Linux Serial subsystem development
 help / color / mirror / Atom feed
From: Michael Walle <michael@walle.cc>
To: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jirislaby@kernel.org>,
	Angelo Dureghello <angelo.dureghello@timesys.com>,
	Fugang Duan <fugang.duan@nxp.com>,
	Philippe Schenker <philippe.schenker@toradex.com>,
	Michael Walle <michael@walle.cc>
Subject: [PATCH 3/8] serial: fsl_lpuart: don't restore interrupt state in ISR
Date: Tue, 11 May 2021 22:01:43 +0200	[thread overview]
Message-ID: <20210511200148.11934-4-michael@walle.cc> (raw)
In-Reply-To: <20210511200148.11934-1-michael@walle.cc>

Since commit 81e2073c175b ("genirq: Disable interrupts for force
threaded handlers") interrupt handlers that are not explicitly requested
as threaded are always called with interrupts disabled and there is no
need to save the interrupt state when taking the port lock.

This is a preparation for sysrq handling which uses
uart_unlock_and_check_sysrq();

Signed-off-by: Michael Walle <michael@walle.cc>
---
 drivers/tty/serial/fsl_lpuart.c | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index b76ddc0d8edc..37e02d992c0b 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -824,21 +824,18 @@ static unsigned int lpuart32_tx_empty(struct uart_port *port)
 
 static void lpuart_txint(struct lpuart_port *sport)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&sport->port.lock, flags);
+	spin_lock(&sport->port.lock);
 	lpuart_transmit_buffer(sport);
-	spin_unlock_irqrestore(&sport->port.lock, flags);
+	spin_unlock(&sport->port.lock);
 }
 
 static void lpuart_rxint(struct lpuart_port *sport)
 {
 	unsigned int flg, ignored = 0, overrun = 0;
 	struct tty_port *port = &sport->port.state->port;
-	unsigned long flags;
 	unsigned char rx, sr;
 
-	spin_lock_irqsave(&sport->port.lock, flags);
+	spin_lock(&sport->port.lock);
 
 	while (!(readb(sport->port.membase + UARTSFIFO) & UARTSFIFO_RXEMPT)) {
 		flg = TTY_NORMAL;
@@ -896,28 +893,25 @@ static void lpuart_rxint(struct lpuart_port *sport)
 		writeb(UARTSFIFO_RXOF, sport->port.membase + UARTSFIFO);
 	}
 
-	spin_unlock_irqrestore(&sport->port.lock, flags);
+	spin_unlock(&sport->port.lock);
 
 	tty_flip_buffer_push(port);
 }
 
 static void lpuart32_txint(struct lpuart_port *sport)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&sport->port.lock, flags);
+	spin_lock(&sport->port.lock);
 	lpuart32_transmit_buffer(sport);
-	spin_unlock_irqrestore(&sport->port.lock, flags);
+	spin_unlock(&sport->port.lock);
 }
 
 static void lpuart32_rxint(struct lpuart_port *sport)
 {
 	unsigned int flg, ignored = 0;
 	struct tty_port *port = &sport->port.state->port;
-	unsigned long flags;
 	unsigned long rx, sr;
 
-	spin_lock_irqsave(&sport->port.lock, flags);
+	spin_lock(&sport->port.lock);
 
 	while (!(lpuart32_read(&sport->port, UARTFIFO) & UARTFIFO_RXEMPT)) {
 		flg = TTY_NORMAL;
@@ -965,7 +959,7 @@ static void lpuart32_rxint(struct lpuart_port *sport)
 	}
 
 out:
-	spin_unlock_irqrestore(&sport->port.lock, flags);
+	spin_unlock(&sport->port.lock);
 
 	tty_flip_buffer_push(port);
 }
-- 
2.20.1


  parent reply	other threads:[~2021-05-11 20:02 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-11 20:01 [PATCH 0/8] serial: fsl_lpuart: sysrq, loopback support and fixes Michael Walle
2021-05-11 20:01 ` [PATCH 1/8] serial: fsl_lpuart: don't modify arbitrary data on lpuart32 Michael Walle
2021-05-11 20:01 ` [PATCH 2/8] serial: fsl_lpuart: use UARTDATA_MASK macro Michael Walle
2021-05-11 20:01 ` Michael Walle [this message]
2021-05-12  9:25   ` [PATCH 3/8] serial: fsl_lpuart: don't restore interrupt state in ISR Johan Hovold
2021-05-12  9:42     ` Michael Walle
2021-05-11 20:01 ` [PATCH 4/8] serial: fsl_lpuart: handle break and make sysrq work Michael Walle
2021-05-12  9:30   ` Johan Hovold
2021-05-12  9:46     ` Michael Walle
2021-05-12 10:07       ` Johan Hovold
2021-05-12 10:31         ` Michael Walle
2021-05-12 11:18           ` Johan Hovold
2021-05-11 20:01 ` [PATCH 5/8] serial: fsl_lpuart: remove RTSCTS handling from get_mctrl() Michael Walle
2021-05-11 20:01 ` [PATCH 6/8] serial: fsl_lpuart: remove manual RTSCTS control from 8-bit LPUART Michael Walle
2021-05-11 20:01 ` [PATCH 7/8] serial: fsl_lpuart: add loopback support Michael Walle
2021-05-11 20:01 ` [PATCH 8/8] serial: fsl_lpuart: disable DMA for console and fix sysrq Michael Walle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210511200148.11934-4-michael@walle.cc \
    --to=michael@walle.cc \
    --cc=angelo.dureghello@timesys.com \
    --cc=fugang.duan@nxp.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jirislaby@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=philippe.schenker@toradex.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox