public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Don Brace <don.brace@pmcs.com>
To: scott.teel@pmcs.com, Kevin.Barnett@pmcs.com,
	james.bottomley@parallels.com, hch@infradead.org,
	Justin.Lindley@pmcs.com, brace@pmcs.com
Cc: linux-scsi@vger.kernel.org
Subject: [PATCH v2 18/41] hpsa: refactor freeing of resources into more logical functions
Date: Fri, 06 Mar 2015 17:47:23 -0600	[thread overview]
Message-ID: <20150306234722.29973.16998.stgit@brunhilda> (raw)
In-Reply-To: <20150306233504.29973.41322.stgit@brunhilda>

From: Robert Elliott <elliott@hp.com>

refactor freeing of resources into more logical functions

Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
 drivers/scsi/hpsa.c |  104 +++++++++++++++++++++++++++------------------------
 1 file changed, 56 insertions(+), 48 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index d40fc65..6d3402a 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -235,6 +235,8 @@ static void check_ioctl_unit_attention(struct ctlr_info *h,
 static void calc_bucket_map(int *bucket, int num_buckets,
 	int nsgs, int min_blocks, u32 *bucket_map);
 static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h);
+static void hpsa_free_ioaccel1_cmd_and_bft(struct ctlr_info *h);
+static void hpsa_free_ioaccel2_cmd_and_bft(struct ctlr_info *h);
 static inline u32 next_command(struct ctlr_info *h, u8 q);
 static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
 			       u32 *cfg_base_addr, u64 *cfg_base_addr_index,
@@ -6929,6 +6931,21 @@ out_disable:
 	return rc;
 }
 
+static void hpsa_free_cmd_pool(struct ctlr_info *h)
+{
+	kfree(h->cmd_pool_bits);
+	if (h->cmd_pool)
+		pci_free_consistent(h->pdev,
+				h->nr_cmds * sizeof(struct CommandList),
+				h->cmd_pool,
+				h->cmd_pool_dhandle);
+	if (h->errinfo_pool)
+		pci_free_consistent(h->pdev,
+				h->nr_cmds * sizeof(struct ErrorInfo),
+				h->errinfo_pool,
+				h->errinfo_pool_dhandle);
+}
+
 static int hpsa_alloc_cmd_pool(struct ctlr_info *h)
 {
 	h->cmd_pool_bits = kzalloc(
@@ -6953,28 +6970,6 @@ clean_up:
 	return -ENOMEM;
 }
 
-static void hpsa_free_cmd_pool(struct ctlr_info *h)
-{
-	kfree(h->cmd_pool_bits);
-	if (h->cmd_pool)
-		pci_free_consistent(h->pdev,
-			    h->nr_cmds * sizeof(struct CommandList),
-			    h->cmd_pool, h->cmd_pool_dhandle);
-	if (h->ioaccel2_cmd_pool)
-		pci_free_consistent(h->pdev,
-			h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
-			h->ioaccel2_cmd_pool, h->ioaccel2_cmd_pool_dhandle);
-	if (h->errinfo_pool)
-		pci_free_consistent(h->pdev,
-			    h->nr_cmds * sizeof(struct ErrorInfo),
-			    h->errinfo_pool,
-			    h->errinfo_pool_dhandle);
-	if (h->ioaccel_cmd_pool)
-		pci_free_consistent(h->pdev,
-			h->nr_cmds * sizeof(struct io_accel1_cmd),
-			h->ioaccel_cmd_pool, h->ioaccel_cmd_pool_dhandle);
-}
-
 static void hpsa_irq_affinity_hints(struct ctlr_info *h)
 {
 	int i, cpu;
@@ -7095,8 +7090,10 @@ static void hpsa_free_reply_queues(struct ctlr_info *h)
 	for (i = 0; i < h->nreply_queues; i++) {
 		if (!h->reply_queue[i].head)
 			continue;
-		pci_free_consistent(h->pdev, h->reply_queue_size,
-			h->reply_queue[i].head, h->reply_queue[i].busaddr);
+		pci_free_consistent(h->pdev,
+					h->reply_queue_size,
+					h->reply_queue[i].head,
+					h->reply_queue[i].busaddr);
 		h->reply_queue[i].head = NULL;
 		h->reply_queue[i].busaddr = 0;
 	}
@@ -7107,9 +7104,10 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
 	hpsa_free_irqs(h);
 	hpsa_free_sg_chain_blocks(h);
 	hpsa_free_cmd_pool(h);
-	kfree(h->ioaccel1_blockFetchTable);
-	kfree(h->blockFetchTable);
-	hpsa_free_reply_queues(h);
+	kfree(h->blockFetchTable);		/* perf 2 */
+	hpsa_free_reply_queues(h);		/* perf 1 */
+	hpsa_free_ioaccel1_cmd_and_bft(h);	/* perf 1 */
+	hpsa_free_ioaccel2_cmd_and_bft(h);	/* perf 1 */
 	hpsa_free_cfgtables(h);			/* pci_init 4 */
 	iounmap(h->vaddr);			/* pci_init 3 */
 	hpsa_disable_interrupt_mode(h);		/* pci_init 2 */
@@ -7540,6 +7538,8 @@ reinit_after_soft_reset:
 clean4:
 	hpsa_free_sg_chain_blocks(h);
 	hpsa_free_cmd_pool(h);
+	hpsa_free_ioaccel1_cmd_and_bft(h);
+	hpsa_free_ioaccel2_cmd_and_bft(h);
 clean2_and_free_irqs:
 	hpsa_free_irqs(h);
 clean2:
@@ -7641,17 +7641,11 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 
 	hpsa_free_device_info(h);
 	hpsa_free_sg_chain_blocks(h);
-	pci_free_consistent(h->pdev,
-		h->nr_cmds * sizeof(struct CommandList),
-		h->cmd_pool, h->cmd_pool_dhandle);
-	pci_free_consistent(h->pdev,
-		h->nr_cmds * sizeof(struct ErrorInfo),
-		h->errinfo_pool, h->errinfo_pool_dhandle);
-	hpsa_free_reply_queues(h);
-	kfree(h->cmd_pool_bits);
-	kfree(h->blockFetchTable);
-	kfree(h->ioaccel1_blockFetchTable);
-	kfree(h->ioaccel2_blockFetchTable);
+	kfree(h->blockFetchTable);		/* perf 2 */
+	hpsa_free_reply_queues(h);		/* perf 1 */
+	hpsa_free_ioaccel1_cmd_and_bft(h);	/* perf 1 */
+	hpsa_free_ioaccel2_cmd_and_bft(h);	/* perf 1 */
+	hpsa_free_cmd_pool(h);			/* init_one 5 */
 	kfree(h->hba_inquiry_data);
 
 	/* includes hpsa_disable_interrupt_mode - pci_init 2 */
@@ -7898,6 +7892,17 @@ static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
 	return 0;
 }
 
+/* Free ioaccel1 mode command blocks and block fetch table */
+static void hpsa_free_ioaccel1_cmd_and_bft(struct ctlr_info *h)
+{
+	if (h->ioaccel_cmd_pool)
+		pci_free_consistent(h->pdev,
+			h->nr_cmds * sizeof(*h->ioaccel_cmd_pool),
+			h->ioaccel_cmd_pool,
+			h->ioaccel_cmd_pool_dhandle);
+	kfree(h->ioaccel1_blockFetchTable);
+}
+
 /* Allocate ioaccel1 mode command blocks and block fetch table */
 static int hpsa_alloc_ioaccel1_cmd_and_bft(struct ctlr_info *h)
 {
@@ -7930,14 +7935,21 @@ static int hpsa_alloc_ioaccel1_cmd_and_bft(struct ctlr_info *h)
 	return 0;
 
 clean_up:
-	if (h->ioaccel_cmd_pool)
-		pci_free_consistent(h->pdev,
-			h->nr_cmds * sizeof(*h->ioaccel_cmd_pool),
-			h->ioaccel_cmd_pool, h->ioaccel_cmd_pool_dhandle);
-	kfree(h->ioaccel1_blockFetchTable);
+	hpsa_free_ioaccel1_cmd_and_bft(h);
 	return 1;
 }
 
+/* Free ioaccel2 mode command blocks and block fetch table */
+static void hpsa_free_ioaccel2_cmd_and_bft(struct ctlr_info *h)
+{
+	if (h->ioaccel2_cmd_pool)
+		pci_free_consistent(h->pdev,
+			h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
+			h->ioaccel2_cmd_pool,
+			h->ioaccel2_cmd_pool_dhandle);
+	kfree(h->ioaccel2_blockFetchTable);
+}
+
 /* Allocate ioaccel2 mode command blocks and block fetch table */
 static int hpsa_alloc_ioaccel2_cmd_and_bft(struct ctlr_info *h)
 {
@@ -7968,11 +7980,7 @@ static int hpsa_alloc_ioaccel2_cmd_and_bft(struct ctlr_info *h)
 	return 0;
 
 clean_up:
-	if (h->ioaccel2_cmd_pool)
-		pci_free_consistent(h->pdev,
-			h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
-			h->ioaccel2_cmd_pool, h->ioaccel2_cmd_pool_dhandle);
-	kfree(h->ioaccel2_blockFetchTable);
+	hpsa_free_ioaccel2_cmd_and_bft(h);
 	return 1;
 }
 


