From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>,
Peter Wang <peter.wang@mediatek.com>,
Avri Altman <avri.altman@sandisk.com>,
Bean Huo <beanhuo@micron.com>
Subject: [PATCH v4 15/29] ufs: core: Rework ufshcd_mcq_compl_pending_transfer()
Date: Fri, 12 Sep 2025 11:21:36 -0700 [thread overview]
Message-ID: <20250912182340.3487688-16-bvanassche@acm.org> (raw)
In-Reply-To: <20250912182340.3487688-1-bvanassche@acm.org>
Replace a tag loop with blk_mq_tagset_busy_iter(). This patch prepares
for removing the hba->lrb[] array.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/ufs/core/ufshcd.c | 80 ++++++++++++++++++++++-----------------
1 file changed, 46 insertions(+), 34 deletions(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 23c2e94bfd89..876c4de86b26 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -5714,6 +5714,48 @@ static int ufshcd_poll(struct Scsi_Host *shost, unsigned int queue_num)
return completed_reqs != 0;
}
+static bool ufshcd_mcq_force_compl_one(struct request *rq, void *priv)
+{
+ struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
+ struct scsi_device *sdev = rq->q->queuedata;
+ struct Scsi_Host *shost = sdev->host;
+ struct ufs_hba *hba = shost_priv(shost);
+ struct ufshcd_lrb *lrbp = &hba->lrb[rq->tag];
+ struct ufs_hw_queue *hwq = ufshcd_mcq_req_to_hwq(hba, rq);
+
+ if (!hwq)
+ return true;
+
+ ufshcd_mcq_compl_all_cqes_lock(hba, hwq);
+
+ /*
+ * For those cmds of which the cqes are not present in the cq, complete
+ * them explicitly.
+ */
+ scoped_guard(spinlock_irqsave, &hwq->cq_lock) {
+ if (cmd && !test_bit(SCMD_STATE_COMPLETE, &cmd->state)) {
+ set_host_byte(cmd, DID_REQUEUE);
+ ufshcd_release_scsi_cmd(hba, lrbp);
+ scsi_done(cmd);
+ }
+ }
+
+ return true;
+}
+
+static bool ufshcd_mcq_compl_one(struct request *rq, void *priv)
+{
+ struct scsi_device *sdev = rq->q->queuedata;
+ struct Scsi_Host *shost = sdev->host;
+ struct ufs_hba *hba = shost_priv(shost);
+ struct ufs_hw_queue *hwq = ufshcd_mcq_req_to_hwq(hba, rq);
+
+ if (hwq)
+ ufshcd_mcq_poll_cqe_lock(hba, hwq);
+
+ return true;
+}
+
/**
* ufshcd_mcq_compl_pending_transfer - MCQ mode function. It is
* invoked from the error handler context or ufshcd_host_reset_and_restore()
@@ -5728,40 +5770,10 @@ static int ufshcd_poll(struct Scsi_Host *shost, unsigned int queue_num)
static void ufshcd_mcq_compl_pending_transfer(struct ufs_hba *hba,
bool force_compl)
{
- struct ufs_hw_queue *hwq;
- struct ufshcd_lrb *lrbp;
- struct scsi_cmnd *cmd;
- unsigned long flags;
- int tag;
-
- for (tag = 0; tag < hba->nutrs; tag++) {
- lrbp = &hba->lrb[tag];
- cmd = lrbp->cmd;
- if (!ufshcd_cmd_inflight(cmd) ||
- test_bit(SCMD_STATE_COMPLETE, &cmd->state))
- continue;
-
- hwq = ufshcd_mcq_req_to_hwq(hba, scsi_cmd_to_rq(cmd));
- if (!hwq)
- continue;
-
- if (force_compl) {
- ufshcd_mcq_compl_all_cqes_lock(hba, hwq);
- /*
- * For those cmds of which the cqes are not present
- * in the cq, complete them explicitly.
- */
- spin_lock_irqsave(&hwq->cq_lock, flags);
- if (cmd && !test_bit(SCMD_STATE_COMPLETE, &cmd->state)) {
- set_host_byte(cmd, DID_REQUEUE);
- ufshcd_release_scsi_cmd(hba, lrbp);
- scsi_done(cmd);
- }
- spin_unlock_irqrestore(&hwq->cq_lock, flags);
- } else {
- ufshcd_mcq_poll_cqe_lock(hba, hwq);
- }
- }
+ blk_mq_tagset_busy_iter(&hba->host->tag_set,
+ force_compl ? ufshcd_mcq_force_compl_one :
+ ufshcd_mcq_compl_one,
+ NULL);
}
/**
next prev parent reply other threads:[~2025-09-12 18:26 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-12 18:21 [PATCH v4 00/29] Optimize the hot path in the UFS driver Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 01/29] scsi: core: Support allocating reserved commands Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 02/29] scsi: core: Move two statements Bart Van Assche
2025-09-16 8:03 ` John Garry
2025-09-16 8:28 ` Hannes Reinecke
2025-09-12 18:21 ` [PATCH v4 03/29] scsi: core: Make the budget map optional Bart Van Assche
2025-09-16 8:34 ` Hannes Reinecke
2025-09-16 15:45 ` Bart Van Assche
2025-09-16 20:38 ` Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 04/29] scsi: core: Support allocating a pseudo SCSI device Bart Van Assche
2025-09-16 8:21 ` John Garry
2025-09-16 8:44 ` Hannes Reinecke
2025-09-16 9:21 ` John Garry
2025-09-12 18:21 ` [PATCH v4 05/29] scsi: core: Introduce .queue_reserved_command() Bart Van Assche
2025-09-16 9:33 ` John Garry
2025-09-12 18:21 ` [PATCH v4 06/29] scsi: core: Extend the scsi_execute_cmd() functionality Bart Van Assche
2025-09-12 20:03 ` michael.christie
2025-09-12 20:14 ` Bart Van Assche
2025-09-16 9:09 ` John Garry
2025-09-16 15:44 ` Bart Van Assche
2025-09-17 13:08 ` John Garry
2025-09-17 18:21 ` Bart Van Assche
2025-09-17 23:42 ` Bart Van Assche
2025-09-18 8:01 ` John Garry
2025-09-18 19:49 ` Bart Van Assche
2025-09-19 7:45 ` John Garry
2025-09-12 18:21 ` [PATCH v4 07/29] scsi_debug: Allocate a pseudo SCSI device Bart Van Assche
2025-09-17 12:09 ` John Garry
2025-09-17 21:37 ` Bart Van Assche
2025-09-18 7:30 ` John Garry
2025-09-12 18:21 ` [PATCH v4 08/29] ufs: core: Move an assignment in ufshcd_mcq_process_cqe() Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 09/29] ufs: core: Change the type of one ufshcd_add_cmd_upiu_trace() argument Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 10/29] ufs: core: Only call ufshcd_add_command_trace() for SCSI commands Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 11/29] ufs: core: Change the type of one ufshcd_add_command_trace() argument Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 12/29] ufs: core: Change the type of one ufshcd_send_command() argument Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 13/29] ufs: core: Only call ufshcd_should_inform_monitor() for SCSI commands Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 14/29] ufs: core: Change the monitor function argument types Bart Van Assche
2025-09-12 18:21 ` Bart Van Assche [this message]
2025-09-12 18:21 ` [PATCH v4 16/29] ufs: core: Rework ufshcd_eh_device_reset_handler() Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 17/29] ufs: core: Rework the SCSI host queue depth calculation code Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 18/29] ufs: core: Allocate the SCSI host earlier Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 19/29] ufs: core: Call ufshcd_init_lrb() later Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 20/29] ufs: core: Use hba->reserved_slot Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 21/29] ufs: core: Make the reserved slot a reserved request Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 22/29] ufs: core: Do not clear driver-private command data Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 23/29] ufs: core: Optimize the hot path Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 24/29] ufs: core: Pass a SCSI pointer instead of an LRB pointer Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 25/29] ufs: core: Remove the ufshcd_lrb task_tag member Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 26/29] ufs: core: Make blk_mq_tagset_busy_iter() skip reserved requests Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 27/29] ufs: core: Move code out of ufshcd_wait_for_dev_cmd() Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 28/29] ufs: core: Rework the ufshcd_issue_dev_cmd() callers Bart Van Assche
2025-09-12 18:21 ` [PATCH v4 29/29] ufs: core: Switch to scsi_execute_cmd() Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250912182340.3487688-16-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=James.Bottomley@HansenPartnership.com \
--cc=avri.altman@sandisk.com \
--cc=beanhuo@micron.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=peter.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox