[PATCH v2 14/41] hpsa: use ioaccel2 path to submit IOs to physical drives in HBA mode.

[Don Brace <don.brace@pmcs.com>]

From: Joe Handzik <joseph.t.handzik@hp.com>

use ioaccel2 path to submit I/O to physical drives in HBA mode

Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
 drivers/scsi/hpsa.c |   10 +++++++++-
 drivers/scsi/hpsa.h |    1 +
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index a218b0e..85c4c8a 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1123,6 +1123,11 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno,
 		h->dev[entry]->raid_map = new_entry->raid_map;
 		h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
 	}
+	if (new_entry->hba_ioaccel_enabled) {
+		h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
+		wmb(); /* set ioaccel_handle *before* hba_ioaccel_enabled */
+	}
+	h->dev[entry]->hba_ioaccel_enabled = new_entry->hba_ioaccel_enabled;
 	h->dev[entry]->offload_config = new_entry->offload_config;
 	h->dev[entry]->offload_to_mirror = new_entry->offload_to_mirror;
 	h->dev[entry]->queue_depth = new_entry->queue_depth;
@@ -3042,6 +3047,7 @@ static int hpsa_update_device_info(struct ctlr_info *h,
 		this_device->offload_config = 0;
 		this_device->offload_enabled = 0;
 		this_device->offload_to_be_enabled = 0;
+		this_device->hba_ioaccel_enabled = 0;
 		this_device->volume_offline = 0;
 		this_device->queue_depth = h->nr_cmds;
 	}
@@ -3330,6 +3336,8 @@ static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h,
 		(struct ext_report_lun_entry *) lunaddrbytes;
 
 	dev->ioaccel_handle = rle->ioaccel_handle;
+	if (PHYS_IOACCEL(lunaddrbytes) && dev->ioaccel_handle)
+		dev->hba_ioaccel_enabled = 1;
 	memset(id_phys, 0, sizeof(*id_phys));
 	rc = hpsa_bmic_id_physical_device(h, lunaddrbytes,
 			GET_BMIC_DRIVE_NUMBER(lunaddrbytes), id_phys,
@@ -4431,7 +4439,7 @@ static int hpsa_ioaccel_submit(struct ctlr_info *h,
 		rc = hpsa_scsi_ioaccel_raid_map(h, c);
 		if (rc < 0)     /* scsi_dma_map failed. */
 			rc = SCSI_MLQUEUE_HOST_BUSY;
-	} else if (dev->ioaccel_handle) {
+	} else if (dev->hba_ioaccel_enabled) {
 		hpsa_cmd_init(h, c->cmdindex, c);
 		c->cmd_type = CMD_SCSI;
 		c->scsi_cmd = cmd;
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index df2468c..87a70b5 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -55,6 +55,7 @@ struct hpsa_scsi_dev_t {
 	int offload_config;		/* I/O accel RAID offload configured */
 	int offload_enabled;		/* I/O accel RAID offload enabled */
 	int offload_to_be_enabled;
+	int hba_ioaccel_enabled;
 	int offload_to_mirror;		/* Send next I/O accelerator RAID
 					 * offload request to mirror drive
 					 */