From: Justin Tee <justintee8345@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: jsmart833426@gmail.com, justin.tee@broadcom.com,
Justin Tee <justintee8345@gmail.com>
Subject: [PATCH 04/14] lpfc: Check fc4_xpt_flags before decrementing ndlp kref on FDISC error
Date: Thu, 4 Jun 2026 12:29:27 -0700 [thread overview]
Message-ID: <20260604192937.65605-5-justintee8345@gmail.com> (raw)
In-Reply-To: <20260604192937.65605-1-justintee8345@gmail.com>
The current initial kref count drop logic for an ndlp that fails FDISC
assumes that the ndlp has never registered with transport layer and thus
the lpfc_dev_loss_tmo_callbk never called. However, a failed FDISC can
occur after a successful transport layer registration too. So,
lpfc_dev_loss_tmo_callbk can occur and there is a potential use-after-free
on the ndlp.
Check ndlp->fc4_xpt_flags if previously registered with an upper layer
transport and check ndlp->nlp_flags if there is a LPFC_EVT_DEV_LOSS work
pending. If not previously registered nor LPFC_EVT_DEV_LOSS work pending,
then set the NLP_DROPPED flag as before and decrement the initial kref on
FDISC error. However, if ndlp has been previously registered, then let the
pre-existing logic for each transport's respective dev_loss_tmo_callbk
perform the initial kref decrement.
Signed-off-by: Justin Tee <justintee8345@gmail.com>
---
drivers/scsi/lpfc/lpfc_els.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 4e3fe89283e4..896d69a0a655 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -11416,7 +11416,6 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
ulp_status, ulp_word4, vport->fc_prevDID);
if (ulp_status) {
-
if (lpfc_fabric_login_reqd(phba, cmdiocb, rspiocb)) {
lpfc_retry_pport_discovery(phba);
goto out;
@@ -11427,11 +11426,22 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
goto out;
/* Warn FDISC status */
lpfc_vlog_msg(vport, KERN_WARNING, LOG_ELS,
- "0126 FDISC cmpl status: x%x/x%x)\n",
- ulp_status, ulp_word4);
+ "0126 FDISC cmpl status: (x%x/x%x) ndlp x%px "
+ "Data: x%lx x%x x%x x%x x%x x%x x%x x%x x%x\n",
+ ulp_status, ulp_word4, ndlp, ndlp->nlp_flag,
+ ndlp->nlp_DID, ndlp->nlp_last_elscmd,
+ ndlp->nlp_type, ndlp->nlp_rpi, ndlp->nlp_state,
+ ndlp->nlp_prev_state, ndlp->fc4_xpt_flags,
+ kref_read(&ndlp->kref));
- /* drop initial reference */
- if (!test_and_set_bit(NLP_DROPPED, &ndlp->nlp_flag))
+ /* If have not previously registered with transport layer and no
+ * LPFC_EVT_DEV_LOSS work pending, then drop initial reference.
+ * Otherwise, let the dev_loss_tmo_callbk drop the initial
+ * reference.
+ */
+ if (!(ndlp->fc4_xpt_flags & (SCSI_XPT_REGD | NVME_XPT_REGD)) &&
+ !test_bit(NLP_IN_DEV_LOSS, &ndlp->nlp_flag) &&
+ !test_and_set_bit(NLP_DROPPED, &ndlp->nlp_flag))
lpfc_nlp_put(ndlp);
goto fdisc_failed;
--
2.38.0
next prev parent reply other threads:[~2026-06-04 18:50 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-04 19:29 [PATCH 00/14] Update lpfc to revision 15.0.0.1 Justin Tee
2026-06-04 19:29 ` [PATCH 01/14] lpfc: Fix use-after-free in lpfc_cmpl_ct_cmd_vmid Justin Tee
2026-06-04 19:29 ` [PATCH 02/14] lpfc: Early return out of lpfc_els_abort when HBA_SETUP flag is not set Justin Tee
2026-06-04 19:29 ` [PATCH 03/14] lpfc: Fix kernel oops when unmapping scsi dma buffers for an aborted cmd Justin Tee
2026-06-04 19:29 ` Justin Tee [this message]
2026-06-04 19:29 ` [PATCH 05/14] lpfc: Add handling for when PLOGI or PRLI is dropped during link failure Justin Tee
2026-06-04 19:29 ` [PATCH 06/14] lpfc: Fix ndlp use-after-free during repeated RSCN and rediscovery sequence Justin Tee
2026-06-04 19:29 ` [PATCH 07/14] lpfc: Rework I/O flush ordering when unloading driver Justin Tee
2026-06-04 19:29 ` [PATCH 08/14] lpfc: Improve PLOGI retry handling for large SAN configurations Justin Tee
2026-06-04 19:29 ` [PATCH 09/14] lpfc: Send inhibited ABORT_WQE when PLOGI CQE SEQUENCE_TMO is received Justin Tee
2026-06-04 19:29 ` [PATCH 10/14] lpfc: Remove slowpath cqe process limiter in slow ring event handler Justin Tee
2026-06-04 19:29 ` [PATCH 11/14] lpfc: Put iocbq on phba->txq when ELS WQ is full or ELS SGL unavailable Justin Tee
2026-06-04 19:29 ` [PATCH 12/14] lpfc: Update ELS ACC logging for diagnostic troubleshooting Justin Tee
2026-06-04 19:29 ` [PATCH 13/14] lpfc: Refactor calls on fc_disctmo to lpfc_set_disctmo in RSCN handler Justin Tee
2026-06-04 19:29 ` [PATCH 14/14] lpfc: Update lpfc version to 15.0.0.1 Justin Tee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260604192937.65605-5-justintee8345@gmail.com \
--to=justintee8345@gmail.com \
--cc=jsmart833426@gmail.com \
--cc=justin.tee@broadcom.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox