[PATCH] Revert "qla2xxx: Fix Nport ID display value"

[Bart Van Assche <bvanassche@acm.org>]

The commit mentioned in the subject breaks point-to-point mode for at least
the QLE2562 HBA. Restore point-to-point support by reverting that commit.

Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Himanshu Madhani <hmadhani@marvell.com>
Fixes: 0aabb6b699f7 ("scsi: qla2xxx: Fix Nport ID display value")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/qla2xxx/qla_iocb.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index b25f87ff8cde..cfd686fab1b1 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2656,10 +2656,9 @@ qla24xx_els_logo_iocb(srb_t *sp, struct els_entry_24xx *els_iocb)
 	els_iocb->port_id[0] = sp->fcport->d_id.b.al_pa;
 	els_iocb->port_id[1] = sp->fcport->d_id.b.area;
 	els_iocb->port_id[2] = sp->fcport->d_id.b.domain;
-	/* For SID the byte order is different than DID */
-	els_iocb->s_id[1] = vha->d_id.b.al_pa;
-	els_iocb->s_id[2] = vha->d_id.b.area;
-	els_iocb->s_id[0] = vha->d_id.b.domain;
+	els_iocb->s_id[0] = vha->d_id.b.al_pa;
+	els_iocb->s_id[1] = vha->d_id.b.area;
+	els_iocb->s_id[2] = vha->d_id.b.domain;
 
 	if (elsio->u.els_logo.els_cmd == ELS_DCMD_PLOGI) {
 		els_iocb->control_flags = 0;
-- 
2.23.0