From: sashiko-bot@kernel.org
To: "Shivasharan S" <shivasharan.srikanteshwara@broadcom.com>,
linux-scsi@vger.kernel.org
Subject: Re: [PATCH v2 08/37] scsi: mpt3sas: Validate firmware/user supplied device handles against MaxDevHandle
Date: Wed, 18 Nov 2026 10:33:47 +0000 [thread overview]
Message-ID: <sashiko-outbox-220705@kernel.org> (raw)
In-Reply-To: <1794995806-5835-9-git-send-email-shivasharan.srikanteshwara@broadcom.com>
Thank you for your contribution! Sashiko AI review found 2 potential
issues to consider:
- [Medium] scsi: mpt3sas: missing MaxDevHandle checks in PCIe event and
add paths
- [Medium] scsi: mpt3sas: missing MaxDevHandle checks in SAS phy change
and check paths
--
commit 1475cb70df52e6382fa2780421f221a0823686a6
Author: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
scsi: mpt3sas: Validate firmware/user supplied device handles against MaxDevHandle
This commit validates firmware-supplied and ioctl-supplied device handles
against ioc->facts.MaxDevHandle across event, discovery, post-reset scan,
TM/control completion, and ioctl passthrough paths.
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> index 852c164996384..a310605806b18 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
[ ... ]
> @@ -8399,6 +8418,13 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 retry_count,
> u8 connector_name[5];
> u8 port_id;
>
> + if (handle >= ioc->facts.MaxDevHandle) {
> + /* not retryable: drop the device instead of looping forever */
> + ioc_err(ioc, "handle(0x%04x) out of bounds in %s\n",
> + handle, __func__);
> + return 0;
> + }
> +
> if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
> MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
> ioc_err(ioc, "failure at %s:%d/%s()!\n",
> @@ -9186,6 +9212,12 @@ _scsih_pcie_check_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
[Severity: Medium]
Can an out-of-bounds AttachedDevHandle in _scsih_sas_topology_change_event()
still index ioc->pend_os_device_add and overwrite sas_device->handle before
reaching _scsih_add_device()?
On MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED, _scsih_sas_topology_change_event()
passes the unvalidated handle to _scsih_check_device() (which unlike
_scsih_pcie_check_device() has no MaxDevHandle check and overwrites
sas_target_priv_data->handle and sas_device->handle) and then reads
test_bit(handle, ioc->pend_os_device_add) before falling through to
_scsih_add_device():
drivers/scsi/mpt3sas/mpt3sas_scsih.c:_scsih_sas_topology_change_event() {
...
case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
...
_scsih_check_device(ioc, sas_address, handle,
phy_number, link_rate);
...
if (!test_bit(handle, ioc->pend_os_device_add))
break;
...
}
> struct MPT3SAS_TARGET *sas_target_priv_data;
> u32 device_info;
>
> + if (handle >= ioc->facts.MaxDevHandle) {
> + ioc_err(ioc, "handle(0x%04x) out of bounds in %s\n",
> + handle, __func__);
> + return;
> + }
> +
> if ((mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
> &pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE, handle)))
> return;
[Severity: Medium]
When _scsih_pcie_check_device() returns early on an out-of-bounds handle,
does its caller _scsih_pcie_topology_change_event() still pass that handle to
test_bit(handle, ioc->pend_os_device_add)?
Because _scsih_pcie_check_device() returns void,
_scsih_pcie_topology_change_event() continues after __mpt3sas_get_pdev_by_handle()
returns NULL and reads past the end of ioc->pend_os_device_add:
drivers/scsi/mpt3sas/mpt3sas_scsih.c:_scsih_pcie_topology_change_event() {
...
_scsih_pcie_check_device(ioc, handle);
...
if (pcie_device) {
pcie_device_put(pcie_device);
break;
}
if (!test_bit(handle, ioc->pend_os_device_add))
break;
...
}
In addition, _scsih_pcie_add_device() (called from the
MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED case right below and from
_scsih_scan_for_devices_after_reset()) lacks the handle >=
ioc->facts.MaxDevHandle check added to _scsih_add_device(), so an
out-of-bounds PCIe handle will execute set_bit(handle,
ioc->pend_os_device_add) and corrupt adjacent heap memory.
--
Sashiko AI review · https://sashiko.dev/#/patchset/1794995806-5835-1-git-send-email-shivasharan.srikanteshwara@broadcom.com?part=8
next prev parent reply other threads:[~2026-11-18 10:33 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 9:56 [PATCH v2 00/37] scsi: mpt3sas: Validate firmware/user input and fix error-path bugs Shivasharan S
2026-11-18 9:56 ` [PATCH v2 01/37] scsi: mpt3sas: Validate firmware-reported IOCRequestFrameSize Shivasharan S
2026-11-18 10:28 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 02/37] scsi: mpt3sas: Validate RAID configuration page length Shivasharan S
2026-11-18 10:22 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 03/37] scsi: mpt3sas: Pin Scsi_Host while an ioctl is using its ioc Shivasharan S
2026-11-18 10:41 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 04/37] scsi: mpt3sas: Fix locking and bounds checks on host_trace_buffer sysfs files Shivasharan S
2026-11-18 10:37 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 05/37] scsi: mpt3sas: Fix unlocked use of raid_device in enable_sdev_max_qd_store Shivasharan S
2026-11-18 10:36 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 06/37] scsi: mpt3sas: Fix invalid kfree() of fw_event_work event_data Shivasharan S
2026-11-18 10:30 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 07/37] scsi: mpt3sas: Validate SMP request/response length in bsg handler Shivasharan S
2026-11-18 10:29 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 08/37] scsi: mpt3sas: Validate firmware/user supplied device handles against MaxDevHandle Shivasharan S
2026-11-18 10:33 ` sashiko-bot [this message]
2026-11-18 9:56 ` [PATCH v2 09/37] scsi: mpt3sas: Clamp topology/IR event entry counts to EventDataLength Shivasharan S
2026-11-18 9:56 ` [PATCH v2 10/37] scsi: mpt3sas: NULL ioc->reply_post after freeing it Shivasharan S
2026-11-18 10:27 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 11/37] scsi: mpt3sas: Fix port_table memory leak in _scsih_sas_port_refresh Shivasharan S
2026-11-18 10:22 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 12/37] scsi: mpt3sas: Fix leak and dangling pointer for io_uring_poll_queues Shivasharan S
2026-11-18 10:32 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 13/37] scsi: mpt3sas: Validate max_data_size in MPT3EVENTREPORT ioctl Shivasharan S
2026-11-18 10:20 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 14/37] scsi: mpt3sas: Fix buffer overflow in _scsih_scsi_ioc_info Shivasharan S
2026-11-18 10:21 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 15/37] scsi: mpt3sas: Fix Scsi_Host leak on invalid/tampered device probe Shivasharan S
2026-11-18 10:26 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 16/37] scsi: mpt3sas: Fix page fault from stale ioc->chip after PCI error recovery Shivasharan S
2026-11-18 11:01 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 17/37] scsi: mpt3sas: Clamp ValidEntries in driver trigger page update helpers Shivasharan S
2026-11-18 10:29 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 18/37] scsi: mpt3sas: Clamp firmware reply copies to the allocated reply buffer Shivasharan S
2026-11-18 10:29 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 19/37] scsi: mpt3sas: Reject implausibly small MaxReplyDescriptorPostQueueDepth Shivasharan S
2026-11-18 10:33 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 20/37] scsi: mpt3sas: Validate CurrentHostPageSize before using it as a shift amount Shivasharan S
2026-11-18 10:33 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 21/37] scsi: mpt3sas: Clamp sense_length before copying into transfer_packet->sense Shivasharan S
2026-11-18 10:35 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 22/37] scsi: mpt3sas: Clamp num_luns in _scsih_wait_for_target_to_become_ready Shivasharan S
2026-11-18 10:32 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 23/37] scsi: mpt3sas: Validate phy_number in mpt3sas_transport_update_links Shivasharan S
2026-11-18 10:42 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 24/37] scsi: mpt3sas: Require CAP_SYS_RAWIO for mpt2ctl/mpt3ctl ioctls Shivasharan S
2026-11-18 9:56 ` [PATCH v2 25/37] scsi: mpt3sas: Fix SGE offset boundary check in _ctl_do_mpt_command Shivasharan S
2026-11-18 10:39 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 26/37] scsi: mpt3sas: Enforce minimum reply frame size and validate chain segment size Shivasharan S
2026-11-18 10:46 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 27/37] scsi: mpt3sas: Replace panic() with error return in hard_reset_handler Shivasharan S
2026-11-18 9:56 ` [PATCH v2 28/37] scsi: mpt3sas: Replace panic() calls with error returns in _config_request Shivasharan S
2026-11-18 9:56 ` [PATCH v2 29/37] scsi: mpt3sas: Bound event-log copy size against reply frame size Shivasharan S
2026-11-18 10:39 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 30/37] scsi: mpt3sas: Add _ctl_diag_buffer_reset() helper to clear diag buffer state Shivasharan S
2026-11-18 9:56 ` [PATCH v2 31/37] scsi: mpt3sas: Restrict ioc_dump debugfs and replace raw ioc dump with text Shivasharan S
2026-11-18 10:38 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 32/37] scsi: mpt3sas: Fix out-of-bounds bit operation in _scsih_check_topo_delete_events Shivasharan S
2026-11-18 10:38 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 33/37] scsi: mpt3sas: Bound SMP passthrough buffer reads to actual buffer size Shivasharan S
2026-11-18 10:40 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 34/37] scsi: mpt3sas: Release sas_device reference on error in mpt3sas_transport_port_add Shivasharan S
2026-11-18 10:51 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 35/37] scsi: mpt3sas: NULL the event_log pointer after freeing it Shivasharan S
2026-11-18 9:56 ` [PATCH v2 36/37] scsi: mpt3sas: Bound NVMe passthrough transfer size against PRP buffer capacity Shivasharan S
2026-11-18 10:47 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 37/37] scsi: mpt3sas: Update driver version to 59.100.00.00 Shivasharan S
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-220705@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=shivasharan.srikanteshwara@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox