public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Bart Van Assche <bvanassche@acm.org>
To: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org, linux-scsi@vger.kernel.org,
	Christoph Hellwig <hch@lst.de>,
	Adrian Hunter <adrian.hunter@intel.com>,
	Avri Altman <avri.altman@wdc.com>,
	Bart Van Assche <bvanassche@acm.org>,
	Ming Lei <ming.lei@redhat.com>,
	Damien Le Moal <damien.lemoal@opensource.wdc.com>,
	Chaitanya Kulkarni <kch@nvidia.com>
Subject: [PATCH v2 8/8] null_blk: Support configuring the maximum segment size
Date: Wed, 23 Nov 2022 12:57:40 -0800	[thread overview]
Message-ID: <20221123205740.463185-9-bvanassche@acm.org> (raw)
In-Reply-To: <20221123205740.463185-1-bvanassche@acm.org>

Add support for configuring the maximum segment size.

Add support for segments smaller than the page size.

This patch enables testing segments smaller than the page size with a
driver that does not call blk_rq_map_sg().

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/block/null_blk/main.c     | 20 +++++++++++++++++---
 drivers/block/null_blk/null_blk.h |  1 +
 2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
index 1f154f92f4c2..bc811ab52c4a 100644
--- a/drivers/block/null_blk/main.c
+++ b/drivers/block/null_blk/main.c
@@ -157,6 +157,10 @@ static int g_max_sectors;
 module_param_named(max_sectors, g_max_sectors, int, 0444);
 MODULE_PARM_DESC(max_sectors, "Maximum size of a command (in 512B sectors)");
 
+static unsigned int g_max_segment_size = 1UL << 31;
+module_param_named(max_segment_size, g_max_segment_size, int, 0444);
+MODULE_PARM_DESC(max_segment_size, "Maximum size of a segment in bytes");
+
 static unsigned int nr_devices = 1;
 module_param(nr_devices, uint, 0444);
 MODULE_PARM_DESC(nr_devices, "Number of devices to register");
@@ -409,6 +413,7 @@ NULLB_DEVICE_ATTR(home_node, uint, NULL);
 NULLB_DEVICE_ATTR(queue_mode, uint, NULL);
 NULLB_DEVICE_ATTR(blocksize, uint, NULL);
 NULLB_DEVICE_ATTR(max_sectors, uint, NULL);
+NULLB_DEVICE_ATTR(max_segment_size, uint, NULL);
 NULLB_DEVICE_ATTR(irqmode, uint, NULL);
 NULLB_DEVICE_ATTR(hw_queue_depth, uint, NULL);
 NULLB_DEVICE_ATTR(index, uint, NULL);
@@ -532,6 +537,7 @@ static struct configfs_attribute *nullb_device_attrs[] = {
 	&nullb_device_attr_queue_mode,
 	&nullb_device_attr_blocksize,
 	&nullb_device_attr_max_sectors,
+	&nullb_device_attr_max_segment_size,
 	&nullb_device_attr_irqmode,
 	&nullb_device_attr_hw_queue_depth,
 	&nullb_device_attr_index,
@@ -610,7 +616,8 @@ static ssize_t memb_group_features_show(struct config_item *item, char *page)
 	return snprintf(page, PAGE_SIZE,
 			"badblocks,blocking,blocksize,cache_size,"
 			"completion_nsec,discard,home_node,hw_queue_depth,"
-			"irqmode,max_sectors,mbps,memory_backed,no_sched,"
+			"irqmode,max_sectors,max_segment_size,mbps,"
+			"memory_backed,no_sched,"
 			"poll_queues,power,queue_mode,shared_tag_bitmap,size,"
 			"submit_queues,use_per_node_hctx,virt_boundary,zoned,"
 			"zone_capacity,zone_max_active,zone_max_open,"
@@ -673,6 +680,7 @@ static struct nullb_device *null_alloc_dev(void)
 	dev->queue_mode = g_queue_mode;
 	dev->blocksize = g_bs;
 	dev->max_sectors = g_max_sectors;
+	dev->max_segment_size = g_max_segment_size;
 	dev->irqmode = g_irqmode;
 	dev->hw_queue_depth = g_hw_queue_depth;
 	dev->blocking = g_blocking;
@@ -1214,6 +1222,8 @@ static int null_transfer(struct nullb *nullb, struct page *page,
 	unsigned int valid_len = len;
 	int err = 0;
 
+	WARN_ONCE(len > dev->max_segment_size, "%u > %u\n", len,
+		  dev->max_segment_size);
 	if (!is_write) {
 		if (dev->zoned)
 			valid_len = null_zone_valid_read_len(nullb,
@@ -1249,7 +1259,8 @@ static int null_handle_rq(struct nullb_cmd *cmd)
 
 	spin_lock_irq(&nullb->lock);
 	rq_for_each_segment(bvec, rq, iter) {
-		len = bvec.bv_len;
+		len = min(bvec.bv_len, nullb->dev->max_segment_size);
+		bvec.bv_len = len;
 		err = null_transfer(nullb, bvec.bv_page, len, bvec.bv_offset,
 				     op_is_write(req_op(rq)), sector,
 				     rq->cmd_flags & REQ_FUA);
@@ -1276,7 +1287,8 @@ static int null_handle_bio(struct nullb_cmd *cmd)
 
 	spin_lock_irq(&nullb->lock);
 	bio_for_each_segment(bvec, bio, iter) {
-		len = bvec.bv_len;
+		len = min(bvec.bv_len, nullb->dev->max_segment_size);
+		bvec.bv_len = len;
 		err = null_transfer(nullb, bvec.bv_page, len, bvec.bv_offset,
 				     op_is_write(bio_op(bio)), sector,
 				     bio->bi_opf & REQ_FUA);
@@ -2088,6 +2100,7 @@ static int null_add_dev(struct nullb_device *dev)
 	nullb->q->queuedata = nullb;
 	blk_queue_flag_set(QUEUE_FLAG_NONROT, nullb->q);
 	blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, nullb->q);
+	blk_queue_flag_set(QUEUE_FLAG_SUB_PAGE_SEGMENTS, nullb->q);
 
 	mutex_lock(&lock);
 	rv = ida_simple_get(&nullb_indexes, 0, 0, GFP_KERNEL);
@@ -2106,6 +2119,7 @@ static int null_add_dev(struct nullb_device *dev)
 	dev->max_sectors = min_t(unsigned int, dev->max_sectors,
 				 BLK_DEF_MAX_SECTORS);
 	blk_queue_max_hw_sectors(nullb->q, dev->max_sectors);
+	blk_queue_max_segment_size(nullb->q, dev->max_segment_size);
 
 	if (dev->virt_boundary)
 		blk_queue_virt_boundary(nullb->q, PAGE_SIZE - 1);
diff --git a/drivers/block/null_blk/null_blk.h b/drivers/block/null_blk/null_blk.h
index 94ff68052b1e..6784ee9f5fda 100644
--- a/drivers/block/null_blk/null_blk.h
+++ b/drivers/block/null_blk/null_blk.h
@@ -102,6 +102,7 @@ struct nullb_device {
 	unsigned int queue_mode; /* block interface */
 	unsigned int blocksize; /* block size */
 	unsigned int max_sectors; /* Max sectors per command */
+	unsigned int max_segment_size; /* Max size of a single DMA segment. */
 	unsigned int irqmode; /* IRQ completion handler */
 	unsigned int hw_queue_depth; /* queue depth */
 	unsigned int index; /* index of the disk, only valid with a disk */

  parent reply	other threads:[~2022-11-23 20:58 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-23 20:57 [PATCH v2 0/8] Add support for segments smaller than one page Bart Van Assche
2022-11-23 20:57 ` [PATCH v2 1/8] block: Introduce CONFIG_BLK_SUB_PAGE_SEGMENTS and QUEUE_FLAG_SUB_PAGE_SEGMENTS Bart Van Assche
2022-11-23 20:57 ` [PATCH v2 2/8] block: Support configuring limits below the page size Bart Van Assche
2022-11-23 20:57 ` [PATCH v2 3/8] block: Support submitting passthrough requests with small segments Bart Van Assche
2022-11-23 20:57 ` [PATCH v2 4/8] block: Add support for filesystem requests and " Bart Van Assche
2022-11-23 20:57 ` [PATCH v2 5/8] block: Add support for small segments in blk_rq_map_user_iov() Bart Van Assche
2022-11-23 20:57 ` [PATCH v2 6/8] scsi: core: Set the SUB_PAGE_SEGMENTS request queue flag Bart Van Assche
2022-11-23 20:57 ` [PATCH v2 7/8] scsi_debug: Support configuring the maximum segment size Bart Van Assche
2022-11-25 17:34   ` Douglas Gilbert
2022-11-30 22:30     ` Bart Van Assche
2022-11-23 20:57 ` Bart Van Assche [this message]
2022-11-24  1:40   ` [PATCH v2 8/8] null_blk: " Damien Le Moal
2022-11-30 22:29     ` Bart Van Assche
2022-12-01  0:39       ` Damien Le Moal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221123205740.463185-9-bvanassche@acm.org \
    --to=bvanassche@acm.org \
    --cc=adrian.hunter@intel.com \
    --cc=avri.altman@wdc.com \
    --cc=axboe@kernel.dk \
    --cc=damien.lemoal@opensource.wdc.com \
    --cc=hch@lst.de \
    --cc=kch@nvidia.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=ming.lei@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox