From: John Garry <john.g.garry@oracle.com>
To: jejb@linux.ibm.com, martin.petersen@oracle.com, dgilbert@interlog.com
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
bvanassche@acm.org, John Garry <john.g.garry@oracle.com>
Subject: [PATCH v3 03/11] scsi: scsi_debug: Change shost list lock to a mutex
Date: Mon, 27 Mar 2023 07:43:02 +0000 [thread overview]
Message-ID: <20230327074310.1862889-4-john.g.garry@oracle.com> (raw)
In-Reply-To: <20230327074310.1862889-1-john.g.garry@oracle.com>
The shost list lock, sdebug_host_list_lock, is a spinlock. We would only
lock in non-atomic context in this driver, so use a mutex instead, which
is friendlier if we need to schedule when iterating.
Signed-off-by: John Garry <john.g.garry@oracle.com>
---
drivers/scsi/scsi_debug.c | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index eba6eca81e84..a61e7c31dab5 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -816,7 +816,7 @@ static int sdebug_cylinders_per; /* cylinders per surface */
static int sdebug_sectors_per; /* sectors per cylinder */
static LIST_HEAD(sdebug_host_list);
-static DEFINE_SPINLOCK(sdebug_host_list_lock);
+static DEFINE_MUTEX(sdebug_host_list_mutex);
static struct xarray per_store_arr;
static struct xarray *per_store_ap = &per_store_arr;
@@ -908,7 +908,7 @@ static void sdebug_max_tgts_luns(void)
struct sdebug_host_info *sdbg_host;
struct Scsi_Host *hpnt;
- spin_lock(&sdebug_host_list_lock);
+ mutex_lock(&sdebug_host_list_mutex);
list_for_each_entry(sdbg_host, &sdebug_host_list, host_list) {
hpnt = sdbg_host->shost;
if ((hpnt->this_id >= 0) &&
@@ -919,7 +919,7 @@ static void sdebug_max_tgts_luns(void)
/* sdebug_max_luns; */
hpnt->max_lun = SCSI_W_LUN_REPORT_LUNS + 1;
}
- spin_unlock(&sdebug_host_list_lock);
+ mutex_unlock(&sdebug_host_list_mutex);
}
enum sdeb_cmd_data {SDEB_IN_DATA = 0, SDEB_IN_CDB = 1};
@@ -1051,14 +1051,14 @@ static void all_config_cdb_len(void)
struct Scsi_Host *shost;
struct scsi_device *sdev;
- spin_lock(&sdebug_host_list_lock);
+ mutex_lock(&sdebug_host_list_mutex);
list_for_each_entry(sdbg_host, &sdebug_host_list, host_list) {
shost = sdbg_host->shost;
shost_for_each_device(sdev, shost) {
config_cdb_len(sdev);
}
}
- spin_unlock(&sdebug_host_list_lock);
+ mutex_unlock(&sdebug_host_list_mutex);
}
static void clear_luns_changed_on_target(struct sdebug_dev_info *devip)
@@ -5423,7 +5423,7 @@ static int scsi_debug_host_reset(struct scsi_cmnd *SCpnt)
++num_host_resets;
if (SDEBUG_OPT_ALL_NOISE & sdebug_opts)
sdev_printk(KERN_INFO, SCpnt->device, "%s\n", __func__);
- spin_lock(&sdebug_host_list_lock);
+ mutex_lock(&sdebug_host_list_mutex);
list_for_each_entry(sdbg_host, &sdebug_host_list, host_list) {
list_for_each_entry(devip, &sdbg_host->dev_info_list,
dev_list) {
@@ -5431,7 +5431,7 @@ static int scsi_debug_host_reset(struct scsi_cmnd *SCpnt)
++k;
}
}
- spin_unlock(&sdebug_host_list_lock);
+ mutex_unlock(&sdebug_host_list_mutex);
stop_all_queued();
if (SDEBUG_OPT_RESET_NOISE & sdebug_opts)
sdev_printk(KERN_INFO, SCpnt->device,
@@ -6337,13 +6337,13 @@ static ssize_t lun_format_store(struct device_driver *ddp, const char *buf,
struct sdebug_host_info *sdhp;
struct sdebug_dev_info *dp;
- spin_lock(&sdebug_host_list_lock);
+ mutex_lock(&sdebug_host_list_mutex);
list_for_each_entry(sdhp, &sdebug_host_list, host_list) {
list_for_each_entry(dp, &sdhp->dev_info_list, dev_list) {
set_bit(SDEBUG_UA_LUNS_CHANGED, dp->uas_bm);
}
}
- spin_unlock(&sdebug_host_list_lock);
+ mutex_unlock(&sdebug_host_list_mutex);
}
return count;
}
@@ -6373,7 +6373,7 @@ static ssize_t max_luns_store(struct device_driver *ddp, const char *buf,
struct sdebug_host_info *sdhp;
struct sdebug_dev_info *dp;
- spin_lock(&sdebug_host_list_lock);
+ mutex_lock(&sdebug_host_list_mutex);
list_for_each_entry(sdhp, &sdebug_host_list,
host_list) {
list_for_each_entry(dp, &sdhp->dev_info_list,
@@ -6382,7 +6382,7 @@ static ssize_t max_luns_store(struct device_driver *ddp, const char *buf,
dp->uas_bm);
}
}
- spin_unlock(&sdebug_host_list_lock);
+ mutex_unlock(&sdebug_host_list_mutex);
}
return count;
}
@@ -6489,7 +6489,7 @@ static ssize_t virtual_gb_store(struct device_driver *ddp, const char *buf,
struct sdebug_host_info *sdhp;
struct sdebug_dev_info *dp;
- spin_lock(&sdebug_host_list_lock);
+ mutex_lock(&sdebug_host_list_mutex);
list_for_each_entry(sdhp, &sdebug_host_list,
host_list) {
list_for_each_entry(dp, &sdhp->dev_info_list,
@@ -6498,7 +6498,7 @@ static ssize_t virtual_gb_store(struct device_driver *ddp, const char *buf,
dp->uas_bm);
}
}
- spin_unlock(&sdebug_host_list_lock);
+ mutex_unlock(&sdebug_host_list_mutex);
}
return count;
}
@@ -7258,9 +7258,9 @@ static int sdebug_add_host_helper(int per_host_idx)
goto clean;
}
- spin_lock(&sdebug_host_list_lock);
+ mutex_lock(&sdebug_host_list_mutex);
list_add_tail(&sdbg_host->host_list, &sdebug_host_list);
- spin_unlock(&sdebug_host_list_lock);
+ mutex_unlock(&sdebug_host_list_mutex);
sdbg_host->dev.bus = &pseudo_lld_bus;
sdbg_host->dev.parent = pseudo_primary;
@@ -7269,9 +7269,9 @@ static int sdebug_add_host_helper(int per_host_idx)
error = device_register(&sdbg_host->dev);
if (error) {
- spin_lock(&sdebug_host_list_lock);
+ mutex_lock(&sdebug_host_list_mutex);
list_del(&sdbg_host->host_list);
- spin_unlock(&sdebug_host_list_lock);
+ mutex_unlock(&sdebug_host_list_mutex);
goto clean;
}
@@ -7311,7 +7311,7 @@ static void sdebug_do_remove_host(bool the_end)
struct sdebug_host_info *sdbg_host = NULL;
struct sdebug_host_info *sdbg_host2;
- spin_lock(&sdebug_host_list_lock);
+ mutex_lock(&sdebug_host_list_mutex);
if (!list_empty(&sdebug_host_list)) {
sdbg_host = list_entry(sdebug_host_list.prev,
struct sdebug_host_info, host_list);
@@ -7336,7 +7336,7 @@ static void sdebug_do_remove_host(bool the_end)
}
if (sdbg_host)
list_del(&sdbg_host->host_list);
- spin_unlock(&sdebug_host_list_lock);
+ mutex_unlock(&sdebug_host_list_mutex);
if (!sdbg_host)
return;
--
2.35.3
next prev parent reply other threads:[~2023-03-27 7:43 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-27 7:42 [PATCH v3 00/11] Fix shost command overloading issues John Garry
2023-03-27 7:43 ` [PATCH v3 01/11] scsi: scsi_debug: Fix check for sdev queue full John Garry
2023-03-28 23:35 ` Douglas Gilbert
2023-03-29 4:20 ` Yi Zhang
2023-03-27 7:43 ` [PATCH v3 02/11] scsi: scsi_debug: Don't iter all shosts in clear_luns_changed_on_target() John Garry
2023-03-28 23:39 ` Douglas Gilbert
2023-03-27 7:43 ` John Garry [this message]
2023-03-28 23:40 ` [PATCH v3 03/11] scsi: scsi_debug: Change shost list lock to a mutex Douglas Gilbert
2023-03-27 7:43 ` [PATCH v3 04/11] scsi: scsi_debug: Protect block_unblock_all_queues() with mutex John Garry
2023-04-03 5:11 ` Douglas Gilbert
2023-03-27 7:43 ` [PATCH v3 05/11] scsi: scsi_debug: Use scsi_block_requests() to block queues John Garry
2023-04-03 5:13 ` Douglas Gilbert
2023-03-27 7:43 ` [PATCH v3 06/11] scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd John Garry
2023-04-03 5:18 ` Douglas Gilbert
2023-03-27 7:43 ` [PATCH v3 07/11] scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in sdebug_blk_mq_poll() John Garry
2023-04-03 5:19 ` Douglas Gilbert
2023-03-27 7:43 ` [PATCH v3 08/11] scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in stop_all_queued() John Garry
2023-04-03 5:20 ` Douglas Gilbert
2023-03-27 7:43 ` [PATCH v3 09/11] scsi: scsi_debug: Use scsi_host_busy() in delay_store() and ndelay_store() John Garry
2023-04-03 5:21 ` Douglas Gilbert
2023-03-27 7:43 ` [PATCH v3 10/11] scsi: scsi_debug: Only allow sdebug_max_queue be modified when no shosts John Garry
2023-04-03 5:23 ` Douglas Gilbert
2023-03-27 7:43 ` [PATCH v3 11/11] scsi: scsi_debug: Drop sdebug_queue John Garry
2023-04-03 5:26 ` Douglas Gilbert
2023-04-03 2:15 ` [PATCH v3 00/11] Fix shost command overloading issues Martin K. Petersen
2023-04-12 2:04 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230327074310.1862889-4-john.g.garry@oracle.com \
--to=john.g.garry@oracle.com \
--cc=bvanassche@acm.org \
--cc=dgilbert@interlog.com \
--cc=jejb@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox