[PATCH v2 13/15] serial: max310x: use new UPIO_BUS as iotype

[Hugo Villeneuve <hugo@hugovil.com>]

From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

Now that we have a new UPIO_BUS I/O type, use it to register our serial
port and remove obscure membase/iobase workaround.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
 drivers/tty/serial/max310x.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index ac7d3f197c3a5ce3531d5607f48e21a807314021..cd0496e307091dae1f53911abf86726f52d5770d 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1380,14 +1380,7 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 		s->p[i].port.type	= PORT_MAX310X;
 		s->p[i].port.fifosize	= MAX310X_FIFO_SIZE;
 		s->p[i].port.flags	= UPF_FIXED_TYPE | UPF_LOW_LATENCY;
-		s->p[i].port.iotype	= UPIO_PORT;
-		s->p[i].port.iobase	= i;
-		/*
-		 * Use all ones as membase to make sure uart_configure_port() in
-		 * serial_core.c does not abort for SPI/I2C devices where the
-		 * membase address is not applicable.
-		 */
-		s->p[i].port.membase	= (void __iomem *)~0;
+		s->p[i].port.iotype	= UPIO_BUS;
 		s->p[i].port.uartclk	= uartclk;
 		s->p[i].port.rs485_config = max310x_rs485_config;
 		s->p[i].port.rs485_supported = max310x_rs485_supported;

-- 
2.47.3