From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Finn Thain <fthain@telegraphics.com.au>,
Michael Schmitz <schmitzmic@gmail.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
Sasha Levin <sashal@kernel.org>,
linux-scsi@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 065/237] scsi: zorro_esp: Limit DMA transfers to 65535 bytes
Date: Sat, 16 Nov 2019 10:38:20 -0500 [thread overview]
Message-ID: <20191116154113.7417-65-sashal@kernel.org> (raw)
In-Reply-To: <20191116154113.7417-1-sashal@kernel.org>
From: Finn Thain <fthain@telegraphics.com.au>
[ Upstream commit b7ded0e8b0d11b6df1c4e5aa23a26e6629c21985 ]
The core driver, esp_scsi, does not use the ESP_CONFIG2_FENAB bit, so the
chip's Transfer Counter register is only 16 bits wide (not 24). A larger
transfer cannot work and will theoretically result in a failed command
and a "DMA length is zero" error.
Fixes: 3109e5ae0311 ("scsi: zorro_esp: New driver for Amiga Zorro NCR53C9x boards")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Cc: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/zorro_esp.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/drivers/scsi/zorro_esp.c b/drivers/scsi/zorro_esp.c
index bb70882e6b56e..be79127db5946 100644
--- a/drivers/scsi/zorro_esp.c
+++ b/drivers/scsi/zorro_esp.c
@@ -245,7 +245,7 @@ static int fastlane_esp_irq_pending(struct esp *esp)
static u32 zorro_esp_dma_length_limit(struct esp *esp, u32 dma_addr,
u32 dma_len)
{
- return dma_len > 0xFFFFFF ? 0xFFFFFF : dma_len;
+ return dma_len > 0xFFFF ? 0xFFFF : dma_len;
}
static void zorro_esp_reset_dma(struct esp *esp)
@@ -484,7 +484,6 @@ static void zorro_esp_send_blz1230_dma_cmd(struct esp *esp, u32 addr,
scsi_esp_cmd(esp, ESP_CMD_DMA);
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
- zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
scsi_esp_cmd(esp, cmd);
}
@@ -529,7 +528,6 @@ static void zorro_esp_send_blz1230II_dma_cmd(struct esp *esp, u32 addr,
scsi_esp_cmd(esp, ESP_CMD_DMA);
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
- zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
scsi_esp_cmd(esp, cmd);
}
@@ -574,7 +572,6 @@ static void zorro_esp_send_blz2060_dma_cmd(struct esp *esp, u32 addr,
scsi_esp_cmd(esp, ESP_CMD_DMA);
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
- zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
scsi_esp_cmd(esp, cmd);
}
@@ -599,7 +596,6 @@ static void zorro_esp_send_cyber_dma_cmd(struct esp *esp, u32 addr,
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
- zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
if (write) {
/* DMA receive */
@@ -649,7 +645,6 @@ static void zorro_esp_send_cyberII_dma_cmd(struct esp *esp, u32 addr,
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
- zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
if (write) {
/* DMA receive */
@@ -691,7 +686,6 @@ static void zorro_esp_send_fastlane_dma_cmd(struct esp *esp, u32 addr,
zorro_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
zorro_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
- zorro_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
if (write) {
/* DMA receive */
--
2.20.1
next prev parent reply other threads:[~2019-11-16 16:25 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191116154113.7417-1-sashal@kernel.org>
2019-11-16 15:37 ` [PATCH AUTOSEL 4.19 034/237] scsi: hisi_sas: Feed back linkrate(max/min) when re-attached Sasha Levin
2019-11-16 15:37 ` [PATCH AUTOSEL 4.19 035/237] scsi: hisi_sas: Fix the race between IO completion and timeout for SMP/internal IO Sasha Levin
2019-11-16 15:37 ` [PATCH AUTOSEL 4.19 036/237] scsi: hisi_sas: Free slot later in slot_complete_vx_hw() Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 045/237] scsi: ips: fix missing break in switch Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 051/237] scsi: isci: Use proper enumerated type in atapi_d2h_reg_frame_handler Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 052/237] scsi: isci: Change sci_controller_start_task's return type to sci_status Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 053/237] scsi: bfa: Avoid implicit enum conversion in bfad_im_post_vendor_event Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 054/237] scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_param Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 063/237] scsi: dc395x: fix dma API usage in srb_done Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 064/237] scsi: dc395x: fix DMA API usage in sg_update_list Sasha Levin
2019-11-16 15:38 ` Sasha Levin [this message]
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 090/237] scsi: hisi_sas: Fix NULL pointer dereference Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 207/237] scsi: mpt3sas: Fix Sync cache command failure during driver unload Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 208/237] scsi: mpt3sas: Don't modify EEDPTagMode field setting on SAS3.5 HBA devices Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 209/237] scsi: mpt3sas: Fix driver modifying persistent data in Manufacturing page11 Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 210/237] scsi: megaraid_sas: Fix msleep granularity Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 211/237] scsi: megaraid_sas: Fix goto labels in error handling Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 212/237] scsi: lpfc: fcoe: Fix link down issue after 1000+ link bounces Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 213/237] scsi: lpfc: Fix odd recovery in duplicate FLOGIs in point-to-point Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 214/237] scsi: lpfc: Correct loss of fc4 type on remote port address change Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191116154113.7417-65-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=fthain@telegraphics.com.au \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=schmitzmic@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox