* [PATCH v1 1/4] mpi3mr: Avoid reply queue full condition
2025-01-29 10:08 [PATCH v1 0/4] mpi3mr: Few Enhancements and minor fixes Ranjan Kumar
@ 2025-01-29 10:08 ` Ranjan Kumar
2025-01-29 10:08 ` [PATCH v1 2/4] mpi3mr: Support for Segmented Hardware Trace buffer Ranjan Kumar
` (4 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Ranjan Kumar @ 2025-01-29 10:08 UTC (permalink / raw)
To: linux-scsi, martin.petersen
Cc: rajsekhar.chundru, sathya.prakash, sumit.saxena,
chandrakanth.patil, prayas.patel, Ranjan Kumar
- Driver will check the IOCFacts capabilities for qfull.
- It will update Operational reply queue’s Consumer Index
after processing 100 replies.
- If pending IOs on a reply queue exceeds threshold
(reply_queue_depth - 200) then return IO back to OS to retry.
- Driver would increase admin reply queue size to 2K.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
---
drivers/scsi/mpi3mr/mpi3mr.h | 12 +++++++++++-
drivers/scsi/mpi3mr/mpi3mr_app.c | 24 ++++++++++++++++++++++++
drivers/scsi/mpi3mr/mpi3mr_fw.c | 32 ++++++++++++++++++++++++++++----
3 files changed, 63 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 0c3e1ac076b5..20a29474369a 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -81,13 +81,14 @@ extern atomic64_t event_counter;
/* Admin queue management definitions */
#define MPI3MR_ADMIN_REQ_Q_SIZE (2 * MPI3MR_PAGE_SIZE_4K)
-#define MPI3MR_ADMIN_REPLY_Q_SIZE (4 * MPI3MR_PAGE_SIZE_4K)
+#define MPI3MR_ADMIN_REPLY_Q_SIZE (8 * MPI3MR_PAGE_SIZE_4K)
#define MPI3MR_ADMIN_REQ_FRAME_SZ 128
#define MPI3MR_ADMIN_REPLY_FRAME_SZ 16
/* Operational queue management definitions */
#define MPI3MR_OP_REQ_Q_QD 512
#define MPI3MR_OP_REP_Q_QD 1024
+#define MPI3MR_OP_REP_Q_QD2K 2048
#define MPI3MR_OP_REP_Q_QD4K 4096
#define MPI3MR_OP_REQ_Q_SEG_SIZE 4096
#define MPI3MR_OP_REP_Q_SEG_SIZE 4096
@@ -329,6 +330,7 @@ enum mpi3mr_reset_reason {
#define MPI3MR_RESET_REASON_OSTYPE_SHIFT 28
#define MPI3MR_RESET_REASON_IOCNUM_SHIFT 20
+
/* Queue type definitions */
enum queue_type {
MPI3MR_DEFAULT_QUEUE = 0,
@@ -388,6 +390,7 @@ struct mpi3mr_ioc_facts {
u16 max_msix_vectors;
u8 personality;
u8 dma_mask;
+ bool max_req_limit;
u8 protocol_flags;
u8 sge_mod_mask;
u8 sge_mod_value;
@@ -457,6 +460,8 @@ struct op_req_qinfo {
* @enable_irq_poll: Flag to indicate polling is enabled
* @in_use: Queue is handled by poll/ISR
* @qtype: Type of queue (types defined in enum queue_type)
+ * @qfull_watermark: Watermark defined in reply queue to avoid
+ * reply queue full
*/
struct op_reply_qinfo {
u16 ci;
@@ -472,6 +477,7 @@ struct op_reply_qinfo {
bool enable_irq_poll;
atomic_t in_use;
enum queue_type qtype;
+ u16 qfull_watermark;
};
/**
@@ -1154,6 +1160,8 @@ struct scmd_priv {
* @snapdump_trigger_active: Snapdump trigger active flag
* @pci_err_recovery: PCI error recovery in progress
* @block_on_pci_err: Block IO during PCI error recovery
+ * @reply_qfull_count: Occurences of reply queue full avoidance kicking-in
+ * @prevent_reply_qfull: Enable reply queue prevention
*/
struct mpi3mr_ioc {
struct list_head list;
@@ -1352,6 +1360,8 @@ struct mpi3mr_ioc {
bool fw_release_trigger_active;
bool pci_err_recovery;
bool block_on_pci_err;
+ atomic_t reply_qfull_count;
+ bool prevent_reply_qfull;
};
/**
diff --git a/drivers/scsi/mpi3mr/mpi3mr_app.c b/drivers/scsi/mpi3mr/mpi3mr_app.c
index 7589f48aebc8..1532436f0f3a 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_app.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_app.c
@@ -3060,6 +3060,29 @@ reply_queue_count_show(struct device *dev, struct device_attribute *attr,
static DEVICE_ATTR_RO(reply_queue_count);
+/**
+ * reply_qfull_count_show - Show reply qfull count
+ * @dev: class device
+ * @attr: Device attributes
+ * @buf: Buffer to copy
+ *
+ * Retrieves the current value of the reply_qfull_count from the mrioc structure and
+ * formats it as a string for display.
+ *
+ * Return: sysfs_emit() return
+ */
+static ssize_t
+reply_qfull_count_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct mpi3mr_ioc *mrioc = shost_priv(shost);
+
+ return sysfs_emit(buf, "%u\n", atomic_read(&mrioc->reply_qfull_count));
+}
+
+static DEVICE_ATTR_RO(reply_qfull_count);
+
/**
* logging_level_show - Show controller debug level
* @dev: class device
@@ -3152,6 +3175,7 @@ static struct attribute *mpi3mr_host_attrs[] = {
&dev_attr_fw_queue_depth.attr,
&dev_attr_op_req_q_count.attr,
&dev_attr_reply_queue_count.attr,
+ &dev_attr_reply_qfull_count.attr,
&dev_attr_logging_level.attr,
&dev_attr_adp_state.attr,
NULL,
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 5ed31fe57474..84e57218a614 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -2104,15 +2104,22 @@ static int mpi3mr_create_op_reply_q(struct mpi3mr_ioc *mrioc, u16 qidx)
}
reply_qid = qidx + 1;
- op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD;
- if ((mrioc->pdev->device == MPI3_MFGPAGE_DEVID_SAS4116) &&
- !mrioc->pdev->revision)
- op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD4K;
+
+ if (mrioc->pdev->device == MPI3_MFGPAGE_DEVID_SAS4116) {
+ if (mrioc->pdev->revision)
+ op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD;
+ else
+ op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD4K;
+ } else
+ op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD2K;
+
op_reply_q->ci = 0;
op_reply_q->ephase = 1;
atomic_set(&op_reply_q->pend_ios, 0);
atomic_set(&op_reply_q->in_use, 0);
op_reply_q->enable_irq_poll = false;
+ op_reply_q->qfull_watermark =
+ op_reply_q->num_replies - (MPI3MR_THRESHOLD_REPLY_COUNT * 2);
if (!op_reply_q->q_segments) {
retval = mpi3mr_alloc_op_reply_q_segments(mrioc, qidx);
@@ -2416,8 +2423,10 @@ int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc,
void *segment_base_addr;
u16 req_sz = mrioc->facts.op_req_sz;
struct segments *segments = op_req_q->q_segments;
+ struct op_reply_qinfo *op_reply_q = NULL;
reply_qidx = op_req_q->reply_qid - 1;
+ op_reply_q = mrioc->op_reply_qinfo + reply_qidx;
if (mrioc->unrecoverable)
return -EFAULT;
@@ -2448,6 +2457,15 @@ int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc,
goto out;
}
+ /* Reply queue is nearing to get full, pushback IOs to SML*/
+ if ((mrioc->prevent_reply_qfull == true) &&
+ (atomic_read(&op_reply_q->pend_ios) >
+ (op_reply_q->qfull_watermark))) {
+ atomic_inc(&mrioc->reply_qfull_count);
+ retval = -EAGAIN;
+ goto out;
+ }
+
segment_base_addr = segments[pi / op_req_q->segment_qd].segment;
req_entry = (u8 *)segment_base_addr +
((pi % op_req_q->segment_qd) * req_sz);
@@ -3091,6 +3109,9 @@ static void mpi3mr_process_factsdata(struct mpi3mr_ioc *mrioc,
mrioc->facts.dma_mask = (facts_flags &
MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_MASK) >>
MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_SHIFT;
+ mrioc->facts.dma_mask = (facts_flags &
+ MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_MASK) >>
+ MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_SHIFT;
mrioc->facts.protocol_flags = facts_data->protocol_flags;
mrioc->facts.mpi_version = le32_to_cpu(facts_data->mpi_version.word);
mrioc->facts.max_reqs = le16_to_cpu(facts_data->max_outstanding_requests);
@@ -4214,6 +4235,9 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
mrioc->shost->transportt = mpi3mr_transport_template;
}
+ if (mrioc->facts.max_req_limit)
+ mrioc->prevent_reply_qfull = true;
+
mrioc->reply_sz = mrioc->facts.reply_sz;
retval = mpi3mr_check_reset_dma_mask(mrioc);
--
2.31.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v1 2/4] mpi3mr: Support for Segmented Hardware Trace buffer
2025-01-29 10:08 [PATCH v1 0/4] mpi3mr: Few Enhancements and minor fixes Ranjan Kumar
2025-01-29 10:08 ` [PATCH v1 1/4] mpi3mr: Avoid reply queue full condition Ranjan Kumar
@ 2025-01-29 10:08 ` Ranjan Kumar
2025-01-29 10:08 ` [PATCH v1 3/4] mpi3mr: synchronous access b/w reset and tm thread for reply queue Ranjan Kumar
` (3 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Ranjan Kumar @ 2025-01-29 10:08 UTC (permalink / raw)
To: linux-scsi, martin.petersen
Cc: rajsekhar.chundru, sathya.prakash, sumit.saxena,
chandrakanth.patil, prayas.patel, Ranjan Kumar
- Driver will allocate Segmented trace buffer, if firmware
advertises the capability in IOC facts.
- Upon driver load, driver will read the trace buffer size
from driver page 1, calculate the required segments for
trace buffer and allocate Segmented buffers.
Each segmented is of 4096 bytes size.
- While posting driver diagnostic buffer to firmware,
driver advertises that trace buffer is Segmented.
- Driver will de-allocate Segmented buffers during driver unload.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
---
drivers/scsi/mpi3mr/mpi/mpi30_tool.h | 1 +
drivers/scsi/mpi3mr/mpi3mr.h | 13 ++++
drivers/scsi/mpi3mr/mpi3mr_app.c | 104 ++++++++++++++++++++++++---
drivers/scsi/mpi3mr/mpi3mr_fw.c | 45 ++++++++++--
4 files changed, 150 insertions(+), 13 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_tool.h b/drivers/scsi/mpi3mr/mpi/mpi30_tool.h
index 3b960893870f..50a65b16a818 100644
--- a/drivers/scsi/mpi3mr/mpi/mpi30_tool.h
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_tool.h
@@ -9,6 +9,7 @@
#define MPI3_DIAG_BUFFER_TYPE_FW (0x02)
#define MPI3_DIAG_BUFFER_ACTION_RELEASE (0x01)
+#define MPI3_DIAG_BUFFER_POST_MSGFLAGS_SEGMENTED (0x01)
struct mpi3_diag_buffer_post_request {
__le16 host_tag;
u8 ioc_use_only02;
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 20a29474369a..98db83e1cd12 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -935,6 +935,8 @@ struct trigger_event_data {
* @size: Buffer size
* @addr: Virtual address
* @dma_addr: Buffer DMA address
+ * @is_segmented: The buffer is segmented or not
+ * @disabled_after_reset: The buffer is disabled after reset
*/
struct diag_buffer_desc {
u8 type;
@@ -944,6 +946,8 @@ struct diag_buffer_desc {
u32 size;
void *addr;
dma_addr_t dma_addr;
+ bool is_segmented;
+ bool disabled_after_reset;
};
/**
@@ -1162,6 +1166,10 @@ struct scmd_priv {
* @block_on_pci_err: Block IO during PCI error recovery
* @reply_qfull_count: Occurences of reply queue full avoidance kicking-in
* @prevent_reply_qfull: Enable reply queue prevention
+ * @seg_tb_support: Segmented trace buffer support
+ * @num_tb_segs: Number of Segments in Trace buffer
+ * @trace_buf_pool: DMA pool for Segmented trace buffer segments
+ * @trace_buf: Trace buffer segments memory descriptor
*/
struct mpi3mr_ioc {
struct list_head list;
@@ -1362,6 +1370,11 @@ struct mpi3mr_ioc {
bool block_on_pci_err;
atomic_t reply_qfull_count;
bool prevent_reply_qfull;
+ bool seg_tb_support;
+ u32 num_tb_segs;
+ struct dma_pool *trace_buf_pool;
+ struct segments *trace_buf;
+
};
/**
diff --git a/drivers/scsi/mpi3mr/mpi3mr_app.c b/drivers/scsi/mpi3mr/mpi3mr_app.c
index 1532436f0f3a..26582776749f 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_app.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_app.c
@@ -12,23 +12,98 @@
#include <uapi/scsi/scsi_bsg_mpi3mr.h>
/**
- * mpi3mr_alloc_trace_buffer: Allocate trace buffer
+ * mpi3mr_alloc_trace_buffer: Allocate segmented trace buffer
* @mrioc: Adapter instance reference
* @trace_size: Trace buffer size
*
- * Allocate trace buffer
+ * Allocate either segmented memory pools or contiguous buffer
+ * based on the controller capability for the host trace
+ * buffer.
+ *
* Return: 0 on success, non-zero on failure.
*/
static int mpi3mr_alloc_trace_buffer(struct mpi3mr_ioc *mrioc, u32 trace_size)
{
struct diag_buffer_desc *diag_buffer = &mrioc->diag_buffers[0];
+ int i, sz;
+ u64 *diag_buffer_list = NULL;
+ dma_addr_t diag_buffer_list_dma;
+ u32 seg_count;
+
+ if (mrioc->seg_tb_support) {
+ seg_count = (trace_size) / MPI3MR_PAGE_SIZE_4K;
+ trace_size = seg_count * MPI3MR_PAGE_SIZE_4K;
+
+ diag_buffer_list = dma_alloc_coherent(&mrioc->pdev->dev,
+ sizeof(u64) * seg_count,
+ &diag_buffer_list_dma, GFP_KERNEL);
+ if (!diag_buffer_list)
+ return -1;
+
+ mrioc->num_tb_segs = seg_count;
+
+ sz = sizeof(struct segments) * seg_count;
+ mrioc->trace_buf = kzalloc(sz, GFP_KERNEL);
+ if (!mrioc->trace_buf)
+ goto trace_buf_failed;
+
+ mrioc->trace_buf_pool = dma_pool_create("trace_buf pool",
+ &mrioc->pdev->dev, MPI3MR_PAGE_SIZE_4K, MPI3MR_PAGE_SIZE_4K,
+ 0);
+ if (!mrioc->trace_buf_pool) {
+ ioc_err(mrioc, "trace buf pool: dma_pool_create failed\n");
+ goto trace_buf_pool_failed;
+ }
- diag_buffer->addr = dma_alloc_coherent(&mrioc->pdev->dev,
- trace_size, &diag_buffer->dma_addr, GFP_KERNEL);
- if (diag_buffer->addr) {
- dprint_init(mrioc, "trace diag buffer is allocated successfully\n");
+ for (i = 0; i < seg_count; i++) {
+ mrioc->trace_buf[i].segment =
+ dma_pool_zalloc(mrioc->trace_buf_pool, GFP_KERNEL,
+ &mrioc->trace_buf[i].segment_dma);
+ diag_buffer_list[i] =
+ (u64) mrioc->trace_buf[i].segment_dma;
+ if (!diag_buffer_list[i])
+ goto tb_seg_alloc_failed;
+ }
+
+ diag_buffer->addr = diag_buffer_list;
+ diag_buffer->dma_addr = diag_buffer_list_dma;
+ diag_buffer->is_segmented = true;
+
+ dprint_init(mrioc, "segmented trace diag buffer\n"
+ "is allocated successfully seg_count:%d\n", seg_count);
return 0;
+ } else {
+ diag_buffer->addr = dma_alloc_coherent(&mrioc->pdev->dev,
+ trace_size, &diag_buffer->dma_addr, GFP_KERNEL);
+ if (diag_buffer->addr) {
+ dprint_init(mrioc, "trace diag buffer is allocated successfully\n");
+ return 0;
+ }
+ return -1;
}
+
+tb_seg_alloc_failed:
+ if (mrioc->trace_buf_pool) {
+ for (i = 0; i < mrioc->num_tb_segs; i++) {
+ if (mrioc->trace_buf[i].segment) {
+ dma_pool_free(mrioc->trace_buf_pool,
+ mrioc->trace_buf[i].segment,
+ mrioc->trace_buf[i].segment_dma);
+ mrioc->trace_buf[i].segment = NULL;
+ }
+ mrioc->trace_buf[i].segment = NULL;
+ }
+ dma_pool_destroy(mrioc->trace_buf_pool);
+ mrioc->trace_buf_pool = NULL;
+ }
+trace_buf_pool_failed:
+ kfree(mrioc->trace_buf);
+ mrioc->trace_buf = NULL;
+trace_buf_failed:
+ if (diag_buffer_list)
+ dma_free_coherent(&mrioc->pdev->dev,
+ sizeof(u64) * mrioc->num_tb_segs,
+ diag_buffer_list, diag_buffer_list_dma);
return -1;
}
@@ -100,8 +175,9 @@ void mpi3mr_alloc_diag_bufs(struct mpi3mr_ioc *mrioc)
dprint_init(mrioc,
"trying to allocate trace diag buffer of size = %dKB\n",
trace_size / 1024);
- if (get_order(trace_size) > MAX_PAGE_ORDER ||
+ if ((!mrioc->seg_tb_support && (get_order(trace_size) > MAX_PAGE_ORDER)) ||
mpi3mr_alloc_trace_buffer(mrioc, trace_size)) {
+
retry = true;
trace_size -= trace_dec_size;
dprint_init(mrioc, "trace diag buffer allocation failed\n"
@@ -161,6 +237,12 @@ int mpi3mr_issue_diag_buf_post(struct mpi3mr_ioc *mrioc,
u8 prev_status;
int retval = 0;
+ if (diag_buffer->disabled_after_reset) {
+ dprint_bsg_err(mrioc, "%s: skiping diag buffer posting\n"
+ "as it is disabled after reset\n", __func__);
+ return -1;
+ }
+
memset(&diag_buf_post_req, 0, sizeof(diag_buf_post_req));
mutex_lock(&mrioc->init_cmds.mutex);
if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
@@ -177,8 +259,12 @@ int mpi3mr_issue_diag_buf_post(struct mpi3mr_ioc *mrioc,
diag_buf_post_req.address = le64_to_cpu(diag_buffer->dma_addr);
diag_buf_post_req.length = le32_to_cpu(diag_buffer->size);
- dprint_bsg_info(mrioc, "%s: posting diag buffer type %d\n", __func__,
- diag_buffer->type);
+ if (diag_buffer->is_segmented)
+ diag_buf_post_req.msg_flags |= MPI3_DIAG_BUFFER_POST_MSGFLAGS_SEGMENTED;
+
+ dprint_bsg_info(mrioc, "%s: posting diag buffer type %d segmented:%d\n", __func__,
+ diag_buffer->type, diag_buffer->is_segmented);
+
prev_status = diag_buffer->status;
diag_buffer->status = MPI3MR_HDB_BUFSTATUS_POSTED_UNPAUSED;
init_completion(&mrioc->init_cmds.done);
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 84e57218a614..106f806b2c3d 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -1302,7 +1302,7 @@ static int mpi3mr_issue_and_process_mur(struct mpi3mr_ioc *mrioc,
(ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC)))
retval = 0;
- ioc_info(mrioc, "Base IOC Sts/Config after %s MUR is (0x%x)/(0x%x)\n",
+ ioc_info(mrioc, "Base IOC Sts/Config after %s MUR is (0x%08x)/(0x%08x)\n",
(!retval) ? "successful" : "failed", ioc_status, ioc_config);
return retval;
}
@@ -1355,6 +1355,19 @@ mpi3mr_revalidate_factsdata(struct mpi3mr_ioc *mrioc)
"\tcontroller while sas transport support is enabled at the\n"
"\tdriver, please reboot the system or reload the driver\n");
+ if (mrioc->seg_tb_support) {
+ if (!(mrioc->facts.ioc_capabilities &
+ MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_TRACE_SUPPORTED)) {
+ ioc_err(mrioc,
+ "critical error: previously enabled segmented trace\n"
+ " buffer capability is disabled after reset. Please\n"
+ " update the firmware or reboot the system or\n"
+ " reload the driver to enable trace diag buffer\n");
+ mrioc->diag_buffers[0].disabled_after_reset = true;
+ } else
+ mrioc->diag_buffers[0].disabled_after_reset = false;
+ }
+
if (mrioc->facts.max_devhandle > mrioc->dev_handle_bitmap_bits) {
removepend_bitmap = bitmap_zalloc(mrioc->facts.max_devhandle,
GFP_KERNEL);
@@ -1717,7 +1730,7 @@ static int mpi3mr_issue_reset(struct mpi3mr_ioc *mrioc, u16 reset_type,
ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
ioc_status = readl(&mrioc->sysif_regs->ioc_status);
ioc_info(mrioc,
- "ioc_status/ioc_onfig after %s reset is (0x%x)/(0x%x)\n",
+ "ioc_status/ioc_config after %s reset is (0x%08x)/(0x%08x)\n",
(!retval)?"successful":"failed", ioc_status,
ioc_config);
if (retval)
@@ -4238,6 +4251,10 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
if (mrioc->facts.max_req_limit)
mrioc->prevent_reply_qfull = true;
+ if (mrioc->facts.ioc_capabilities &
+ MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_TRACE_SUPPORTED)
+ mrioc->seg_tb_support = true;
+
mrioc->reply_sz = mrioc->facts.reply_sz;
retval = mpi3mr_check_reset_dma_mask(mrioc);
@@ -4695,7 +4712,7 @@ void mpi3mr_memset_buffers(struct mpi3mr_ioc *mrioc)
*/
void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc)
{
- u16 i;
+ u16 i, j;
struct mpi3mr_intr_info *intr_info;
struct diag_buffer_desc *diag_buffer;
@@ -4830,6 +4847,26 @@ void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc)
for (i = 0; i < MPI3MR_MAX_NUM_HDB; i++) {
diag_buffer = &mrioc->diag_buffers[i];
+ if ((i == 0) && mrioc->seg_tb_support) {
+ if (mrioc->trace_buf_pool) {
+ for (j = 0; j < mrioc->num_tb_segs; j++) {
+ if (mrioc->trace_buf[j].segment) {
+ dma_pool_free(mrioc->trace_buf_pool,
+ mrioc->trace_buf[j].segment,
+ mrioc->trace_buf[j].segment_dma);
+ mrioc->trace_buf[j].segment = NULL;
+ }
+
+ mrioc->trace_buf[j].segment = NULL;
+ }
+ dma_pool_destroy(mrioc->trace_buf_pool);
+ mrioc->trace_buf_pool = NULL;
+ }
+
+ kfree(mrioc->trace_buf);
+ mrioc->trace_buf = NULL;
+ diag_buffer->size = sizeof(u64) * mrioc->num_tb_segs;
+ }
if (diag_buffer->addr) {
dma_free_coherent(&mrioc->pdev->dev,
diag_buffer->size, diag_buffer->addr,
@@ -4907,7 +4944,7 @@ static void mpi3mr_issue_ioc_shutdown(struct mpi3mr_ioc *mrioc)
}
ioc_info(mrioc,
- "Base IOC Sts/Config after %s shutdown is (0x%x)/(0x%x)\n",
+ "Base IOC Sts/Config after %s shutdown is (0x%08x)/(0x%08x)\n",
(!retval) ? "successful" : "failed", ioc_status,
ioc_config);
}
--
2.31.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v1 3/4] mpi3mr: synchronous access b/w reset and tm thread for reply queue
2025-01-29 10:08 [PATCH v1 0/4] mpi3mr: Few Enhancements and minor fixes Ranjan Kumar
2025-01-29 10:08 ` [PATCH v1 1/4] mpi3mr: Avoid reply queue full condition Ranjan Kumar
2025-01-29 10:08 ` [PATCH v1 2/4] mpi3mr: Support for Segmented Hardware Trace buffer Ranjan Kumar
@ 2025-01-29 10:08 ` Ranjan Kumar
2025-01-29 10:08 ` [PATCH v1 4/4] mpi3mr: Update driver version to 8.12.1.0.50 Ranjan Kumar
` (2 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Ranjan Kumar @ 2025-01-29 10:08 UTC (permalink / raw)
To: linux-scsi, martin.petersen
Cc: rajsekhar.chundru, sathya.prakash, sumit.saxena,
chandrakanth.patil, prayas.patel, Ranjan Kumar
when the task management thread processes reply queues
while the reset thread resets them. The task management thread accesses
an invalid queue ID (0xFFFF), set by the reset thread, which points to
unallocated memory, causing a crash.
Flag "io_admin_reset_sync" is added to synchronize access
between the reset, IO, and admin threads. Before a reset, the
reset handler sets this flag to block IO and admin processing
threads. If any thread bypasses the initial check, the reset thread
waits up to 10 seconds for processing to finish. If the wait exceeds
10 seconds, the controller is marked as unrecoverable.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
---
drivers/scsi/mpi3mr/mpi3mr.h | 2 +
drivers/scsi/mpi3mr/mpi3mr_fw.c | 67 +++++++++++++++++++++++++++++++--
2 files changed, 66 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 98db83e1cd12..8978c201c6f0 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -1101,6 +1101,7 @@ struct scmd_priv {
* @ts_update_interval: Timestamp update interval
* @reset_in_progress: Reset in progress flag
* @unrecoverable: Controller unrecoverable flag
+ * @io_admin_reset_sync: Manage state of I/O ops during an admin reset process
* @prev_reset_result: Result of previous reset
* @reset_mutex: Controller reset mutex
* @reset_waitq: Controller reset wait queue
@@ -1293,6 +1294,7 @@ struct mpi3mr_ioc {
u16 ts_update_interval;
u8 reset_in_progress;
u8 unrecoverable;
+ u8 io_admin_reset_sync;
int prev_reset_result;
struct mutex reset_mutex;
wait_queue_head_t reset_waitq;
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 106f806b2c3d..08277ac992a6 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -17,7 +17,7 @@ static void mpi3mr_process_factsdata(struct mpi3mr_ioc *mrioc,
struct mpi3_ioc_facts_data *facts_data);
static void mpi3mr_pel_wait_complete(struct mpi3mr_ioc *mrioc,
struct mpi3mr_drv_cmd *drv_cmd);
-
+static int mpi3mr_check_op_admin_proc(struct mpi3mr_ioc *mrioc);
static int poll_queues;
module_param(poll_queues, int, 0444);
MODULE_PARM_DESC(poll_queues, "Number of queues for io_uring poll mode. (Range 1 - 126)");
@@ -459,7 +459,7 @@ int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc)
}
do {
- if (mrioc->unrecoverable)
+ if (mrioc->unrecoverable || mrioc->io_admin_reset_sync)
break;
mrioc->admin_req_ci = le16_to_cpu(reply_desc->request_queue_ci);
@@ -554,7 +554,7 @@ int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc,
}
do {
- if (mrioc->unrecoverable)
+ if (mrioc->unrecoverable || mrioc->io_admin_reset_sync)
break;
req_q_idx = le16_to_cpu(reply_desc->request_queue_id) - 1;
@@ -4411,6 +4411,7 @@ int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume)
goto out_failed_noretry;
}
+ mrioc->io_admin_reset_sync = 0;
if (is_resume || mrioc->block_on_pci_err) {
dprint_reset(mrioc, "setting up single ISR\n");
retval = mpi3mr_setup_isr(mrioc, 1);
@@ -5289,6 +5290,55 @@ void mpi3mr_pel_get_seqnum_complete(struct mpi3mr_ioc *mrioc,
drv_cmd->retry_count = 0;
}
+/**
+ * mpi3mr_check_op_admin_proc -
+ * @mrioc: Adapter instance reference
+ *
+ * It checks if any of the operation reply queues
+ * or the admin reply queue are currently in use.
+ * If any queue is in use, the function waits for
+ * a maximum of 10 seconds for them to become available.
+ *
+ * Return: 0 on success, non-zero on failure.
+ */
+static int mpi3mr_check_op_admin_proc(struct mpi3mr_ioc *mrioc)
+{
+
+ u16 timeout = 10 * 10;
+ u16 elapsed_time = 0;
+ bool op_admin_in_use = false;
+
+ do {
+ op_admin_in_use = false;
+
+ /* Check admin_reply queue first to exit early */
+ if (atomic_read(&mrioc->admin_reply_q_in_use) == 1)
+ op_admin_in_use = true;
+ else {
+ /* Check op_reply queues */
+ int i;
+
+ for (i = 0; i < mrioc->num_queues; i++) {
+ if (atomic_read(&mrioc->op_reply_qinfo[i].in_use) == 1) {
+ op_admin_in_use = true;
+ break;
+ }
+ }
+ }
+
+ if (!op_admin_in_use)
+ break;
+
+ msleep(100);
+
+ } while (++elapsed_time < timeout);
+
+ if (op_admin_in_use)
+ return 1;
+
+ return 0;
+}
+
/**
* mpi3mr_soft_reset_handler - Reset the controller
* @mrioc: Adapter instance reference
@@ -5369,6 +5419,7 @@ int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
mpi3mr_wait_for_host_io(mrioc, MPI3MR_RESET_HOST_IOWAIT_TIMEOUT);
mpi3mr_ioc_disable_intr(mrioc);
+ mrioc->io_admin_reset_sync = 1;
if (snapdump) {
mpi3mr_set_diagsave(mrioc);
@@ -5396,6 +5447,16 @@ int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
ioc_err(mrioc, "Failed to issue soft reset to the ioc\n");
goto out;
}
+
+ retval = mpi3mr_check_op_admin_proc(mrioc);
+ if (retval) {
+ ioc_err(mrioc, "soft reset is failed due to an Admin or I/O queue polling\n"
+ "thread was still processing replies even after 10 seconds\n"
+ "timeout, marking the controller as unrecoverable\n");
+
+ goto out;
+ }
+
if (mrioc->num_io_throttle_group !=
mrioc->facts.max_io_throttle_group) {
ioc_err(mrioc,
--
2.31.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v1 4/4] mpi3mr: Update driver version to 8.12.1.0.50
2025-01-29 10:08 [PATCH v1 0/4] mpi3mr: Few Enhancements and minor fixes Ranjan Kumar
` (2 preceding siblings ...)
2025-01-29 10:08 ` [PATCH v1 3/4] mpi3mr: synchronous access b/w reset and tm thread for reply queue Ranjan Kumar
@ 2025-01-29 10:08 ` Ranjan Kumar
2025-02-04 2:48 ` [PATCH v1 0/4] mpi3mr: Few Enhancements and minor fixes Martin K. Petersen
2025-02-10 2:58 ` Martin K. Petersen
5 siblings, 0 replies; 10+ messages in thread
From: Ranjan Kumar @ 2025-01-29 10:08 UTC (permalink / raw)
To: linux-scsi, martin.petersen
Cc: rajsekhar.chundru, sathya.prakash, sumit.saxena,
chandrakanth.patil, prayas.patel, Ranjan Kumar
Update driver version to 8.12.1.0.50
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
---
drivers/scsi/mpi3mr/mpi3mr.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 8978c201c6f0..b6e15b531596 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -57,8 +57,8 @@ extern struct list_head mrioc_list;
extern int prot_mask;
extern atomic64_t event_counter;
-#define MPI3MR_DRIVER_VERSION "8.12.0.3.50"
-#define MPI3MR_DRIVER_RELDATE "11-November-2024"
+#define MPI3MR_DRIVER_VERSION "8.12.1.0.50"
+#define MPI3MR_DRIVER_RELDATE "28-January-2025"
#define MPI3MR_DRIVER_NAME "mpi3mr"
#define MPI3MR_DRIVER_LICENSE "GPL"
--
2.31.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v1 0/4] mpi3mr: Few Enhancements and minor fixes
2025-01-29 10:08 [PATCH v1 0/4] mpi3mr: Few Enhancements and minor fixes Ranjan Kumar
` (3 preceding siblings ...)
2025-01-29 10:08 ` [PATCH v1 4/4] mpi3mr: Update driver version to 8.12.1.0.50 Ranjan Kumar
@ 2025-02-04 2:48 ` Martin K. Petersen
2025-02-10 2:58 ` Martin K. Petersen
5 siblings, 0 replies; 10+ messages in thread
From: Martin K. Petersen @ 2025-02-04 2:48 UTC (permalink / raw)
To: Ranjan Kumar
Cc: linux-scsi, martin.petersen, rajsekhar.chundru, sathya.prakash,
sumit.saxena, chandrakanth.patil, prayas.patel
Ranjan,
> Few Enhancements and minor fixes of mpi3mr driver.
Applied to 6.15/scsi-staging, thanks!
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH v1 0/4] mpi3mr: Few Enhancements and minor fixes
2025-01-29 10:08 [PATCH v1 0/4] mpi3mr: Few Enhancements and minor fixes Ranjan Kumar
` (4 preceding siblings ...)
2025-02-04 2:48 ` [PATCH v1 0/4] mpi3mr: Few Enhancements and minor fixes Martin K. Petersen
@ 2025-02-10 2:58 ` Martin K. Petersen
5 siblings, 0 replies; 10+ messages in thread
From: Martin K. Petersen @ 2025-02-10 2:58 UTC (permalink / raw)
To: linux-scsi, Ranjan Kumar
Cc: Martin K . Petersen, rajsekhar.chundru, sathya.prakash,
sumit.saxena, chandrakanth.patil, prayas.patel
On Wed, 29 Jan 2025 15:38:46 +0530, Ranjan Kumar wrote:
> Few Enhancements and minor fixes of mpi3mr driver.
>
> Ranjan Kumar (4):
> mpi3mr: Avoid reply queue full condition
> mpi3mr: Support for Segmented Hardware Trace buffer
> mpi3mr: synchronous access b/w reset and tm thread for reply queue
> mpi3mr: Update driver version to 8.12.1.0.50
>
> [...]
Applied to 6.15/scsi-queue, thanks!
[1/4] mpi3mr: Avoid reply queue full condition
https://git.kernel.org/mkp/scsi/c/f08b24d82749
[2/4] mpi3mr: Support for Segmented Hardware Trace buffer
https://git.kernel.org/mkp/scsi/c/339a7b32a371
[3/4] mpi3mr: synchronous access b/w reset and tm thread for reply queue
https://git.kernel.org/mkp/scsi/c/f195fc060c73
[4/4] mpi3mr: Update driver version to 8.12.1.0.50
https://git.kernel.org/mkp/scsi/c/35a0437d9f33
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 10+ messages in thread