[PATCH printk v4 00/39] reduce console_lock scope

[PATCH printk v4 00/39] reduce console_lock scope

[John Ogness]

This is v4 of a series to prepare for threaded/atomic
printing. v3 is here [0]. This series focuses on reducing the
scope of the BKL console_lock. It achieves this by switching to
SRCU and a dedicated mutex for console list iteration and
modification, respectively. The console_lock will no longer
offer this protection.

Also, during the review of v2 it came to our attention that
many console drivers are checking CON_ENABLED to see if they
are registered. Because this flag can change without
unregistering and because this flag does not represent an
atomic point when an (un)registration process is complete,
a new console_is_registered() function is introduced. This
function uses the console_list_lock to synchronize with the
(un)registration process to provide a reliable status.

All users of the console_lock for list iteration have been
modified. For the call sites where the console_lock is still
needed (for other reasons), comments are added to explain
exactly why the console_lock was needed.

All users of CON_ENABLED for registration status have been
modified to use console_is_registered(). Note that there are
still users of CON_ENABLED, but this is for legitimate purposes
about a registered console being able to print.

The base commit for this series is from Paul McKenney's RCU tree
and provides an NMI-safe SRCU implementation [1]. Without the
NMI-safe SRCU implementation, this series is not less safe than
mainline. But we will need the NMI-safe SRCU implementation for
atomic consoles anyway, so we might as well get it in
now. Especially since it _does_ increase the reliability for
mainline in the panic path.

Changes since v3:

general:

- Implement console_srcu_read_flags() and console_srcu_write_flags()
  to be used for console->flags access under the srcu_read_lock or
  console_list_lock, respectively. The functions document their
  relationship to one another and use data_race(), READ_ONCE(), and
  WRITE_ONCE() macros to annotate their relationship. They also make
  use of lockdep to warn if used in improper contexts.

- Replace all console_is_enabled() usage with
  console_srcu_read_flags() (all were under the srcu_read_lock).

serial_core:

- For uart_console_registered(), check uart_console() before taking
  the console_list_lock to avoid unnecessary lock contention for
  non-console ports.

m68k/emu/nfcon:

- Only explicitly enable the console if registering via debug=nfcon.

tty/serial/sh-sci:

- Add comments about why @options will always be NULL for the
  earlyprintk console.

kdb:

- Add comments explaining the expectations for console drivers to
  work correctly.

printk:

- Some code sites under SRCU were checking flags directly. Use
  console_srcu_read_flags() instead.

- In register_console() rename bootcon_enabled/realcon_enabled to
  bootcon_registered/realcon_registered to avoid confusion.

- In register_console() only check for boot console sequences if a
  boot console is registered and !keep_bootcon. In this case, also
  take the console_lock to guarantee safe access to console->seq.

- In console_force_preferred_locked() use hlist_del_rcu() instead of
  hlist_del_init_rcu() so that there is never a window where the
  console can be viewed as unregistered.

John Ogness

[0] https://lore.kernel.org/lkml/20221107141638.3790965-1-john.ogness@linutronix.de
[1] https://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git/log/?h=srcunmisafe.2022.11.09a

John Ogness (37):
  printk: Prepare for SRCU console list protection
  printk: register_console: use "registered" for variable names
  printk: fix setting first seq for consoles
  um: kmsg_dump: only dump when no output console available
  tty: serial: kgdboc: document console_lock usage
  tty: tty_io: document console_lock usage
  proc: consoles: document console_lock usage
  printk: introduce console_list_lock
  console: introduce wrappers to read/write console flags
  um: kmsg_dumper: use srcu console list iterator
  kdb: use srcu console list iterator
  printk: console_flush_all: use srcu console list iterator
  printk: __pr_flush: use srcu console list iterator
  printk: console_is_usable: use console_srcu_read_flags
  printk: console_unblank: use srcu console list iterator
  printk: console_flush_on_panic: use srcu console list iterator
  printk: console_device: use srcu console list iterator
  console: introduce console_is_registered()
  serial_core: replace uart_console_enabled() with
    uart_console_registered()
  tty: nfcon: use console_is_registered()
  efi: earlycon: use console_is_registered()
  tty: hvc: use console_is_registered()
  tty: serial: earlycon: use console_is_registered()
  tty: serial: pic32_uart: use console_is_registered()
  tty: serial: samsung_tty: use console_is_registered()
  tty: serial: xilinx_uartps: use console_is_registered()
  usb: early: xhci-dbc: use console_is_registered()
  netconsole: avoid CON_ENABLED misuse to track registration
  printk, xen: fbfront: create/use safe function for forcing preferred
  tty: tty_io: use console_list_lock for list synchronization
  proc: consoles: use console_list_lock for list iteration
  tty: serial: kgdboc: use srcu console list iterator
  tty: serial: kgdboc: use console_list_lock for list traversal
  tty: serial: kgdboc: synchronize tty_find_polling_driver() and
    register_console()
  tty: serial: kgdboc: use console_list_lock to trap exit
  printk: relieve console_lock of list synchronization duties
  tty: serial: sh-sci: use setup() callback for early console

