* Re: [PATCH 00/10] r8a7790 PFC pinctrl and GPIO improvements
2013-04-08 9:36 [PATCH 00/10] r8a7790 PFC pinctrl and GPIO improvements Laurent Pinchart
@ 2013-04-09 12:13 ` Simon Horman
2013-04-09 13:11 ` Laurent Pinchart
2013-04-11 8:05 ` Simon Horman
2 siblings, 0 replies; 4+ messages in thread
From: Simon Horman @ 2013-04-09 12:13 UTC (permalink / raw)
To: linux-sh
On Mon, Apr 08, 2013 at 11:36:12AM +0200, Laurent Pinchart wrote:
> Hello,
>
> This patch series adds pinctrl support to the r8a7790 PFC driver. Only the
> ETH, INTC and SCIF pin groups are currently defined, more will be added later
> as needed.
>
> The series also removes the r8a7790 PFC GPIO code and uses the separate RCar
> GPIO driver instead.
>
> The patches are based on Simon's pinmux branch plus Magnus' r8a7790 PFC
> patches posted today ("[PATCH 00/02] sh-pfc: Initial r8a7790 PFC support"),
> except for the last patch that requires Lager board support as a prerequisite.
>
> Simon, is it too late to get this series merged in v3.10 ? We can delay the
> last patch to v3.11 if that helps.
As mentioned elsewhere I'd prefer to delay the entire series for v3.11.
Actually, at this point I think I would like to delay all non-fixes for v3.11.
Magnus could you review this series?
>
> Laurent Pinchart (10):
> gpio-rcar: Add RCAR_GP_PIN macro
> sh-pfc: r8a7790: Add ETH pin groups and functions
> sh-pfc: r8a7790: Add INTC pin groups and functions
> sh-pfc: r8a7790: Add SCIF, SCIFA and SCIFB pin groups and functions
> ARM: shmobile: r8a7790: Register GPIO devices
> sh-pfc: r8a7790: Remove GPIO data
> sh-pfc: r8a7790: Remove function GPIOs
> sh-pfc: r8a7790: Don't use GPIO enum entries
> ARM: shmobile: r8a7790: Remove all GPIOs
> ARM: shmobile: lager: Initialize pinmux
>
> arch/arm/mach-shmobile/board-lager.c | 15 +
> arch/arm/mach-shmobile/include/mach/r8a7790.h | 383 --------
> arch/arm/mach-shmobile/setup-r8a7790.c | 35 +-
> drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 1280 +++++++++++++++----------
> include/linux/platform_data/gpio-rcar.h | 2 +
> 5 files changed, 823 insertions(+), 892 deletions(-)
>
> --
> Regards,
>
> Laurent Pinchart
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH 00/10] r8a7790 PFC pinctrl and GPIO improvements
2013-04-08 9:36 [PATCH 00/10] r8a7790 PFC pinctrl and GPIO improvements Laurent Pinchart
2013-04-09 12:13 ` Simon Horman
@ 2013-04-09 13:11 ` Laurent Pinchart
2013-04-11 8:05 ` Simon Horman
2 siblings, 0 replies; 4+ messages in thread
From: Laurent Pinchart @ 2013-04-09 13:11 UTC (permalink / raw)
To: linux-sh
Hi Simon,
On Tuesday 09 April 2013 21:13:17 Simon Horman wrote:
> On Mon, Apr 08, 2013 at 11:36:12AM +0200, Laurent Pinchart wrote:
> > Hello,
> >
> > This patch series adds pinctrl support to the r8a7790 PFC driver. Only the
> > ETH, INTC and SCIF pin groups are currently defined, more will be added
> > later as needed.
> >
> > The series also removes the r8a7790 PFC GPIO code and uses the separate
> > RCar GPIO driver instead.
> >
> > The patches are based on Simon's pinmux branch plus Magnus' r8a7790 PFC
> > patches posted today ("[PATCH 00/02] sh-pfc: Initial r8a7790 PFC
> > support"),
> > except for the last patch that requires Lager board support as a
> > prerequisite.
> >
> > Simon, is it too late to get this series merged in v3.10 ? We can delay
> > the
> > last patch to v3.11 if that helps.
>
> As mentioned elsewhere I'd prefer to delay the entire series for v3.11.
> Actually, at this point I think I would like to delay all non-fixes for
> v3.11.
That's fine with me.
> Magnus could you review this series?
>
> > Laurent Pinchart (10):
> > gpio-rcar: Add RCAR_GP_PIN macro
> > sh-pfc: r8a7790: Add ETH pin groups and functions
> > sh-pfc: r8a7790: Add INTC pin groups and functions
> > sh-pfc: r8a7790: Add SCIF, SCIFA and SCIFB pin groups and functions
> > ARM: shmobile: r8a7790: Register GPIO devices
> > sh-pfc: r8a7790: Remove GPIO data
> > sh-pfc: r8a7790: Remove function GPIOs
> > sh-pfc: r8a7790: Don't use GPIO enum entries
> > ARM: shmobile: r8a7790: Remove all GPIOs
> > ARM: shmobile: lager: Initialize pinmux
> >
> > arch/arm/mach-shmobile/board-lager.c | 15 +
> > arch/arm/mach-shmobile/include/mach/r8a7790.h | 383 --------
> > arch/arm/mach-shmobile/setup-r8a7790.c | 35 +-
> > drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 1280 ++++++++++++--------
> > include/linux/platform_data/gpio-rcar.h | 2 +
> > 5 files changed, 823 insertions(+), 892 deletions(-)
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH 00/10] r8a7790 PFC pinctrl and GPIO improvements
2013-04-08 9:36 [PATCH 00/10] r8a7790 PFC pinctrl and GPIO improvements Laurent Pinchart
2013-04-09 12:13 ` Simon Horman
2013-04-09 13:11 ` Laurent Pinchart
@ 2013-04-11 8:05 ` Simon Horman
2 siblings, 0 replies; 4+ messages in thread
From: Simon Horman @ 2013-04-11 8:05 UTC (permalink / raw)
To: linux-sh
On 月, 4月 08, 2013 at 11:36:12午前 +0200, Laurent Pinchart wrote:
> Hello,
>
> This patch series adds pinctrl support to the r8a7790 PFC driver. Only the
> ETH, INTC and SCIF pin groups are currently defined, more will be added later
> as needed.
>
> The series also removes the r8a7790 PFC GPIO code and uses the separate RCar
> GPIO driver instead.
>
> The patches are based on Simon's pinmux branch plus Magnus' r8a7790 PFC
> patches posted today ("[PATCH 00/02] sh-pfc: Initial r8a7790 PFC support"),
> except for the last patch that requires Lager board support as a prerequisite.
>
> Simon, is it too late to get this series merged in v3.10 ? We can delay the
> last patch to v3.11 if that helps.
>
> Laurent Pinchart (10):
> gpio-rcar: Add RCAR_GP_PIN macro
> sh-pfc: r8a7790: Add ETH pin groups and functions
> sh-pfc: r8a7790: Add INTC pin groups and functions
> sh-pfc: r8a7790: Add SCIF, SCIFA and SCIFB pin groups and functions
> ARM: shmobile: r8a7790: Register GPIO devices
> sh-pfc: r8a7790: Remove GPIO data
> sh-pfc: r8a7790: Remove function GPIOs
> sh-pfc: r8a7790: Don't use GPIO enum entries
> ARM: shmobile: r8a7790: Remove all GPIOs
> ARM: shmobile: lager: Initialize pinmux
>
> arch/arm/mach-shmobile/board-lager.c | 15 +
> arch/arm/mach-shmobile/include/mach/r8a7790.h | 383 --------
> arch/arm/mach-shmobile/setup-r8a7790.c | 35 +-
> drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 1280 +++++++++++++++----------
> include/linux/platform_data/gpio-rcar.h | 2 +
> 5 files changed, 823 insertions(+), 892 deletions(-)
Thanks,
I have queued up the following patches for v3.11 in the pinmux branch:
gpio-rcar: Add RCAR_GP_PIN macro
sh-pfc: r8a7790: Add ETH pin groups and functions
sh-pfc: r8a7790: Add INTC pin groups and functions
sh-pfc: r8a7790: Add SCIF, SCIFA and SCIFB pin groups and functions
sh-pfc: r8a7790: Remove GPIO data
sh-pfc: r8a7790: Remove function GPIOs
sh-pfc: r8a7790: Don't use GPIO enum entries
I have merged the pinmux branch into the soc-r8a7990 branch and
queued up the following patches for v3.11 in there.
ARM: shmobile: r8a7790: Register GPIO devices
ARM: shmobile: r8a7790: Remove all GPIOs
I have merged the soc-r8a7990 branch into the boards-lager branch and
queued up the following patches for v3.11 in there.
ARM: shmobile: lager: Initialize pinmux
^ permalink raw reply [flat|nested] 4+ messages in thread