Re: Serial PCI driver in 2.6.x kernel (i.e. 8250_pci HOWTO)

Re: Serial PCI driver in 2.6.x kernel (i.e. 8250_pci HOWTO)

[Russell King]

On Tue, Jul 05, 2005 at 04:06:22PM -0500, Matt Schulte wrote:
> In the past (2.4.x days) I have just hacked the serial.c code to do what I
> needed and then recompiled it as something else.

Can we see this code?

> Remember, please copy the serial list at linux-serial@vger.kernel.org

Despite being the maintainer for the serial layer, I'm not on linux-serial.

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 Serial core

RE: Serial PCI driver in 2.6.x kernel (i.e. 8250_pci HOWTO)

[Matt Schulte]

>From: Russell King [mailto:rmk@arm.linux.org.uk]On Behalf Of Russell King

>Can we see this code?
Because I was working on the assumption that the driver would no longer be
serial.c and would use only my card, I may have done some things that
weren't exactly the best practice.  This is partially why I am trying to
figure out the "correct" way to use the new serial driver.  Because I went
with the entire serial.c file, I don't think that I can post it.  However,
you can get my modifications here:
http://support.commtech-fastcom.com/fcap335_07_11_2005.tar.gz.  I renamed
the serial.c file to fcap_335.c and I changed the devnodes to be
/dev/ttyFCx.  I think every modification that I made has a comment //mds
near it.

>Despite being the maintainer for the serial layer, I'm not on linux-serial.
Right, I am on linux-serial and I had seen a couple of posts from you on
linux-serial, I kind of assumed that you were there too.

Thanks,

Matt Schulte
Commtech, Inc.
http://www.commtech-fastcom.com