From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Stanley Chu <stanley.chu@mediatek.com>,
Can Guo <quic_cang@quicinc.com>,
Manivannan Sadhasivam <mani@kernel.org>,
Asutosh Das <quic_asutoshd@quicinc.com>,
Bean Huo <beanhuo@micron.com>,
"Bao D. Nguyen" <quic_nguyenb@quicinc.com>,
Arthur Simchaev <Arthur.Simchaev@wdc.com>,
Po-Wen Kao <powen.kao@mediatek.com>,
Eric Biggers <ebiggers@google.com>,
Keoseong Park <keosung.park@samsung.com>
Subject: [PATCH 2/4] scsi: ufs: Move the 4K alignment code into the Exynos driver
Date: Mon, 18 Sep 2023 09:20:13 -0700 [thread overview]
Message-ID: <20230918162058.1562033-3-bvanassche@acm.org> (raw)
In-Reply-To: <20230918162058.1562033-1-bvanassche@acm.org>
The DMA alignment for the Exynos controller follows directly from the
PRDT segment size configured in ufs-exynos.c. Hence, move the DMA
alignment code into the Exynos driver source code.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/ufs/core/ufshcd.c | 6 ++++--
drivers/ufs/host/ufs-exynos.c | 9 +++++++--
include/ufs/ufshcd.h | 7 ++-----
3 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 5fccec3c1091..100729981738 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -5098,8 +5098,7 @@ static int ufshcd_slave_configure(struct scsi_device *sdev)
struct request_queue *q = sdev->request_queue;
blk_queue_update_dma_pad(q, PRDT_DATA_BYTE_COUNT_PAD - 1);
- if (hba->quirks & UFSHCD_QUIRK_4KB_DMA_ALIGNMENT)
- blk_queue_update_dma_alignment(q, SZ_4K - 1);
+
/*
* Block runtime-pm until all consumers are added.
* Refer ufshcd_setup_links().
@@ -5115,6 +5114,9 @@ static int ufshcd_slave_configure(struct scsi_device *sdev)
*/
sdev->silence_suspend = 1;
+ if (hba->vops && hba->vops->config_scsi_dev)
+ hba->vops->config_scsi_dev(sdev);
+
ufshcd_crypto_register(hba, q);
return 0;
diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index 3396e0388512..e5d145a2676e 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -1511,6 +1511,11 @@ static int fsd_ufs_pre_link(struct exynos_ufs *ufs)
return 0;
}
+static void exynos_ufs_config_scsi_dev(struct scsi_device *sdev)
+{
+ blk_queue_update_dma_alignment(sdev->request_queue, SZ_4K - 1);
+}
+
static int fsd_ufs_post_link(struct exynos_ufs *ufs)
{
int i;
@@ -1579,6 +1584,7 @@ static const struct ufs_hba_variant_ops ufs_hba_exynos_ops = {
.hibern8_notify = exynos_ufs_hibern8_notify,
.suspend = exynos_ufs_suspend,
.resume = exynos_ufs_resume,
+ .config_scsi_dev = exynos_ufs_config_scsi_dev,
};
static struct ufs_hba_variant_ops ufs_hba_exynosauto_vh_ops = {
@@ -1680,8 +1686,7 @@ static const struct exynos_ufs_drv_data exynos_ufs_drvs = {
UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR |
UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR |
UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL |
- UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING |
- UFSHCD_QUIRK_4KB_DMA_ALIGNMENT,
+ UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING,
.opts = EXYNOS_UFS_OPT_HAS_APB_CLK_CTRL |
EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL |
EXYNOS_UFS_OPT_BROKEN_RX_SEL_IDX |
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index 7d07b256e906..e0d6590d163d 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -28,6 +28,7 @@
#define UFSHCD "ufshcd"
+struct scsi_device;
struct ufs_hba;
enum dev_cmd_type {
@@ -371,6 +372,7 @@ struct ufs_hba_variant_ops {
int (*get_outstanding_cqs)(struct ufs_hba *hba,
unsigned long *ocqs);
int (*config_esi)(struct ufs_hba *hba);
+ void (*config_scsi_dev)(struct scsi_device *sdev);
};
/* clock gating state */
@@ -596,11 +598,6 @@ enum ufshcd_quirks {
*/
UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13,
- /*
- * Align DMA SG entries on a 4 KiB boundary.
- */
- UFSHCD_QUIRK_4KB_DMA_ALIGNMENT = 1 << 14,
-
/*
* This quirk needs to be enabled if the host controller does not
* support UIC command
next prev parent reply other threads:[~2023-09-18 16:28 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-18 16:20 [PATCH 0/4] UFS core patches Bart Van Assche
2023-09-18 16:20 ` [PATCH 1/4] scsi: ufs: Return in case of an invalid tag Bart Van Assche
2023-09-19 22:47 ` Daejun Park
2023-09-19 23:29 ` Bart Van Assche
2023-09-20 7:13 ` John Garry
2023-09-20 14:40 ` Bart Van Assche
2023-09-18 16:20 ` Bart Van Assche [this message]
2023-09-18 16:20 ` [PATCH 3/4] scsi: ufs: Simplify ufshcd_comp_scsi_upiu() Bart Van Assche
2023-09-18 16:20 ` [PATCH 4/4] scsi: ufs: Set the Command Priority (CP) flag for RT requests Bart Van Assche
2023-09-19 18:37 ` Avri Altman
2023-09-19 21:05 ` Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230918162058.1562033-3-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=Arthur.Simchaev@wdc.com \
--cc=alim.akhtar@samsung.com \
--cc=beanhuo@micron.com \
--cc=ebiggers@google.com \
--cc=jejb@linux.ibm.com \
--cc=keosung.park@samsung.com \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mani@kernel.org \
--cc=martin.petersen@oracle.com \
--cc=powen.kao@mediatek.com \
--cc=quic_asutoshd@quicinc.com \
--cc=quic_cang@quicinc.com \
--cc=quic_nguyenb@quicinc.com \
--cc=stanley.chu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox