[PATCH AUTOSEL 4.14 027/150] scsi: ips: fix missing break in switch

[PATCH AUTOSEL 4.14 027/150] scsi: ips: fix missing break in switch

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>

[ Upstream commit 5d25ff7a544889bc4b749fda31778d6a18dddbcb ]

Add missing break statement in order to prevent the code from falling
through to case TEST_UNIT_READY.

Addresses-Coverity-ID: 1357338 ("Missing break in switch")
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ips.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 67621308eb9ca..ea652f1e2071e 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -3497,6 +3497,7 @@ ips_send_cmd(ips_ha_t * ha, ips_scb_t * scb)
 
 		case START_STOP:
 			scb->scsi_cmd->result = DID_OK << 16;
+			break;
 
 		case TEST_UNIT_READY:
 		case INQUIRY:
-- 
2.20.1

[PATCH AUTOSEL 4.14 031/150] scsi: isci: Use proper enumerated type in atapi_d2h_reg_frame_handler

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit e9e9a103528c7e199ead6e5374c9c52cf16b5802 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/scsi/isci/request.c:1629:13: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                        status = SCI_IO_FAILURE_RESPONSE_VALID;
                               ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/request.c:1631:12: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                status = SCI_IO_FAILURE_RESPONSE_VALID;
                       ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

status is of type sci_status but SCI_IO_FAILURE_RESPONSE_VALID is of
type sci_io_status. Use SCI_FAILURE_IO_RESPONSE_VALID, which is from
sci_status and has SCI_IO_FAILURE_RESPONSE_VALID's exact value since
that is what SCI_IO_FAILURE_RESPONSE_VALID is mapped to in the isci.h
file.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/isci/request.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index ed197bc8e801a..2f151708b59ae 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -1626,9 +1626,9 @@ static enum sci_status atapi_d2h_reg_frame_handler(struct isci_request *ireq,
 
 	if (status == SCI_SUCCESS) {
 		if (ireq->stp.rsp.status & ATA_ERR)
-			status = SCI_IO_FAILURE_RESPONSE_VALID;
+			status = SCI_FAILURE_IO_RESPONSE_VALID;
 	} else {
-		status = SCI_IO_FAILURE_RESPONSE_VALID;
+		status = SCI_FAILURE_IO_RESPONSE_VALID;
 	}
 
 	if (status != SCI_SUCCESS) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 032/150] scsi: isci: Change sci_controller_start_task's return type to sci_status

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 362b5da3dfceada6e74ecdd7af3991bbe42c0c0f ]

Clang warns when an enumerated type is implicitly converted to another.

drivers/scsi/isci/request.c:3476:13: warning: implicit conversion from
enumeration type 'enum sci_task_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                        status = sci_controller_start_task(ihost,
                               ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/host.c:2744:10: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
                return SCI_SUCCESS;
                ~~~~~~ ^~~~~~~~~~~
drivers/scsi/isci/host.c:2753:9: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
        return status;
        ~~~~~~ ^~~~~~

Avoid all of these implicit conversion by just making
sci_controller_start_task use sci_status. This silences
Clang and has no functional change since sci_task_status
has all of its values mapped to something in sci_status.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/isci/host.c | 8 ++++----
 drivers/scsi/isci/host.h | 2 +-
 drivers/scsi/isci/task.c | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 609dafd661d14..da4583a2fa23e 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -2717,9 +2717,9 @@ enum sci_status sci_controller_continue_io(struct isci_request *ireq)
  *    the task management request.
  * @task_request: the handle to the task request object to start.
  */
-enum sci_task_status sci_controller_start_task(struct isci_host *ihost,
-					       struct isci_remote_device *idev,
-					       struct isci_request *ireq)
+enum sci_status sci_controller_start_task(struct isci_host *ihost,
+					  struct isci_remote_device *idev,
+					  struct isci_request *ireq)
 {
 	enum sci_status status;
 
@@ -2728,7 +2728,7 @@ enum sci_task_status sci_controller_start_task(struct isci_host *ihost,
 			 "%s: SCIC Controller starting task from invalid "
 			 "state\n",
 			 __func__);
-		return SCI_TASK_FAILURE_INVALID_STATE;
+		return SCI_FAILURE_INVALID_STATE;
 	}
 
 	status = sci_remote_device_start_task(ihost, idev, ireq);
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index b3539928073c6..6bc3f022630a2 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -489,7 +489,7 @@ enum sci_status sci_controller_start_io(
 	struct isci_remote_device *idev,
 	struct isci_request *ireq);
 
-enum sci_task_status sci_controller_start_task(
+enum sci_status sci_controller_start_task(
 	struct isci_host *ihost,
 	struct isci_remote_device *idev,
 	struct isci_request *ireq);
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 6dcaed0c1fc8c..fb6eba331ac6e 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -258,7 +258,7 @@ static int isci_task_execute_tmf(struct isci_host *ihost,
 				 struct isci_tmf *tmf, unsigned long timeout_ms)
 {
 	DECLARE_COMPLETION_ONSTACK(completion);
-	enum sci_task_status status = SCI_TASK_FAILURE;
+	enum sci_status status = SCI_FAILURE;
 	struct isci_request *ireq;
 	int ret = TMF_RESP_FUNC_FAILED;
 	unsigned long flags;
@@ -301,7 +301,7 @@ static int isci_task_execute_tmf(struct isci_host *ihost,
 	/* start the TMF io. */
 	status = sci_controller_start_task(ihost, idev, ireq);
 
-	if (status != SCI_TASK_SUCCESS) {
+	if (status != SCI_SUCCESS) {
 		dev_dbg(&ihost->pdev->dev,
 			 "%s: start_io failed - status = 0x%x, request = %p\n",
 			 __func__,
-- 
2.20.1

[PATCH AUTOSEL 4.14 033/150] scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_param

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 20054597f169090109fc3f0dfa1a48583f4178a4 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/scsi/iscsi_tcp.c:803:15: warning: implicit conversion from
enumeration type 'enum iscsi_host_param' to different enumeration type
'enum iscsi_param' [-Wenum-conversion]
                                                 &addr, param, buf);
                                                        ^~~~~
1 warning generated.

iscsi_conn_get_addr_param handles ISCSI_HOST_PARAM_IPADDRESS just fine
so add an explicit cast to iscsi_param to make it clear to Clang that
this is expected behavior.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/iscsi_tcp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index e11eff6b0e97d..045207b5560eb 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -798,7 +798,8 @@ static int iscsi_sw_tcp_host_get_param(struct Scsi_Host *shost,
 			return rc;
 
 		return iscsi_conn_get_addr_param((struct sockaddr_storage *)
-						 &addr, param, buf);
+						 &addr,
+						 (enum iscsi_param)param, buf);
 	default:
 		return iscsi_host_get_param(shost, param, buf);
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 039/150] scsi: dc395x: fix dma API usage in srb_done

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 3a5bd7021184dec2946f2a4d7a8943f8a5713e52 ]

We can't just transfer ownership to the CPU and then unmap, as this will
break with swiotlb.

Instead unmap the command and sense buffer a little earlier in the I/O
completion handler and get rid of the pci_dma_sync_sg_for_cpu call
entirely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/dc395x.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 5ee7f44cf869b..9da0ac360848f 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -3450,14 +3450,12 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
 		}
 	}
 
-	if (dir != PCI_DMA_NONE && scsi_sg_count(cmd))
-		pci_dma_sync_sg_for_cpu(acb->dev, scsi_sglist(cmd),
-					scsi_sg_count(cmd), dir);
-
 	ckc_only = 0;
 /* Check Error Conditions */
       ckc_e:
 
+	pci_unmap_srb(acb, srb);
+
 	if (cmd->cmnd[0] == INQUIRY) {
 		unsigned char *base = NULL;
 		struct ScsiInqData *ptr;
@@ -3511,7 +3509,6 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
 			cmd, cmd->result);
 		srb_free_insert(acb, srb);
 	}
-	pci_unmap_srb(acb, srb);
 
 	cmd->scsi_done(cmd);
 	waiting_process_next(acb);
-- 
2.20.1

[PATCH AUTOSEL 4.14 040/150] scsi: dc395x: fix DMA API usage in sg_update_list

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 6c404a68bf83b4135a8a9aa1c388ebdf98e8ba7f ]

We need to transfer device ownership to the CPU before we can manipulate
the mapped data.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/dc395x.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 9da0ac360848f..830b2d2dcf206 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -1972,6 +1972,11 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
 			xferred -= psge->length;
 		} else {
 			/* Partial SG entry done */
+			pci_dma_sync_single_for_cpu(srb->dcb->
+					    acb->dev,
+					    srb->sg_bus_addr,
+					    SEGMENTX_LEN,
+					    PCI_DMA_TODEVICE);
 			psge->length -= xferred;
 			psge->address += xferred;
 			srb->sg_index = idx;
-- 
2.20.1

[PATCH AUTOSEL 4.14 127/150] scsi: mpt3sas: Fix Sync cache command failure during driver unload

[Sasha Levin]

From: Suganath Prabu <suganath-prabu.subramani@broadcom.com>

[ Upstream commit 9029a72500b95578a35877a43473b82cb0386c53 ]

This is to fix SYNC CACHE and START STOP command failures with
DID_NO_CONNECT during driver unload.

In driver's IO submission patch (i.e. in driver's .queuecommand()) driver
won't allow any SCSI commands to the IOC when ioc->remove_host flag is set
and hence SYNC CACHE commands which are issued to the target drives (where
write cache is enabled) during driver unload time is failed with
DID_NO_CONNECT status.

Now modified the driver to allow SYNC CACHE and START STOP commands to IOC,
even when remove_host flag is set.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 36 +++++++++++++++++++++++++++-
 1 file changed, 35 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index b28efddab7b1a..9ef0c6265cd2b 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3328,6 +3328,40 @@ _scsih_tm_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 	return _scsih_check_for_pending_tm(ioc, smid);
 }
 
+/** _scsih_allow_scmd_to_device - check whether scmd needs to
+ *				 issue to IOC or not.
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ *
+ * Returns true if scmd can be issued to IOC otherwise returns false.
+ */
+inline bool _scsih_allow_scmd_to_device(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_cmnd *scmd)
+{
+
+	if (ioc->pci_error_recovery)
+		return false;
+
+	if (ioc->hba_mpi_version_belonged == MPI2_VERSION) {
+		if (ioc->remove_host)
+			return false;
+
+		return true;
+	}
+
+	if (ioc->remove_host) {
+
+		switch (scmd->cmnd[0]) {
+		case SYNCHRONIZE_CACHE:
+		case START_STOP:
+			return true;
+		default:
+			return false;
+		}
+	}
+
+	return true;
+}
 
 /**
  * _scsih_sas_control_complete - completion routine
@@ -4100,7 +4134,7 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
 		return 0;
 	}
 
-	if (ioc->pci_error_recovery || ioc->remove_host) {
+	if (!(_scsih_allow_scmd_to_device(ioc, scmd))) {
 		scmd->result = DID_NO_CONNECT << 16;
 		scmd->scsi_done(scmd);
 		return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 128/150] scsi: mpt3sas: Don't modify EEDPTagMode field setting on SAS3.5 HBA devices

[Sasha Levin]

From: Suganath Prabu <suganath-prabu.subramani@broadcom.com>

[ Upstream commit 6cd1bc7b9b5075d395ba0120923903873fc7ea0e ]

If EEDPTagMode field in manufacturing page11 is set then unset it. This is
needed to fix a hardware bug only in SAS3/SAS2 cards. So, skipping
EEDPTagMode changes in Manufacturing page11 for SAS 3.5 controllers.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 7bfe53f48d1d4..817a7963a038b 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -3140,7 +3140,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
 	 * flag unset in NVDATA.
 	 */
 	mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11);
-	if (ioc->manu_pg11.EEDPTagMode == 0) {
+	if (!ioc->is_gen35_ioc && ioc->manu_pg11.EEDPTagMode == 0) {
 		pr_err("%s: overriding NVDATA EEDPTagMode setting\n",
 		    ioc->name);
 		ioc->manu_pg11.EEDPTagMode &= ~0x3;
-- 
2.20.1

[PATCH AUTOSEL 4.14 129/150] scsi: mpt3sas: Fix driver modifying persistent data in Manufacturing page11

[Sasha Levin]

From: Suganath Prabu <suganath-prabu.subramani@broadcom.com>

[ Upstream commit 97f35194093362a63b33caba2485521ddabe2c95 ]

Currently driver is modifying both current & NVRAM/persistent data in
Manufacturing page11. Driver should change only current copy of
Manufacturing page11. It should not modify the persistent data.

So removed the section of code where driver is modifying the persistent
data of Manufacturing page11.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_config.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index dd62701256142..58acbff40abc8 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -674,10 +674,6 @@ mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
 	r = _config_request(ioc, &mpi_request, mpi_reply,
 	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
 	    sizeof(*config_page));
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
  out:
 	return r;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 130/150] scsi: megaraid_sas: Fix msleep granularity

[Sasha Levin]

From: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>

[ Upstream commit 9155cf30a3c4ef97e225d6daddf9bd4b173267e8 ]

In megasas_transition_to_ready() driver waits 180seconds for controller to
change FW state. Here we are calling msleep(1) in a loop for this.  As
explained in timers-howto.txt, msleep(1) will actually sleep longer than
1ms. If a faulty controller is connected, we will end up waiting for much
more than 180 seconds causing unnecessary delays during load.

Change the granularity of msleep() call from 1ms to 1000ms.

Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 8595d83229b77..23a9f0777fa62 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3823,12 +3823,12 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
 		/*
 		 * The cur_state should not last for more than max_wait secs
 		 */
-		for (i = 0; i < (max_wait * 1000); i++) {
+		for (i = 0; i < max_wait; i++) {
 			curr_abs_state = instance->instancet->
 				read_fw_status_reg(instance->reg_set);
 
 			if (abs_state == curr_abs_state) {
-				msleep(1);
+				msleep(1000);
 			} else
 				break;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.14 131/150] scsi: megaraid_sas: Fix goto labels in error handling

[Sasha Levin]

From: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>

[ Upstream commit 8a25fa17b6ed6e6c8101e9c68a10ae68a9025f2c ]

During init, if pci_alloc_irq_vectors() fails, the driver has not yet setup
the IRQs. Fix the goto labels and error handling for this case.

Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 23a9f0777fa62..577513649afbe 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -5324,7 +5324,7 @@ static int megasas_init_fw(struct megasas_instance *instance)
 	if (!instance->msix_vectors) {
 		i = pci_alloc_irq_vectors(instance->pdev, 1, 1, PCI_IRQ_LEGACY);
 		if (i < 0)
-			goto fail_setup_irqs;
+			goto fail_init_adapter;
 	}
 
 	megasas_setup_reply_map(instance);
@@ -5541,9 +5541,8 @@ static int megasas_init_fw(struct megasas_instance *instance)
 
 fail_get_ld_pd_list:
 	instance->instancet->disable_intr(instance);
-fail_init_adapter:
 	megasas_destroy_irqs(instance);
-fail_setup_irqs:
+fail_init_adapter:
 	if (instance->msix_vectors)
 		pci_free_irq_vectors(instance->pdev);
 	instance->msix_vectors = 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 132/150] scsi: lpfc: fcoe: Fix link down issue after 1000+ link bounces

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 036cad1f1ac9ce03e2db94b8460f98eaf1e1ee4c ]

On FCoE adapters, when running link bounce test in a loop, initiator
failed to login with switch switch and required driver reload to
recover. Switch reached a point where all subsequent FLOGIs would be
LS_RJT'd. Further testing showed the condition to be related to not
performing FCF discovery between FLOGI's.

Fix by monitoring FLOGI failures and once a repeated error is seen
repeat FCF discovery.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_els.c     |  2 ++
 drivers/scsi/lpfc/lpfc_hbadisc.c | 20 ++++++++++++++++++++
 drivers/scsi/lpfc/lpfc_init.c    |  2 +-
 drivers/scsi/lpfc/lpfc_sli.c     | 11 ++---------
 drivers/scsi/lpfc/lpfc_sli4.h    |  1 +
 5 files changed, 26 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index ddd29752d96dc..95449f97101d3 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1152,6 +1152,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
 			phba->hba_flag &= ~(FCF_RR_INPROG | HBA_DEVLOSS_TMO);
 			spin_unlock_irq(&phba->hbalock);
+			phba->fcf.fcf_redisc_attempted = 0; /* reset */
 			goto out;
 		}
 		if (!rc) {
@@ -1166,6 +1167,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
 			phba->hba_flag &= ~(FCF_RR_INPROG | HBA_DEVLOSS_TMO);
 			spin_unlock_irq(&phba->hbalock);
+			phba->fcf.fcf_redisc_attempted = 0; /* reset */
 			goto out;
 		}
 	}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index b970933a218d5..d850077c5e226 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1999,6 +1999,26 @@ int lpfc_sli4_fcf_rr_next_proc(struct lpfc_vport *vport, uint16_t fcf_index)
 				"failover and change port state:x%x/x%x\n",
 				phba->pport->port_state, LPFC_VPORT_UNKNOWN);
 		phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+
+		if (!phba->fcf.fcf_redisc_attempted) {
+			lpfc_unregister_fcf(phba);
+
+			rc = lpfc_sli4_redisc_fcf_table(phba);
+			if (!rc) {
+				lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
+						"3195 Rediscover FCF table\n");
+				phba->fcf.fcf_redisc_attempted = 1;
+				lpfc_sli4_clear_fcf_rr_bmask(phba);
+			} else {
+				lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
+						"3196 Rediscover FCF table "
+						"failed. Status:x%x\n", rc);
+			}
+		} else {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
+					"3197 Already rediscover FCF table "
+					"attempted. No more retry\n");
+		}
 		goto stop_flogi_current_fcf;
 	} else {
 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_ELS,
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 25612ccf6ff28..15bcd00dd7a23 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4997,7 +4997,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
 			break;
 		}
 		/* If fast FCF failover rescan event is pending, do nothing */
-		if (phba->fcf.fcf_flag & FCF_REDISC_EVT) {
+		if (phba->fcf.fcf_flag & (FCF_REDISC_EVT | FCF_REDISC_PEND)) {
 			spin_unlock_irq(&phba->hbalock);
 			break;
 		}
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 6c2b098b76095..ebf7d3cda3677 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -18056,15 +18056,8 @@ lpfc_sli4_fcf_rr_next_index_get(struct lpfc_hba *phba)
 			goto initial_priority;
 		lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
 				"2844 No roundrobin failover FCF available\n");
-		if (next_fcf_index >= LPFC_SLI4_FCF_TBL_INDX_MAX)
-			return LPFC_FCOE_FCF_NEXT_NONE;
-		else {
-			lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
-				"3063 Only FCF available idx %d, flag %x\n",
-				next_fcf_index,
-			phba->fcf.fcf_pri[next_fcf_index].fcf_rec.flag);
-			return next_fcf_index;
-		}
+
+		return LPFC_FCOE_FCF_NEXT_NONE;
 	}
 
 	if (next_fcf_index < LPFC_SLI4_FCF_TBL_INDX_MAX &&
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 60200385fe009..a132a83ef233c 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -265,6 +265,7 @@ struct lpfc_fcf {
 #define FCF_REDISC_EVT	0x100 /* FCF rediscovery event to worker thread */
 #define FCF_REDISC_FOV	0x200 /* Post FCF rediscovery fast failover */
 #define FCF_REDISC_PROG (FCF_REDISC_PEND | FCF_REDISC_EVT)
+	uint16_t fcf_redisc_attempted;
 	uint32_t addr_mode;
 	uint32_t eligible_fcf_cnt;
 	struct lpfc_fcf_rec current_rec;
-- 
2.20.1

[PATCH AUTOSEL 4.14 133/150] scsi: lpfc: Correct loss of fc4 type on remote port address change

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit d83ca3ea833d7a66d49225e4191c4e37cab8f079 ]

An address change for a remote port cause PRLI for the wrong protocol
to be sent.  The node copy done in the discovery code skipped copying
the fc4 protocols supported as well.

Fix the copy logic for the address change.  Beefed up log messages in
this area as well.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_els.c       | 26 +++++++++++++++++++++++---
 drivers/scsi/lpfc/lpfc_nportdisc.c |  5 +++--
 2 files changed, 26 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 95449f97101d3..e5db20e8979d5 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1550,8 +1550,10 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 	 */
 	new_ndlp = lpfc_findnode_wwpn(vport, &sp->portName);
 
+	/* return immediately if the WWPN matches ndlp */
 	if (new_ndlp == ndlp && NLP_CHK_NODE_ACT(new_ndlp))
 		return ndlp;
+
 	if (phba->sli_rev == LPFC_SLI_REV4) {
 		active_rrqs_xri_bitmap = mempool_alloc(phba->active_rrq_pool,
 						       GFP_KERNEL);
@@ -1560,9 +1562,13 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 			       phba->cfg_rrq_xri_bitmap_sz);
 	}
 
-	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
-		 "3178 PLOGI confirm: ndlp %p x%x: new_ndlp %p\n",
-		 ndlp, ndlp->nlp_DID, new_ndlp);
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS | LOG_NODE,
+			 "3178 PLOGI confirm: ndlp x%x x%x x%x: "
+			 "new_ndlp x%x x%x x%x\n",
+			 ndlp->nlp_DID, ndlp->nlp_flag,  ndlp->nlp_fc4_type,
+			 (new_ndlp ? new_ndlp->nlp_DID : 0),
+			 (new_ndlp ? new_ndlp->nlp_flag : 0),
+			 (new_ndlp ? new_ndlp->nlp_fc4_type : 0));
 
 	if (!new_ndlp) {
 		rc = memcmp(&ndlp->nlp_portname, name,
@@ -1611,6 +1617,14 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 			       phba->cfg_rrq_xri_bitmap_sz);
 	}
 
+	/* At this point in this routine, we know new_ndlp will be
+	 * returned. however, any previous GID_FTs that were done
+	 * would have updated nlp_fc4_type in ndlp, so we must ensure
+	 * new_ndlp has the right value.
+	 */
+	if (vport->fc_flag & FC_FABRIC)
+		new_ndlp->nlp_fc4_type = ndlp->nlp_fc4_type;
+
 	lpfc_unreg_rpi(vport, new_ndlp);
 	new_ndlp->nlp_DID = ndlp->nlp_DID;
 	new_ndlp->nlp_prev_state = ndlp->nlp_prev_state;
@@ -1732,6 +1746,12 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 	    active_rrqs_xri_bitmap)
 		mempool_free(active_rrqs_xri_bitmap,
 			     phba->active_rrq_pool);
+
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS | LOG_NODE,
+			 "3173 PLOGI confirm exit: new_ndlp x%x x%x x%x\n",
+			 new_ndlp->nlp_DID, new_ndlp->nlp_flag,
+			 new_ndlp->nlp_fc4_type);
+
 	return new_ndlp;
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index a0658d1582287..043bca6449cd0 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -2829,8 +2829,9 @@ lpfc_disc_state_machine(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	/* DSM in event <evt> on NPort <nlp_DID> in state <cur_state> */
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
 			 "0211 DSM in event x%x on NPort x%x in "
-			 "state %d Data: x%x\n",
-			 evt, ndlp->nlp_DID, cur_state, ndlp->nlp_flag);
+			 "state %d Data: x%x x%x\n",
+			 evt, ndlp->nlp_DID, cur_state,
+			 ndlp->nlp_flag, ndlp->nlp_fc4_type);
 
 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_DSM,
 		 "DSM in:          evt:%d ste:%d did:x%x",
-- 
2.20.1