From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Suganath Prabu <suganath-prabu.subramani@broadcom.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
Sasha Levin <sashal@kernel.org>,
MPT-FusionLinux.pdl@broadcom.com, linux-scsi@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 207/237] scsi: mpt3sas: Fix Sync cache command failure during driver unload
Date: Sat, 16 Nov 2019 10:40:42 -0500 [thread overview]
Message-ID: <20191116154113.7417-207-sashal@kernel.org> (raw)
In-Reply-To: <20191116154113.7417-1-sashal@kernel.org>
From: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
[ Upstream commit 9029a72500b95578a35877a43473b82cb0386c53 ]
This is to fix SYNC CACHE and START STOP command failures with
DID_NO_CONNECT during driver unload.
In driver's IO submission patch (i.e. in driver's .queuecommand()) driver
won't allow any SCSI commands to the IOC when ioc->remove_host flag is set
and hence SYNC CACHE commands which are issued to the target drives (where
write cache is enabled) during driver unload time is failed with
DID_NO_CONNECT status.
Now modified the driver to allow SYNC CACHE and START STOP commands to IOC,
even when remove_host flag is set.
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 36 +++++++++++++++++++++++++++-
1 file changed, 35 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 73d661a0ecbb9..d3c944d997039 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3791,6 +3791,40 @@ _scsih_tm_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
return _scsih_check_for_pending_tm(ioc, smid);
}
+/** _scsih_allow_scmd_to_device - check whether scmd needs to
+ * issue to IOC or not.
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ *
+ * Returns true if scmd can be issued to IOC otherwise returns false.
+ */
+inline bool _scsih_allow_scmd_to_device(struct MPT3SAS_ADAPTER *ioc,
+ struct scsi_cmnd *scmd)
+{
+
+ if (ioc->pci_error_recovery)
+ return false;
+
+ if (ioc->hba_mpi_version_belonged == MPI2_VERSION) {
+ if (ioc->remove_host)
+ return false;
+
+ return true;
+ }
+
+ if (ioc->remove_host) {
+
+ switch (scmd->cmnd[0]) {
+ case SYNCHRONIZE_CACHE:
+ case START_STOP:
+ return true;
+ default:
+ return false;
+ }
+ }
+
+ return true;
+}
/**
* _scsih_sas_control_complete - completion routine
@@ -4623,7 +4657,7 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
return 0;
}
- if (ioc->pci_error_recovery || ioc->remove_host) {
+ if (!(_scsih_allow_scmd_to_device(ioc, scmd))) {
scmd->result = DID_NO_CONNECT << 16;
scmd->scsi_done(scmd);
return 0;
--
2.20.1
next prev parent reply other threads:[~2019-11-16 16:17 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191116154113.7417-1-sashal@kernel.org>
2019-11-16 15:37 ` [PATCH AUTOSEL 4.19 034/237] scsi: hisi_sas: Feed back linkrate(max/min) when re-attached Sasha Levin
2019-11-16 15:37 ` [PATCH AUTOSEL 4.19 035/237] scsi: hisi_sas: Fix the race between IO completion and timeout for SMP/internal IO Sasha Levin
2019-11-16 15:37 ` [PATCH AUTOSEL 4.19 036/237] scsi: hisi_sas: Free slot later in slot_complete_vx_hw() Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 045/237] scsi: ips: fix missing break in switch Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 051/237] scsi: isci: Use proper enumerated type in atapi_d2h_reg_frame_handler Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 052/237] scsi: isci: Change sci_controller_start_task's return type to sci_status Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 053/237] scsi: bfa: Avoid implicit enum conversion in bfad_im_post_vendor_event Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 054/237] scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_param Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 063/237] scsi: dc395x: fix dma API usage in srb_done Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 064/237] scsi: dc395x: fix DMA API usage in sg_update_list Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 065/237] scsi: zorro_esp: Limit DMA transfers to 65535 bytes Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 090/237] scsi: hisi_sas: Fix NULL pointer dereference Sasha Levin
2019-11-16 15:40 ` Sasha Levin [this message]
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 208/237] scsi: mpt3sas: Don't modify EEDPTagMode field setting on SAS3.5 HBA devices Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 209/237] scsi: mpt3sas: Fix driver modifying persistent data in Manufacturing page11 Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 210/237] scsi: megaraid_sas: Fix msleep granularity Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 211/237] scsi: megaraid_sas: Fix goto labels in error handling Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 212/237] scsi: lpfc: fcoe: Fix link down issue after 1000+ link bounces Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 213/237] scsi: lpfc: Fix odd recovery in duplicate FLOGIs in point-to-point Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 214/237] scsi: lpfc: Correct loss of fc4 type on remote port address change Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191116154113.7417-207-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=MPT-FusionLinux.pdl@broadcom.com \
--cc=andy.shevchenko@gmail.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stable@vger.kernel.org \
--cc=suganath-prabu.subramani@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox