From: Himanshu Madhani <hmadhani@marvell.com>
To: <James.Bottomley@HansenPartnership.com>, <martin.petersen@oracle.com>
Cc: <hmadhani@marvell.com>, <linux-scsi@vger.kernel.org>
Subject: [PATCH 7/8] qla2xxx: Fix device connect issues in P2P configuration
Date: Tue, 5 Nov 2019 07:06:56 -0800 [thread overview]
Message-ID: <20191105150657.8092-8-hmadhani@marvell.com> (raw)
In-Reply-To: <20191105150657.8092-1-hmadhani@marvell.com>
From: Arun Easi <aeasi@marvell.com>
P2P need to take the alternate plogi route.
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
---
drivers/scsi/qla2xxx/qla_gbl.h | 1 +
drivers/scsi/qla2xxx/qla_init.c | 9 +++++++++
drivers/scsi/qla2xxx/qla_iocb.c | 5 ++---
3 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index d11416dcee4e..5b163ad85c34 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -917,4 +917,5 @@ int qla2x00_set_data_rate(scsi_qla_host_t *vha, uint16_t mode);
/* nvme.c */
void qla_nvme_unregister_remote_port(struct fc_port *fcport);
+void qla_handle_els_plogi_done(scsi_qla_host_t *vha, struct event_arg *ea);
#endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index ff4528702b4e..6bb4ddd90b6e 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1717,6 +1717,15 @@ void qla24xx_handle_relogin_event(scsi_qla_host_t *vha,
qla24xx_fcport_handle_login(vha, fcport);
}
+void qla_handle_els_plogi_done(scsi_qla_host_t *vha,
+ struct event_arg *ea)
+{
+ ql_dbg(ql_dbg_disc, vha, 0x2118,
+ "%s %d %8phC post PRLI\n",
+ __func__, __LINE__, ea->fcport->port_name);
+ qla24xx_post_prli_work(vha, ea->fcport);
+}
+
/*
* RSCN(s) came in for this fcport, but the RSCN(s) was not able
* to be consumed by the fcport
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 2b675da34bda..b25f87ff8cde 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2760,9 +2760,8 @@ static void qla2x00_els_dcmd2_sp_done(srb_t *sp, int res)
case CS_COMPLETE:
memset(&ea, 0, sizeof(ea));
ea.fcport = fcport;
- ea.data[0] = MBS_COMMAND_COMPLETE;
- ea.sp = sp;
- qla24xx_handle_plogi_done_event(vha, &ea);
+ ea.rc = res;
+ qla_handle_els_plogi_done(vha, &ea);
break;
case CS_IOCB_ERROR:
--
2.12.0
next prev parent reply other threads:[~2019-11-05 15:07 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-05 15:06 [PATCH 0/8] qla2xxx: Bug Fixes for the driver Himanshu Madhani
2019-11-05 15:06 ` [PATCH 1/8] qla2xxx: Retry PLOGI on FC-NVMe PRLI failure Himanshu Madhani
2019-11-05 15:18 ` Ewan D. Milne
2019-11-05 15:06 ` [PATCH 2/8] qla2xxx: Do command completion on abort timeout Himanshu Madhani
2019-11-05 15:18 ` Ewan D. Milne
2019-11-05 16:57 ` Bart Van Assche
2019-11-07 16:46 ` [EXT] " Himanshu Madhani
2019-11-05 15:06 ` [PATCH 3/8] qla2xxx: Fix SRB leak on switch command timeout Himanshu Madhani
2019-11-05 15:19 ` Ewan D. Milne
2019-11-05 15:06 ` [PATCH 4/8] qla2xxx: Fix driver unload hang Himanshu Madhani
2019-11-05 15:19 ` Ewan D. Milne
2019-11-07 16:54 ` Bart Van Assche
[not found] ` <83CC0DDF-4907-41A2-91EC-1569A07A6BA9@marvell.com>
2019-11-07 17:58 ` Bart Van Assche
2019-11-07 18:30 ` Bart Van Assche
2019-11-08 23:38 ` [EXT] " Himanshu Madhani
2019-11-08 23:58 ` Bart Van Assche
2019-11-05 15:06 ` [PATCH 5/8] qla2xxx: Fix double scsi_done for abort path Himanshu Madhani
2019-11-05 15:20 ` Ewan D. Milne
2019-11-07 18:01 ` Bart Van Assche
2019-11-05 15:06 ` [PATCH 6/8] qla2xxx: Fix memory leak when sending I/O fails Himanshu Madhani
2019-11-05 15:20 ` Ewan D. Milne
2019-11-18 20:25 ` Himanshu Madhani
2019-11-19 5:02 ` Martin K. Petersen
2019-11-05 15:06 ` Himanshu Madhani [this message]
2019-11-05 15:21 ` [PATCH 7/8] qla2xxx: Fix device connect issues in P2P configuration Ewan D. Milne
2019-11-05 15:06 ` [PATCH 8/8] qla2xxx: Update driver version to 10.01.00.21-k Himanshu Madhani
2019-11-05 15:21 ` Ewan D. Milne
2019-11-09 2:16 ` [PATCH 0/8] qla2xxx: Bug Fixes for the driver Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191105150657.8092-8-hmadhani@marvell.com \
--to=hmadhani@marvell.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox