[PATCH 1/7] tty: xuartps: Sort #includes alphabetically

[PATCH 1/7] tty: xuartps: Sort #includes alphabetically

[Soren Brinkmann]

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Jiri Slaby <jslaby@suse.cz>
CC: linux-serial@vger.kernel.org
---
 drivers/tty/serial/xilinx_uartps.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 4e5c778..773732b 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -11,17 +11,17 @@
  *
  */
 
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
-#include <linux/console.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/module.h>
 
 #define XUARTPS_TTY_NAME	"ttyPS"
 #define XUARTPS_NAME		"xuartps"
-- 
1.8.2.2

Re: [PATCH 1/7] tty: xuartps: Sort #includes alphabetically

[Greg Kroah-Hartman]

On Tue, Apr 30, 2013 at 04:57:58PM -0700, Soren Brinkmann wrote:
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> CC: Jiri Slaby <jslaby@suse.cz>
> CC: linux-serial@vger.kernel.org

Why would you need/want to do this?

greg k-h

Re: [PATCH 1/7] tty: xuartps: Sort #includes alphabetically

[Sören Brinkmann]

On Tue, Apr 30, 2013 at 05:00:48PM -0700, Greg Kroah-Hartman wrote:
> On Tue, Apr 30, 2013 at 04:57:58PM -0700, Soren Brinkmann wrote:
> > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> > CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > CC: Jiri Slaby <jslaby@suse.cz>
> > CC: linux-serial@vger.kernel.org
> 
> Why would you need/want to do this?
I often come across duplicated includes. Having some kind of order helps
avoiding that, imho.

	Sören


--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/7] tty: xuartps: Sort #includes alphabetically

[Greg Kroah-Hartman]

On Tue, Apr 30, 2013 at 05:05:40PM -0700, Sören Brinkmann wrote:
> On Tue, Apr 30, 2013 at 05:00:48PM -0700, Greg Kroah-Hartman wrote:
> > On Tue, Apr 30, 2013 at 04:57:58PM -0700, Soren Brinkmann wrote:
> > > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> > > CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > CC: Jiri Slaby <jslaby@suse.cz>
> > > CC: linux-serial@vger.kernel.org
> > 
> > Why would you need/want to do this?
> I often come across duplicated includes. Having some kind of order helps
> avoiding that, imho.

We have a tool to handle duplicated includes, no need to put them in
sorted order for them to be detected.

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/7] tty: xuartps: Sort #includes alphabetically

[Michal Simek]

[-- Attachment #1: Type: text/plain, Size: 1190 bytes --]

On 05/01/2013 02:23 AM, Greg Kroah-Hartman wrote:
> On Tue, Apr 30, 2013 at 05:05:40PM -0700, Sören Brinkmann wrote:
>> On Tue, Apr 30, 2013 at 05:00:48PM -0700, Greg Kroah-Hartman wrote:
>>> On Tue, Apr 30, 2013 at 04:57:58PM -0700, Soren Brinkmann wrote:
>>>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>>> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>>> CC: Jiri Slaby <jslaby@suse.cz>
>>>> CC: linux-serial@vger.kernel.org
>>>
>>> Why would you need/want to do this?
>> I often come across duplicated includes. Having some kind of order helps
>> avoiding that, imho.
> 
> We have a tool to handle duplicated includes, no need to put them in
> sorted order for them to be detected.

What's the name of tool which does that?
I have seen results from it but have never tried to find it out name and
how to use it.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]

Re: [PATCH 1/7] tty: xuartps: Sort #includes alphabetically

[Greg Kroah-Hartman]

On Wed, May 01, 2013 at 08:50:09AM +0200, Michal Simek wrote:
> On 05/01/2013 02:23 AM, Greg Kroah-Hartman wrote:
> > On Tue, Apr 30, 2013 at 05:05:40PM -0700, Sören Brinkmann wrote:
> >> On Tue, Apr 30, 2013 at 05:00:48PM -0700, Greg Kroah-Hartman wrote:
> >>> On Tue, Apr 30, 2013 at 04:57:58PM -0700, Soren Brinkmann wrote:
> >>>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> >>>> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >>>> CC: Jiri Slaby <jslaby@suse.cz>
> >>>> CC: linux-serial@vger.kernel.org
> >>>
> >>> Why would you need/want to do this?
> >> I often come across duplicated includes. Having some kind of order helps
> >> avoiding that, imho.
> > 
> > We have a tool to handle duplicated includes, no need to put them in
> > sorted order for them to be detected.
> 
> What's the name of tool which does that?
> I have seen results from it but have never tried to find it out name and
> how to use it.

scripts/checkincludes.pl

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/7] tty: xuartps: Sort #includes alphabetically

[Sören Brinkmann]

On Tue, Apr 30, 2013 at 05:23:21PM -0700, Greg Kroah-Hartman wrote:
> On Tue, Apr 30, 2013 at 05:05:40PM -0700, Sören Brinkmann wrote:
> > On Tue, Apr 30, 2013 at 05:00:48PM -0700, Greg Kroah-Hartman wrote:
> > > On Tue, Apr 30, 2013 at 04:57:58PM -0700, Soren Brinkmann wrote:
> > > > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> > > > CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > > CC: Jiri Slaby <jslaby@suse.cz>
> > > > CC: linux-serial@vger.kernel.org
> > > 
> > > Why would you need/want to do this?
> > I often come across duplicated includes. Having some kind of order helps
> > avoiding that, imho.
> 
> We have a tool to handle duplicated includes, no need to put them in
> sorted order for them to be detected.
During conflict resolution, I find it easier when there is some order.
Anyway, consider it dropped.

	Sören


--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/7] tty: xuartps: Remove suspend/resume functions

[Soren Brinkmann]

Currently Zynq does not support suspend/resume.
The driver callbacks are never used or tested, broken and using the old
PM interface.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
---
 drivers/tty/serial/xilinx_uartps.c | 30 ------------------------------
 1 file changed, 30 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 773732b..04a1f8f 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1006,34 +1006,6 @@ static int xuartps_remove(struct platform_device *pdev)
 	return rc;
 }
 
-/**
- * xuartps_suspend - suspend event
- * @pdev: Pointer to the platform device structure
- * @state: State of the device
- *
- * Returns 0
- **/
-static int xuartps_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	/* Call the API provided in serial_core.c file which handles
-	 * the suspend.
-	 */
-	uart_suspend_port(&xuartps_uart_driver, &xuartps_port[pdev->id]);
-	return 0;
-}
-
-/**
- * xuartps_resume - Resume after a previous suspend
- * @pdev: Pointer to the platform device structure
- *
- * Returns 0
- **/
-static int xuartps_resume(struct platform_device *pdev)
-{
-	uart_resume_port(&xuartps_uart_driver, &xuartps_port[pdev->id]);
-	return 0;
-}
-
 /* Match table for of_platform binding */
 static struct of_device_id xuartps_of_match[] = {
 	{ .compatible = "xlnx,xuartps", },
@@ -1044,8 +1016,6 @@ MODULE_DEVICE_TABLE(of, xuartps_of_match);
 static struct platform_driver xuartps_platform_driver = {
 	.probe   = xuartps_probe,		/* Probe method */
 	.remove  = xuartps_remove,		/* Detach method */
-	.suspend = xuartps_suspend,		/* Suspend */
-	.resume  = xuartps_resume,		/* Resume after a suspend */
 	.driver  = {
 		.owner = THIS_MODULE,
 		.name = XUARTPS_NAME,		/* Driver name */
-- 
1.8.2.2

[PATCH 6/7] arm: zynq: Migrate platform to clock controller

[Soren Brinkmann]

Migrate the Zynq platform and its drivers to use the new clock
controller driver.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
---
 arch/arm/boot/dts/zynq-7000.dtsi        | 71 ++++++++-------------------
 arch/arm/boot/dts/zynq-zc702.dts        |  4 --
 arch/arm/mach-zynq/slcr.c               |  2 +-
 drivers/clk/Makefile                    |  2 +-
 drivers/clk/zynq/Makefile               |  3 ++
 drivers/clocksource/cadence_ttc_timer.c | 23 +++++++--
 drivers/tty/serial/xilinx_uartps.c      | 85 ++++++++++++++++++++++++++-------
 include/linux/clk/zynq.h                |  8 +++-
 8 files changed, 118 insertions(+), 80 deletions(-)
 create mode 100644 drivers/clk/zynq/Makefile

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 2a1df1b..5337554 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -42,16 +42,18 @@
 
 		uart0: uart@e0000000 {
 			compatible = "xlnx,xuartps";
+			clocks = <&clkc 23>, <&clkc 40>;
+			clock-names = "ref_clk", "aper_clk";
 			reg = <0xE0000000 0x1000>;
 			interrupts = <0 27 4>;
-			clocks = <&uart_clk 0>;
 		};
 
 		uart1: uart@e0001000 {
 			compatible = "xlnx,xuartps";
+			clocks = <&clkc 24>, <&clkc 41>;
+			clock-names = "ref_clk", "aper_clk";
 			reg = <0xE0001000 0x1000>;
 			interrupts = <0 50 4>;
-			clocks = <&uart_clk 1>;
 		};
 
 		slcr: slcr@f8000000 {
@@ -62,50 +64,21 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				ps_clk: ps_clk {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					/* clock-frequency set in board-specific file */
-					clock-output-names = "ps_clk";
-				};
-				armpll: armpll {
-					#clock-cells = <0>;
-					compatible = "xlnx,zynq-pll";
-					clocks = <&ps_clk>;
-					reg = <0x100 0x110>;
-					clock-output-names = "armpll";
-				};
-				ddrpll: ddrpll {
-					#clock-cells = <0>;
-					compatible = "xlnx,zynq-pll";
-					clocks = <&ps_clk>;
-					reg = <0x104 0x114>;
-					clock-output-names = "ddrpll";
-				};
-				iopll: iopll {
-					#clock-cells = <0>;
-					compatible = "xlnx,zynq-pll";
-					clocks = <&ps_clk>;
-					reg = <0x108 0x118>;
-					clock-output-names = "iopll";
-				};
-				uart_clk: uart_clk {
-					#clock-cells = <1>;
-					compatible = "xlnx,zynq-periph-clock";
-					clocks = <&iopll &armpll &ddrpll>;
-					reg = <0x154>;
-					clock-output-names = "uart0_ref_clk",
-							     "uart1_ref_clk";
-				};
-				cpu_clk: cpu_clk {
+				clkc: clkc {
 					#clock-cells = <1>;
-					compatible = "xlnx,zynq-cpu-clock";
-					clocks = <&iopll &armpll &ddrpll>;
-					reg = <0x120 0x1C4>;
-					clock-output-names = "cpu_6x4x",
-							     "cpu_3x2x",
-							     "cpu_2x",
-							     "cpu_1x";
+					compatible = "xlnx,ps7-clkc";
+					ps-clk-frequency = <33333333>;
+					clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+							"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+							"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+							"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+							"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+							"dma", "usb0_aper", "usb1_aper", "gem0_aper",
+							"gem1_aper", "sdio0_aper", "sdio1_aper",
+							"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+							"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+							"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+							"dbg_trc", "dbg_apb";
 				};
 			};
 		};
@@ -114,9 +87,8 @@
 			interrupt-parent = <&intc>;
 			interrupts = < 0 10 4 0 11 4 0 12 4 >;
 			compatible = "cdns,ttc";
+			clocks = <&clkc 6>;
 			reg = <0xF8001000 0x1000>;
-			clocks = <&cpu_clk 3>;
-			clock-names = "cpu_1x";
 			clock-ranges;
 		};
 
@@ -124,9 +96,8 @@
 			interrupt-parent = <&intc>;
 			interrupts = < 0 37 4 0 38 4 0 39 4 >;
 			compatible = "cdns,ttc";
+			clocks = <&clkc 6>;
 			reg = <0xF8002000 0x1000>;
-			clocks = <&cpu_clk 3>;
-			clock-names = "cpu_1x";
 			clock-ranges;
 		};
 		scutimer: scutimer@f8f00600 {
@@ -134,7 +105,7 @@
 			interrupts = < 1 13 0x301 >;
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = < 0xf8f00600 0x20 >;
-			clocks = <&cpu_clk 1>;
+			clocks = <&clkc 4>;
 		} ;
 	};
 };
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 86f44d5..e25a307 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -28,7 +28,3 @@
 	};
 
 };
-
-&ps_clk {
-	clock-frequency = <33333330>;
-};
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index c70969b..50d008d 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -117,7 +117,7 @@ int __init zynq_slcr_init(void)
 
 	pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
 
-	xilinx_zynq_clocks_init(zynq_slcr_base);
+	zynq_clock_init(zynq_slcr_base);
 
 	of_node_put(np);
 
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index e7f7fe9..addfd02 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_MACH_LOONGSON1)	+= clk-ls1x.o
 obj-$(CONFIG_ARCH_SUNXI)	+= sunxi/
 obj-$(CONFIG_ARCH_U8500)	+= ux500/
 obj-$(CONFIG_ARCH_VT8500)	+= clk-vt8500.o
-obj-$(CONFIG_ARCH_ZYNQ)		+= clk-zynq.o
+obj-$(CONFIG_ARCH_ZYNQ)		+= zynq/
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 
 obj-$(CONFIG_X86)		+= x86/
diff --git a/drivers/clk/zynq/Makefile b/drivers/clk/zynq/Makefile
new file mode 100644
index 0000000..156d923
--- /dev/null
+++ b/drivers/clk/zynq/Makefile
@@ -0,0 +1,3 @@
+# Zynq clock specific Makefile
+
+obj-$(CONFIG_ARCH_ZYNQ)	+= clkc.o pll.o
diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
index ab8fc2c..6d961ad 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -51,6 +51,8 @@
 
 #define TTC_CNT_CNTRL_DISABLE_MASK	0x1
 
+#define TTC_CLK_CNTRL_CSRC_MASK		(1 << 5)	/* clock source */
+
 /*
  * Setup the timers to use pre-scaling, using a fixed value for now that will
  * work across most input frequency, but it may need to be more dynamic
@@ -396,8 +398,9 @@ static void __init ttc_timer_init(struct device_node *timer)
 {
 	unsigned int irq;
 	void __iomem *timer_baseaddr;
-	struct clk *clk;
+	struct clk *clk_cs, *clk_ce;
 	static int initialized;
+	int clksel;
 
 	if (initialized)
 		return;
@@ -421,14 +424,24 @@ static void __init ttc_timer_init(struct device_node *timer)
 		BUG();
 	}
 
-	clk = of_clk_get_by_name(timer, "cpu_1x");
-	if (IS_ERR(clk)) {
+	clksel = __raw_readl(timer_baseaddr + TTC_CLK_CNTRL_OFFSET);
+	clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK);
+	clk_cs = of_clk_get(timer, clksel);
+	if (IS_ERR(clk_cs)) {
+		pr_err("ERROR: timer input clock not found\n");
+		BUG();
+	}
+
+	clksel = __raw_readl(timer_baseaddr + 4 + TTC_CLK_CNTRL_OFFSET);
+	clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK);
+	clk_ce = of_clk_get(timer, clksel);
+	if (IS_ERR(clk_ce)) {
 		pr_err("ERROR: timer input clock not found\n");
 		BUG();
 	}
 
-	ttc_setup_clocksource(clk, timer_baseaddr);
-	ttc_setup_clockevent(clk, timer_baseaddr + 4, irq);
+	ttc_setup_clocksource(clk_cs, timer_baseaddr);
+	ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq);
 
 	pr_info("%s #0 at %p, irq=%d\n", timer->name, timer_baseaddr, irq);
 }
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 04a1f8f..d3fa947 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 
@@ -139,6 +140,16 @@
 #define XUARTPS_SR_RXTRIG	0x00000001 /* Rx Trigger */
 
 /**
+ * struct xuartps - device data
+ * @refclk	Reference clock
+ * @aperclk	APB clock
+ */
+struct xuartps {
+	struct clk		*refclk;
+	struct clk		*aperclk;
+};
+
+/**
  * xuartps_isr - Interrupt handler
  * @irq: Irq number
  * @dev_id: Id of the port
@@ -936,34 +947,55 @@ static int xuartps_probe(struct platform_device *pdev)
 	int rc;
 	struct uart_port *port;
 	struct resource *res, *res2;
-	struct clk *clk;
+	struct xuartps *xuartps_data;
 
-	clk = of_clk_get(pdev->dev.of_node, 0);
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "no clock specified\n");
-		return PTR_ERR(clk);
+	xuartps_data = kzalloc(sizeof(*xuartps_data), GFP_KERNEL);
+	if (!xuartps_data)
+		return -ENOMEM;
+
+	xuartps_data->aperclk = clk_get(&pdev->dev, "aper_clk");
+	if (IS_ERR(xuartps_data->aperclk)) {
+		dev_err(&pdev->dev, "aper_clk clock not found.\n");
+		rc = PTR_ERR(xuartps_data->aperclk);
+		goto err_out_free;
+	}
+	xuartps_data->refclk = clk_get(&pdev->dev, "ref_clk");
+	if (IS_ERR(xuartps_data->refclk)) {
+		dev_err(&pdev->dev, "ref_clk clock not found.\n");
+		rc = PTR_ERR(xuartps_data->refclk);
+		goto err_out_clk_put_aper;
 	}
 
-	rc = clk_prepare_enable(clk);
+	rc = clk_prepare_enable(xuartps_data->aperclk);
+	if (rc) {
+		dev_err(&pdev->dev, "Unable to enable APER clock.\n");
+		goto err_out_clk_put;
+	}
+	rc = clk_prepare_enable(xuartps_data->refclk);
 	if (rc) {
-		dev_err(&pdev->dev, "could not enable clock\n");
-		return -EBUSY;
+		dev_err(&pdev->dev, "Unable to enable device clock.\n");
+		goto err_out_clk_dis_aper;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
+	if (!res) {
+		rc = -ENODEV;
+		goto err_out_clk_disable;
+	}
 
 	res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res2)
-		return -ENODEV;
+	if (!res2) {
+		rc = -ENODEV;
+		goto err_out_clk_disable;
+	}
 
 	/* Initialize the port structure */
 	port = xuartps_get_port();
 
 	if (!port) {
 		dev_err(&pdev->dev, "Cannot get uart_port structure\n");
-		return -ENODEV;
+		rc = -ENODEV;
+		goto err_out_clk_disable;
 	} else {
 		/* Register the port.
 		 * This function also registers this device with the tty layer
@@ -972,18 +1004,31 @@ static int xuartps_probe(struct platform_device *pdev)
 		port->mapbase = res->start;
 		port->irq = res2->start;
 		port->dev = &pdev->dev;
-		port->uartclk = clk_get_rate(clk);
-		port->private_data = clk;
+		port->uartclk = clk_get_rate(xuartps_data->refclk);
+		port->private_data = xuartps_data;
 		dev_set_drvdata(&pdev->dev, port);
 		rc = uart_add_one_port(&xuartps_uart_driver, port);
 		if (rc) {
 			dev_err(&pdev->dev,
 				"uart_add_one_port() failed; err=%i\n", rc);
 			dev_set_drvdata(&pdev->dev, NULL);
-			return rc;
+			goto err_out_clk_disable;
 		}
 		return 0;
 	}
+
+err_out_clk_disable:
+	clk_disable_unprepare(xuartps_data->refclk);
+err_out_clk_dis_aper:
+	clk_disable_unprepare(xuartps_data->aperclk);
+err_out_clk_put:
+	clk_put(xuartps_data->refclk);
+err_out_clk_put_aper:
+	clk_put(xuartps_data->aperclk);
+err_out_free:
+	kfree(xuartps_data);
+
+	return rc;
 }
 
 /**
@@ -995,14 +1040,18 @@ static int xuartps_probe(struct platform_device *pdev)
 static int xuartps_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = dev_get_drvdata(&pdev->dev);
-	struct clk *clk = port->private_data;
+	struct xuartps *xuartps_data = port->private_data;
 	int rc;
 
 	/* Remove the xuartps port from the serial core */
 	rc = uart_remove_one_port(&xuartps_uart_driver, port);
 	dev_set_drvdata(&pdev->dev, NULL);
 	port->mapbase = 0;
-	clk_disable_unprepare(clk);
+	clk_disable_unprepare(xuartps_data->refclk);
+	clk_disable_unprepare(xuartps_data->aperclk);
+	clk_put(xuartps_data->refclk);
+	clk_put(xuartps_data->aperclk);
+	kfree(xuartps_data);
 	return rc;
 }
 
diff --git a/include/linux/clk/zynq.h b/include/linux/clk/zynq.h
index 56be7cd..e062d31 100644
--- a/include/linux/clk/zynq.h
+++ b/include/linux/clk/zynq.h
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2013 Xilinx Inc.
  * Copyright (C) 2012 National Instruments
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,6 +20,11 @@
 #ifndef __LINUX_CLK_ZYNQ_H_
 #define __LINUX_CLK_ZYNQ_H_
 
-void __init xilinx_zynq_clocks_init(void __iomem *slcr);
+#include <linux/spinlock.h>
 
+void zynq_clock_init(void __iomem *slcr);
+
+struct clk *clk_register_zynq_pll(const char *name, const char *parent,
+		void __iomem *pll_ctrl, void __iomem *pll_status, u8 lock_index,
+		spinlock_t *lock);
 #endif
-- 
1.8.2.2