  parent reply	other threads:[~2015-03-06 23:48 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-06 23:45 [PATCH v2 00/41] hpsa updates Don Brace
2015-03-06 23:45 ` [PATCH v2 01/41] hpsa: add masked physical devices into h->dev[] array Don Brace
2015-03-08 15:37   ` Christoph Hellwig
2015-03-06 23:45 ` [PATCH v2 02/41] hpsa: clean up host, channel, target, lun prints Don Brace
2015-03-08 15:38   ` Christoph Hellwig
2015-03-06 23:46 ` [PATCH v2 03/41] hpsa: rework controller command submission Don Brace
2015-03-06 23:46 ` [PATCH v2 04/41] hpsa: clean up aborts Don Brace
2015-03-06 23:46 ` [PATCH v2 05/41] hpsa: decrement h->commands_outstanding in fail_all_outstanding_cmds Don Brace
2015-03-06 23:46 ` [PATCH v2 06/41] hpsa: hpsa decode sense data for io and tmf Don Brace
2015-03-08 15:40   ` Christoph Hellwig
2015-03-06 23:46 ` [PATCH v2 07/41] hpsa: allow lockup detected to be viewed via sysfs Don Brace
2015-03-06 23:46 ` [PATCH v2 08/41] hpsa: make function names consistent Don Brace
2015-03-06 23:46 ` [PATCH v2 09/41] hpsa: factor out hpsa_init_cmd function Don Brace
2015-03-06 23:46 ` [PATCH v2 10/41] hpsa: do not ignore return value of hpsa_register_scsi Don Brace
2015-03-06 23:46 ` [PATCH v2 11/41] hpsa: try resubmitting down raid path on task set full Don Brace
2015-03-06 23:46 ` [PATCH v2 12/41] hpsa: factor out hpsa_ioaccel_submit function Don Brace
2015-03-06 23:46 ` [PATCH v2 13/41] hpsa: print accurate SSD Smart Path Enabled status Don Brace
2015-03-06 23:47 ` [PATCH v2 14/41] hpsa: use ioaccel2 path to submit IOs to physical drives in HBA mode Don Brace
2015-03-06 23:47 ` [PATCH v2 15/41] hpsa: Get queue depth from identify physical bmic for physical disks Don Brace
2015-03-06 23:47 ` [PATCH v2 16/41] hpsa: break hpsa_free_irqs_and_disable_msix into two functions Don Brace
2015-03-08 15:42   ` Christoph Hellwig
2015-03-06 23:47 ` [PATCH v2 17/41] hpsa: clean up error handling Don Brace
2015-03-06 23:47 ` Don Brace [this message]
2015-03-06 23:47 ` [PATCH v2 19/41] hpsa: add ioaccel sg chaining for the ioaccel2 path Don Brace
2015-03-06 23:47 ` [PATCH v2 20/41] hpsa: add more ioaccel2 error handling, including underrun statuses Don Brace
2015-03-06 23:47 ` [PATCH v2 21/41] hpsa: do not check cmd_alloc return value - it cannnot return NULL Don Brace
2015-03-06 23:47 ` [PATCH v2 22/41] hpsa: correct return values from driver functions Don Brace
2015-03-06 23:47 ` [PATCH v2 23/41] hpsa: clean up driver init Don Brace
2015-03-06 23:47 ` [PATCH v2 24/41] hpsa: clean up some error reporting output in abort handler Don Brace
2015-03-06 23:47 ` [PATCH v2 25/41] hpsa: do not print ioaccel2 warning messages about unusual completions Don Brace
2015-03-06 23:48 ` [PATCH v2 26/41] hpsa: add support sending aborts to physical devices via the ioaccel2 path Don Brace
2015-03-06 23:48 ` [PATCH v2 27/41] hpsa: use helper routines for finishing commands Don Brace
2015-03-06 23:48 ` [PATCH v2 28/41] hpsa: don't return abort request until target is complete Don Brace
2015-03-06 23:48 ` [PATCH v2 29/41] hpsa: refactor and rework support for sending TEST_UNIT_READY Don Brace
2015-03-06 23:48 ` [PATCH v2 30/41] hpsa: performance tweak for hpsa_scatter_gather() Don Brace
2015-03-06 23:48 ` [PATCH v2 31/41] hpsa: call pci_release_regions after pci_disable_device Don Brace
2015-03-06 23:48 ` [PATCH v2 32/41] hpsa: skip free_irq calls if irqs are not allocated Don Brace
2015-03-06 23:48 ` [PATCH v2 33/41] hpsa: cleanup for init_one step 2 in kdump Don Brace
2015-03-06 23:48 ` [PATCH v2 34/41] hpsa: fix try_soft_reset error handling Don Brace
2015-03-06 23:48 ` [PATCH v2 35/41] hpsa: create workqueue after the driver is ready for use Don Brace
2015-03-06 23:48 ` [PATCH v2 36/41] hpsa: add interrupt number to /proc/interrupts interrupt name Don Brace
2015-03-06 23:49 ` [PATCH v2 37/41] hpsa: use block layer tag for command allocation Don Brace
2015-03-06 23:49 ` [PATCH v2 38/41] hpsa: use scsi host_no as hpsa controller number Don Brace
2015-03-06 23:49 ` [PATCH v2 39/41] hpsa: propagate the error code in hpsa_kdump_soft_reset Don Brace
2015-03-06 23:49 ` [PATCH v2 40/41] hpsa: cleanup reset Don Brace
2015-03-06 23:49 ` [PATCH v2 41/41] hpsa: change driver version Don Brace

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150306234722.29973.16998.stgit@brunhilda \
    --to=don.brace@pmcs.com \
    --cc=Justin.Lindley@pmcs.com \
    --cc=Kevin.Barnett@pmcs.com \
    --cc=brace@pmcs.com \
    --cc=hch@infradead.org \
    --cc=james.bottomley@parallels.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=scott.teel@pmcs.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox