* [PATCH v1 1/2] scsi: ufs: Fix up clock scaling
2019-10-29 12:23 [PATCH v1 0/2] UFS driver general fixes bundle 2 Can Guo
@ 2019-10-29 12:23 ` Can Guo
2019-10-31 7:04 ` kbuild test robot
2019-10-31 7:04 ` [RFC PATCH] scsi: ufs: ufshcd_scale_clks() can be static kbuild test robot
2019-10-29 12:23 ` [PATCH v1 2/2] scsi: ufs: Do not rely on prefetched data Can Guo
1 sibling, 2 replies; 6+ messages in thread
From: Can Guo @ 2019-10-29 12:23 UTC (permalink / raw)
To: asutoshd, nguyenb, rnayak, linux-scsi, kernel-team, saravanak,
salyzyn, cang
Cc: Subhash Jadavani, Alim Akhtar, Avri Altman, Pedro Sousa,
James E.J. Bottomley, Martin K. Petersen, Stanley Chu, Bean Huo,
Tomas Winkler, open list
From: Subhash Jadavani <subhashj@codeaurora.org>
In host reset and restore path, after hba is stopped but before it is
enabled back again, we scale up clocks to their max frequencies.
If clock scale notify vendor specific ops happens to have any operations
to hba, DME commands for example, it would fail due to hba is stopped at
this moment. This change introduces another func to explicitly set clock
frequency so that it can be used here and also in ufshcd_scale_clks().
Meanwhile, this change modifies the clock scaling preparation error out
path so that clock is released before it returns.
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 74 +++++++++++++++++++++++++++++++----------------
1 file changed, 49 insertions(+), 25 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index c28c144..3a0b99b 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -903,28 +903,29 @@ static bool ufshcd_is_unipro_pa_params_tuning_req(struct ufs_hba *hba)
return false;
}
-static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
+/**
+ * ufshcd_set_clk_freq - set UFS controller clock frequencies
+ * @hba: per adapter instance
+ * @scale_up: If True, set max possible frequency othewise set low frequency
+ *
+ * Returns 0 if successful
+ * Returns < 0 for any other errors
+ */
+static int ufshcd_set_clk_freq(struct ufs_hba *hba, bool scale_up)
{
int ret = 0;
struct ufs_clk_info *clki;
struct list_head *head = &hba->clk_list_head;
- ktime_t start = ktime_get();
- bool clk_state_changed = false;
if (list_empty(head))
goto out;
- ret = ufshcd_vops_clk_scale_notify(hba, scale_up, PRE_CHANGE);
- if (ret)
- return ret;
-
list_for_each_entry(clki, head, list) {
if (!IS_ERR_OR_NULL(clki->clk)) {
if (scale_up && clki->max_freq) {
if (clki->curr_freq == clki->max_freq)
continue;
- clk_state_changed = true;
ret = clk_set_rate(clki->clk, clki->max_freq);
if (ret) {
dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n",
@@ -943,7 +944,6 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
if (clki->curr_freq == clki->min_freq)
continue;
- clk_state_changed = true;
ret = clk_set_rate(clki->clk, clki->min_freq);
if (ret) {
dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n",
@@ -962,13 +962,36 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
clki->name, clk_get_rate(clki->clk));
}
+out:
+ return ret;
+}
+
+/**
+ * ufshcd_scale_clks - scale up or scale down UFS controller clocks
+ * @hba: per adapter instance
+ * @scale_up: True if scaling up and false if scaling down
+ *
+ * Returns 0 if successful
+ * Returns < 0 for any other errors
+ */
+int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
+{
+ int ret = 0;
+
+ ret = ufshcd_vops_clk_scale_notify(hba, scale_up, PRE_CHANGE);
+ if (ret)
+ return ret;
+
+ ret = ufshcd_set_clk_freq(hba, scale_up);
+ if (ret)
+ return ret;
+
ret = ufshcd_vops_clk_scale_notify(hba, scale_up, POST_CHANGE);
+ if (ret) {
+ ufshcd_set_clk_freq(hba, !scale_up);
+ return ret;
+ }
-out:
- if (clk_state_changed)
- trace_ufshcd_profile_clk_scaling(dev_name(hba->dev),
- (scale_up ? "up" : "down"),
- ktime_to_us(ktime_sub(ktime_get(), start)), ret);
return ret;
}
@@ -1154,35 +1177,36 @@ static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up)
ret = ufshcd_clock_scaling_prepare(hba);
if (ret)
- return ret;
+ goto out;
/* scale down the gear before scaling down clocks */
if (!scale_up) {
ret = ufshcd_scale_gear(hba, false);
if (ret)
- goto out;
+ goto clk_scaling_unprepare;
}
ret = ufshcd_scale_clks(hba, scale_up);
- if (ret) {
- if (!scale_up)
- ufshcd_scale_gear(hba, true);
- goto out;
- }
+ if (ret)
+ goto scale_up_gear;
/* scale up the gear after scaling up clocks */
if (scale_up) {
ret = ufshcd_scale_gear(hba, true);
if (ret) {
ufshcd_scale_clks(hba, false);
- goto out;
+ goto clk_scaling_unprepare;
}
}
- ret = ufshcd_vops_clk_scale_notify(hba, scale_up, POST_CHANGE);
+ goto clk_scaling_unprepare;
-out:
+scale_up_gear:
+ if (!scale_up)
+ ufshcd_scale_gear(hba, true);
+clk_scaling_unprepare:
ufshcd_clock_scaling_unprepare(hba);
+out:
ufshcd_release(hba);
return ret;
}
@@ -6207,7 +6231,7 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba)
spin_unlock_irqrestore(hba->host->host_lock, flags);
/* scale up clocks to max frequency before full reinitialization */
- ufshcd_scale_clks(hba, true);
+ ufshcd_set_clk_freq(hba, true);
err = ufshcd_hba_enable(hba);
if (err)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v1 2/2] scsi: ufs: Do not rely on prefetched data
2019-10-29 12:23 [PATCH v1 0/2] UFS driver general fixes bundle 2 Can Guo
2019-10-29 12:23 ` [PATCH v1 1/2] scsi: ufs: Fix up clock scaling Can Guo
@ 2019-10-29 12:23 ` Can Guo
2019-10-29 16:26 ` asutoshd
1 sibling, 1 reply; 6+ messages in thread
From: Can Guo @ 2019-10-29 12:23 UTC (permalink / raw)
To: asutoshd, nguyenb, rnayak, linux-scsi, kernel-team, saravanak,
salyzyn, cang
Cc: Alim Akhtar, Avri Altman, Pedro Sousa, James E.J. Bottomley,
Martin K. Petersen, Stanley Chu, Bean Huo, Tomas Winkler,
Subhash Jadavani, Bjorn Andersson, Arnd Bergmann, open list
We were setting bActiveICCLevel attribute for UFS device only once but
type of this attribute has changed from persistent to volatile since UFS
device specification v2.1. This attribute is set to the default value after
power cycle or hardware reset event. It isn't safe to rely on prefetched
data (only used for bActiveICCLevel attribute now). Hence this change
removes the code related to data prefetching and set this parameter on
every attempt to probe the UFS device.
Signed-off-by: Can Guo <cang@codeaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 30 +++++++++++++++---------------
drivers/scsi/ufs/ufshcd.h | 13 -------------
2 files changed, 15 insertions(+), 28 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 3a0b99b..0026199 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6424,11 +6424,12 @@ static u32 ufshcd_find_max_sup_active_icc_level(struct ufs_hba *hba,
return icc_level;
}
-static void ufshcd_init_icc_levels(struct ufs_hba *hba)
+static void ufshcd_set_active_icc_lvl(struct ufs_hba *hba)
{
int ret;
int buff_len = hba->desc_size.pwr_desc;
u8 *desc_buf;
+ u32 icc_level;
desc_buf = kmalloc(buff_len, GFP_KERNEL);
if (!desc_buf)
@@ -6442,20 +6443,17 @@ static void ufshcd_init_icc_levels(struct ufs_hba *hba)
goto out;
}
- hba->init_prefetch_data.icc_level =
- ufshcd_find_max_sup_active_icc_level(hba,
- desc_buf, buff_len);
- dev_dbg(hba->dev, "%s: setting icc_level 0x%x",
- __func__, hba->init_prefetch_data.icc_level);
+ icc_level = ufshcd_find_max_sup_active_icc_level(hba, desc_buf,
+ buff_len);
+ dev_dbg(hba->dev, "%s: setting icc_level 0x%x", __func__, icc_level);
ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
- QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0,
- &hba->init_prefetch_data.icc_level);
+ QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0, &icc_level);
if (ret)
dev_err(hba->dev,
"%s: Failed configuring bActiveICCLevel = %d ret = %d",
- __func__, hba->init_prefetch_data.icc_level , ret);
+ __func__, icc_level, ret);
out:
kfree(desc_buf);
@@ -6963,6 +6961,14 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
}
}
+ /*
+ * bActiveICCLevel is volatile for UFS device (as per latest v2.1 spec)
+ * and for removable UFS card as well, hence always set the parameter.
+ * Note: Error handler may issue the device reset hence resetting
+ * bActiveICCLevel as well so it is always safe to set this here.
+ */
+ ufshcd_set_active_icc_lvl(hba);
+
/* set the state as operational after switching to desired gear */
hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
@@ -6979,9 +6985,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
QUERY_FLAG_IDN_PWR_ON_WPE, &flag))
hba->dev_info.f_power_on_wp_en = flag;
- if (!hba->is_init_prefetch)
- ufshcd_init_icc_levels(hba);
-
/* Add required well known logical units to scsi mid layer */
if (ufshcd_scsi_add_wlus(hba))
goto out;
@@ -7006,9 +7009,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
pm_runtime_put_sync(hba->dev);
}
- if (!hba->is_init_prefetch)
- hba->is_init_prefetch = true;
-
out:
/*
* If we failed to initialize the device or the device is not
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index e0fe247..3089b81 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -405,15 +405,6 @@ struct ufs_clk_scaling {
bool is_suspended;
};
-/**
- * struct ufs_init_prefetch - contains data that is pre-fetched once during
- * initialization
- * @icc_level: icc level which was read during initialization
- */
-struct ufs_init_prefetch {
- u32 icc_level;
-};
-
#define UFS_ERR_REG_HIST_LENGTH 8
/**
* struct ufs_err_reg_hist - keeps history of errors
@@ -505,8 +496,6 @@ struct ufs_stats {
* @intr_mask: Interrupt Mask Bits
* @ee_ctrl_mask: Exception event control mask
* @is_powered: flag to check if HBA is powered
- * @is_init_prefetch: flag to check if data was pre-fetched in initialization
- * @init_prefetch_data: data pre-fetched during initialization
* @eh_work: Worker to handle UFS errors that require s/w attention
* @eeh_work: Worker to handle exception events
* @errors: HBA errors
@@ -657,8 +646,6 @@ struct ufs_hba {
u32 intr_mask;
u16 ee_ctrl_mask;
bool is_powered;
- bool is_init_prefetch;
- struct ufs_init_prefetch init_prefetch_data;
/* Work Queues */
struct work_struct eh_work;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 6+ messages in thread