From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>,
"James E . J . Bottomley" <James.Bottomley@HansenPartnership.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
"Rafael J . Wysocki" <rafael@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Avri Altman <avri.altman@wdc.com>,
Bart Van Assche <bvanassche@acm.org>,
YiFeng Zhao <zyf@rock-chips.com>, Liang Chen <cl@rock-chips.com>,
linux-scsi@vger.kernel.org, linux-rockchip@lists.infradead.org,
devicetree@vger.kernel.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH v4 2/7] dt-bindings: ufs: Document Rockchip UFS host controller
Date: Thu, 7 Nov 2024 15:42:54 +0000 [thread overview]
Message-ID: <20241107154254.bpuqspdrymyg3qsa@thinkpad> (raw)
In-Reply-To: <1730705521-23081-3-git-send-email-shawn.lin@rock-chips.com>
On Mon, Nov 04, 2024 at 03:31:56PM +0800, Shawn Lin wrote:
> Document Rockchip UFS host controller for RK3576 SoC.
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> ---
>
> Changes in v4:
> - properly describe reset-gpios
>
> Changes in v3:
> - rename the file to rockchip,rk3576-ufshc.yaml
> - add description for reset-gpios
> - use rockchip,rk3576-ufshc as compatible
>
> Changes in v2:
> - rename the file
> - add reset-gpios
>
> .../bindings/ufs/rockchip,rk3576-ufshc.yaml | 105 +++++++++++++++++++++
> 1 file changed, 105 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/ufs/rockchip,rk3576-ufshc.yaml
>
> diff --git a/Documentation/devicetree/bindings/ufs/rockchip,rk3576-ufshc.yaml b/Documentation/devicetree/bindings/ufs/rockchip,rk3576-ufshc.yaml
> new file mode 100644
> index 0000000..bc4c3de
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ufs/rockchip,rk3576-ufshc.yaml
> @@ -0,0 +1,105 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/ufs/rockchip,rk3576-ufshc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip UFS Host Controller
> +
> +maintainers:
> + - Shawn Lin <shawn.lin@rock-chips.com>
> +
> +allOf:
> + - $ref: ufs-common.yaml
> +
> +properties:
> + compatible:
> + const: rockchip,rk3576-ufshc
> +
> + reg:
> + maxItems: 5
> +
> + reg-names:
> + items:
> + - const: hci
> + - const: mphy
> + - const: hci_grf
> + - const: mphy_grf
> + - const: hci_apb
> +
> + clocks:
> + maxItems: 4
> +
> + clock-names:
> + items:
> + - const: core
> + - const: pclk
> + - const: pclk_mphy
> + - const: ref_out
> +
> + power-domains:
> + maxItems: 1
> +
> + resets:
> + maxItems: 4
> +
> + reset-names:
> + items:
> + - const: biu
> + - const: sys
> + - const: ufs
> + - const: grf
> +
> + reset-gpios:
> + maxItems: 1
> + description: |
> + GPIO specifiers for host to reset the whole UFS device including PHY and
> + memory. This gpio is active low and should choose the one whose high output
> + voltage is lower than 1.5V based on the UFS spec.
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - clocks
> + - clock-names
> + - interrupts
> + - power-domains
> + - resets
> + - reset-names
> + - reset-gpios
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/rockchip,rk3576-cru.h>
> + #include <dt-bindings/reset/rockchip,rk3576-cru.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/rockchip,rk3576-power.h>
> + #include <dt-bindings/pinctrl/rockchip.h>
> + #include <dt-bindings/gpio/gpio.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + ufs: ufs@2a2d0000 {
Could you please use 'ufshc' as the node name as documented in the devicetree
spec?
- Mani
> + compatible = "rockchip,rk3576-ufshc";
> + reg = <0x0 0x2a2d0000 0x0 0x10000>,
> + <0x0 0x2b040000 0x0 0x10000>,
> + <0x0 0x2601f000 0x0 0x1000>,
> + <0x0 0x2603c000 0x0 0x1000>,
> + <0x0 0x2a2e0000 0x0 0x10000>;
> + reg-names = "hci", "mphy", "hci_grf", "mphy_grf", "hci_apb";
> + clocks = <&cru ACLK_UFS_SYS>, <&cru PCLK_USB_ROOT>, <&cru PCLK_MPHY>,
> + <&cru CLK_REF_UFS_CLKOUT>;
> + clock-names = "core", "pclk", "pclk_mphy", "ref_out";
> + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
> + power-domains = <&power RK3576_PD_USB>;
> + resets = <&cru SRST_A_UFS_BIU>, <&cru SRST_A_UFS_SYS>, <&cru SRST_A_UFS>,
> + <&cru SRST_P_UFS_GRF>;
> + reset-names = "biu", "sys", "ufs", "grf";
> + reset-gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
> + };
> + };
> --
> 2.7.4
>
--
மணிவண்ணன் சதாசிவம்
next prev parent reply other threads:[~2024-11-07 15:42 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-04 7:31 [PATCH v4 0/7] Initial support for RK3576 UFS controller Shawn Lin
2024-11-04 7:31 ` [PATCH v4 1/7] scsi: ufs: core: Add UFSHCI_QUIRK_DME_RESET_ENABLE_AFTER_HCE Shawn Lin
2024-11-07 15:51 ` Manivannan Sadhasivam
2024-11-08 1:04 ` Shawn Lin
2024-11-04 7:31 ` [PATCH v4 2/7] dt-bindings: ufs: Document Rockchip UFS host controller Shawn Lin
2024-11-07 15:42 ` Manivannan Sadhasivam [this message]
2024-11-04 7:31 ` [PATCH v4 3/7] soc: rockchip: add header for suspend mode SIP interface Shawn Lin
2024-11-04 7:31 ` [PATCH v4 4/7] pmdomain: core: Introduce dev_pm_genpd_rpm_always_on() Shawn Lin
2024-11-04 19:04 ` kernel test robot
2024-11-04 20:17 ` kernel test robot
2024-11-08 14:19 ` Dan Carpenter
2024-11-04 7:31 ` [PATCH v4 5/7] pmdomain: rockchip: Add smc call to inform firmware Shawn Lin
2024-11-04 7:32 ` [PATCH v4 6/7] PM: wakeup: Add device_clr_wakeup_path() Shawn Lin
2024-11-04 7:32 ` [PATCH v4 7/7] scsi: ufs: rockchip: initial support for UFS Shawn Lin
2024-11-04 10:57 ` Ulf Hansson
2024-11-05 1:54 ` Shawn Lin
2024-11-09 12:12 ` Manivannan Sadhasivam
2024-11-11 1:10 ` Shawn Lin
2024-11-12 6:43 ` Manivannan Sadhasivam
2024-11-12 6:51 ` Shawn Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241107154254.bpuqspdrymyg3qsa@thinkpad \
--to=manivannan.sadhasivam@linaro.org \
--cc=James.Bottomley@HansenPartnership.com \
--cc=alim.akhtar@samsung.com \
--cc=avri.altman@wdc.com \
--cc=bvanassche@acm.org \
--cc=cl@rock-chips.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawn.lin@rock-chips.com \
--cc=ulf.hansson@linaro.org \
--cc=zyf@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox