Re: AIO!!

Re: AIO!!

[Karthik Sarangan]

 > Benjamin LaHaise wrote:
> O_DIRECT buffers must be aligned on block sized boundaries (minimum 512 
> bytes).  Check the actual return code from the aiocb and you'll find that 
> it is likely -EINVAL, no -EINPROGRESS.  See the man page for 
> posix_memalign() to properly align the pointer.
> 

EEP!! I forgot all about buffer alignment!! Thanks for pointing it out

:)

------------------

Two more questions.

1. Is aio_fsync of any use while 'aio_read'ing and 'aio_write'ing to
    a 'raw' device or a '/dev/sdb' with O_DIRECT?

2. I have an Ultra320 SCSI disk whose datasheet says it has a max.
    possible throughput of 78MBps

    I did a 'aio_write' onto '/dev/sdb' with O_DIRECT.
    Following are some throughput values.

    Buffer for IO   |  Avg Speed
    (in KBytes)     |
    ----------------O-----------
    Upto 512KB      |  69MBps
    1024KB          |  125MBps
    2048KB          |  250MBps
    4096KB          |  500MBps
    8192KB          |  1GBps		-- What the !! --

    Buffer cache does not come into consideration.

    Does this mean that the SCSI lower layer (aic79xx) can transfer data
    only upto 512 KB?

Re: AIO!!

[Denis Vlasenko]

On Tuesday 11 October 2005 08:04, Karthik Sarangan wrote:
>  > Benjamin LaHaise wrote:
> > O_DIRECT buffers must be aligned on block sized boundaries (minimum 512 
> > bytes).  Check the actual return code from the aiocb and you'll find that 
> > it is likely -EINVAL, no -EINPROGRESS.  See the man page for 
> > posix_memalign() to properly align the pointer.
> 
> EEP!! I forgot all about buffer alignment!! Thanks for pointing it out

Why do you constantly shout?

> ------------------
> Two more questions.
> 
> 1. Is aio_fsync of any use while 'aio_read'ing and 'aio_write'ing to
>     a 'raw' device or a '/dev/sdb' with O_DIRECT?

I suspect you did not do some research first.

> 2. I have an Ultra320 SCSI disk whose datasheet says it has a max.
>     possible throughput of 78MBps
> 
>     I did a 'aio_write' onto '/dev/sdb' with O_DIRECT.
>     Following are some throughput values.
> 
>     Buffer for IO   |  Avg Speed
>     (in KBytes)     |
>     ----------------O-----------
>     Upto 512KB      |  69MBps
>     1024KB          |  125MBps
>     2048KB          |  250MBps
>     4096KB          |  500MBps
>     8192KB          |  1GBps		-- What the !! --

Most probably bug in your program.

>     Buffer cache does not come into consideration.
> 
>     Does this mean that the SCSI lower layer (aic79xx) can transfer data
>     only upto 512 KB?

It means that you are in dire need of reading this:

http://www.catb.org/~esr/faqs/smart-questions.html

--
vda