* [PATCH] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code
@ 2013-12-12 17:56 Ben Dooks
2013-12-12 18:04 ` Sergei Shtylyov
` (5 more replies)
0 siblings, 6 replies; 7+ messages in thread
From: Ben Dooks @ 2013-12-12 17:56 UTC (permalink / raw)
To: linux-sh
The PCI sub-system is not enabled by default on ARM and on certain
Renesas devices the build does not select it. This means that there
are configurations that do not allow the AHB-PCI bridge used for the
USB sub-systems to be built.
For the R8A7790, R8A7791 and EMEV-2 select MIGHT_HAVE_PCI to allow the
PCI drivers to be built. Also select MIGHT_HAVE_PCI for the multi-config
where there may be many Reneasas devices selected.
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
CC: Linux SH List <linux-sh@vger.kernel.org>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
arch/arm/mach-shmobile/Kconfig | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3e57d45..010d2a6 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -12,6 +12,7 @@ config ARCH_SHMOBILE_MULTI
select HAVE_SMP
select ARM_GIC
select MIGHT_HAVE_CACHE_L2X0
+ select MIGHT_HAVE_PCI
select NO_IOPORT
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
@@ -101,6 +102,7 @@ config ARCH_R8A7779
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select SH_CLK_CPG
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
@@ -111,6 +113,7 @@ config ARCH_R8A7790
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
@@ -127,6 +130,7 @@ config ARCH_EMEV2
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select USE_OF
select AUTO_ZRELADDR
--
1.8.5.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code
2013-12-12 17:56 [PATCH] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code Ben Dooks
@ 2013-12-12 18:04 ` Sergei Shtylyov
2013-12-12 18:10 ` Ben Dooks
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Sergei Shtylyov @ 2013-12-12 18:04 UTC (permalink / raw)
To: linux-sh
Hello.
On 12/12/2013 08:56 PM, Ben Dooks wrote:
> The PCI sub-system is not enabled by default on ARM and on certain
> Renesas devices the build does not select it. This means that there
> are configurations that do not allow the AHB-PCI bridge used for the
> USB sub-systems to be built.
> For the R8A7790, R8A7791 and EMEV-2 select MIGHT_HAVE_PCI to allow the
> PCI drivers to be built. Also select MIGHT_HAVE_PCI for the multi-config
> where there may be many Reneasas devices selected.
> Cc: Simon Horman <horms@verge.net.au>
> Cc: Magnus Damm <magnus.damm@gmail.com>
> CC: Linux SH List <linux-sh@vger.kernel.org>
> Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> ---
> arch/arm/mach-shmobile/Kconfig | 4 ++++
> 1 file changed, 4 insertions(+)
> diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
> index 3e57d45..010d2a6 100644
> --- a/arch/arm/mach-shmobile/Kconfig
> +++ b/arch/arm/mach-shmobile/Kconfig
[...]
> @@ -101,6 +102,7 @@ config ARCH_R8A7779
> select ARCH_WANT_OPTIONAL_GPIOLIB
> select ARM_GIC
> select CPU_V7
> + select MIGHT_HAVE_PCI
> select SH_CLK_CPG
> select USB_ARCH_HAS_EHCI
> select USB_ARCH_HAS_OHCI
Er, this is R8A7779 section. This SoC doesn't have PCI-AHB bridge.
> @@ -111,6 +113,7 @@ config ARCH_R8A7790
> select ARCH_WANT_OPTIONAL_GPIOLIB
> select ARM_GIC
> select CPU_V7
> + select MIGHT_HAVE_PCI
> select SH_CLK_CPG
> select RENESAS_IRQC
>
R8A7791 section is contrarywise missing. BTW, there's stray letter 'c'
before that section.
WBR, Sergei
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code
2013-12-12 17:56 [PATCH] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code Ben Dooks
2013-12-12 18:04 ` Sergei Shtylyov
@ 2013-12-12 18:10 ` Ben Dooks
2013-12-12 18:11 ` Ben Dooks
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Ben Dooks @ 2013-12-12 18:10 UTC (permalink / raw)
To: linux-sh
On 12/12/13 19:04, Sergei Shtylyov wrote:
> Hello.
>
> On 12/12/2013 08:56 PM, Ben Dooks wrote:
>
>> The PCI sub-system is not enabled by default on ARM and on certain
>> Renesas devices the build does not select it. This means that there
>> are configurations that do not allow the AHB-PCI bridge used for the
>> USB sub-systems to be built.
>
>> For the R8A7790, R8A7791 and EMEV-2 select MIGHT_HAVE_PCI to allow the
>> PCI drivers to be built. Also select MIGHT_HAVE_PCI for the multi-config
>> where there may be many Reneasas devices selected.
>
>> Cc: Simon Horman <horms@verge.net.au>
>> Cc: Magnus Damm <magnus.damm@gmail.com>
>> CC: Linux SH List <linux-sh@vger.kernel.org>
>> Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
>> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
>> ---
>> arch/arm/mach-shmobile/Kconfig | 4 ++++
>> 1 file changed, 4 insertions(+)
>
>> diff --git a/arch/arm/mach-shmobile/Kconfig
>> b/arch/arm/mach-shmobile/Kconfig
>> index 3e57d45..010d2a6 100644
>> --- a/arch/arm/mach-shmobile/Kconfig
>> +++ b/arch/arm/mach-shmobile/Kconfig
> [...]
>> @@ -101,6 +102,7 @@ config ARCH_R8A7779
>> select ARCH_WANT_OPTIONAL_GPIOLIB
>> select ARM_GIC
>> select CPU_V7
>> + select MIGHT_HAVE_PCI
>> select SH_CLK_CPG
>> select USB_ARCH_HAS_EHCI
>> select USB_ARCH_HAS_OHCI
>
> Er, this is R8A7779 section. This SoC doesn't have PCI-AHB bridge.
>
>> @@ -111,6 +113,7 @@ config ARCH_R8A7790
>> select ARCH_WANT_OPTIONAL_GPIOLIB
>> select ARM_GIC
>> select CPU_V7
>> + select MIGHT_HAVE_PCI
>> select SH_CLK_CPG
>> select RENESAS_IRQC
>>
>
> R8A7791 section is contrarywise missing. BTW, there's stray letter
> 'c' before that section.
Thanks. I've fixed the R8A7791. I cannot see the stray 'c'.
> WBR, Sergei
>
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code
2013-12-12 17:56 [PATCH] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code Ben Dooks
2013-12-12 18:04 ` Sergei Shtylyov
2013-12-12 18:10 ` Ben Dooks
@ 2013-12-12 18:11 ` Ben Dooks
2013-12-12 18:12 ` Ben Dooks
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Ben Dooks @ 2013-12-12 18:11 UTC (permalink / raw)
To: linux-sh
The PCI sub-system is not enabled by default on ARM and on certain
Renesas devices the build does not select it. This means that there
are configurations that do not allow the AHB-PCI bridge used for the
USB sub-systems to be built.
For the R8A7790, R8A7791 and EMEV-2 select MIGHT_HAVE_PCI to allow the
PCI drivers to be built. Also select MIGHT_HAVE_PCI for the multi-config
where there may be many Reneasas devices selected.
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
CC: Linux SH List <linux-sh@vger.kernel.org>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
arch/arm/mach-shmobile/Kconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3e57d45..4dcb216 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -12,6 +12,7 @@ config ARCH_SHMOBILE_MULTI
select HAVE_SMP
select ARM_GIC
select MIGHT_HAVE_CACHE_L2X0
+ select MIGHT_HAVE_PCI
select NO_IOPORT
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
@@ -101,6 +102,7 @@ config ARCH_R8A7779
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select SH_CLK_CPG
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
@@ -111,6 +113,7 @@ config ARCH_R8A7790
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
@@ -119,6 +122,7 @@ config ARCH_R8A7791
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
@@ -127,6 +131,7 @@ config ARCH_EMEV2
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select USE_OF
select AUTO_ZRELADDR
--
1.8.5.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code
2013-12-12 17:56 [PATCH] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code Ben Dooks
` (2 preceding siblings ...)
2013-12-12 18:11 ` Ben Dooks
@ 2013-12-12 18:12 ` Ben Dooks
2013-12-12 18:14 ` Ben Dooks
2013-12-14 1:46 ` Simon Horman
5 siblings, 0 replies; 7+ messages in thread
From: Ben Dooks @ 2013-12-12 18:12 UTC (permalink / raw)
To: linux-sh
On 12/12/13 18:11, Ben Dooks wrote:
> The PCI sub-system is not enabled by default on ARM and on certain
> Renesas devices the build does not select it. This means that there
> are configurations that do not allow the AHB-PCI bridge used for the
> USB sub-systems to be built.
>
> For the R8A7790, R8A7791 and EMEV-2 select MIGHT_HAVE_PCI to allow the
> PCI drivers to be built. Also select MIGHT_HAVE_PCI for the multi-config
> where there may be many Reneasas devices selected.
>
> Cc: Simon Horman <horms@verge.net.au>
> Cc: Magnus Damm <magnus.damm@gmail.com>
> CC: Linux SH List <linux-sh@vger.kernel.org>
> Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Argh, sorry did not remove the extra Kconfig entry.
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code
2013-12-12 17:56 [PATCH] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code Ben Dooks
` (3 preceding siblings ...)
2013-12-12 18:12 ` Ben Dooks
@ 2013-12-12 18:14 ` Ben Dooks
2013-12-14 1:46 ` Simon Horman
5 siblings, 0 replies; 7+ messages in thread
From: Ben Dooks @ 2013-12-12 18:14 UTC (permalink / raw)
To: linux-sh
The PCI sub-system is not enabled by default on ARM and on certain
Renesas devices the build does not select it. This means that there
are configurations that do not allow the AHB-PCI bridge used for the
USB sub-systems to be built.
For the R8A7790, R8A7791 and EMEV-2 select MIGHT_HAVE_PCI to allow the
PCI drivers to be built. Also select MIGHT_HAVE_PCI for the multi-config
where there may be many Reneasas devices selected.
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
CC: Linux SH List <linux-sh@vger.kernel.org>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
arch/arm/mach-shmobile/Kconfig | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3e57d45..f01e878 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -12,6 +12,7 @@ config ARCH_SHMOBILE_MULTI
select HAVE_SMP
select ARM_GIC
select MIGHT_HAVE_CACHE_L2X0
+ select MIGHT_HAVE_PCI
select NO_IOPORT
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
@@ -111,6 +112,7 @@ config ARCH_R8A7790
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
@@ -119,6 +121,7 @@ config ARCH_R8A7791
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
@@ -127,6 +130,7 @@ config ARCH_EMEV2
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select USE_OF
select AUTO_ZRELADDR
--
1.8.5.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code
2013-12-12 17:56 [PATCH] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code Ben Dooks
` (4 preceding siblings ...)
2013-12-12 18:14 ` Ben Dooks
@ 2013-12-14 1:46 ` Simon Horman
5 siblings, 0 replies; 7+ messages in thread
From: Simon Horman @ 2013-12-14 1:46 UTC (permalink / raw)
To: linux-sh
On Thu, Dec 12, 2013 at 06:14:21PM +0000, Ben Dooks wrote:
> The PCI sub-system is not enabled by default on ARM and on certain
> Renesas devices the build does not select it. This means that there
> are configurations that do not allow the AHB-PCI bridge used for the
> USB sub-systems to be built.
>
> For the R8A7790, R8A7791 and EMEV-2 select MIGHT_HAVE_PCI to allow the
> PCI drivers to be built. Also select MIGHT_HAVE_PCI for the multi-config
> where there may be many Reneasas devices selected.
Thanks, I will queue this up.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-12-14 1:46 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-12 17:56 [PATCH] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code Ben Dooks
2013-12-12 18:04 ` Sergei Shtylyov
2013-12-12 18:10 ` Ben Dooks
2013-12-12 18:11 ` Ben Dooks
2013-12-12 18:12 ` Ben Dooks
2013-12-12 18:14 ` Ben Dooks
2013-12-14 1:46 ` Simon Horman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox