Linux SCSI subsystem development
 help / color / mirror / Atom feed
From: Justin Tee <justintee8345@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: jsmart833426@gmail.com, justin.tee@broadcom.com,
	Justin Tee <justintee8345@gmail.com>
Subject: [PATCH 03/14] lpfc: Fix kernel oops when unmapping scsi dma buffers for an aborted cmd
Date: Thu,  4 Jun 2026 12:29:26 -0700	[thread overview]
Message-ID: <20260604192937.65605-4-justintee8345@gmail.com> (raw)
In-Reply-To: <20260604192937.65605-1-justintee8345@gmail.com>

A kernel oops at dma_unmap_sg_attrs may occur due to a race between an
aborted scsi I/O completion and a scsi error handler issued TUR using the
same repurposed scsi_cmnd structure.

The LPFC_DRIVER_ABORTED cmd_flag is set when inflight I/Os are aborted
via lpfc_sli_abort_taskmgmt, and this flag is not cleared until after
scsi_done is called.  The inflight I/O test is changed to check scsi I/O
for either LFPC_IO_ON_TXCMPLQ or LPFC_DRIVER_ABORTED.  If either cmd_flag
is set, then the I/O should still be counted.

Signed-off-by: Justin Tee <justintee8345@gmail.com>
---
 drivers/scsi/lpfc/lpfc_sli.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index d38fb374b379..20ee8171e31f 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -12725,8 +12725,12 @@ lpfc_sli_sum_iocb(struct lpfc_vport *vport, uint16_t tgt_id, uint64_t lun_id,
 
 		if (!iocbq || iocbq->vport != vport)
 			continue;
-		if (!(iocbq->cmd_flag & LPFC_IO_FCP) ||
-		    !(iocbq->cmd_flag & LPFC_IO_ON_TXCMPLQ))
+		/* Only count FCP i/o */
+		if (!(iocbq->cmd_flag & LPFC_IO_FCP))
+			continue;
+		/* Count i/o whilst LLDD retains an interest in the scsi_cmnd */
+		if (!(iocbq->cmd_flag &
+				(LPFC_IO_ON_TXCMPLQ | LPFC_DRIVER_ABORTED)))
 			continue;
 
 		/* Include counting outstanding aborts */
-- 
2.38.0


  parent reply	other threads:[~2026-06-04 18:50 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-04 19:29 [PATCH 00/14] Update lpfc to revision 15.0.0.1 Justin Tee
2026-06-04 19:29 ` [PATCH 01/14] lpfc: Fix use-after-free in lpfc_cmpl_ct_cmd_vmid Justin Tee
2026-06-04 19:29 ` [PATCH 02/14] lpfc: Early return out of lpfc_els_abort when HBA_SETUP flag is not set Justin Tee
2026-06-04 19:29 ` Justin Tee [this message]
2026-06-04 19:29 ` [PATCH 04/14] lpfc: Check fc4_xpt_flags before decrementing ndlp kref on FDISC error Justin Tee
2026-06-04 19:29 ` [PATCH 05/14] lpfc: Add handling for when PLOGI or PRLI is dropped during link failure Justin Tee
2026-06-04 19:29 ` [PATCH 06/14] lpfc: Fix ndlp use-after-free during repeated RSCN and rediscovery sequence Justin Tee
2026-06-04 19:29 ` [PATCH 07/14] lpfc: Rework I/O flush ordering when unloading driver Justin Tee
2026-06-04 19:29 ` [PATCH 08/14] lpfc: Improve PLOGI retry handling for large SAN configurations Justin Tee
2026-06-04 19:29 ` [PATCH 09/14] lpfc: Send inhibited ABORT_WQE when PLOGI CQE SEQUENCE_TMO is received Justin Tee
2026-06-04 19:29 ` [PATCH 10/14] lpfc: Remove slowpath cqe process limiter in slow ring event handler Justin Tee
2026-06-04 19:29 ` [PATCH 11/14] lpfc: Put iocbq on phba->txq when ELS WQ is full or ELS SGL unavailable Justin Tee
2026-06-04 19:29 ` [PATCH 12/14] lpfc: Update ELS ACC logging for diagnostic troubleshooting Justin Tee
2026-06-04 19:29 ` [PATCH 13/14] lpfc: Refactor calls on fc_disctmo to lpfc_set_disctmo in RSCN handler Justin Tee
2026-06-04 19:29 ` [PATCH 14/14] lpfc: Update lpfc version to 15.0.0.1 Justin Tee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260604192937.65605-4-justintee8345@gmail.com \
    --to=justintee8345@gmail.com \
    --cc=jsmart833426@gmail.com \
    --cc=justin.tee@broadcom.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox