[PATCH AUTOSEL 6.0 23/44] scsi: ibmvfc: Avoid path failures during live migration

[PATCH AUTOSEL 6.0 23/44] scsi: ibmvfc: Avoid path failures during live migration

[Sasha Levin]

From: Brian King <brking@linux.vnet.ibm.com>

[ Upstream commit 62fa3ce05d5d73c5eccc40b2db493f55fecfc446 ]

Fix an issue reported when performing a live migration when multipath is
configured with a short fast fail timeout of 5 seconds and also to have
no_path_retry set to fail. In this scenario, all paths would go into the
devloss state while the ibmvfc driver went through discovery to log back
in. On a loaded system, the discovery might take longer than 5 seconds,
which was resulting in all paths being marked failed, which then resulted
in a read only filesystem.

This patch changes the migration code in ibmvfc to avoid deleting rports at
all in this scenario, so we avoid losing all paths.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20221026181356.148517-1-brking@linux.vnet.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 00684e11976b..1a0c0b7289d2 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -708,8 +708,13 @@ static void ibmvfc_init_host(struct ibmvfc_host *vhost)
 		memset(vhost->async_crq.msgs.async, 0, PAGE_SIZE);
 		vhost->async_crq.cur = 0;
 
-		list_for_each_entry(tgt, &vhost->targets, queue)
-			ibmvfc_del_tgt(tgt);
+		list_for_each_entry(tgt, &vhost->targets, queue) {
+			if (vhost->client_migrated)
+				tgt->need_login = 1;
+			else
+				ibmvfc_del_tgt(tgt);
+		}
+
 		scsi_block_requests(vhost->host);
 		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
 		vhost->job_step = ibmvfc_npiv_login;
@@ -3235,9 +3240,12 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost,
 			/* We need to re-setup the interpartition connection */
 			dev_info(vhost->dev, "Partition migrated, Re-enabling adapter\n");
 			vhost->client_migrated = 1;
+
+			scsi_block_requests(vhost->host);
 			ibmvfc_purge_requests(vhost, DID_REQUEUE);
-			ibmvfc_link_down(vhost, IBMVFC_LINK_DOWN);
+			ibmvfc_set_host_state(vhost, IBMVFC_LINK_DOWN);
 			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_REENABLE);
+			wake_up(&vhost->work_wait_q);
 		} else if (crq->format == IBMVFC_PARTNER_FAILED || crq->format == IBMVFC_PARTNER_DEREGISTER) {
 			dev_err(vhost->dev, "Host partner adapter deregistered or failed (rc=%d)\n", crq->format);
 			ibmvfc_purge_requests(vhost, DID_ERROR);
-- 
2.35.1

[PATCH AUTOSEL 6.0 24/44] scsi: scsi_debug: Make the READ CAPACITY response compliant with ZBC

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit ecb8c2580d37dbb641451049376d80c8afaa387f ]

From ZBC-1:

 - RC BASIS = 0: The RETURNED LOGICAL BLOCK ADDRESS field indicates the
   highest LBA of a contiguous range of zones that are not sequential write
   required zones starting with the first zone.

 - RC BASIS = 1: The RETURNED LOGICAL BLOCK ADDRESS field indicates the LBA
   of the last logical block on the logical unit.

The current scsi_debug READ CAPACITY response does not comply with the
above if there are one or more sequential write required zones. SCSI
initiators need a way to retrieve the largest valid LBA from SCSI
devices. Reporting the largest valid LBA if there are one or more
sequential zones requires to set the RC BASIS field in the READ CAPACITY
response to one. Hence this patch.

Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221102193248.3177608-1-bvanassche@acm.org
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_debug.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index b8a76b89f85a..d474b3da8914 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -1899,6 +1899,13 @@ static int resp_readcap16(struct scsi_cmnd *scp,
 			arr[14] |= 0x40;
 	}
 
+	/*
+	 * Since the scsi_debug READ CAPACITY implementation always reports the
+	 * total disk capacity, set RC BASIS = 1 for host-managed ZBC devices.
+	 */
+	if (devip->zmodel == BLK_ZONED_HM)
+		arr[12] |= 1 << 4;
+
 	arr[15] = sdebug_lowest_aligned & 0xff;
 
 	if (have_dif_prot) {
-- 
2.35.1