[PATCH v2 20/40] scsi: leapraid: use 16-bits defined sense codes

[Damien Le Moal <dlemoal@kernel.org>]

Refactor the leapraid driver to use the 16-bits sense_code field of
struct scsi_sense_hdr and replace all hard-coded additional sense codes
and additional sense code qualifiers with the enum values defined in
include/scsi/scsi_sense.h. This helps with code clarity as the sense codes
being processed are easier to test and self-documented.

With this change, the locally defined macros for ASC and ASCQ values are
deleted.

No functional change intended.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
---
 drivers/scsi/leapraid/leapraid_func.h |  7 -------
 drivers/scsi/leapraid/leapraid_os.c   | 15 +++++++--------
 2 files changed, 7 insertions(+), 15 deletions(-)

diff --git a/drivers/scsi/leapraid/leapraid_func.h b/drivers/scsi/leapraid/leapraid_func.h
index 4c0b9ca728d8..879d8cd5ec03 100644
--- a/drivers/scsi/leapraid/leapraid_func.h
+++ b/drivers/scsi/leapraid/leapraid_func.h
@@ -113,7 +113,6 @@
 #define DESC_FORMAT_THRESHOLD                   0x72
 #define SENSE_KEY_MASK                          0x0F
 #define SCSI_SENSE_RESPONSE_CODE_MASK           0x7F
-#define ASC_FAILURE_PREDICTION_THRESHOLD_EXCEEDED       0x5D
 #define LEAPRAID_LARGE_DISK_THRESHOLD           0x200000UL
 #define LEAPRAID_LARGE_DISK_HEADS               255
 #define LEAPRAID_LARGE_DISK_SECTORS             63
@@ -126,12 +125,6 @@
 #define LEAPRAID_SCSI_HOST_SHIFT                16
 #define LEAPRAID_SCSI_DRIVER_SHIFT              24
 
-/* SCSI ASC/ASCQ definitions. */
-#define LEAPRAID_SCSI_ASCQ_DEFAULT              0x00
-#define LEAPRAID_SCSI_ASC_POWER_ON_RESET        0x29
-#define LEAPRAID_SCSI_ASC_INVALID_CMD_CODE      0x20
-#define LEAPRAID_SCSI_ASCQ_POWER_ON_RESET       0x07
-
 /* VPD Page 0x89 (ATA Information). */
 #define LEAPRAID_VPD_PAGE_ATA_INFO      0x89
 #define LEAPRAID_VPD_PG89_MAX_LEN       255
diff --git a/drivers/scsi/leapraid/leapraid_os.c b/drivers/scsi/leapraid/leapraid_os.c
index ee3242779dfd..eb8b11439923 100644
--- a/drivers/scsi/leapraid/leapraid_os.c
+++ b/drivers/scsi/leapraid/leapraid_os.c
@@ -382,9 +382,8 @@ static void leapraid_handle_data_underrun(
 	} else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) {
 		scsiio_rep->scsi_state = LEAPRAID_SCSI_STATE_AUTOSENSE_VALID;
 		scsiio_rep->scsi_status = SAM_STAT_CHECK_CONDITION;
-		scsi_build_sense(scmd, 0, ILLEGAL_REQUEST,
-				 LEAPRAID_SCSI_ASC_INVALID_CMD_CODE,
-				 LEAPRAID_SCSI_ASCQ_DEFAULT);
+		scsi_set_sense(scmd, 0, ILLEGAL_REQUEST,
+			       INVALID_COMMAND_OP_CODE);
 	}
 }
 
@@ -515,8 +514,9 @@ static void leapraid_scsiio_done_dispatch(
 					 &sshdr))
 			dev_warn(&adapter->pdev->dev,
 				 "Sense: key=0x%x asc=0x%x ascq=0x%x\n",
-				 sshdr.sense_key, sshdr.asc,
-				 sshdr.ascq);
+				 sshdr.sense_key,
+				 scsi_sense_asc(&sshdr),
+				 scsi_sense_ascq(&sshdr));
 		else
 			dev_warn(&adapter->pdev->dev,
 				 "Sense: Invalid sense data\n");
@@ -810,9 +810,8 @@ static bool leapraid_should_queuecommand(struct leapraid_adapter *adapter,
 	if (sdev_priv->block &&
 	    scsi_get_host_state(scmd->device->host) == SHOST_RECOVERY &&
 	    scmd->cmnd[0] == TEST_UNIT_READY) {
-		scsi_build_sense(scmd, 0, UNIT_ATTENTION,
-				 LEAPRAID_SCSI_ASC_POWER_ON_RESET,
-				 LEAPRAID_SCSI_ASCQ_POWER_ON_RESET);
+		scsi_set_sense(scmd, 0, UNIT_ATTENTION,
+			       I_T_NEXUS_LOSS_OCCURRED);
 		goto scsiio_done;
 	}
 
-- 
2.55.0