Thomas Gleixner (2):
  serial: kgdboc: Lock console list in probe function
  printk: Convert console_drivers list to hlist

 .clang-format                       |   1 +
 arch/m68k/emu/nfcon.c               |   9 +-
 arch/um/kernel/kmsg_dump.c          |  24 +-
 drivers/firmware/efi/earlycon.c     |   8 +-
 drivers/net/netconsole.c            |  21 +-
 drivers/tty/hvc/hvc_console.c       |   4 +-
 drivers/tty/serial/8250/8250_core.c |   2 +-
 drivers/tty/serial/earlycon.c       |   4 +-
 drivers/tty/serial/kgdboc.c         |  46 ++-
 drivers/tty/serial/pic32_uart.c     |   4 +-
 drivers/tty/serial/samsung_tty.c    |   2 +-
 drivers/tty/serial/serial_core.c    |  14 +-
 drivers/tty/serial/sh-sci.c         |  20 +-
 drivers/tty/serial/xilinx_uartps.c  |   2 +-
 drivers/tty/tty_io.c                |  18 +-
 drivers/usb/early/xhci-dbc.c        |   2 +-
 drivers/video/fbdev/xen-fbfront.c   |  12 +-
 fs/proc/consoles.c                  |  21 +-
 include/linux/console.h             | 129 +++++++-
 include/linux/serial_core.h         |  10 +-
 kernel/debug/kdb/kdb_io.c           |  18 +-
 kernel/printk/printk.c              | 459 +++++++++++++++++++++-------
 22 files changed, 648 insertions(+), 182 deletions(-)


base-commit: f733615e39aa2d6ddeef33b7b2c9aa6a5a2c2785
-- 
2.30.2

[PATCH printk v4 01/39] serial: kgdboc: Lock console list in probe function

[John Ogness]

From: Thomas Gleixner <tglx@linutronix.de>

Unprotected list walks are not necessarily safe.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
---
 drivers/tty/serial/kgdboc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index 7aa37be3216a..e76f0186c335 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -193,6 +193,7 @@ static int configure_kgdboc(void)
 	if (!p)
 		goto noconfig;
 
+	console_lock();
 	for_each_console(cons) {
 		int idx;
 		if (cons->device && cons->device(cons, &idx) == p &&
@@ -201,6 +202,7 @@ static int configure_kgdboc(void)
 			break;
 		}
 	}
+	console_unlock();
 
 	kgdb_tty_driver = p;
 	kgdb_tty_line = tty_line;
-- 
2.30.2

[PATCH printk v4 07/39] tty: serial: kgdboc: document console_lock usage

[John Ogness]

kgdboc_earlycon_init() uses the console_lock to ensure that no consoles
are unregistered until the kgdboc_earlycon is setup. This is necessary
because the trapping of the exit() callback assumes that the exit()
callback is not called before the trap is setup.

Explicitly document this non-typical console_lock usage.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
---
 drivers/tty/serial/kgdboc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index e76f0186c335..5be381003e58 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -530,6 +530,14 @@ static int __init kgdboc_earlycon_init(char *opt)
 	 * Look for a matching console, or if the name was left blank just
 	 * pick the first one we find.
 	 */
+
+	/*
+	 * Hold the console_lock to guarantee that no consoles are
+	 * unregistered until the kgdboc_earlycon setup is complete.
+	 * Trapping the exit() callback relies on exit() not being
+	 * called until the trap is setup. This also allows safe
+	 * traversal of the console list and race-free reading of @flags.
+	 */
 	console_lock();
 	for_each_console(con) {
 		if (con->write && con->read &&
-- 
2.30.2

[PATCH printk v4 21/39] serial_core: replace uart_console_enabled() with uart_console_registered()

[John Ogness]

All users of uart_console_enabled() really want to know if a console
is registered. It is not reliable to check for CON_ENABLED in order
to identify if a console is registered. Use console_is_registered()
instead.

A _locked() variant is provided because uart_set_options() is always
called with the console_list_lock held and must check if a console
is registered in order to synchronize with kgdboc.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
---
 drivers/tty/serial/8250/8250_core.c |  2 +-
 drivers/tty/serial/pic32_uart.c     |  2 +-
 drivers/tty/serial/serial_core.c    | 14 +++++++-------
 include/linux/serial_core.h         | 10 ++++++++--
 4 files changed, 17 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 94fbf0add2ce..74568292186f 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -565,7 +565,7 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 
 		up->port.dev = dev;
 
-		if (uart_console_enabled(&up->port))
+		if (uart_console_registered(&up->port))
 			pm_runtime_get_sync(up->port.dev);
 
 		serial8250_apply_quirks(up);
diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index 2beada66c824..1183b2a26539 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -919,7 +919,7 @@ static int pic32_uart_probe(struct platform_device *pdev)
 	}
 
 #ifdef CONFIG_SERIAL_PIC32_CONSOLE
-	if (uart_console_enabled(port)) {
+	if (uart_console_registered(port)) {
 		/* The peripheral clock has been enabled by console_setup,
 		 * so disable it till the port is used.
 		 */
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 179ee199df34..b9fbbee598b8 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2223,11 +2223,11 @@ uart_set_options(struct uart_port *port, struct console *co,
 	/*
 	 * Ensure that the serial-console lock is initialised early.
 	 *
-	 * Note that the console-enabled check is needed because of kgdboc,
-	 * which can end up calling uart_set_options() for an already enabled
+	 * Note that the console-registered check is needed because
+	 * kgdboc can call uart_set_options() for an already registered
 	 * console via tty_find_polling_driver() and uart_poll_init().
 	 */
-	if (!uart_console_enabled(port) && !port->console_reinit)
+	if (!uart_console_registered_locked(port) && !port->console_reinit)
 		uart_port_spin_lock_init(port);
 
 	memset(&termios, 0, sizeof(struct ktermios));
@@ -2573,7 +2573,7 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 		 * successfully registered yet, try to re-register it.
 		 * It may be that the port was not available.
 		 */
-		if (port->cons && !(port->cons->flags & CON_ENABLED))
+		if (port->cons && !console_is_registered(port->cons))
 			register_console(port->cons);
 
 		/*
@@ -2956,7 +2956,7 @@ static ssize_t console_show(struct device *dev,
 	mutex_lock(&port->mutex);
 	uport = uart_port_check(state);
 	if (uport)
-		console = uart_console_enabled(uport);
+		console = uart_console_registered(uport);
 	mutex_unlock(&port->mutex);
 
 	return sprintf(buf, "%c\n", console ? 'Y' : 'N');
@@ -2978,7 +2978,7 @@ static ssize_t console_store(struct device *dev,
 	mutex_lock(&port->mutex);
 	uport = uart_port_check(state);
 	if (uport) {
-		oldconsole = uart_console_enabled(uport);
+		oldconsole = uart_console_registered(uport);
 		if (oldconsole && !newconsole) {
 			ret = unregister_console(uport->cons);
 		} else if (!oldconsole && newconsole) {
@@ -3086,7 +3086,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
 	 * If this port is in use as a console then the spinlock is already
 	 * initialised.
 	 */
-	if (!uart_console_enabled(uport))
+	if (!uart_console_registered(uport))
 		uart_port_spin_lock_init(uport);
 
 	if (uport->cons && uport->dev)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index d657f2a42a7b..91871464b99d 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -743,9 +743,15 @@ static const bool earlycon_acpi_spcr_enable EARLYCON_USED_OR_UNUSED;
 static inline int setup_earlycon(char *buf) { return 0; }
 #endif
 
-static inline bool uart_console_enabled(struct uart_port *port)
+/* Variant of uart_console_registered() when the console_list_lock is held. */
+static inline bool uart_console_registered_locked(struct uart_port *port)
 {
-	return uart_console(port) && (port->cons->flags & CON_ENABLED);
+	return uart_console(port) && console_is_registered_locked(port->cons);
+}
+
+static inline bool uart_console_registered(struct uart_port *port)
+{
+	return uart_console(port) && console_is_registered(port->cons);
 }
 
 struct uart_port *uart_get_console(struct uart_port *ports, int nr,
-- 
2.30.2

[PATCH printk v4 25/39] tty: serial: earlycon: use console_is_registered()

[John Ogness]

It is not reliable to check for CON_ENABLED in order to identify if a
console is registered. Use console_is_registered() instead.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
---
 drivers/tty/serial/earlycon.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index a5f380584cda..4f6e9bf57169 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -181,7 +181,7 @@ int __init setup_earlycon(char *buf)
 	if (!buf || !buf[0])
 		return -EINVAL;
 
-	if (early_con.flags & CON_ENABLED)
+	if (console_is_registered(&early_con))
 		return -EALREADY;
 
 again:
@@ -253,7 +253,7 @@ int __init of_setup_earlycon(const struct earlycon_id *match,
 	bool big_endian;
 	u64 addr;
 
-	if (early_con.flags & CON_ENABLED)
+	if (console_is_registered(&early_con))
 		return -EALREADY;
 
 	spin_lock_init(&port->lock);
-- 
2.30.2

[PATCH printk v4 26/39] tty: serial: pic32_uart: use console_is_registered()

[John Ogness]

It is not reliable to check for CON_ENABLED in order to identify if a
console is registered. Use console_is_registered() instead.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
---
 drivers/tty/serial/pic32_uart.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index 1183b2a26539..c38754d593ca 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -843,7 +843,7 @@ console_initcall(pic32_console_init);
  */
 static int __init pic32_late_console_init(void)
 {
-	if (!(pic32_console.flags & CON_ENABLED))
+	if (!console_is_registered(&pic32_console))
 		register_console(&pic32_console);
 
 	return 0;
-- 
2.30.2

[PATCH printk v4 27/39] tty: serial: samsung_tty: use console_is_registered()

[John Ogness]

It is not reliable to check for CON_ENABLED in order to identify if a
console is registered. Use console_is_registered() instead.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
---
 drivers/tty/serial/samsung_tty.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 77d1363029f5..9c252c9ca95a 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -1732,7 +1732,7 @@ static void __init s3c24xx_serial_register_console(void)
 
 static void s3c24xx_serial_unregister_console(void)
 {
-	if (s3c24xx_serial_console.flags & CON_ENABLED)
+	if (console_is_registered(&s3c24xx_serial_console))
 		unregister_console(&s3c24xx_serial_console);
 }
 
-- 
2.30.2

[PATCH printk v4 28/39] tty: serial: xilinx_uartps: use console_is_registered()

[John Ogness]

It is not reliable to check for CON_ENABLED in order to identify if a
console is registered. Use console_is_registered() instead.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
---
 drivers/tty/serial/xilinx_uartps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 2eff7cff57c4..0cbd1892c53b 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1631,7 +1631,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
 	/* This is not port which is used for console that's why clean it up */
 	if (console_port == port &&
-	    !(cdns_uart_uart_driver.cons->flags & CON_ENABLED)) {
+	    !console_is_registered(cdns_uart_uart_driver.cons)) {
 		console_port = NULL;
 		cdns_uart_console.index = -1;
 	}
-- 
2.30.2

[PATCH printk v4 34/39] tty: serial: kgdboc: use srcu console list iterator

[John Ogness]

Use srcu console list iteration for safe console list traversal.
Note that this is a preparatory change for when console_lock no
longer provides synchronization for the console list.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
---
 drivers/tty/serial/kgdboc.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index 5be381003e58..c6df9ef34099 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -451,6 +451,7 @@ static void kgdboc_earlycon_pre_exp_handler(void)
 {
 	struct console *con;
 	static bool already_warned;
+	int cookie;
 
 	if (already_warned)
 		return;
@@ -463,9 +464,14 @@ static void kgdboc_earlycon_pre_exp_handler(void)
 	 * serial drivers might be OK with this, print a warning once per
 	 * boot if we detect this case.
 	 */
-	for_each_console(con)
+	cookie = console_srcu_read_lock();
+	for_each_console_srcu(con) {
 		if (con == kgdboc_earlycon_io_ops.cons)
-			return;
+			break;
+	}
+	console_srcu_read_unlock(cookie);
+	if (con)
+		return;
 
 	already_warned = true;
 	pr_warn("kgdboc_earlycon is still using bootconsole\n");
-- 
2.30.2

[PATCH printk v4 35/39] tty: serial: kgdboc: use console_list_lock for list traversal

[John Ogness]

configure_kgdboc() uses the console_lock for console list iteration. Use
the console_list_lock instead because list synchronization responsibility
will be removed from the console_lock in a later change.

The SRCU iterator could have been used here, but a later change will
relocate the locking of the console_list_lock to also provide
synchronization against register_console().

Note, the console_lock is still needed to serialize the device()
callback with other console operations.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
---
 drivers/tty/serial/kgdboc.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index c6df9ef34099..82b4b4d67823 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -193,7 +193,16 @@ static int configure_kgdboc(void)
 	if (!p)
 		goto noconfig;
 
+	/* For safe traversal of the console list. */
+	console_list_lock();
+
+	/*
+	 * Take console_lock to serialize device() callback with
+	 * other console operations. For example, fg_console is
+	 * modified under console_lock when switching vt.
+	 */
 	console_lock();
+
 	for_each_console(cons) {
 		int idx;
 		if (cons->device && cons->device(cons, &idx) == p &&
@@ -202,8 +211,11 @@ static int configure_kgdboc(void)
 			break;
 		}
 	}
+
 	console_unlock();
 
+	console_list_unlock();
+
 	kgdb_tty_driver = p;
 	kgdb_tty_line = tty_line;
 
-- 
2.30.2

[PATCH printk v4 36/39] tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()

[John Ogness]

Calling tty_find_polling_driver() can lead to uart_set_options() being
called (via the poll_init() callback of tty_operations) to configure the
uart. But uart_set_options() can also be called by register_console()
(via the setup() callback of console).

Take the console_list_lock to synchronize against register_console() and
also use it for console list traversal. This also ensures the console list
cannot change until the polling console has been chosen.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
---
 drivers/tty/serial/kgdboc.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index 82b4b4d67823..8c2b7ccdfebf 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -189,12 +189,20 @@ static int configure_kgdboc(void)
 	if (kgdboc_register_kbd(&cptr))
 		goto do_register;
 
+	/*
+	 * tty_find_polling_driver() can call uart_set_options()
+	 * (via poll_init) to configure the uart. Take the console_list_lock
+	 * in order to synchronize against register_console(), which can also
+	 * configure the uart via uart_set_options(). This also allows safe
+	 * traversal of the console list.
+	 */
+	console_list_lock();
+
 	p = tty_find_polling_driver(cptr, &tty_line);
-	if (!p)
+	if (!p) {
+		console_list_unlock();
 		goto noconfig;
-
-	/* For safe traversal of the console list. */
-	console_list_lock();
+	}
 
 	/*
 	 * Take console_lock to serialize device() callback with
-- 
2.30.2

[PATCH printk v4 37/39] tty: serial: kgdboc: use console_list_lock to trap exit

[John Ogness]

kgdboc_earlycon_init() uses the console_lock to ensure that no consoles
are unregistered until the kgdboc_earlycon is setup. The console_list_lock
should be used instead because list synchronization responsibility will
be removed from the console_lock in a later change.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
---
 drivers/tty/serial/kgdboc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index 8c2b7ccdfebf..a3ed9b34e2ab 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -558,13 +558,13 @@ static int __init kgdboc_earlycon_init(char *opt)
 	 */
 
 	/*
-	 * Hold the console_lock to guarantee that no consoles are
+	 * Hold the console_list_lock to guarantee that no consoles are
 	 * unregistered until the kgdboc_earlycon setup is complete.
 	 * Trapping the exit() callback relies on exit() not being
 	 * called until the trap is setup. This also allows safe
 	 * traversal of the console list and race-free reading of @flags.
 	 */
-	console_lock();
+	console_list_lock();
 	for_each_console(con) {
 		if (con->write && con->read &&
 		    (con->flags & (CON_BOOT | CON_ENABLED)) &&
@@ -606,7 +606,7 @@ static int __init kgdboc_earlycon_init(char *opt)
 	}
 
 unlock:
-	console_unlock();
+	console_list_unlock();
 
 	/* Non-zero means malformed option so we always return zero */
 	return 0;
-- 
2.30.2

[PATCH printk v4 39/39] tty: serial: sh-sci: use setup() callback for early console

[John Ogness]

When setting up the early console, the setup() callback of the
regular console is used. It is called manually before registering
the early console instead of providing a setup() callback for the
early console. This is probably because the early setup needs a
different @options during the early stage.

The issue here is that the setup() callback is called without the
console_list_lock held and functions such as uart_set_options()
expect that.

Rather than manually calling the setup() function before registering,
provide an early console setup() callback that will use the different
early options. This ensures that the error checking, ordering, and
locking context when setting up the early console are correct.

Since this early console can only be registered via the earlyprintk=
parameter, the @options argument of the setup() callback will always
be NULL. Rather than simply ignoring the argument, add a WARN_ON()
to get our attention in case the setup() callback semantics should
change in the future.

Note that technically the current implementation works because it is
only used in early boot. And since the early console setup is
performed before registering, it cannot race with anything and thus
does not need any locking. However, longterm maintenance is easier
when drivers rely on the subsystem API rather than manually
implementing steps that could cause breakage in the future.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/tty/serial/sh-sci.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 62f773286d44..76452fe2af86 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -3054,15 +3054,29 @@ static struct console serial_console = {
 };
 
 #ifdef CONFIG_SUPERH
+static char early_serial_buf[32];
+
+static int early_serial_console_setup(struct console *co, char *options)
+{
+	/*
+	 * This early console is always registered using the earlyprintk=
+	 * parameter, which does not call add_preferred_console(). Thus
+	 * @options is always NULL and the options for this early console
+	 * are passed using a custom buffer.
+	 */
+	WARN_ON(options);
+
+	return serial_console_setup(co, early_serial_buf);
+}
+
 static struct console early_serial_console = {
 	.name           = "early_ttySC",
 	.write          = serial_console_write,
+	.setup		= early_serial_console_setup,
 	.flags          = CON_PRINTBUFFER,
 	.index		= -1,
 };
 
-static char early_serial_buf[32];
-
 static int sci_probe_earlyprintk(struct platform_device *pdev)
 {
 	const struct plat_sci_port *cfg = dev_get_platdata(&pdev->dev);
@@ -3074,8 +3088,6 @@ static int sci_probe_earlyprintk(struct platform_device *pdev)
 
 	sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true);
 
-	serial_console_setup(&early_serial_console, early_serial_buf);
-
 	if (!strstr(early_serial_buf, "keep"))
 		early_serial_console.flags |= CON_BOOT;
 
-- 
2.30.2

Re: [PATCH printk v4 34/39] tty: serial: kgdboc: use srcu console list iterator

[Petr Mladek]

On Mon 2022-11-14 17:35:27, John Ogness wrote:
> Use srcu console list iteration for safe console list traversal.
> Note that this is a preparatory change for when console_lock no
> longer provides synchronization for the console list.
> 
> Signed-off-by: John Ogness <john.ogness@linutronix.de>

Reviewed-by: Petr Mladek <pmladek@suse.com>

Best Regards,
Petr

Re: [PATCH printk v4 35/39] tty: serial: kgdboc: use console_list_lock for list traversal

[Petr Mladek]

On Mon 2022-11-14 17:35:28, John Ogness wrote:
> configure_kgdboc() uses the console_lock for console list iteration. Use
> the console_list_lock instead because list synchronization responsibility
> will be removed from the console_lock in a later change.
> 
> The SRCU iterator could have been used here, but a later change will
> relocate the locking of the console_list_lock to also provide
> synchronization against register_console().
> 
> Note, the console_lock is still needed to serialize the device()
> callback with other console operations.
> 
> Signed-off-by: John Ogness <john.ogness@linutronix.de>

Reviewed-by: Petr Mladek <pmladek@suse.com>

Best Regards,
Petr

Re: [PATCH printk v4 39/39] tty: serial: sh-sci: use setup() callback for early console

[Petr Mladek]

On Mon 2022-11-14 17:35:32, John Ogness wrote:
> When setting up the early console, the setup() callback of the
> regular console is used. It is called manually before registering
> the early console instead of providing a setup() callback for the
> early console. This is probably because the early setup needs a
> different @options during the early stage.
> 
> The issue here is that the setup() callback is called without the
> console_list_lock held and functions such as uart_set_options()
> expect that.
> 
> Rather than manually calling the setup() function before registering,
> provide an early console setup() callback that will use the different
> early options. This ensures that the error checking, ordering, and
> locking context when setting up the early console are correct.
> 
> Since this early console can only be registered via the earlyprintk=
> parameter, the @options argument of the setup() callback will always
> be NULL. Rather than simply ignoring the argument, add a WARN_ON()
> to get our attention in case the setup() callback semantics should
> change in the future.
> 
> Note that technically the current implementation works because it is
> only used in early boot. And since the early console setup is
> performed before registering, it cannot race with anything and thus
> does not need any locking. However, longterm maintenance is easier
> when drivers rely on the subsystem API rather than manually
> implementing steps that could cause breakage in the future.
> 
> Signed-off-by: John Ogness <john.ogness@linutronix.de>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Reviewed-by: Petr Mladek <pmladek@suse.com>

Best Regards,
Petr