpected state %s while processing"
+ " reset cmpl\n", fnic_state_str[fnic->state]);
+ ret = -1;
+ }
+
+ /* Thread issuing host reset blocks till firmware reset is complete */
+ if (fnic->reset_wait)
+ complete(fnic->reset_wait);
+
+ /* Thread removing device blocks till firmware reset is complete */
+ if (fnic->remove_wait)
+ complete(fnic->remove_wait);
+
+ /* If fnic is in host reset or being removed, or fw reset failed
+ * free the flogi frame. Else, send it out
+ */
+ if (fnic->remove_wait || fnic->reset_wait || ret) {
+ fnic->flogi_oxid = FC_XID_UNKNOWN;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ if (flogi)
+ fc_frame_free(flogi);
+ goto reset_cmpl_handler_end;
+ }
+
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (flogi)
+ ret = fnic_send_frame(fnic, flogi);
+
+ reset_cmpl_handler_end:
+ return ret;
+}
+
+/*
+ * fnic_fcpio_flogi_reg_cmpl_handler
+ * Routine to handle flogi register completion
+ */
+static int fnic_fcpio_flogi_reg_cmpl_handler(struct fnic *fnic,
+ struct fcpio_fw_req *desc)
+{
+ u8 type;
+ u8 hdr_status;
+ struct fcpio_tag tag;
+ struct fnic_event *event;
+ u8 list_was_empty;
+ int ret = 0;
+ struct fc_frame *flogi_resp = NULL;
+ unsigned long flags;
+
+ fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+
+ /* Update fnic state based on status of flogi reg completion */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+
+ flogi_resp = fnic->flogi_resp;
+ fnic->flogi_resp = NULL;
+
+ if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE) {
+
+ /* Check flogi registration completion status */
+ if (!hdr_status) {
+ printk(KERN_DEBUG DFX "flog reg succeeded\n",
+ fnic->fnic_no);
+ fnic->state = FNIC_IN_FC_MODE;
+ } else {
+ printk(KERN_DEBUG DFX "fnic flogi reg :failed %s\n",
+ fnic->fnic_no, fcpio_status_str[hdr_status]);
+ fnic->state = FNIC_IN_ETH_MODE;
+ ret = -1;
+ }
+ } else {
+ printk(KERN_DEBUG PFX "Unexpected fnic state %s while"
+ " processing flogi reg completion\n",
+ fnic_state_str[fnic->state]);
+ ret = -1;
+ }
+
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ /* Successful flogi reg cmpl, pass frame to LibFC */
+ if (!ret && flogi_resp) {
+ event = kmem_cache_alloc(fnic_ev_cache, GFP_ATOMIC);
+
+ if (!event) {
+ fc_frame_free(flogi_resp);
+ ret = -1;
+ goto reg_cmpl_handler_end;
+ }
+
+ memset(event, 0, sizeof(struct fnic_event));
+
+ /* initialize the event structure */
+ event->fp = flogi_resp;
+ fr_dev(flogi_resp) = fnic->lport;
+ event->fnic = fnic;
+ event->ev_type = EV_TYPE_FRAME;
+ event->is_flogi_resp_frame = 1;
+
+ /* insert it into event queue */
+ spin_lock_irqsave(&fnic_eventlist_lock, flags);
+ list_was_empty = list_empty(&fnic_eventlist);
+ list_add_tail(&event->list, &fnic_eventlist);
+ spin_unlock_irqrestore(&fnic_eventlist_lock, flags);
+ if (list_was_empty)
+ wake_up_process(fnic_thread);
+ } else
+ if (flogi_resp)
+ fc_frame_free(flogi_resp);
+
+reg_cmpl_handler_end:
+ return ret;
+}
+
+static inline int is_ack_index_in_range(struct vnic_wq_copy *wq,
+ u16 request_out)
+{
+ if (wq->to_clean_index <= wq->to_use_index) {
+ /* out of range, stale request_out index */
+ if (request_out < wq->to_clean_index ||
+ request_out >= wq->to_use_index)
+ return 0;
+ } else {
+ /* out of range, stale request_out index */
+ if (request_out < wq->to_clean_index &&
+ request_out >= wq->to_use_index)
+ return 0;
+ }
+ /* request_out index is in range */
+ return 1;
+}
+
+
+/* Mark that ack received and store the Ack index. If there are multiple
+ * acks received before Tx thread cleans it up, the latest value will be
+ * used which is correct behavior. This state should be in the copy Wq
+ * instead of in the fnic
+ */
+static inline void fnic_fcpio_ack_handler(struct fnic *fnic,
+ unsigned int cq_index,
+ struct fcpio_fw_req *desc)
+{
+ struct vnic_wq_copy *wq;
+ u16 request_out = desc->u.ack.request_out;
+ unsigned long flags;
+
+ /* mark the ack state */
+ wq = &fnic->wq_copy[cq_index - fnic->raw_wq_count - fnic->rq_count];
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+ if (is_ack_index_in_range(wq, request_out)) {
+ fnic->fw_ack_index[0] = request_out;
+ fnic->fw_ack_recd[0] = 1;
+ }
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+}
+
+/*
+ * fnic_fcpio_icmnd_cmpl_handler
+ * Routine to handle icmnd completions
+ */
+static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic,
+ struct fcpio_fw_req *desc)
+{
+ u8 type;
+ u8 hdr_status;
+ struct fcpio_tag tag;
+ u32 id;
+ u64 xfer_len = 0;
+ struct fcpio_icmnd_cmpl *icmnd_cmpl;
+ struct fnic_io_req *io_req;
+ struct scsi_cmnd *sc;
+ unsigned long flags;
+ spinlock_t *io_lock;
+
+ /* Decode the cmpl description to get the io_req id */
+ fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+ fcpio_tag_id_dec(&tag, &id);
+
+ if (id >= FNIC_MAX_IO_REQ)
+ return;
+ sc = scsi_host_find_tag(fnic->lport->host, id);
+ WARN_ON_ONCE(!sc);
+ if (!sc)
+ return;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ WARN_ON_ONCE(!io_req);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ return;
+ }
+
+ /* firmware completed the io */
+ io_req->io_completed = 1;
+
+ /* if SCSI-ML has already issued abort on this command,
+ * ignore completion of the IO. The abts path will clean it up
+ */
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto icmnd_cmpl_handler_end;
+ }
+
+ /* Mark the IO as complete */
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
+
+ icmnd_cmpl = &desc->u.icmnd_cmpl;
+
+ switch (hdr_status) {
+ case FCPIO_SUCCESS:
+ sc->result = (DID_OK << 16) | icmnd_cmpl->scsi_status;
+
+ xfer_len = scsi_bufflen(sc);
+ if (icmnd_cmpl->flags & FCPIO_ICMND_CMPL_RESID_UNDER) {
+ scsi_set_resid(sc, icmnd_cmpl->residual);
+ xfer_len -= icmnd_cmpl->residual;
+ if (icmnd_cmpl->scsi_status) {
+ sc->result = (DID_ERROR << 16) |
+ icmnd_cmpl->scsi_status;
+ xfer_len = 0;
+ }
+ }
+ if (icmnd_cmpl->flags & FCPIO_ICMND_CMPL_RESID_OVER) {
+ scsi_set_resid(sc, icmnd_cmpl->residual);
+ sc->result = (DID_ERROR << 16) |
+ icmnd_cmpl->scsi_status;
+ xfer_len = 0;
+ }
+
+ /* If queue_full, then try to reduce queue depth for all
+ * LUNS on the target. Note, this should be accompanied
+ * by a periodic queue_depth rampup based on successful
+ * IO completion. Currently, however, LibFC does not have
+ * state to keep track of when a remote port was last ramped
+ * up. Once we keep track of that state in libFC, we can
+ * ramp up the queue_depth in driver
+ */
+ if (icmnd_cmpl->scsi_status == QUEUE_FULL) {
+ struct scsi_device *t_sdev;
+ int qd = 0;
+
+ shost_for_each_device(t_sdev, sc->device->host) {
+ if (t_sdev->id != sc->device->id)
+ continue;
+
+ if (t_sdev->queue_depth > 1) {
+ qd = scsi_track_queue_full
+ (t_sdev,
+ t_sdev->queue_depth - 1);
+ if (qd == -1)
+ qd = t_sdev->host->cmd_per_lun;
+ printk(KERN_INFO DFX "scsi[%d:%d:%d:%d"
+ "] queue full detected, new"
+ " depth = %d\n", fnic->fnic_no,
+ t_sdev->host->host_no,
+ t_sdev->channel, t_sdev->id,
+ t_sdev->lun,
+ t_sdev->queue_depth);
+ }
+ }
+ }
+ break;
+
+ case FCPIO_TIMEOUT: /* request was timed out */
+ sc->result = (DID_TIME_OUT << 16) | icmnd_cmpl->scsi_status;
+ break;
+
+ case FCPIO_ABORTED: /* request was aborted */
+ sc->result = (DID_ABORT << 16) | icmnd_cmpl->scsi_status;
+ break;
+
+ case FCPIO_DATA_CNT_MISMATCH: /* recv/sent more/less data than exp. */
+ scsi_set_resid(sc, icmnd_cmpl->residual);
+ sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status;
+ break;
+
+ case FCPIO_OUT_OF_RESOURCE: /* out of resources to complete request */
+ sc->result = (DID_REQUEUE << 16) | icmnd_cmpl->scsi_status;
+ break;
+ case FCPIO_INVALID_HEADER: /* header contains invalid data */
+ case FCPIO_INVALID_PARAM: /* some parameter in request invalid */
+ case FCPIO_REQ_NOT_SUPPORTED:/* request type is not supported */
+ case FCPIO_IO_NOT_FOUND: /* requested I/O was not found */
+ case FCPIO_SGL_INVALID: /* request was aborted due to sgl error */
+ case FCPIO_MSS_INVALID: /* request was aborted due to mss error */
+ case FCPIO_FW_ERR: /* request was terminated due fw error */
+ default:
+ printk(KERN_ERR DFX "hdr status = %s\n", fnic->fnic_no,
+ fcpio_status_str[hdr_status]);
+ sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status;
+ break;
+ }
+
+ /* Break link with the SCSI command */
+ CMD_SP(sc) = NULL;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+
+ mempool_free(io_req, fnic->io_req_pool);
+
+ if (sc->sc_data_direction == DMA_FROM_DEVICE) {
+ fnic->lport->host_stats.fcp_input_requests++;
+ fnic->fcp_input_bytes += xfer_len;
+ } else if (sc->sc_data_direction == DMA_TO_DEVICE) {
+ fnic->lport->host_stats.fcp_output_requests++;
+ fnic->fcp_output_bytes += xfer_len;
+ } else
+ fnic->lport->host_stats.fcp_control_requests++;
+
+ /* Call SCSI completion function to complete the IO */
+ if (sc->scsi_done)
+ sc->scsi_done(sc);
+
+icmnd_cmpl_handler_end:
+ return;
+}
+
+/* fnic_fcpio_itmf_cmpl_handler
+ *
+ * Routine to handle itmf completions
+ */
+static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic,
+ struct fcpio_fw_req *desc)
+{
+ u8 type;
+ u8 hdr_status;
+ struct fcpio_tag tag;
+ u32 id;
+ struct scsi_cmnd *sc;
+ struct fnic_io_req *io_req;
+ unsigned long flags;
+ spinlock_t *io_lock;
+
+ fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+ fcpio_tag_id_dec(&tag, &id);
+
+ if ((id & FNIC_TAG_MASK) >= FNIC_MAX_IO_REQ)
+ return;
+ sc = scsi_host_find_tag(fnic->lport->host, id & FNIC_TAG_MASK);
+ WARN_ON_ONCE(!sc);
+ if (!sc)
+ return;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ WARN_ON_ONCE(!io_req);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ return;
+ }
+
+ if (id & FNIC_TAG_ABORT) {
+ /* Completion of abort cmd */
+
+ CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
+ CMD_ABTS_STATUS(sc) = hdr_status;
+
+ printk(KERN_DEBUG DFX "abort complete. id %d status %s\n",
+ fnic->fnic_no, (int)(id & FNIC_TAG_MASK),
+ fcpio_status_str[hdr_status]);
+ if (io_req->abts_done)
+ complete(io_req->abts_done);
+
+ } else if (id & FNIC_TAG_DEV_RST) {
+ /* Completion of device reset */
+ CMD_LR_STATUS(sc) = hdr_status;
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
+ printk(KERN_DEBUG DFX "dev reset complete. id %d status %s\n",
+ fnic->fnic_no, (int)(id & FNIC_TAG_MASK),
+ fcpio_status_str[hdr_status]);
+ if (io_req->dr_done)
+ complete(io_req->dr_done);
+
+ } else
+ printk(KERN_ERR DFX "Unexpected itmf io state %s tag %x\n",
+ fnic->fnic_no, fnic_ioreq_state_str[CMD_STATE(sc)], id);
+
+ spin_unlock_irqrestore(io_lock, flags);
+}
+
+/*
+ * fnic_fcpio_cmpl_handler
+ * Routine to service the cq for wq_copy
+ */
+static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev,
+ unsigned int cq_index,
+ struct fcpio_fw_req *desc)
+{
+ struct fnic *fnic = vnic_dev_priv(vdev);
+ int ret = 0;
+
+ switch (desc->hdr.type) {
+ case FCPIO_ACK: /* fw copied copy wq desc to its queue */
+ fnic_fcpio_ack_handler(fnic, cq_index, desc);
+ break;
+
+ case FCPIO_ICMND_CMPL: /* fw completed a command */
+ fnic_fcpio_icmnd_cmpl_handler(fnic, desc);
+ break;
+
+ case FCPIO_ITMF_CMPL: /* fw completed itmf (abort cmd, lun reset)*/
+ fnic_fcpio_itmf_cmpl_handler(fnic, desc);
+ break;
+
+ case FCPIO_FLOGI_REG_CMPL: /* fw completed flogi_reg */
+ ret = fnic_fcpio_flogi_reg_cmpl_handler(fnic, desc);
+ break;
+
+ case FCPIO_RESET_CMPL: /* fw completed reset */
+ ret = fnic_fcpio_fw_reset_cmpl_handler(fnic, desc);
+ break;
+
+ default:
+ printk(KERN_DEBUG DFX "firmware completion type %d\n",
+ fnic->fnic_no, desc->hdr.type);
+ BUG();
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * fnic_wq_copy_cmpl_handler
+ * Routine to process wq copy
+ */
+int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int copy_work_to_do)
+{
+ unsigned int wq_work_done = 0;
+ unsigned int i, cq_index;
+ unsigned int cur_work_done;
+
+ for (i = 0; i < fnic->wq_copy_count; i++) {
+ cq_index = i + fnic->raw_wq_count + fnic->rq_count;
+ cur_work_done = vnic_cq_copy_service(&fnic->cq[cq_index],
+ fnic_fcpio_cmpl_handler,
+ copy_work_to_do);
+ wq_work_done += cur_work_done;
+ }
+ return wq_work_done;
+}
+
+static void fnic_cleanup_io(struct fnic *fnic, int exclude_id)
+{
+ unsigned int i;
+ struct fnic_io_req *io_req;
+ unsigned long flags = 0;
+ struct scsi_cmnd *sc;
+ spinlock_t *io_lock;
+
+ for (i = 0; i < FNIC_MAX_IO_REQ; i++) {
+ if (i == exclude_id)
+ continue;
+ sc = scsi_host_find_tag(fnic->lport->host, i);
+ if (!sc)
+ continue;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto cleanup_scsi_cmd;
+ }
+
+ CMD_SP(sc) = NULL;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /* If there is a scsi_cmnd associated with this io_req, then
+ * free the corresponding state
+ */
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+
+cleanup_scsi_cmd:
+ sc->result = DID_NO_CONNECT << 16;
+ printk(KERN_DEBUG DFX "fnic_cleanup_io:"
+ " did_no_connect\n", fnic->fnic_no);
+
+ /* Complete the command to SCSI */
+ if (sc->scsi_done)
+ sc->scsi_done(sc);
+ }
+}
+
+void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
+ struct fcpio_host_req *desc)
+{
+ u32 id;
+ struct fnic *fnic = vnic_dev_priv(wq->vdev);
+ struct fnic_io_req *io_req;
+ struct scsi_cmnd *sc;
+ unsigned long flags;
+ spinlock_t *io_lock;
+
+ /* get the tag reference */
+ fcpio_tag_id_dec(&desc->hdr.tag, &id);
+ id &= FNIC_TAG_MASK;
+
+ if (id >= FNIC_MAX_IO_REQ)
+ return;
+ sc = scsi_host_find_tag(fnic->lport->host, id);
+ if (!sc)
+ return;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+
+ /* Get the IO context which this desc refers to */
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ /* fnic interrupts are turned off by now */
+
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto wq_copy_cleanup_scsi_cmd;
+ }
+
+ CMD_SP(sc) = NULL;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+
+wq_copy_cleanup_scsi_cmd:
+ sc->result = DID_NO_CONNECT << 16;
+ printk(KERN_DEBUG DFX "wq_copy_cleanup_handler:"
+ " did_no_connect\n", fnic->fnic_no);
+
+ if (sc->scsi_done)
+ sc->scsi_done(sc);
+}
+
+static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag,
+ u32 task_req, u8 *fc_lun,
+ struct fc_rport *rport)
+{
+ struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (!vnic_wq_copy_desc_avail(wq)) {
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+ return 1;
+ }
+ fnic_queue_wq_copy_desc_itmf(
+ wq,
+ tag | FNIC_TAG_ABORT, /* host request id */
+ 0, /* lun map id */
+ task_req, /* task mgmt type */
+ tag, /* id for aborted IO */
+ fc_lun, /* FCP lun addr */
+ rport->port_id, /* d_id */
+ fnic->config.ra_tov, /* RATOV in msecs */
+ fnic->config.ed_tov /* EDTOV in msecs */
+ );
+
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+ return 0;
+}
+
+static void fnic_block_error_handler(struct scsi_cmnd *sc)
+{
+ struct Scsi_Host *shost = sc->device->host;
+ struct fc_rport *rport = starget_to_rport(scsi_target(sc->device));
+ unsigned long flags;
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ while (rport->port_state == FC_PORTSTATE_BLOCKED) {
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ msleep(1000);
+ spin_lock_irqsave(shost->host_lock, flags);
+ }
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ return;
+}
+
+/*
+ * This function is exported to SCSI for sending abort cmnds.
+ * A SCSI IO is represented by a io_req in the driver.
+ * The ioreq is linked to the SCSI Cmd, thus a link with the ULP's IO.
+ *
+ */
+int fnic_abort_cmd(struct scsi_cmnd *sc)
+{
+ struct fc_lport *lp;
+ struct fnic *fnic;
+ struct fnic_io_req *io_req;
+ struct fc_rport *rport;
+ spinlock_t *io_lock;
+ unsigned long flags;
+ int ret = SUCCESS;
+ u32 task_req;
+ struct scsi_lun fc_lun;
+ DECLARE_COMPLETION_ONSTACK(tm_done);
+
+ /* Wait for rport to unblock */
+ fnic_block_error_handler(sc);
+
+ /* Get local-port, check ready and link up */
+ lp = shost_priv(sc->device->host);
+
+ fnic = lp->drv_priv;
+ printk(KERN_DEBUG DFX "fnic_abort_cmd called\n", fnic->fnic_no);
+
+ if (lp->state != LPORT_ST_READY || !(lp->link_status & FC_LINK_UP)) {
+ ret = FAILED;
+ goto fnic_abort_cmd_end;
+ }
+
+ /*
+ * Avoid a race between SCSI issuing the abort and the device
+ * completing the command.
+ *
+ * If the command is already completed by the fw cmpl code,
+ * we just return SUCCESS from here. This means that the abort
+ * succeeded. In the SCSI ML, since the timeout for command has
+ * happened, the completion wont actually complete the command
+ * and it will be considered as an aborted command
+ *
+ * The CMD_SP will not be cleared except while holding io_req_lock.
+ */
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto fnic_abort_cmd_end;
+ }
+
+ /* The command has to be in pending state */
+ BUG_ON(CMD_STATE(sc) != FNIC_IOREQ_CMD_PENDING);
+
+ /* Command is still pending, need to abort it
+ * If the firmware completes the command after this point,
+ * the completion wont be done till mid-layer, since abort
+ * has already started.
+ */
+ CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
+
+ io_req->abts_done = &tm_done;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /* Check readiness of the remote port. If the path to remote
+ * port is up, then send abts to the remote port to terminate
+ * the IO. Else, just locally terminate the IO in the firmware
+ */
+ rport = starget_to_rport(scsi_target(sc->device));
+ if (fc_remote_port_chkready(rport) == 0)
+ task_req = FCPIO_ITMF_ABT_TASK;
+ else
+ task_req = FCPIO_ITMF_ABT_TASK_TERM;
+
+ /* Now queue the abort command to firmware */
+ int_to_scsilun(sc->device->lun, &fc_lun);
+
+ if (fnic_queue_abort_io_req(fnic, sc->request->tag, task_req,
+ fc_lun.scsi_lun, rport)) {
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (io_req)
+ io_req->abts_done = NULL;
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = FAILED;
+ goto fnic_abort_cmd_end;
+ }
+
+ /* We queued an abort IO, wait for its completion.
+ * Once the firmware completes the abort command, it will
+ * wake up this thread.
+ */
+ wait_for_completion_timeout(&tm_done,
+ msecs_to_jiffies
+ (2 * fnic->config.ra_tov +
+ fnic->config.ed_tov));
+
+ /* Check the abort status */
+ spin_lock_irqsave(io_lock, flags);
+
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = FAILED;
+ goto fnic_abort_cmd_end;
+ }
+ io_req->abts_done = NULL;
+
+ /* fw did not complete abort, timed out */
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = FAILED;
+ goto fnic_abort_cmd_end;
+ }
+
+ /* firmware completed the abort, check the status,
+ * free the io_req irrespective of failure or success
+ */
+ if (CMD_ABTS_STATUS(sc) != FCPIO_SUCCESS)
+ ret = FAILED;
+
+ CMD_SP(sc) = NULL;
+ spin_unlock_irqrestore(io_lock, flags);
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+
+fnic_abort_cmd_end:
+ printk(KERN_DEBUG DFX "Returning from abort cmd %s\n",
+ fnic->fnic_no, (ret == SUCCESS) ? "SUCCESS" : "FAILED");
+ return ret;
+}
+
+static inline int fnic_queue_dr_io_req(struct fnic *fnic,
+ struct scsi_cmnd *sc)
+{
+ struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ struct fc_rport *rport;
+ struct scsi_lun fc_lun;
+ int ret = 0;
+ unsigned long intr_flags;
+
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (!vnic_wq_copy_desc_avail(wq)) {
+ ret = -EAGAIN;
+ goto lr_io_req_end;
+ }
+
+ /* fill in the lun info */
+ int_to_scsilun(sc->device->lun, &fc_lun);
+ rport = starget_to_rport(scsi_target(sc->device));
+
+ printk(KERN_DEBUG DFX "FCID 0x%x LunID %d\n", fnic->fnic_no,
+ rport->port_id, sc->device->lun);
+
+ fnic_queue_wq_copy_desc_itmf(
+ wq,
+ sc->request->tag | FNIC_TAG_DEV_RST, /* host request id */
+ 0, /* lun map id */
+ FCPIO_ITMF_LUN_RESET, /* logical unit reset task mgmt */
+ SCSI_NO_TAG, /* id not specified */
+ fc_lun.scsi_lun, /* FCP 8 byte lun addr */
+ rport->port_id, /* d_id */
+ fnic->config.ra_tov, /* RATOV in msecs */
+ fnic->config.ed_tov /* EDTOV in msecs */
+ );
+
+lr_io_req_end:
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
+
+ return ret;
+}
+
+/*
+ * Clean up any pending aborts on the lun
+ * For each outstanding IO on this lun, whose abort is not completed by fw,
+ * issue a local abort. Wait for abort to complete. Return 0 if all commands
+ * successfully aborted, 1 otherwise
+ */
+static int fnic_clean_pending_aborts(struct fnic *fnic,
+ struct scsi_cmnd *lr_sc)
+{
+ int tag;
+ struct fnic_io_req *io_req;
+ spinlock_t *io_lock;
+ unsigned long flags;
+ int ret = 0;
+ struct scsi_cmnd *sc;
+ struct fc_rport *rport;
+ struct scsi_lun fc_lun;
+ struct scsi_device *lun_dev = lr_sc->device;
+ DECLARE_COMPLETION_ONSTACK(tm_done);
+
+ for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
+ sc = scsi_host_find_tag(fnic->lport->host, tag);
+
+ /* ignore this lun reset cmd or cmds that do not belong to
+ * this lun
+ */
+ if (!sc || sc == lr_sc || sc->device != lun_dev)
+ continue;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ if (!io_req || sc->device != lun_dev) {
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+
+ /* Found IO that is still pending with firmware and
+ * belongs to the LUN that we are resetting
+ */
+ printk(KERN_DEBUG DFX "Found IO in %s on lun\n",
+ fnic->fnic_no, fnic_ioreq_state_str[CMD_STATE(sc)]);
+
+ io_req->abts_done = &tm_done;
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /* Now queue the abort command to firmware */
+ int_to_scsilun(sc->device->lun, &fc_lun);
+ rport = starget_to_rport(scsi_target(sc->device));
+
+ if (fnic_queue_abort_io_req(fnic, tag,
+ FCPIO_ITMF_ABT_TASK_TERM,
+ fc_lun.scsi_lun, rport)) {
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (io_req)
+ io_req->abts_done = NULL;
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = 1;
+ goto clean_pending_aborts_end;
+ }
+
+ wait_for_completion_timeout(&tm_done,
+ msecs_to_jiffies
+ (fnic->config.ed_tov));
+
+ /* Recheck cmd state to check if it is now aborted */
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = 1;
+ goto clean_pending_aborts_end;
+ }
+
+ io_req->abts_done = NULL;
+
+ /* if abort is still pending with fw, fail */
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = 1;
+ goto clean_pending_aborts_end;
+ }
+ CMD_SP(sc) = NULL;
+ spin_unlock_irqrestore(io_lock, flags);
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+ }
+
+clean_pending_aborts_end:
+ return ret;
+}
+
+/* SCSI Eh thread issues a Lun Reset when one or more commands on a LUN
+ * fail to get aborted. It calls driver's eh_device_reset with a SCSI command
+ * on the LUN.
+ */
+int fnic_device_reset(struct scsi_cmnd *sc)
+{
+ struct fc_lport *lp;
+ struct fnic *fnic;
+ struct fnic_io_req *io_req;
+ struct fc_rport *rport;
+ int status;
+ int ret = FAILED;
+ spinlock_t *io_lock;
+ unsigned long flags;
+ DECLARE_COMPLETION_ONSTACK(tm_done);
+
+ /* Wait for rport to unblock */
+ fnic_block_error_handler(sc);
+
+ /* Get local-port, check ready and link up */
+ lp = shost_priv(sc->device->host);
+
+ fnic = lp->drv_priv;
+ printk(KERN_DEBUG DFX "Device reset called\n", fnic->fnic_no);
+
+ if (lp->state != LPORT_ST_READY || !(lp->link_status & FC_LINK_UP))
+ goto fnic_device_reset_end;
+
+ /* Check if remote port up */
+ rport = starget_to_rport(scsi_target(sc->device));
+ if (fc_remote_port_chkready(rport))
+ goto fnic_device_reset_end;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ /*
+ * If there is a io_req attached to this command, then use it,
+ * else allocate a new one.
+ */
+ if (!io_req) {
+ io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto fnic_device_reset_end;
+ }
+ memset(io_req, 0, sizeof(*io_req));
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING;
+ CMD_SP(sc) = (char *)io_req;
+ }
+ io_req->dr_done = &tm_done;
+ CMD_LR_STATUS(sc) = FCPIO_INVALID_CODE;
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /* issue the device reset
+ * if enqueue failed, let io_req remain allocated and attached
+ * to SCSI cmd, it will get freed during higher levels of EH
+ */
+ if (fnic_queue_dr_io_req(fnic, sc)) {
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (io_req)
+ io_req->dr_done = NULL;
+ spin_unlock_irqrestore(io_lock, flags);
+ goto fnic_device_reset_end;
+ }
+
+ /*
+ * Wait on the local completion for LUN reset. The io_req may be
+ * freed while we wait since we hold no lock.
+ */
+ wait_for_completion_timeout(&tm_done,
+ msecs_to_jiffies(FNIC_LUN_RESET_TIMEOUT));
+
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto fnic_device_reset_end;
+ }
+ io_req->dr_done = NULL;
+
+ status = CMD_LR_STATUS(sc);
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /* If lun reset not completed, bail out with failed. io_req
+ * gets cleaned up during higher levels of EH
+ */
+ if (status == FCPIO_INVALID_CODE) {
+ printk(KERN_DEBUG DFX "Device reset timed out\n",
+ fnic->fnic_no);
+ goto fnic_device_reset_end;
+ }
+
+ /* Completed, but not successful */
+ if (status != FCPIO_SUCCESS) {
+ printk(KERN_DEBUG DFX "Device reset completed - failed\n",
+ fnic->fnic_no);
+ goto fnic_device_reset_end;
+ }
+
+ /* Clean up any aborts on this lun that have still not
+ * completed. If any of these fail, then LUN reset fails.
+ * clean_pending_aborts cleans all cmds on this lun except
+ * the lun reset cmd. If all cmds get cleaned, then clean
+ * lun reset, otherswise fail lun reset, and higher levels
+ * of EH will kick in
+ */
+ if (fnic_clean_pending_aborts(fnic, sc)) {
+ printk(KERN_DEBUG DFX "Device reset failed"
+ " since could not abort all IOs\n",
+ fnic->fnic_no);
+ goto fnic_device_reset_end;
+ }
+
+ /* Clean lun reset command */
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ CMD_SP(sc) = NULL;
+ spin_unlock_irqrestore(io_lock, flags);
+
+ if (!io_req)
+ goto fnic_device_reset_end;
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+
+ /* Completed, and successful */
+ ret = SUCCESS;
+
+fnic_device_reset_end:
+ printk(KERN_DEBUG DFX "Returning from device reset %s\n",
+ fnic->fnic_no, (ret == SUCCESS) ? "SUCCESS" : "FAILED");
+ return ret;
+}
+
+/* Clean up all IOs, clean up libFC local port */
+int fnic_reset(struct Scsi_Host *shost)
+{
+ struct fc_lport *lp;
+ struct fnic *fnic;
+ unsigned long flags;
+ int ret = SUCCESS;
+ enum fnic_state old_state;
+ DECLARE_COMPLETION_ONSTACK(reset_wait);
+
+ lp = shost_priv(shost);
+ fnic = lp->drv_priv;
+
+ printk(KERN_DEBUG DFX "fnic_reset called\n", fnic->fnic_no);
+
+ /* Issue firmware reset */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ fnic->reset_wait = &reset_wait;
+ old_state = fnic->state;
+ fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
+ vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (fnic_fw_reset_handler(fnic)) {
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ ret = FAILED;
+ if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)
+ fnic->state = old_state;
+ fnic->reset_wait = NULL;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ goto fnic_reset_end;
+ }
+
+ /* fw reset is issued, now wait for it to complete */
+ wait_for_completion_timeout(&reset_wait,
+ msecs_to_jiffies(FNIC_HOST_RESET_TIMEOUT));
+
+ /* Check for status */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ fnic->reset_wait = NULL;
+ ret = (fnic->state == FNIC_IN_ETH_MODE) ? SUCCESS : FAILED;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ /* Now reset local port, this will clean up libFC exchanges,
+ * reset remote port sessions, and if link is up, begin flogi
+ */
+ fc_lport_lock(lp);
+ if (lp->tt.lport_reset(lp))
+ ret = FAILED;
+ fc_lport_unlock(lp);
+
+fnic_reset_end:
+ printk(KERN_DEBUG DFX "Returning from fnic reset %s\n",
+ fnic->fnic_no, (ret == SUCCESS) ? "SUCCESS" : "FAILED");
+
+ return ret;
+}
+
+/* SCSI Error handling calls driver's eh_host_reset if all prior
+ * error handling levels return FAILED. If host reset completes
+ * successfully, and if link is up, then Fabric login begins.
+ *
+ * Host Reset is the highest level of error recovery. If this fails, then
+ * host is offlined by SCSI.
+ *
+ */
+int fnic_host_reset(struct scsi_cmnd *sc)
+{
+ return fnic_reset(sc->device->host);
+}
+
+/*
+ * This fxn is called from libFC when host is removed
+ */
+void fnic_scsi_abort_io(struct fc_lport *lp)
+{
+ int err = 0;
+ unsigned long flags;
+ enum fnic_state old_state;
+ struct fnic *fnic = lp->drv_priv;
+ DECLARE_COMPLETION_ONSTACK(remove_wait);
+
+ /* Issue firmware reset for fnic, wait for reset to complete */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ fnic->remove_wait = &remove_wait;
+ old_state = fnic->state;
+ fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
+ vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ err = fnic_fw_reset_handler(fnic);
+ if (err) {
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)
+ fnic->state = old_state;
+ fnic->remove_wait = NULL;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ goto abort_io_end;
+ }
+
+ /* Wait for firmware reset to complete */
+ wait_for_completion_timeout(&remove_wait,
+ msecs_to_jiffies(FNIC_RMDEVICE_TIMEOUT));
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ fnic->remove_wait = NULL;
+ printk(KERN_DEBUG DFX "fnic_scsi_abort_io %s\n", fnic->fnic_no,
+ (fnic->state == FNIC_IN_ETH_MODE) ? "SUCCESS" : "FAILED");
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+abort_io_end:
+ return;
+}
+
+/*
+ * This fxn called from libFC to clean up driver IO state on link down
+ */
+void fnic_scsi_cleanup(struct fc_lport *lp)
+{
+ unsigned long flags;
+ enum fnic_state old_state;
+ struct fnic *fnic = lp->drv_priv;
+
+ /* issue fw reset */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ old_state = fnic->state;
+ fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
+ vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (fnic_fw_reset_handler(fnic)) {
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)
+ fnic->state = old_state;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ }
+
+}
next prev parent reply other threads:[~2008-08-23 2:52 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-23 2:51 [RFC][PATCH 0/6] fnic: initial submission of driver for FCoE HBA jeykholt
2008-08-23 2:52 ` [RFC][PATCH 1/6] fnic: add main file with module infrastructure, etc jeykholt
2008-08-23 2:52 ` jeykholt [this message]
2008-08-25 18:22 ` [RFC][PATCH 2/6] fnic: add fnic_scsi.c and fnic_io.h Mike Christie
2008-08-25 19:15 ` James Smart
2008-08-25 19:31 ` Mike Christie
2008-08-25 19:39 ` James Smart
2008-08-25 21:01 ` Joe Eykholt
2008-08-25 21:51 ` Mike Christie
2008-08-25 21:55 ` Mike Christie
2008-08-28 1:31 ` Abhijeet Joglekar
2008-08-25 18:41 ` Mike Christie
2008-08-25 19:17 ` James Smart
2008-08-25 19:38 ` Mike Christie
2008-08-23 2:52 ` [RFC][PATCH 3/6] fnic: Add fnic_fcs.c and fnic_attr.c jeykholt
2008-08-23 2:52 ` [RFC][PATCH 4/6] fnic: add resource, interrupt, and firmware interfaces jeykholt
2008-08-23 2:52 ` [RFC][PATCH 5/6] fnic: add queue interfaces jeykholt
2008-08-23 2:53 ` [RFC][PATCH 6/6] fnic: add Makefile, patch Kconfig, MAINTAINERS, pci_ids.h jeykholt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080823025222.13569.37765.stgit@feynman.nuovasystems.com \
--to=jeykholt@cisco.com \
--cc=ajoglekar@nuovasystems.com \
--cc=jre@nuovasystems.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox