From: Ram Kumar Dwivedi <ram.dwivedi@oss.qualcomm.com>
To: mani@kernel.org, alim.akhtar@samsung.com, avri.altman@wdc.com,
bvanassche@acm.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, James.Bottomley@HansenPartnership.com,
martin.petersen@oracle.com, ram.dwivedi@oss.qualcomm.com
Cc: linux-arm-msm@vger.kernel.org, linux-scsi@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Anjana Hari <anjana.hari@oss.qualcomm.com>
Subject: [PATCH V4 2/4] dt-bindings: ufs: Document bindings for SA8255P UFS Host Controller
Date: Tue, 6 Jan 2026 19:10:06 +0530 [thread overview]
Message-ID: <20260106134008.1969090-3-ram.dwivedi@oss.qualcomm.com> (raw)
In-Reply-To: <20260106134008.1969090-1-ram.dwivedi@oss.qualcomm.com>
Document the device tree bindings for UFS host controller on
Qualcomm SA8255P platform which integrates firmware-managed
resources.
The platform firmware implements the SCMI server and manages
resources such as the PHY, clocks, regulators and resets via the
SCMI power protocol. As a result, the OS-visible DT only describes
the controller’s MMIO, interrupt, IOMMU and power-domain interfaces.
The generic "qcom,ufshc" and "jedec,ufs-2.0" compatible strings are
removed from the binding, since this firmware managed design won't
be compatible with the drivers doing full resource management.
Co-developed-by: Anjana Hari <anjana.hari@oss.qualcomm.com>
Signed-off-by: Anjana Hari <anjana.hari@oss.qualcomm.com>
Signed-off-by: Ram Kumar Dwivedi <ram.dwivedi@oss.qualcomm.com>
---
.../bindings/ufs/qcom,sa8255p-ufshc.yaml | 56 +++++++++++++++++++
1 file changed, 56 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ufs/qcom,sa8255p-ufshc.yaml
diff --git a/Documentation/devicetree/bindings/ufs/qcom,sa8255p-ufshc.yaml b/Documentation/devicetree/bindings/ufs/qcom,sa8255p-ufshc.yaml
new file mode 100644
index 000000000000..ea2f746117e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/qcom,sa8255p-ufshc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/qcom,sa8255p-ufshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SA8255P UFS Host Controller
+
+maintainers:
+ - Ram Kumar Dwivedi <ram.dwivedi@oss.qualcomm.com>
+
+properties:
+ compatible:
+ const: qcom,sa8255p-ufshc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ dma-coherent: true
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - iommus
+ - dma-coherent
+
+allOf:
+ - $ref: ufs-common.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ ufshc@1d84000 {
+ compatible = "qcom,sa8255p-ufshc";
+ reg = <0x01d84000 0x3000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ lanes-per-direction = <2>;
+
+ iommus = <&apps_smmu 0x100 0x0>;
+ power-domains = <&scmi3_pd 0>;
+ dma-coherent;
+ };
--
2.34.1
next prev parent reply other threads:[~2026-01-06 13:40 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-06 13:40 [PATCH V4 0/4] ufs: ufs-qcom: Add support firmware managed platforms Ram Kumar Dwivedi
2026-01-06 13:40 ` [PATCH V4 1/4] MAINTAINERS: broaden UFS Qualcomm binding file pattern Ram Kumar Dwivedi
2026-01-06 13:40 ` Ram Kumar Dwivedi [this message]
2026-01-07 7:38 ` [PATCH V4 2/4] dt-bindings: ufs: Document bindings for SA8255P UFS Host Controller Krzysztof Kozlowski
2026-01-13 7:25 ` Ram Kumar Dwivedi
2026-01-06 13:40 ` [PATCH V4 3/4] scsi: ufs: core Enforce minimum pm level for sysfs configuration Ram Kumar Dwivedi
2026-01-06 13:56 ` Bart Van Assche
2026-01-13 7:28 ` Ram Kumar Dwivedi
2026-01-06 14:27 ` Shawn Lin
2026-01-07 16:51 ` Manivannan Sadhasivam
2026-01-06 13:40 ` [PATCH V4 4/4] ufs: ufs-qcom: Add support for firmware-managed resource abstraction Ram Kumar Dwivedi
2026-01-08 4:42 ` Manivannan Sadhasivam
2026-01-13 7:21 ` Ram Kumar Dwivedi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260106134008.1969090-3-ram.dwivedi@oss.qualcomm.com \
--to=ram.dwivedi@oss.qualcomm.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=alim.akhtar@samsung.com \
--cc=anjana.hari@oss.qualcomm.com \
--cc=avri.altman@wdc.com \
--cc=bvanassche@acm.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mani@kernel.org \
--cc=martin.petersen@oracle.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox