* [PATCH 11/20] ARM: mach-shmobile: R-Mobile A1 support.
From: Kuninori Morimoto @ 2011-11-11 2:45 UTC (permalink / raw)
To: linux-sh
This adds preliminary support for the R8A7740 (R-Mobile A1) CPU
Timer, serial, gic, clock are supported at this point.
This patch is based on v0.1 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/Kconfig | 7 +
arch/arm/mach-shmobile/Makefile | 2 +
arch/arm/mach-shmobile/clock-r8a7740.c | 378 ++++++++++++++++
arch/arm/mach-shmobile/include/mach/common.h | 6 +
arch/arm/mach-shmobile/include/mach/r8a7740.h | 584 +++++++++++++++++++++++++
arch/arm/mach-shmobile/intc-r8a7740.c | 45 ++
arch/arm/mach-shmobile/setup-r8a7740.c | 246 +++++++++++
drivers/tty/serial/sh-sci.h | 4 +-
8 files changed, 1271 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-shmobile/clock-r8a7740.c
create mode 100644 arch/arm/mach-shmobile/include/mach/r8a7740.h
create mode 100644 arch/arm/mach-shmobile/intc-r8a7740.c
create mode 100644 arch/arm/mach-shmobile/setup-r8a7740.c
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 0828fab..329a3cb 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -28,6 +28,13 @@ config ARCH_SH73A0
select ARM_GIC
select I2C
+config ARCH_R8A7740
+ bool "R-Mobile A1 (R8A77400)"
+ select CPU_V7
+ select SH_CLK_CPG
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_GIC
+
comment "SH-Mobile Board Type"
config MACH_G3EVM
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 2aec2f7..d61f1ec 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o
obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7377.o intc-sh7377.o
obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o
obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
+obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
# SMP objects
smp-y := platsmp.o headsmp.o
@@ -29,6 +30,7 @@ obj-$(CONFIG_ARCH_SH7367) += entry-intc.o
obj-$(CONFIG_ARCH_SH7377) += entry-intc.o
obj-$(CONFIG_ARCH_SH7372) += entry-intc.o
obj-$(CONFIG_ARCH_SH73A0) += entry-gic.o
+obj-$(CONFIG_ARCH_R8A7740) += entry-gic.o
# PM objects
obj-$(CONFIG_SUSPEND) += suspend.o
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
new file mode 100644
index 0000000..5bb02f2
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -0,0 +1,378 @@
+/*
+ * R8A7740 processor support
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+#include <mach/r8a7740.h>
+
+/*
+ * | MDx | XTAL1/EXTAL1 | System | EXTALR |
+ * Clock |-------+-----------------+ clock | 32.768 | RCLK
+ * Mode | 2/1/0 | src MHz | source | KHz | source
+ * -------+-------+-----------------+-----------+--------+----------
+ * 0 | 0 0 0 | External 20~50 | XTAL1 | O | EXTALR
+ * 1 | 0 0 1 | Crystal 20~30 | XTAL1 | O | EXTALR
+ * 2 | 0 1 0 | External 40~50 | XTAL1 / 2 | O | EXTALR
+ * 3 | 0 1 1 | Crystal 40~50 | XTAL1 / 2 | O | EXTALR
+ * 4 | 1 0 0 | External 20~50 | XTAL1 | x | XTAL1 / 1024
+ * 5 | 1 0 1 | Crystal 20~30 | XTAL1 | x | XTAL1 / 1024
+ * 6 | 1 1 0 | External 40~50 | XTAL1 / 2 | x | XTAL1 / 2048
+ * 7 | 1 1 1 | Crystal 40~50 | XTAL1 / 2 | x | XTAL1 / 2048
+ */
+
+/* CPG registers */
+#define FRQCRA 0xe6150000
+#define FRQCRB 0xe6150004
+#define FRQCRC 0xe61500e0
+#define PLLC01CR 0xe6150028
+
+#define SUBCKCR 0xe6150080
+
+#define MSTPSR0 0xe6150030
+#define MSTPSR1 0xe6150038
+#define MSTPSR2 0xe6150040
+#define MSTPSR3 0xe6150048
+#define MSTPSR4 0xe615004c
+#define SMSTPCR0 0xe6150130
+#define SMSTPCR1 0xe6150134
+#define SMSTPCR2 0xe6150138
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR4 0xe6150140
+
+/* Fixed 32 KHz root clock from EXTALR pin */
+static struct clk extalr_clk = {
+ .rate = 32768,
+};
+
+/*
+ * 25MHz default rate for the EXTAL1 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+static struct clk extal1_clk = {
+ .rate = 25000000,
+};
+
+/*
+ * 48MHz default rate for the EXTAL2 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+static struct clk extal2_clk = {
+ .rate = 48000000,
+};
+
+/*
+ * 27MHz default rate for the DV_CLKI root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+static struct clk dv_clk = {
+ .rate = 27000000,
+};
+
+static unsigned long div_recalc(struct clk *clk)
+{
+ return clk->parent->rate / (int)(clk->priv);
+}
+
+static struct clk_ops div_clk_ops = {
+ .recalc = div_recalc,
+};
+
+/* extal1 / 2 */
+static struct clk extal1_div2_clk = {
+ .ops = &div_clk_ops,
+ .priv = (void *)2,
+ .parent = &extal1_clk,
+};
+
+/* extal1 / 1024 */
+static struct clk extal1_div1024_clk = {
+ .ops = &div_clk_ops,
+ .priv = (void *)1024,
+ .parent = &extal1_clk,
+};
+
+/* extal1 / 2 / 1024 */
+static struct clk extal1_div2048_clk = {
+ .ops = &div_clk_ops,
+ .priv = (void *)1024,
+ .parent = &extal1_div2_clk,
+};
+
+/* extal2 / 2 */
+static struct clk extal2_div2_clk = {
+ .ops = &div_clk_ops,
+ .priv = (void *)2,
+ .parent = &extal2_clk,
+};
+
+static struct clk_ops followparent_clk_ops = {
+ .recalc = followparent_recalc,
+};
+
+/* Main clock */
+static struct clk system_clk = {
+ .ops = &followparent_clk_ops,
+};
+
+static struct clk system_div2_clk = {
+ .ops = &div_clk_ops,
+ .priv = (void *)2,
+ .parent = &system_clk,
+};
+
+/* r_clk */
+static struct clk r_clk = {
+ .ops = &followparent_clk_ops,
+};
+
+/* PLLC0/PLLC1 */
+static unsigned long pllc01_recalc(struct clk *clk)
+{
+ unsigned long mult = 1;
+
+ if (__raw_readl(PLLC01CR) & (1 << 14))
+ mult = ((__raw_readl(clk->enable_reg) >> 24) & 0x7f) + 1;
+
+ return clk->parent->rate * mult;
+}
+
+static struct clk_ops pllc01_clk_ops = {
+ .recalc = pllc01_recalc,
+};
+
+static struct clk pllc0_clk = {
+ .ops = &pllc01_clk_ops,
+ .flags = CLK_ENABLE_ON_INIT,
+ .parent = &system_clk,
+ .enable_reg = (void __iomem *)FRQCRC,
+};
+
+static struct clk pllc1_clk = {
+ .ops = &pllc01_clk_ops,
+ .flags = CLK_ENABLE_ON_INIT,
+ .parent = &system_div2_clk,
+ .enable_reg = (void __iomem *)FRQCRA,
+};
+
+/* PLLC1 / 2 */
+static struct clk pllc1_div2_clk = {
+ .ops = &div_clk_ops,
+ .priv = (void *)2,
+ .parent = &pllc1_clk,
+};
+
+struct clk *main_clks[] = {
+ &extalr_clk,
+ &extal1_clk,
+ &extal2_clk,
+ &extal1_div2_clk,
+ &extal1_div1024_clk,
+ &extal1_div2048_clk,
+ &extal2_div2_clk,
+ &dv_clk,
+ &system_clk,
+ &system_div2_clk,
+ &r_clk,
+ &pllc0_clk,
+ &pllc1_clk,
+ &pllc1_div2_clk,
+};
+
+static void div4_kick(struct clk *clk)
+{
+ unsigned long value;
+
+ /* set KICK bit in FRQCRB to update hardware setting */
+ value = __raw_readl(FRQCRB);
+ value |= (1 << 31);
+ __raw_writel(value, FRQCRB);
+}
+
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
+ 24, 32, 36, 48, 0, 72, 96, 0 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+ .divisors = divisors,
+ .nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+ .kick = div4_kick,
+};
+
+enum {
+ DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
+ DIV4_HPP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
+ DIV4_NR
+};
+
+struct clk div4_clks[DIV4_NR] = {
+ [DIV4_I] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_ZG] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_B] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_M1] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_HP] = SH_CLK_DIV4(&pllc1_clk, FRQCRB, 4, 0x6fff, 0),
+ [DIV4_HPP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
+ [DIV4_S] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
+ [DIV4_ZB] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 8, 0x6fff, 0),
+ [DIV4_M3] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 4, 0x6fff, 0),
+ [DIV4_CP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 0, 0x6fff, 0),
+};
+
+enum {
+ DIV6_SUB,
+ DIV6_NR
+};
+
+static struct clk div6_clks[DIV6_NR] = {
+ [DIV6_SUB] = SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0),
+};
+
+enum {
+ MSTP125,
+ MSTP116, MSTP111,
+
+ MSTP230,
+ MSTP222,
+ MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+
+ MSTP329, MSTP323,
+
+ MSTP_NR
+};
+
+static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
+ [MSTP116] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
+ [MSTP111] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 11, 0), /* TMU1 */
+
+ [MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 30, 0), /* SCIFA6 */
+ [MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 22, 0), /* SCIFA7 */
+ [MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
+ [MSTP206] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
+ [MSTP204] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
+ [MSTP203] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
+ [MSTP202] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
+ [MSTP201] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
+ [MSTP200] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
+
+ [MSTP329] = SH_CLK_MSTP32(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
+ [MSTP323] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
+};
+
+static struct clk_lookup lookups[] = {
+ /* main clocks */
+ CLKDEV_CON_ID("extalr", &extalr_clk),
+ CLKDEV_CON_ID("extal1", &extal1_clk),
+ CLKDEV_CON_ID("extal2", &extal2_clk),
+ CLKDEV_CON_ID("extal1_div2", &extal1_div2_clk),
+ CLKDEV_CON_ID("extal1_div1024", &extal1_div1024_clk),
+ CLKDEV_CON_ID("extal1_div2048", &extal1_div2048_clk),
+ CLKDEV_CON_ID("extal2_div2", &extal2_div2_clk),
+ CLKDEV_CON_ID("dv_clk", &dv_clk),
+ CLKDEV_CON_ID("system_clk", &system_clk),
+ CLKDEV_CON_ID("system_div2_clk", &system_div2_clk),
+ CLKDEV_CON_ID("r_clk", &r_clk),
+ CLKDEV_CON_ID("pllc0_clk", &pllc0_clk),
+ CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
+ CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
+
+ /* DIV4 clocks */
+ CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
+ CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]),
+ CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
+ CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
+ CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
+ CLKDEV_CON_ID("hpp_clk", &div4_clks[DIV4_HPP]),
+ CLKDEV_CON_ID("s_clk", &div4_clks[DIV4_S]),
+ CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
+ CLKDEV_CON_ID("m3_clk", &div4_clks[DIV4_M3]),
+ CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
+
+ /* DIV6 clocks */
+ CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
+
+ /* MSTP32 clocks */
+ CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP111]),
+ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]),
+ CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]),
+
+ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]),
+ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]),
+ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]),
+ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
+ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
+ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]),
+ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]),
+
+ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]),
+ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]),
+
+ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]),
+ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]),
+};
+
+void __init r8a7740_clock_init(u8 md_ck)
+{
+ int k, ret = 0;
+
+ /* detect system clock parent */
+ if (md_ck & MD_CK1)
+ system_clk.parent = &extal1_div2_clk;
+ else
+ system_clk.parent = &extal1_clk;
+
+ /* detect RCLK parent */
+ switch (md_ck & (MD_CK2 | MD_CK1)) {
+ case MD_CK2 | MD_CK1:
+ r_clk.parent = &extal1_div2048_clk;
+ break;
+ case MD_CK2:
+ r_clk.parent = &extal1_div1024_clk;
+ break;
+ case MD_CK1:
+ default:
+ r_clk.parent = &extalr_clk;
+ break;
+ }
+
+ for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+ ret = clk_register(main_clks[k]);
+
+ if (!ret)
+ ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+ if (!ret)
+ ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+ if (!ret)
+ ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+ if (!ret)
+ clk_init();
+ else
+ panic("failed to setup r8a7740 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index c0cdbf9..ff3754f 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -53,4 +53,10 @@ extern void sh73a0_secondary_init(unsigned int cpu);
extern int sh73a0_boot_secondary(unsigned int cpu);
extern void sh73a0_smp_prepare_cpus(void);
+extern void r8a7740_init_irq(void);
+extern void r8a7740_add_early_devices(void);
+extern void r8a7740_add_standard_devices(void);
+extern void r8a7740_clock_init(u8 md_ck);
+extern void r8a7740_pinmux_init(void);
+
#endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h
new file mode 100644
index 0000000..9d447ab
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h
@@ -0,0 +1,584 @@
+/*
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __ASM_R8A7740_H__
+#define __ASM_R8A7740_H__
+
+/*
+ * MD_CKx pin
+ */
+#define MD_CK2 (1 << 2)
+#define MD_CK1 (1 << 1)
+#define MD_CK0 (1 << 0)
+
+/*
+ * Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+ /* PORT */
+ GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+ GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+ GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+ GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+ GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+ GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+ GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+ GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+ GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+ GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+ GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+ GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+ GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+ GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+ GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+ GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+ GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+ GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+ GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+ GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+ GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+ GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+ GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+ GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
+
+ GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
+ GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
+
+ GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+ GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+ GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+ GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+ GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+ GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+ GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+ GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
+
+ GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
+ GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
+
+ GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
+ GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
+
+ GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+ GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+ GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+ GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+ GPIO_PORT210, GPIO_PORT211,
+
+ /* IRQ */
+ GPIO_FN_IRQ0_PORT2, GPIO_FN_IRQ0_PORT13,
+ GPIO_FN_IRQ1,
+ GPIO_FN_IRQ2_PORT11, GPIO_FN_IRQ2_PORT12,
+ GPIO_FN_IRQ3_PORT10, GPIO_FN_IRQ3_PORT14,
+ GPIO_FN_IRQ4_PORT15, GPIO_FN_IRQ4_PORT172,
+ GPIO_FN_IRQ5_PORT0, GPIO_FN_IRQ5_PORT1,
+ GPIO_FN_IRQ6_PORT121, GPIO_FN_IRQ6_PORT173,
+ GPIO_FN_IRQ7_PORT120, GPIO_FN_IRQ7_PORT209,
+ GPIO_FN_IRQ8,
+ GPIO_FN_IRQ9_PORT118, GPIO_FN_IRQ9_PORT210,
+ GPIO_FN_IRQ10,
+ GPIO_FN_IRQ11,
+ GPIO_FN_IRQ12_PORT42, GPIO_FN_IRQ12_PORT97,
+ GPIO_FN_IRQ13_PORT64, GPIO_FN_IRQ13_PORT98,
+ GPIO_FN_IRQ14_PORT63, GPIO_FN_IRQ14_PORT99,
+ GPIO_FN_IRQ15_PORT62, GPIO_FN_IRQ15_PORT100,
+ GPIO_FN_IRQ16_PORT68, GPIO_FN_IRQ16_PORT211,
+ GPIO_FN_IRQ17,
+ GPIO_FN_IRQ18,
+ GPIO_FN_IRQ19,
+ GPIO_FN_IRQ20,
+ GPIO_FN_IRQ21,
+ GPIO_FN_IRQ22,
+ GPIO_FN_IRQ23,
+ GPIO_FN_IRQ24,
+ GPIO_FN_IRQ25,
+ GPIO_FN_IRQ26_PORT58, GPIO_FN_IRQ26_PORT81,
+ GPIO_FN_IRQ27_PORT57, GPIO_FN_IRQ27_PORT168,
+ GPIO_FN_IRQ28_PORT56, GPIO_FN_IRQ28_PORT169,
+ GPIO_FN_IRQ29_PORT50, GPIO_FN_IRQ29_PORT170,
+ GPIO_FN_IRQ30_PORT49, GPIO_FN_IRQ30_PORT171,
+ GPIO_FN_IRQ31_PORT41, GPIO_FN_IRQ31_PORT167,
+
+ /* Function */
+
+ /* DBGT */
+ GPIO_FN_DBGMDT2, GPIO_FN_DBGMDT1, GPIO_FN_DBGMDT0,
+ GPIO_FN_DBGMD10, GPIO_FN_DBGMD11, GPIO_FN_DBGMD20,
+ GPIO_FN_DBGMD21,
+
+ /* FSI */
+ GPIO_FN_FSIAISLD_PORT0, /* FSIAISLD Port 0/5 */
+ GPIO_FN_FSIAISLD_PORT5,
+ GPIO_FN_FSIASPDIF_PORT9, /* FSIASPDIF Port 9/18 */
+ GPIO_FN_FSIASPDIF_PORT18,
+ GPIO_FN_FSIAOSLD1, GPIO_FN_FSIAOSLD2,
+ GPIO_FN_FSIAOLR, GPIO_FN_FSIAOBT,
+ GPIO_FN_FSIAOSLD, GPIO_FN_FSIAOMC,
+ GPIO_FN_FSIACK, GPIO_FN_FSIAILR,
+ GPIO_FN_FSIAIBT,
+
+ /* FMSI */
+ GPIO_FN_FMSISLD_PORT1, /* FMSISLD Port 1/6 */
+ GPIO_FN_FMSISLD_PORT6,
+ GPIO_FN_FMSIILR, GPIO_FN_FMSIIBT,
+ GPIO_FN_FMSIOLR, GPIO_FN_FMSIOBT,
+ GPIO_FN_FMSICK, GPIO_FN_FMSOILR,
+ GPIO_FN_FMSOIBT, GPIO_FN_FMSOOLR,
+ GPIO_FN_FMSOOBT, GPIO_FN_FMSOSLD,
+ GPIO_FN_FMSOCK,
+
+ /* SCIFA0 */
+ GPIO_FN_SCIFA0_SCK, GPIO_FN_SCIFA0_CTS,
+ GPIO_FN_SCIFA0_RTS, GPIO_FN_SCIFA0_RXD,
+ GPIO_FN_SCIFA0_TXD,
+
+ /* SCIFA1 */
+ GPIO_FN_SCIFA1_CTS, GPIO_FN_SCIFA1_SCK,
+ GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_TXD,
+ GPIO_FN_SCIFA1_RTS,
+
+ /* SCIFA2 */
+ GPIO_FN_SCIFA2_SCK_PORT22, /* SCIFA2_SCK Port 22/199 */
+ GPIO_FN_SCIFA2_SCK_PORT199,
+ GPIO_FN_SCIFA2_RXD, GPIO_FN_SCIFA2_TXD,
+ GPIO_FN_SCIFA2_CTS, GPIO_FN_SCIFA2_RTS,
+
+ /* SCIFA3 */
+ GPIO_FN_SCIFA3_RTS_PORT105, /* MSEL5CR_8_0 */
+ GPIO_FN_SCIFA3_SCK_PORT116,
+ GPIO_FN_SCIFA3_CTS_PORT117,
+ GPIO_FN_SCIFA3_RXD_PORT174,
+ GPIO_FN_SCIFA3_TXD_PORT175,
+
+ GPIO_FN_SCIFA3_RTS_PORT161, /* MSEL5CR_8_1 */
+ GPIO_FN_SCIFA3_SCK_PORT158,
+ GPIO_FN_SCIFA3_CTS_PORT162,
+ GPIO_FN_SCIFA3_RXD_PORT159,
+ GPIO_FN_SCIFA3_TXD_PORT160,
+
+ /* SCIFA4 */
+ GPIO_FN_SCIFA4_RXD_PORT12, /* MSEL5CR[12:11] = 00 */
+ GPIO_FN_SCIFA4_TXD_PORT13,
+
+ GPIO_FN_SCIFA4_RXD_PORT204, /* MSEL5CR[12:11] = 01 */
+ GPIO_FN_SCIFA4_TXD_PORT203,
+
+ GPIO_FN_SCIFA4_RXD_PORT94, /* MSEL5CR[12:11] = 10 */
+ GPIO_FN_SCIFA4_TXD_PORT93,
+
+ GPIO_FN_SCIFA4_SCK_PORT21, /* SCIFA4_SCK Port 21/205 */
+ GPIO_FN_SCIFA4_SCK_PORT205,
+
+ /* SCIFA5 */
+ GPIO_FN_SCIFA5_TXD_PORT20, /* MSEL5CR[15:14] = 00 */
+ GPIO_FN_SCIFA5_RXD_PORT10,
+
+ GPIO_FN_SCIFA5_RXD_PORT207, /* MSEL5CR[15:14] = 01 */
+ GPIO_FN_SCIFA5_TXD_PORT208,
+
+ GPIO_FN_SCIFA5_TXD_PORT91, /* MSEL5CR[15:14] = 10 */
+ GPIO_FN_SCIFA5_RXD_PORT92,
+
+ GPIO_FN_SCIFA5_SCK_PORT23, /* SCIFA5_SCK Port 23/206 */
+ GPIO_FN_SCIFA5_SCK_PORT206,
+
+ /* SCIFA6 */
+ GPIO_FN_SCIFA6_SCK, GPIO_FN_SCIFA6_RXD, GPIO_FN_SCIFA6_TXD,
+
+ /* SCIFA7 */
+ GPIO_FN_SCIFA7_TXD, GPIO_FN_SCIFA7_RXD,
+
+ /* SCIFAB */
+ GPIO_FN_SCIFB_SCK_PORT190, /* MSEL5CR_17_0 */
+ GPIO_FN_SCIFB_RXD_PORT191,
+ GPIO_FN_SCIFB_TXD_PORT192,
+ GPIO_FN_SCIFB_RTS_PORT186,
+ GPIO_FN_SCIFB_CTS_PORT187,
+
+ GPIO_FN_SCIFB_SCK_PORT2, /* MSEL5CR_17_1 */
+ GPIO_FN_SCIFB_RXD_PORT3,
+ GPIO_FN_SCIFB_TXD_PORT4,
+ GPIO_FN_SCIFB_RTS_PORT172,
+ GPIO_FN_SCIFB_CTS_PORT173,
+
+ /* LCD0 */
+ GPIO_FN_LCDC0_SELECT,
+ GPIO_FN_LCD0_D0, GPIO_FN_LCD0_D1, GPIO_FN_LCD0_D2,
+ GPIO_FN_LCD0_D3, GPIO_FN_LCD0_D4, GPIO_FN_LCD0_D5,
+ GPIO_FN_LCD0_D6, GPIO_FN_LCD0_D7, GPIO_FN_LCD0_D8,
+ GPIO_FN_LCD0_D9, GPIO_FN_LCD0_D10, GPIO_FN_LCD0_D11,
+ GPIO_FN_LCD0_D12, GPIO_FN_LCD0_D13, GPIO_FN_LCD0_D14,
+ GPIO_FN_LCD0_D15, GPIO_FN_LCD0_D16, GPIO_FN_LCD0_D17,
+ GPIO_FN_LCD0_DON, GPIO_FN_LCD0_VCPWC, GPIO_FN_LCD0_VEPWC,
+
+ GPIO_FN_LCD0_DCK, GPIO_FN_LCD0_VSYN, /* for RGB */
+ GPIO_FN_LCD0_HSYN, GPIO_FN_LCD0_DISP, /* for RGB */
+
+ GPIO_FN_LCD0_WR, GPIO_FN_LCD0_RD, /* for SYS */
+ GPIO_FN_LCD0_CS, GPIO_FN_LCD0_RS, /* for SYS */
+
+ GPIO_FN_LCD0_D18_PORT163, GPIO_FN_LCD0_D19_PORT162,
+ GPIO_FN_LCD0_D20_PORT161, GPIO_FN_LCD0_D21_PORT158,
+ GPIO_FN_LCD0_D22_PORT160, GPIO_FN_LCD0_D23_PORT159,
+ GPIO_FN_LCD0_LCLK_PORT165, /* MSEL5CR_6_1 */
+
+ GPIO_FN_LCD0_D18_PORT40, GPIO_FN_LCD0_D19_PORT4,
+ GPIO_FN_LCD0_D20_PORT3, GPIO_FN_LCD0_D21_PORT2,
+ GPIO_FN_LCD0_D22_PORT0, GPIO_FN_LCD0_D23_PORT1,
+ GPIO_FN_LCD0_LCLK_PORT102, /* MSEL5CR_6_0 */
+
+ /* LCD1 */
+ GPIO_FN_LCDC1_SELECT,
+ GPIO_FN_LCD1_D0, GPIO_FN_LCD1_D1, GPIO_FN_LCD1_D2,
+ GPIO_FN_LCD1_D3, GPIO_FN_LCD1_D4, GPIO_FN_LCD1_D5,
+ GPIO_FN_LCD1_D6, GPIO_FN_LCD1_D7, GPIO_FN_LCD1_D8,
+ GPIO_FN_LCD1_D9, GPIO_FN_LCD1_D10, GPIO_FN_LCD1_D11,
+ GPIO_FN_LCD1_D12, GPIO_FN_LCD1_D13, GPIO_FN_LCD1_D14,
+ GPIO_FN_LCD1_D15, GPIO_FN_LCD1_D16, GPIO_FN_LCD1_D17,
+ GPIO_FN_LCD1_D18, GPIO_FN_LCD1_D19, GPIO_FN_LCD1_D20,
+ GPIO_FN_LCD1_D21, GPIO_FN_LCD1_D22, GPIO_FN_LCD1_D23,
+ GPIO_FN_LCD1_DON, GPIO_FN_LCD1_VCPWC,
+ GPIO_FN_LCD1_LCLK, GPIO_FN_LCD1_VEPWC,
+
+ GPIO_FN_LCD1_DCK, GPIO_FN_LCD1_VSYN, /* for RGB */
+ GPIO_FN_LCD1_HSYN, GPIO_FN_LCD1_DISP, /* for RGB */
+
+ GPIO_FN_LCD1_WR, GPIO_FN_LCD1_RD, /* for SYS */
+ GPIO_FN_LCD1_CS, GPIO_FN_LCD1_RS, /* for SYS */
+
+ /* RSPI */
+ GPIO_FN_RSPI_SSL0_A, GPIO_FN_RSPI_SSL1_A,
+ GPIO_FN_RSPI_SSL2_A, GPIO_FN_RSPI_SSL3_A,
+ GPIO_FN_RSPI_MOSI_A, GPIO_FN_RSPI_MISO_A,
+ GPIO_FN_RSPI_CK_A,
+
+ /* VIO CKO */
+ GPIO_FN_VIO_CKO1,
+ GPIO_FN_VIO_CKO2,
+ GPIO_FN_VIO_CKO_1,
+ GPIO_FN_VIO_CKO,
+
+ /* VIO0 */
+ GPIO_FN_VIO0_D0, GPIO_FN_VIO0_D1, GPIO_FN_VIO0_D2,
+ GPIO_FN_VIO0_D3, GPIO_FN_VIO0_D4, GPIO_FN_VIO0_D5,
+ GPIO_FN_VIO0_D6, GPIO_FN_VIO0_D7, GPIO_FN_VIO0_D8,
+ GPIO_FN_VIO0_D9, GPIO_FN_VIO0_D10, GPIO_FN_VIO0_D11,
+ GPIO_FN_VIO0_D12, GPIO_FN_VIO0_VD, GPIO_FN_VIO0_HD,
+ GPIO_FN_VIO0_CLK, GPIO_FN_VIO0_FIELD,
+
+ GPIO_FN_VIO0_D13_PORT26, /* MSEL5CR_27_0 */
+ GPIO_FN_VIO0_D14_PORT25,
+ GPIO_FN_VIO0_D15_PORT24,
+
+ GPIO_FN_VIO0_D13_PORT22, /* MSEL5CR_27_1 */
+ GPIO_FN_VIO0_D14_PORT95,
+ GPIO_FN_VIO0_D15_PORT96,
+
+ /* VIO1 */
+ GPIO_FN_VIO1_D0, GPIO_FN_VIO1_D1, GPIO_FN_VIO1_D2,
+ GPIO_FN_VIO1_D3, GPIO_FN_VIO1_D4, GPIO_FN_VIO1_D5,
+ GPIO_FN_VIO1_D6, GPIO_FN_VIO1_D7, GPIO_FN_VIO1_VD,
+ GPIO_FN_VIO1_HD, GPIO_FN_VIO1_CLK, GPIO_FN_VIO1_FIELD,
+
+ /* TPU0 */
+ GPIO_FN_TPU0TO0, GPIO_FN_TPU0TO1,
+ GPIO_FN_TPU0TO3,
+ GPIO_FN_TPU0TO2_PORT66, /* TPU0TO2 Port 66/202 */
+ GPIO_FN_TPU0TO2_PORT202,
+
+ /* SSP1 0 */
+ GPIO_FN_STP0_IPD0, GPIO_FN_STP0_IPD1, GPIO_FN_STP0_IPD2,
+ GPIO_FN_STP0_IPD3, GPIO_FN_STP0_IPD4, GPIO_FN_STP0_IPD5,
+ GPIO_FN_STP0_IPD6, GPIO_FN_STP0_IPD7, GPIO_FN_STP0_IPEN,
+ GPIO_FN_STP0_IPCLK, GPIO_FN_STP0_IPSYNC,
+
+ /* SSP1 1 */
+ GPIO_FN_STP1_IPD1, GPIO_FN_STP1_IPD2, GPIO_FN_STP1_IPD3,
+ GPIO_FN_STP1_IPD4, GPIO_FN_STP1_IPD5, GPIO_FN_STP1_IPD6,
+ GPIO_FN_STP1_IPD7, GPIO_FN_STP1_IPCLK, GPIO_FN_STP1_IPSYNC,
+
+ GPIO_FN_STP1_IPD0_PORT186, /* MSEL5CR_23_0 */
+ GPIO_FN_STP1_IPEN_PORT187,
+
+ GPIO_FN_STP1_IPD0_PORT194, /* MSEL5CR_23_1 */
+ GPIO_FN_STP1_IPEN_PORT193,
+
+ /* SIM */
+ GPIO_FN_SIM_RST, GPIO_FN_SIM_CLK,
+ GPIO_FN_SIM_D_PORT22, /* SIM_D Port 22/199 */
+ GPIO_FN_SIM_D_PORT199,
+
+ /* SDHI0 */
+ GPIO_FN_SDHI0_D0, GPIO_FN_SDHI0_D1, GPIO_FN_SDHI0_D2,
+ GPIO_FN_SDHI0_D3, GPIO_FN_SDHI0_CD, GPIO_FN_SDHI0_WP,
+ GPIO_FN_SDHI0_CMD, GPIO_FN_SDHI0_CLK,
+
+ /* SDHI1 */
+ GPIO_FN_SDHI1_D0, GPIO_FN_SDHI1_D1, GPIO_FN_SDHI1_D2,
+ GPIO_FN_SDHI1_D3, GPIO_FN_SDHI1_CD, GPIO_FN_SDHI1_WP,
+ GPIO_FN_SDHI1_CMD, GPIO_FN_SDHI1_CLK,
+
+ /* SDHI2 */
+ GPIO_FN_SDHI2_D0, GPIO_FN_SDHI2_D1, GPIO_FN_SDHI2_D2,
+ GPIO_FN_SDHI2_D3, GPIO_FN_SDHI2_CLK, GPIO_FN_SDHI2_CMD,
+
+ GPIO_FN_SDHI2_CD_PORT24, /* MSEL5CR_19_0 */
+ GPIO_FN_SDHI2_WP_PORT25,
+
+ GPIO_FN_SDHI2_WP_PORT177, /* MSEL5CR_19_1 */
+ GPIO_FN_SDHI2_CD_PORT202,
+
+ /* MSIOF2 */
+ GPIO_FN_MSIOF2_TXD, GPIO_FN_MSIOF2_RXD, GPIO_FN_MSIOF2_TSCK,
+ GPIO_FN_MSIOF2_SS2, GPIO_FN_MSIOF2_TSYNC, GPIO_FN_MSIOF2_SS1,
+ GPIO_FN_MSIOF2_MCK1, GPIO_FN_MSIOF2_MCK0, GPIO_FN_MSIOF2_RSYNC,
+ GPIO_FN_MSIOF2_RSCK,
+
+ /* KEYSC */
+ GPIO_FN_KEYIN4, GPIO_FN_KEYIN5,
+ GPIO_FN_KEYIN6, GPIO_FN_KEYIN7,
+ GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2,
+ GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4, GPIO_FN_KEYOUT5,
+ GPIO_FN_KEYOUT6, GPIO_FN_KEYOUT7,
+
+ GPIO_FN_KEYIN0_PORT43, /* MSEL4CR_18_0 */
+ GPIO_FN_KEYIN1_PORT44,
+ GPIO_FN_KEYIN2_PORT45,
+ GPIO_FN_KEYIN3_PORT46,
+
+ GPIO_FN_KEYIN0_PORT58, /* MSEL4CR_18_1 */
+ GPIO_FN_KEYIN1_PORT57,
+ GPIO_FN_KEYIN2_PORT56,
+ GPIO_FN_KEYIN3_PORT55,
+
+ /* VOU */
+ GPIO_FN_DV_D0, GPIO_FN_DV_D1, GPIO_FN_DV_D2, GPIO_FN_DV_D3,
+ GPIO_FN_DV_D4, GPIO_FN_DV_D5, GPIO_FN_DV_D6, GPIO_FN_DV_D7,
+ GPIO_FN_DV_D8, GPIO_FN_DV_D9, GPIO_FN_DV_D10, GPIO_FN_DV_D11,
+ GPIO_FN_DV_D12, GPIO_FN_DV_D13, GPIO_FN_DV_D14, GPIO_FN_DV_D15,
+ GPIO_FN_DV_CLK,
+ GPIO_FN_DV_VSYNC,
+ GPIO_FN_DV_HSYNC,
+
+ /* MEMC */
+ GPIO_FN_MEMC_AD0, GPIO_FN_MEMC_AD1, GPIO_FN_MEMC_AD2,
+ GPIO_FN_MEMC_AD3, GPIO_FN_MEMC_AD4, GPIO_FN_MEMC_AD5,
+ GPIO_FN_MEMC_AD6, GPIO_FN_MEMC_AD7, GPIO_FN_MEMC_AD8,
+ GPIO_FN_MEMC_AD9, GPIO_FN_MEMC_AD10, GPIO_FN_MEMC_AD11,
+ GPIO_FN_MEMC_AD12, GPIO_FN_MEMC_AD13, GPIO_FN_MEMC_AD14,
+ GPIO_FN_MEMC_AD15, GPIO_FN_MEMC_CS0, GPIO_FN_MEMC_INT,
+ GPIO_FN_MEMC_NWE, GPIO_FN_MEMC_NOE,
+
+ GPIO_FN_MEMC_CS1, /* MSEL4CR_6_0 */
+ GPIO_FN_MEMC_ADV,
+ GPIO_FN_MEMC_WAIT,
+ GPIO_FN_MEMC_BUSCLK,
+
+ GPIO_FN_MEMC_A1, /* MSEL4CR_6_1 */
+ GPIO_FN_MEMC_DREQ0,
+ GPIO_FN_MEMC_DREQ1,
+ GPIO_FN_MEMC_A0,
+
+ /* MMC */
+ GPIO_FN_MMC0_D0_PORT68, GPIO_FN_MMC0_D1_PORT69,
+ GPIO_FN_MMC0_D2_PORT70, GPIO_FN_MMC0_D3_PORT71,
+ GPIO_FN_MMC0_D4_PORT72, GPIO_FN_MMC0_D5_PORT73,
+ GPIO_FN_MMC0_D6_PORT74, GPIO_FN_MMC0_D7_PORT75,
+ GPIO_FN_MMC0_CLK_PORT66,
+ GPIO_FN_MMC0_CMD_PORT67, /* MSEL4CR_15_0 */
+
+ GPIO_FN_MMC1_D0_PORT149, GPIO_FN_MMC1_D1_PORT148,
+ GPIO_FN_MMC1_D2_PORT147, GPIO_FN_MMC1_D3_PORT146,
+ GPIO_FN_MMC1_D4_PORT145, GPIO_FN_MMC1_D5_PORT144,
+ GPIO_FN_MMC1_D6_PORT143, GPIO_FN_MMC1_D7_PORT142,
+ GPIO_FN_MMC1_CLK_PORT103,
+ GPIO_FN_MMC1_CMD_PORT104, /* MSEL4CR_15_1 */
+
+ /* MSIOF0 */
+ GPIO_FN_MSIOF0_SS1, GPIO_FN_MSIOF0_SS2,
+ GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_TXD,
+ GPIO_FN_MSIOF0_MCK0, GPIO_FN_MSIOF0_MCK1,
+ GPIO_FN_MSIOF0_RSYNC, GPIO_FN_MSIOF0_RSCK,
+ GPIO_FN_MSIOF0_TSCK, GPIO_FN_MSIOF0_TSYNC,
+
+ /* MSIOF1 */
+ GPIO_FN_MSIOF1_RSCK, GPIO_FN_MSIOF1_RSYNC,
+ GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1,
+
+ GPIO_FN_MSIOF1_SS2_PORT116, GPIO_FN_MSIOF1_SS1_PORT117,
+ GPIO_FN_MSIOF1_RXD_PORT118, GPIO_FN_MSIOF1_TXD_PORT119,
+ GPIO_FN_MSIOF1_TSYNC_PORT120,
+ GPIO_FN_MSIOF1_TSCK_PORT121, /* MSEL4CR_10_0 */
+
+ GPIO_FN_MSIOF1_SS1_PORT67, GPIO_FN_MSIOF1_TSCK_PORT72,
+ GPIO_FN_MSIOF1_TSYNC_PORT73, GPIO_FN_MSIOF1_TXD_PORT74,
+ GPIO_FN_MSIOF1_RXD_PORT75,
+ GPIO_FN_MSIOF1_SS2_PORT202, /* MSEL4CR_10_1 */
+
+ /* GPIO */
+ GPIO_FN_GPO0, GPIO_FN_GPI0,
+ GPIO_FN_GPO1, GPIO_FN_GPI1,
+
+ /* USB0 */
+ GPIO_FN_USB0_OCI, GPIO_FN_USB0_PPON, GPIO_FN_VBUS,
+
+ /* USB1 */
+ GPIO_FN_USB1_OCI, GPIO_FN_USB1_PPON,
+
+ /* BBIF1 */
+ GPIO_FN_BBIF1_RXD, GPIO_FN_BBIF1_TXD, GPIO_FN_BBIF1_TSYNC,
+ GPIO_FN_BBIF1_TSCK, GPIO_FN_BBIF1_RSCK, GPIO_FN_BBIF1_RSYNC,
+ GPIO_FN_BBIF1_FLOW, GPIO_FN_BBIF1_RX_FLOW_N,
+
+ /* BBIF2 */
+ GPIO_FN_BBIF2_TXD2_PORT5, /* MSEL5CR_0_0 */
+ GPIO_FN_BBIF2_RXD2_PORT60,
+ GPIO_FN_BBIF2_TSYNC2_PORT6,
+ GPIO_FN_BBIF2_TSCK2_PORT59,
+
+ GPIO_FN_BBIF2_RXD2_PORT90, /* MSEL5CR_0_1 */
+ GPIO_FN_BBIF2_TXD2_PORT183,
+ GPIO_FN_BBIF2_TSCK2_PORT89,
+ GPIO_FN_BBIF2_TSYNC2_PORT184,
+
+ /* BSC / FLCTL / PCMCIA */
+ GPIO_FN_CS0, GPIO_FN_CS2, GPIO_FN_CS4,
+ GPIO_FN_CS5B, GPIO_FN_CS6A,
+ GPIO_FN_CS5A_PORT105, /* CS5A PORT 19/105 */
+ GPIO_FN_CS5A_PORT19,
+ GPIO_FN_IOIS16, /* ? */
+
+ GPIO_FN_A0, GPIO_FN_A1, GPIO_FN_A2, GPIO_FN_A3,
+ GPIO_FN_A4_FOE, /* share with FLCTL */
+ GPIO_FN_A5_FCDE, /* share with FLCTL */
+ GPIO_FN_A6, GPIO_FN_A7, GPIO_FN_A8, GPIO_FN_A9,
+ GPIO_FN_A10, GPIO_FN_A11, GPIO_FN_A12, GPIO_FN_A13,
+ GPIO_FN_A14, GPIO_FN_A15, GPIO_FN_A16, GPIO_FN_A17,
+ GPIO_FN_A18, GPIO_FN_A19, GPIO_FN_A20, GPIO_FN_A21,
+ GPIO_FN_A22, GPIO_FN_A23, GPIO_FN_A24, GPIO_FN_A25,
+ GPIO_FN_A26,
+
+ GPIO_FN_D0_NAF0, GPIO_FN_D1_NAF1, /* share with FLCTL */
+ GPIO_FN_D2_NAF2, GPIO_FN_D3_NAF3, /* share with FLCTL */
+ GPIO_FN_D4_NAF4, GPIO_FN_D5_NAF5, /* share with FLCTL */
+ GPIO_FN_D6_NAF6, GPIO_FN_D7_NAF7, /* share with FLCTL */
+ GPIO_FN_D8_NAF8, GPIO_FN_D9_NAF9, /* share with FLCTL */
+ GPIO_FN_D10_NAF10, GPIO_FN_D11_NAF11, /* share with FLCTL */
+ GPIO_FN_D12_NAF12, GPIO_FN_D13_NAF13, /* share with FLCTL */
+ GPIO_FN_D14_NAF14, GPIO_FN_D15_NAF15, /* share with FLCTL */
+
+ GPIO_FN_D16, GPIO_FN_D17, GPIO_FN_D18, GPIO_FN_D19,
+ GPIO_FN_D20, GPIO_FN_D21, GPIO_FN_D22, GPIO_FN_D23,
+ GPIO_FN_D24, GPIO_FN_D25, GPIO_FN_D26, GPIO_FN_D27,
+ GPIO_FN_D28, GPIO_FN_D29, GPIO_FN_D30, GPIO_FN_D31,
+
+ GPIO_FN_WE0_FWE, /* share with FLCTL */
+ GPIO_FN_WE1,
+ GPIO_FN_WE2_ICIORD, /* share with PCMCIA */
+ GPIO_FN_WE3_ICIOWR, /* share with PCMCIA */
+ GPIO_FN_CKO, GPIO_FN_BS, GPIO_FN_RDWR,
+ GPIO_FN_RD_FSC, /* share with FLCTL */
+ GPIO_FN_WAIT_PORT177, /* WAIT Port 90/177 */
+ GPIO_FN_WAIT_PORT90,
+
+ GPIO_FN_FCE0, GPIO_FN_FCE1, GPIO_FN_FRB, /* FLCTL */
+
+ /* IRDA */
+ GPIO_FN_IRDA_FIRSEL, GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT,
+
+ /* ATAPI */
+ GPIO_FN_IDE_D0, GPIO_FN_IDE_D1, GPIO_FN_IDE_D2,
+ GPIO_FN_IDE_D3, GPIO_FN_IDE_D4, GPIO_FN_IDE_D5,
+ GPIO_FN_IDE_D6, GPIO_FN_IDE_D7, GPIO_FN_IDE_D8,
+ GPIO_FN_IDE_D9, GPIO_FN_IDE_D10, GPIO_FN_IDE_D11,
+ GPIO_FN_IDE_D12, GPIO_FN_IDE_D13, GPIO_FN_IDE_D14,
+ GPIO_FN_IDE_D15, GPIO_FN_IDE_A0, GPIO_FN_IDE_A1,
+ GPIO_FN_IDE_A2, GPIO_FN_IDE_CS0, GPIO_FN_IDE_CS1,
+ GPIO_FN_IDE_IOWR, GPIO_FN_IDE_IORD, GPIO_FN_IDE_IORDY,
+ GPIO_FN_IDE_INT, GPIO_FN_IDE_RST, GPIO_FN_IDE_DIRECTION,
+ GPIO_FN_IDE_EXBUF_ENB, GPIO_FN_IDE_IODACK, GPIO_FN_IDE_IODREQ,
+
+ /* RMII */
+ GPIO_FN_RMII_CRS_DV, GPIO_FN_RMII_RX_ER, GPIO_FN_RMII_RXD0,
+ GPIO_FN_RMII_RXD1, GPIO_FN_RMII_TX_EN, GPIO_FN_RMII_TXD0,
+ GPIO_FN_RMII_MDC, GPIO_FN_RMII_TXD1, GPIO_FN_RMII_MDIO,
+ GPIO_FN_RMII_REF50CK, /* for RMII */
+ GPIO_FN_RMII_REF125CK, /* for GMII */
+
+ /* GEther */
+ GPIO_FN_ET_TX_CLK, GPIO_FN_ET_TX_EN, GPIO_FN_ET_ETXD0,
+ GPIO_FN_ET_ETXD1, GPIO_FN_ET_ETXD2, GPIO_FN_ET_ETXD3,
+ GPIO_FN_ET_ETXD4, GPIO_FN_ET_ETXD5, /* for GEther */
+ GPIO_FN_ET_ETXD6, GPIO_FN_ET_ETXD7, /* for GEther */
+ GPIO_FN_ET_COL, GPIO_FN_ET_TX_ER,
+ GPIO_FN_ET_RX_CLK, GPIO_FN_ET_RX_DV,
+ GPIO_FN_ET_ERXD0, GPIO_FN_ET_ERXD1,
+ GPIO_FN_ET_ERXD2, GPIO_FN_ET_ERXD3,
+ GPIO_FN_ET_ERXD4, GPIO_FN_ET_ERXD5, /* for GEther */
+ GPIO_FN_ET_ERXD6, GPIO_FN_ET_ERXD7, /* for GEther */
+ GPIO_FN_ET_RX_ER, GPIO_FN_ET_CRS,
+ GPIO_FN_ET_MDC, GPIO_FN_ET_MDIO,
+ GPIO_FN_ET_LINK, GPIO_FN_ET_PHY_INT,
+ GPIO_FN_ET_WOL, GPIO_FN_ET_GTX_CLK,
+
+ /* DMA0 */
+ GPIO_FN_DREQ0, GPIO_FN_DACK0,
+
+ /* DMA1 */
+ GPIO_FN_DREQ1, GPIO_FN_DACK1,
+
+ /* SYSC */
+ GPIO_FN_RESETOUTS,
+ GPIO_FN_RESETP_PULLUP,
+ GPIO_FN_RESETP_PLAIN,
+
+ /* SDENC */
+ GPIO_FN_SDENC_CPG,
+ GPIO_FN_SDENC_DV_CLKI,
+
+ /* IRREM */
+ GPIO_FN_IROUT,
+
+ /* DEBUG */
+ GPIO_FN_EDEBGREQ_PULLDOWN,
+ GPIO_FN_EDEBGREQ_PULLUP,
+
+ GPIO_FN_TRACEAUD_FROM_VIO,
+ GPIO_FN_TRACEAUD_FROM_LCDC0,
+ GPIO_FN_TRACEAUD_FROM_MEMC,
+};
+
+#endif /* __ASM_R8A7740_H__ */
diff --git a/arch/arm/mach-shmobile/intc-r8a7740.c b/arch/arm/mach-shmobile/intc-r8a7740.c
new file mode 100644
index 0000000..c62a205
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-r8a7740.c
@@ -0,0 +1,45 @@
+/*
+ * R8A7740 processor support
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/hardware/gic.h>
+
+#define INTA_CTRL 0xe605807c
+
+static int r8a7740_set_wake(struct irq_data *data, unsigned int on)
+{
+ return 0; /* always allow wakeup */
+}
+
+void __init r8a7740_init_irq(void)
+{
+ void __iomem *gic_dist_base = __io(0xf0001000);
+ void __iomem *gic_cpu_base = __io(0xf0000000);
+
+ /*
+ * Change INT_SEL INTCA->GIC
+ * (on GPIO)
+ */
+ __raw_writel(__raw_readl(INTA_CTRL) & ~(1 << 1), INTA_CTRL);
+
+ gic_init(0, 29, gic_dist_base, gic_cpu_base);
+ gic_arch_extn.irq_set_wake = r8a7740_set_wake;
+}
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
new file mode 100644
index 0000000..5548518
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -0,0 +1,246 @@
+/*
+ * R8A7740 processor support
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <mach/r8a7740.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+/* SCIFA0 */
+static struct plat_sci_port scif0_platform_data = {
+ .mapbase = 0xe6c40000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(100)),
+};
+
+static struct platform_device scif0_device = {
+ .name = "sh-sci",
+ .id = 0,
+ .dev = {
+ .platform_data = &scif0_platform_data,
+ },
+};
+
+/* SCIFA1 */
+static struct plat_sci_port scif1_platform_data = {
+ .mapbase = 0xe6c50000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(101)),
+};
+
+static struct platform_device scif1_device = {
+ .name = "sh-sci",
+ .id = 1,
+ .dev = {
+ .platform_data = &scif1_platform_data,
+ },
+};
+
+/* SCIFA2 */
+static struct plat_sci_port scif2_platform_data = {
+ .mapbase = 0xe6c60000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(102)),
+};
+
+static struct platform_device scif2_device = {
+ .name = "sh-sci",
+ .id = 2,
+ .dev = {
+ .platform_data = &scif2_platform_data,
+ },
+};
+
+/* SCIFA3 */
+static struct plat_sci_port scif3_platform_data = {
+ .mapbase = 0xe6c70000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(103)),
+};
+
+static struct platform_device scif3_device = {
+ .name = "sh-sci",
+ .id = 3,
+ .dev = {
+ .platform_data = &scif3_platform_data,
+ },
+};
+
+/* SCIFA4 */
+static struct plat_sci_port scif4_platform_data = {
+ .mapbase = 0xe6c80000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(104)),
+};
+
+static struct platform_device scif4_device = {
+ .name = "sh-sci",
+ .id = 4,
+ .dev = {
+ .platform_data = &scif4_platform_data,
+ },
+};
+
+/* SCIFA5 */
+static struct plat_sci_port scif5_platform_data = {
+ .mapbase = 0xe6cb0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(105)),
+};
+
+static struct platform_device scif5_device = {
+ .name = "sh-sci",
+ .id = 5,
+ .dev = {
+ .platform_data = &scif5_platform_data,
+ },
+};
+
+/* SCIFA6 */
+static struct plat_sci_port scif6_platform_data = {
+ .mapbase = 0xe6cc0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(106)),
+};
+
+static struct platform_device scif6_device = {
+ .name = "sh-sci",
+ .id = 6,
+ .dev = {
+ .platform_data = &scif6_platform_data,
+ },
+};
+
+/* SCIFA7 */
+static struct plat_sci_port scif7_platform_data = {
+ .mapbase = 0xe6cd0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(107)),
+};
+
+static struct platform_device scif7_device = {
+ .name = "sh-sci",
+ .id = 7,
+ .dev = {
+ .platform_data = &scif7_platform_data,
+ },
+};
+
+/* SCIFB */
+static struct plat_sci_port scifb_platform_data = {
+ .mapbase = 0xe6c30000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFB,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(108)),
+};
+
+static struct platform_device scifb_device = {
+ .name = "sh-sci",
+ .id = 8,
+ .dev = {
+ .platform_data = &scifb_platform_data,
+ },
+};
+
+/* CMT */
+static struct sh_timer_config cmt10_platform_data = {
+ .name = "CMT10",
+ .channel_offset = 0x10,
+ .timer_bit = 0,
+ .clockevent_rating = 125,
+ .clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+ [0] = {
+ .name = "CMT10",
+ .start = 0xe6138010,
+ .end = 0xe613801b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(58),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt10_device = {
+ .name = "sh_cmt",
+ .id = 10,
+ .dev = {
+ .platform_data = &cmt10_platform_data,
+ },
+ .resource = cmt10_resources,
+ .num_resources = ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *r8a7740_early_devices[] __initdata = {
+ &scif0_device,
+ &scif1_device,
+ &scif2_device,
+ &scif3_device,
+ &scif4_device,
+ &scif5_device,
+ &scif6_device,
+ &scif7_device,
+ &scifb_device,
+ &cmt10_device,
+};
+
+void __init r8a7740_add_standard_devices(void)
+{
+ platform_add_devices(r8a7740_early_devices,
+ ARRAY_SIZE(r8a7740_early_devices));
+}
+
+void __init r8a7740_add_early_devices(void)
+{
+ early_platform_add_devices(r8a7740_early_devices,
+ ARRAY_SIZE(r8a7740_early_devices));
+}
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index ab6be55..e9dd817 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -17,7 +17,9 @@
defined(CONFIG_ARCH_SH73A0) ||\
defined(CONFIG_ARCH_SH7367) ||\
defined(CONFIG_ARCH_SH7377) ||\
- defined(CONFIG_ARCH_SH7372)
+ defined(CONFIG_ARCH_SH7372) ||\
+ defined(CONFIG_ARCH_R8A7740)
+
# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf)
--
1.7.5.4
^ permalink raw reply related
* [PATCH 12/20] ARM: mach-shmobile: r8a7740: add PFC support.
From: Kuninori Morimoto @ 2011-11-11 2:46 UTC (permalink / raw)
To: linux-sh
This adds PFC support for the R8A7740 (R-Mobile A1) CPU
This patch is based on v0.1 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/Makefile | 1 +
arch/arm/mach-shmobile/pfc-r8a7740.c | 2562 ++++++++++++++++++++++++++++++++++
2 files changed, 2563 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-shmobile/pfc-r8a7740.c
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index d61f1ec..2bd2d3b 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -24,6 +24,7 @@ pfc-$(CONFIG_ARCH_SH7367) += pfc-sh7367.o
pfc-$(CONFIG_ARCH_SH7377) += pfc-sh7377.o
pfc-$(CONFIG_ARCH_SH7372) += pfc-sh7372.o
pfc-$(CONFIG_ARCH_SH73A0) += pfc-sh73a0.o
+pfc-$(CONFIG_ARCH_R8A7740) += pfc-r8a7740.o
# IRQ objects
obj-$(CONFIG_ARCH_SH7367) += entry-intc.o
diff --git a/arch/arm/mach-shmobile/pfc-r8a7740.c b/arch/arm/mach-shmobile/pfc-r8a7740.c
new file mode 100644
index 0000000..a4fff69
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-r8a7740.c
@@ -0,0 +1,2562 @@
+/*
+ * R8A7740 processor support
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/r8a7740.h>
+
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \
+ PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx), \
+ PORT_10(fn, pfx##20, sfx), \
+ PORT_1(fn, pfx##210, sfx), PORT_1(fn, pfx##211, sfx)
+
+enum {
+ PINMUX_RESERVED = 0,
+
+ /* PORT0_DATA -> PORT211_DATA */
+ PINMUX_DATA_BEGIN,
+ PORT_ALL(DATA),
+ PINMUX_DATA_END,
+
+ /* PORT0_IN -> PORT211_IN */
+ PINMUX_INPUT_BEGIN,
+ PORT_ALL(IN),
+ PINMUX_INPUT_END,
+
+ /* PORT0_IN_PU -> PORT211_IN_PU */
+ PINMUX_INPUT_PULLUP_BEGIN,
+ PORT_ALL(IN_PU),
+ PINMUX_INPUT_PULLUP_END,
+
+ /* PORT0_IN_PD -> PORT211_IN_PD */
+ PINMUX_INPUT_PULLDOWN_BEGIN,
+ PORT_ALL(IN_PD),
+ PINMUX_INPUT_PULLDOWN_END,
+
+ /* PORT0_OUT -> PORT211_OUT */
+ PINMUX_OUTPUT_BEGIN,
+ PORT_ALL(OUT),
+ PINMUX_OUTPUT_END,
+
+ PINMUX_FUNCTION_BEGIN,
+ PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT211_FN_IN */
+ PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT211_FN_OUT */
+ PORT_ALL(FN0), /* PORT0_FN0 -> PORT211_FN0 */
+ PORT_ALL(FN1), /* PORT0_FN1 -> PORT211_FN1 */
+ PORT_ALL(FN2), /* PORT0_FN2 -> PORT211_FN2 */
+ PORT_ALL(FN3), /* PORT0_FN3 -> PORT211_FN3 */
+ PORT_ALL(FN4), /* PORT0_FN4 -> PORT211_FN4 */
+ PORT_ALL(FN5), /* PORT0_FN5 -> PORT211_FN5 */
+ PORT_ALL(FN6), /* PORT0_FN6 -> PORT211_FN6 */
+ PORT_ALL(FN7), /* PORT0_FN7 -> PORT211_FN7 */
+
+ MSEL1CR_31_0, MSEL1CR_31_1,
+ MSEL1CR_30_0, MSEL1CR_30_1,
+ MSEL1CR_29_0, MSEL1CR_29_1,
+ MSEL1CR_28_0, MSEL1CR_28_1,
+ MSEL1CR_27_0, MSEL1CR_27_1,
+ MSEL1CR_26_0, MSEL1CR_26_1,
+ MSEL1CR_16_0, MSEL1CR_16_1,
+ MSEL1CR_15_0, MSEL1CR_15_1,
+ MSEL1CR_14_0, MSEL1CR_14_1,
+ MSEL1CR_13_0, MSEL1CR_13_1,
+ MSEL1CR_12_0, MSEL1CR_12_1,
+ MSEL1CR_9_0, MSEL1CR_9_1,
+ MSEL1CR_7_0, MSEL1CR_7_1,
+ MSEL1CR_6_0, MSEL1CR_6_1,
+ MSEL1CR_5_0, MSEL1CR_5_1,
+ MSEL1CR_4_0, MSEL1CR_4_1,
+ MSEL1CR_3_0, MSEL1CR_3_1,
+ MSEL1CR_2_0, MSEL1CR_2_1,
+ MSEL1CR_0_0, MSEL1CR_0_1,
+
+ MSEL3CR_15_0, MSEL3CR_15_1, /* Trace / Debug ? */
+ MSEL3CR_6_0, MSEL3CR_6_1,
+
+ MSEL4CR_19_0, MSEL4CR_19_1,
+ MSEL4CR_18_0, MSEL4CR_18_1,
+ MSEL4CR_15_0, MSEL4CR_15_1,
+ MSEL4CR_10_0, MSEL4CR_10_1,
+ MSEL4CR_6_0, MSEL4CR_6_1,
+ MSEL4CR_4_0, MSEL4CR_4_1,
+ MSEL4CR_1_0, MSEL4CR_1_1,
+
+ MSEL5CR_31_0, MSEL5CR_31_1, /* irq/fiq output */
+ MSEL5CR_30_0, MSEL5CR_30_1,
+ MSEL5CR_29_0, MSEL5CR_29_1,
+ MSEL5CR_27_0, MSEL5CR_27_1,
+ MSEL5CR_25_0, MSEL5CR_25_1,
+ MSEL5CR_23_0, MSEL5CR_23_1,
+ MSEL5CR_21_0, MSEL5CR_21_1,
+ MSEL5CR_19_0, MSEL5CR_19_1,
+ MSEL5CR_17_0, MSEL5CR_17_1,
+ MSEL5CR_15_0, MSEL5CR_15_1,
+ MSEL5CR_14_0, MSEL5CR_14_1,
+ MSEL5CR_13_0, MSEL5CR_13_1,
+ MSEL5CR_12_0, MSEL5CR_12_1,
+ MSEL5CR_11_0, MSEL5CR_11_1,
+ MSEL5CR_10_0, MSEL5CR_10_1,
+ MSEL5CR_8_0, MSEL5CR_8_1,
+ MSEL5CR_7_0, MSEL5CR_7_1,
+ MSEL5CR_6_0, MSEL5CR_6_1,
+ MSEL5CR_5_0, MSEL5CR_5_1,
+ MSEL5CR_4_0, MSEL5CR_4_1,
+ MSEL5CR_3_0, MSEL5CR_3_1,
+ MSEL5CR_2_0, MSEL5CR_2_1,
+ MSEL5CR_0_0, MSEL5CR_0_1,
+ PINMUX_FUNCTION_END,
+
+ PINMUX_MARK_BEGIN,
+
+ /* IRQ */
+ IRQ0_PORT2_MARK, IRQ0_PORT13_MARK,
+ IRQ1_MARK,
+ IRQ2_PORT11_MARK, IRQ2_PORT12_MARK,
+ IRQ3_PORT10_MARK, IRQ3_PORT14_MARK,
+ IRQ4_PORT15_MARK, IRQ4_PORT172_MARK,
+ IRQ5_PORT0_MARK, IRQ5_PORT1_MARK,
+ IRQ6_PORT121_MARK, IRQ6_PORT173_MARK,
+ IRQ7_PORT120_MARK, IRQ7_PORT209_MARK,
+ IRQ8_MARK,
+ IRQ9_PORT118_MARK, IRQ9_PORT210_MARK,
+ IRQ10_MARK,
+ IRQ11_MARK,
+ IRQ12_PORT42_MARK, IRQ12_PORT97_MARK,
+ IRQ13_PORT64_MARK, IRQ13_PORT98_MARK,
+ IRQ14_PORT63_MARK, IRQ14_PORT99_MARK,
+ IRQ15_PORT62_MARK, IRQ15_PORT100_MARK,
+ IRQ16_PORT68_MARK, IRQ16_PORT211_MARK,
+ IRQ17_MARK,
+ IRQ18_MARK,
+ IRQ19_MARK,
+ IRQ20_MARK,
+ IRQ21_MARK,
+ IRQ22_MARK,
+ IRQ23_MARK,
+ IRQ24_MARK,
+ IRQ25_MARK,
+ IRQ26_PORT58_MARK, IRQ26_PORT81_MARK,
+ IRQ27_PORT57_MARK, IRQ27_PORT168_MARK,
+ IRQ28_PORT56_MARK, IRQ28_PORT169_MARK,
+ IRQ29_PORT50_MARK, IRQ29_PORT170_MARK,
+ IRQ30_PORT49_MARK, IRQ30_PORT171_MARK,
+ IRQ31_PORT41_MARK, IRQ31_PORT167_MARK,
+
+ /* Function */
+
+ /* DBGT */
+ DBGMDT2_MARK, DBGMDT1_MARK, DBGMDT0_MARK,
+ DBGMD10_MARK, DBGMD11_MARK, DBGMD20_MARK,
+ DBGMD21_MARK,
+
+ /* FSI */
+ FSIAISLD_PORT0_MARK, /* FSIAISLD Port 0/5 */
+ FSIAISLD_PORT5_MARK,
+ FSIASPDIF_PORT9_MARK, /* FSIASPDIF Port 9/18 */
+ FSIASPDIF_PORT18_MARK,
+ FSIAOSLD1_MARK, FSIAOSLD2_MARK, FSIAOLR_MARK,
+ FSIAOBT_MARK, FSIAOSLD_MARK, FSIAOMC_MARK,
+ FSIACK_MARK, FSIAILR_MARK, FSIAIBT_MARK,
+
+ /* FMSI */
+ FMSISLD_PORT1_MARK, /* FMSISLD Port 1/6 */
+ FMSISLD_PORT6_MARK,
+ FMSIILR_MARK, FMSIIBT_MARK, FMSIOLR_MARK, FMSIOBT_MARK,
+ FMSICK_MARK, FMSOILR_MARK, FMSOIBT_MARK, FMSOOLR_MARK,
+ FMSOOBT_MARK, FMSOSLD_MARK, FMSOCK_MARK,
+
+ /* SCIFA0 */
+ SCIFA0_SCK_MARK, SCIFA0_CTS_MARK, SCIFA0_RTS_MARK,
+ SCIFA0_RXD_MARK, SCIFA0_TXD_MARK,
+
+ /* SCIFA1 */
+ SCIFA1_CTS_MARK, SCIFA1_SCK_MARK, SCIFA1_RXD_MARK,
+ SCIFA1_TXD_MARK, SCIFA1_RTS_MARK,
+
+ /* SCIFA2 */
+ SCIFA2_SCK_PORT22_MARK, /* SCIFA2_SCK Port 22/199 */
+ SCIFA2_SCK_PORT199_MARK,
+ SCIFA2_RXD_MARK, SCIFA2_TXD_MARK,
+ SCIFA2_CTS_MARK, SCIFA2_RTS_MARK,
+
+ /* SCIFA3 */
+ SCIFA3_RTS_PORT105_MARK, /* MSEL5CR_8_0 */
+ SCIFA3_SCK_PORT116_MARK,
+ SCIFA3_CTS_PORT117_MARK,
+ SCIFA3_RXD_PORT174_MARK,
+ SCIFA3_TXD_PORT175_MARK,
+
+ SCIFA3_RTS_PORT161_MARK, /* MSEL5CR_8_1 */
+ SCIFA3_SCK_PORT158_MARK,
+ SCIFA3_CTS_PORT162_MARK,
+ SCIFA3_RXD_PORT159_MARK,
+ SCIFA3_TXD_PORT160_MARK,
+
+ /* SCIFA4 */
+ SCIFA4_RXD_PORT12_MARK, /* MSEL5CR[12:11] = 00 */
+ SCIFA4_TXD_PORT13_MARK,
+
+ SCIFA4_RXD_PORT204_MARK, /* MSEL5CR[12:11] = 01 */
+ SCIFA4_TXD_PORT203_MARK,
+
+ SCIFA4_RXD_PORT94_MARK, /* MSEL5CR[12:11] = 10 */
+ SCIFA4_TXD_PORT93_MARK,
+
+ SCIFA4_SCK_PORT21_MARK, /* SCIFA4_SCK Port 21/205 */
+ SCIFA4_SCK_PORT205_MARK,
+
+ /* SCIFA5 */
+ SCIFA5_TXD_PORT20_MARK, /* MSEL5CR[15:14] = 00 */
+ SCIFA5_RXD_PORT10_MARK,
+
+ SCIFA5_RXD_PORT207_MARK, /* MSEL5CR[15:14] = 01 */
+ SCIFA5_TXD_PORT208_MARK,
+
+ SCIFA5_TXD_PORT91_MARK, /* MSEL5CR[15:14] = 10 */
+ SCIFA5_RXD_PORT92_MARK,
+
+ SCIFA5_SCK_PORT23_MARK, /* SCIFA5_SCK Port 23/206 */
+ SCIFA5_SCK_PORT206_MARK,
+
+ /* SCIFA6 */
+ SCIFA6_SCK_MARK, SCIFA6_RXD_MARK, SCIFA6_TXD_MARK,
+
+ /* SCIFA7 */
+ SCIFA7_TXD_MARK, SCIFA7_RXD_MARK,
+
+ /* SCIFAB */
+ SCIFB_SCK_PORT190_MARK, /* MSEL5CR_17_0 */
+ SCIFB_RXD_PORT191_MARK,
+ SCIFB_TXD_PORT192_MARK,
+ SCIFB_RTS_PORT186_MARK,
+ SCIFB_CTS_PORT187_MARK,
+
+ SCIFB_SCK_PORT2_MARK, /* MSEL5CR_17_1 */
+ SCIFB_RXD_PORT3_MARK,
+ SCIFB_TXD_PORT4_MARK,
+ SCIFB_RTS_PORT172_MARK,
+ SCIFB_CTS_PORT173_MARK,
+
+ /* LCD0 */
+ LCDC0_SELECT_MARK,
+
+ LCD0_D0_MARK, LCD0_D1_MARK, LCD0_D2_MARK, LCD0_D3_MARK,
+ LCD0_D4_MARK, LCD0_D5_MARK, LCD0_D6_MARK, LCD0_D7_MARK,
+ LCD0_D8_MARK, LCD0_D9_MARK, LCD0_D10_MARK, LCD0_D11_MARK,
+ LCD0_D12_MARK, LCD0_D13_MARK, LCD0_D14_MARK, LCD0_D15_MARK,
+ LCD0_D16_MARK, LCD0_D17_MARK,
+ LCD0_DON_MARK, LCD0_VCPWC_MARK, LCD0_VEPWC_MARK,
+ LCD0_DCK_MARK, LCD0_VSYN_MARK, /* for RGB */
+ LCD0_HSYN_MARK, LCD0_DISP_MARK, /* for RGB */
+ LCD0_WR_MARK, LCD0_RD_MARK, /* for SYS */
+ LCD0_CS_MARK, LCD0_RS_MARK, /* for SYS */
+
+ LCD0_D21_PORT158_MARK, LCD0_D23_PORT159_MARK, /* MSEL5CR_6_1 */
+ LCD0_D22_PORT160_MARK, LCD0_D20_PORT161_MARK,
+ LCD0_D19_PORT162_MARK, LCD0_D18_PORT163_MARK,
+ LCD0_LCLK_PORT165_MARK,
+
+ LCD0_D18_PORT40_MARK, LCD0_D22_PORT0_MARK, /* MSEL5CR_6_0 */
+ LCD0_D23_PORT1_MARK, LCD0_D21_PORT2_MARK,
+ LCD0_D20_PORT3_MARK, LCD0_D19_PORT4_MARK,
+ LCD0_LCLK_PORT102_MARK,
+
+ /* LCD1 */
+ LCDC1_SELECT_MARK,
+
+ LCD1_D0_MARK, LCD1_D1_MARK, LCD1_D2_MARK, LCD1_D3_MARK,
+ LCD1_D4_MARK, LCD1_D5_MARK, LCD1_D6_MARK, LCD1_D7_MARK,
+ LCD1_D8_MARK, LCD1_D9_MARK, LCD1_D10_MARK, LCD1_D11_MARK,
+ LCD1_D12_MARK, LCD1_D13_MARK, LCD1_D14_MARK, LCD1_D15_MARK,
+ LCD1_D16_MARK, LCD1_D17_MARK, LCD1_D18_MARK, LCD1_D19_MARK,
+ LCD1_D20_MARK, LCD1_D21_MARK, LCD1_D22_MARK, LCD1_D23_MARK,
+ LCD1_DON_MARK, LCD1_VCPWC_MARK,
+ LCD1_LCLK_MARK, LCD1_VEPWC_MARK,
+
+ LCD1_DCK_MARK, LCD1_VSYN_MARK, /* for RGB */
+ LCD1_HSYN_MARK, LCD1_DISP_MARK, /* for RGB */
+ LCD1_RS_MARK, LCD1_CS_MARK, /* for SYS */
+ LCD1_RD_MARK, LCD1_WR_MARK, /* for SYS */
+
+ /* RSPI */
+ RSPI_SSL0_A_MARK, RSPI_SSL1_A_MARK, RSPI_SSL2_A_MARK,
+ RSPI_SSL3_A_MARK, RSPI_CK_A_MARK, RSPI_MOSI_A_MARK,
+ RSPI_MISO_A_MARK,
+
+ /* VIO CKO */
+ VIO_CKO1_MARK, /* needs fixup */
+ VIO_CKO2_MARK,
+ VIO_CKO_1_MARK,
+ VIO_CKO_MARK,
+
+ /* VIO0 */
+ VIO0_D0_MARK, VIO0_D1_MARK, VIO0_D2_MARK, VIO0_D3_MARK,
+ VIO0_D4_MARK, VIO0_D5_MARK, VIO0_D6_MARK, VIO0_D7_MARK,
+ VIO0_D8_MARK, VIO0_D9_MARK, VIO0_D10_MARK, VIO0_D11_MARK,
+ VIO0_D12_MARK, VIO0_VD_MARK, VIO0_HD_MARK, VIO0_CLK_MARK,
+ VIO0_FIELD_MARK,
+
+ VIO0_D13_PORT26_MARK, /* MSEL5CR_27_0 */
+ VIO0_D14_PORT25_MARK,
+ VIO0_D15_PORT24_MARK,
+
+ VIO0_D13_PORT22_MARK, /* MSEL5CR_27_1 */
+ VIO0_D14_PORT95_MARK,
+ VIO0_D15_PORT96_MARK,
+
+ /* VIO1 */
+ VIO1_D0_MARK, VIO1_D1_MARK, VIO1_D2_MARK, VIO1_D3_MARK,
+ VIO1_D4_MARK, VIO1_D5_MARK, VIO1_D6_MARK, VIO1_D7_MARK,
+ VIO1_VD_MARK, VIO1_HD_MARK, VIO1_CLK_MARK, VIO1_FIELD_MARK,
+
+ /* TPU0 */
+ TPU0TO0_MARK, TPU0TO1_MARK, TPU0TO3_MARK,
+ TPU0TO2_PORT66_MARK, /* TPU0TO2 Port 66/202 */
+ TPU0TO2_PORT202_MARK,
+
+ /* SSP1 0 */
+ STP0_IPD0_MARK, STP0_IPD1_MARK, STP0_IPD2_MARK, STP0_IPD3_MARK,
+ STP0_IPD4_MARK, STP0_IPD5_MARK, STP0_IPD6_MARK, STP0_IPD7_MARK,
+ STP0_IPEN_MARK, STP0_IPCLK_MARK, STP0_IPSYNC_MARK,
+
+ /* SSP1 1 */
+ STP1_IPD1_MARK, STP1_IPD2_MARK, STP1_IPD3_MARK, STP1_IPD4_MARK,
+ STP1_IPD5_MARK, STP1_IPD6_MARK, STP1_IPD7_MARK, STP1_IPCLK_MARK,
+ STP1_IPSYNC_MARK,
+
+ STP1_IPD0_PORT186_MARK, /* MSEL5CR_23_0 */
+ STP1_IPEN_PORT187_MARK,
+
+ STP1_IPD0_PORT194_MARK, /* MSEL5CR_23_1 */
+ STP1_IPEN_PORT193_MARK,
+
+ /* SIM */
+ SIM_RST_MARK, SIM_CLK_MARK,
+ SIM_D_PORT22_MARK, /* SIM_D Port 22/199 */
+ SIM_D_PORT199_MARK,
+
+ /* SDHI0 */
+ SDHI0_D0_MARK, SDHI0_D1_MARK, SDHI0_D2_MARK, SDHI0_D3_MARK,
+ SDHI0_CD_MARK, SDHI0_WP_MARK, SDHI0_CMD_MARK, SDHI0_CLK_MARK,
+
+ /* SDHI1 */
+ SDHI1_D0_MARK, SDHI1_D1_MARK, SDHI1_D2_MARK, SDHI1_D3_MARK,
+ SDHI1_CD_MARK, SDHI1_WP_MARK, SDHI1_CMD_MARK, SDHI1_CLK_MARK,
+
+ /* SDHI2 */
+ SDHI2_D0_MARK, SDHI2_D1_MARK, SDHI2_D2_MARK, SDHI2_D3_MARK,
+ SDHI2_CLK_MARK, SDHI2_CMD_MARK,
+
+ SDHI2_CD_PORT24_MARK, /* MSEL5CR_19_0 */
+ SDHI2_WP_PORT25_MARK,
+
+ SDHI2_WP_PORT177_MARK, /* MSEL5CR_19_1 */
+ SDHI2_CD_PORT202_MARK,
+
+ /* MSIOF2 */
+ MSIOF2_TXD_MARK, MSIOF2_RXD_MARK, MSIOF2_TSCK_MARK,
+ MSIOF2_SS2_MARK, MSIOF2_TSYNC_MARK, MSIOF2_SS1_MARK,
+ MSIOF2_MCK1_MARK, MSIOF2_MCK0_MARK, MSIOF2_RSYNC_MARK,
+ MSIOF2_RSCK_MARK,
+
+ /* KEYSC */
+ KEYIN4_MARK, KEYIN5_MARK, KEYIN6_MARK, KEYIN7_MARK,
+ KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK,
+ KEYOUT4_MARK, KEYOUT5_MARK, KEYOUT6_MARK, KEYOUT7_MARK,
+
+ KEYIN0_PORT43_MARK, /* MSEL4CR_18_0 */
+ KEYIN1_PORT44_MARK,
+ KEYIN2_PORT45_MARK,
+ KEYIN3_PORT46_MARK,
+
+ KEYIN0_PORT58_MARK, /* MSEL4CR_18_1 */
+ KEYIN1_PORT57_MARK,
+ KEYIN2_PORT56_MARK,
+ KEYIN3_PORT55_MARK,
+
+ /* VOU */
+ DV_D0_MARK, DV_D1_MARK, DV_D2_MARK, DV_D3_MARK,
+ DV_D4_MARK, DV_D5_MARK, DV_D6_MARK, DV_D7_MARK,
+ DV_D8_MARK, DV_D9_MARK, DV_D10_MARK, DV_D11_MARK,
+ DV_D12_MARK, DV_D13_MARK, DV_D14_MARK, DV_D15_MARK,
+ DV_CLK_MARK, DV_VSYNC_MARK, DV_HSYNC_MARK,
+
+ /* MEMC */
+ MEMC_AD0_MARK, MEMC_AD1_MARK, MEMC_AD2_MARK, MEMC_AD3_MARK,
+ MEMC_AD4_MARK, MEMC_AD5_MARK, MEMC_AD6_MARK, MEMC_AD7_MARK,
+ MEMC_AD8_MARK, MEMC_AD9_MARK, MEMC_AD10_MARK, MEMC_AD11_MARK,
+ MEMC_AD12_MARK, MEMC_AD13_MARK, MEMC_AD14_MARK, MEMC_AD15_MARK,
+ MEMC_CS0_MARK, MEMC_INT_MARK, MEMC_NWE_MARK, MEMC_NOE_MARK,
+
+ MEMC_CS1_MARK, /* MSEL4CR_6_0 */
+ MEMC_ADV_MARK,
+ MEMC_WAIT_MARK,
+ MEMC_BUSCLK_MARK,
+
+ MEMC_A1_MARK, /* MSEL4CR_6_1 */
+ MEMC_DREQ0_MARK,
+ MEMC_DREQ1_MARK,
+ MEMC_A0_MARK,
+
+ /* MMC */
+ MMC0_D0_PORT68_MARK, MMC0_D1_PORT69_MARK, MMC0_D2_PORT70_MARK,
+ MMC0_D3_PORT71_MARK, MMC0_D4_PORT72_MARK, MMC0_D5_PORT73_MARK,
+ MMC0_D6_PORT74_MARK, MMC0_D7_PORT75_MARK, MMC0_CLK_PORT66_MARK,
+ MMC0_CMD_PORT67_MARK, /* MSEL4CR_15_0 */
+
+ MMC1_D0_PORT149_MARK, MMC1_D1_PORT148_MARK, MMC1_D2_PORT147_MARK,
+ MMC1_D3_PORT146_MARK, MMC1_D4_PORT145_MARK, MMC1_D5_PORT144_MARK,
+ MMC1_D6_PORT143_MARK, MMC1_D7_PORT142_MARK, MMC1_CLK_PORT103_MARK,
+ MMC1_CMD_PORT104_MARK, /* MSEL4CR_15_1 */
+
+ /* MSIOF0 */
+ MSIOF0_SS1_MARK, MSIOF0_SS2_MARK, MSIOF0_RXD_MARK,
+ MSIOF0_TXD_MARK, MSIOF0_MCK0_MARK, MSIOF0_MCK1_MARK,
+ MSIOF0_RSYNC_MARK, MSIOF0_RSCK_MARK, MSIOF0_TSCK_MARK,
+ MSIOF0_TSYNC_MARK,
+
+ /* MSIOF1 */
+ MSIOF1_RSCK_MARK, MSIOF1_RSYNC_MARK,
+ MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK,
+
+ MSIOF1_SS2_PORT116_MARK, MSIOF1_SS1_PORT117_MARK,
+ MSIOF1_RXD_PORT118_MARK, MSIOF1_TXD_PORT119_MARK,
+ MSIOF1_TSYNC_PORT120_MARK,
+ MSIOF1_TSCK_PORT121_MARK, /* MSEL4CR_10_0 */
+
+ MSIOF1_SS1_PORT67_MARK, MSIOF1_TSCK_PORT72_MARK,
+ MSIOF1_TSYNC_PORT73_MARK, MSIOF1_TXD_PORT74_MARK,
+ MSIOF1_RXD_PORT75_MARK,
+ MSIOF1_SS2_PORT202_MARK, /* MSEL4CR_10_1 */
+
+ /* GPIO */
+ GPO0_MARK, GPI0_MARK, GPO1_MARK, GPI1_MARK,
+
+ /* USB0 */
+ USB0_OCI_MARK, USB0_PPON_MARK, VBUS_MARK,
+
+ /* USB1 */
+ USB1_OCI_MARK, USB1_PPON_MARK,
+
+ /* BBIF1 */
+ BBIF1_RXD_MARK, BBIF1_TXD_MARK, BBIF1_TSYNC_MARK,
+ BBIF1_TSCK_MARK, BBIF1_RSCK_MARK, BBIF1_RSYNC_MARK,
+ BBIF1_FLOW_MARK, BBIF1_RX_FLOW_N_MARK,
+
+ /* BBIF2 */
+ BBIF2_TXD2_PORT5_MARK, /* MSEL5CR_0_0 */
+ BBIF2_RXD2_PORT60_MARK,
+ BBIF2_TSYNC2_PORT6_MARK,
+ BBIF2_TSCK2_PORT59_MARK,
+
+ BBIF2_RXD2_PORT90_MARK, /* MSEL5CR_0_1 */
+ BBIF2_TXD2_PORT183_MARK,
+ BBIF2_TSCK2_PORT89_MARK,
+ BBIF2_TSYNC2_PORT184_MARK,
+
+ /* BSC / FLCTL / PCMCIA */
+ CS0_MARK, CS2_MARK, CS4_MARK,
+ CS5B_MARK, CS6A_MARK,
+ CS5A_PORT105_MARK, /* CS5A PORT 19/105 */
+ CS5A_PORT19_MARK,
+ IOIS16_MARK, /* ? */
+
+ A0_MARK, A1_MARK, A2_MARK, A3_MARK,
+ A4_FOE_MARK, /* share with FLCTL */
+ A5_FCDE_MARK, /* share with FLCTL */
+ A6_MARK, A7_MARK, A8_MARK, A9_MARK,
+ A10_MARK, A11_MARK, A12_MARK, A13_MARK,
+ A14_MARK, A15_MARK, A16_MARK, A17_MARK,
+ A18_MARK, A19_MARK, A20_MARK, A21_MARK,
+ A22_MARK, A23_MARK, A24_MARK, A25_MARK,
+ A26_MARK,
+
+ D0_NAF0_MARK, D1_NAF1_MARK, D2_NAF2_MARK, /* share with FLCTL */
+ D3_NAF3_MARK, D4_NAF4_MARK, D5_NAF5_MARK, /* share with FLCTL */
+ D6_NAF6_MARK, D7_NAF7_MARK, D8_NAF8_MARK, /* share with FLCTL */
+ D9_NAF9_MARK, D10_NAF10_MARK, D11_NAF11_MARK, /* share with FLCTL */
+ D12_NAF12_MARK, D13_NAF13_MARK, D14_NAF14_MARK, /* share with FLCTL */
+ D15_NAF15_MARK, /* share with FLCTL */
+ D16_MARK, D17_MARK, D18_MARK, D19_MARK,
+ D20_MARK, D21_MARK, D22_MARK, D23_MARK,
+ D24_MARK, D25_MARK, D26_MARK, D27_MARK,
+ D28_MARK, D29_MARK, D30_MARK, D31_MARK,
+
+ WE0_FWE_MARK, /* share with FLCTL */
+ WE1_MARK,
+ WE2_ICIORD_MARK, /* share with PCMCIA */
+ WE3_ICIOWR_MARK, /* share with PCMCIA */
+ CKO_MARK, BS_MARK, RDWR_MARK,
+ RD_FSC_MARK, /* share with FLCTL */
+ WAIT_PORT177_MARK, /* WAIT Port 90/177 */
+ WAIT_PORT90_MARK,
+
+ FCE0_MARK, FCE1_MARK, FRB_MARK, /* FLCTL */
+
+ /* IRDA */
+ IRDA_FIRSEL_MARK, IRDA_IN_MARK, IRDA_OUT_MARK,
+
+ /* ATAPI */
+ IDE_D0_MARK, IDE_D1_MARK, IDE_D2_MARK, IDE_D3_MARK,
+ IDE_D4_MARK, IDE_D5_MARK, IDE_D6_MARK, IDE_D7_MARK,
+ IDE_D8_MARK, IDE_D9_MARK, IDE_D10_MARK, IDE_D11_MARK,
+ IDE_D12_MARK, IDE_D13_MARK, IDE_D14_MARK, IDE_D15_MARK,
+ IDE_A0_MARK, IDE_A1_MARK, IDE_A2_MARK, IDE_CS0_MARK,
+ IDE_CS1_MARK, IDE_IOWR_MARK, IDE_IORD_MARK, IDE_IORDY_MARK,
+ IDE_INT_MARK, IDE_RST_MARK, IDE_DIRECTION_MARK,
+ IDE_EXBUF_ENB_MARK, IDE_IODACK_MARK, IDE_IODREQ_MARK,
+
+ /* RMII */
+ RMII_CRS_DV_MARK, RMII_RX_ER_MARK, RMII_RXD0_MARK,
+ RMII_RXD1_MARK, RMII_TX_EN_MARK, RMII_TXD0_MARK,
+ RMII_MDC_MARK, RMII_TXD1_MARK, RMII_MDIO_MARK,
+ RMII_REF50CK_MARK, /* for RMII */
+ RMII_REF125CK_MARK, /* for GMII */
+
+ /* GEther */
+ ET_TX_CLK_MARK, ET_TX_EN_MARK, ET_ETXD0_MARK, ET_ETXD1_MARK,
+ ET_ETXD2_MARK, ET_ETXD3_MARK,
+ ET_ETXD4_MARK, ET_ETXD5_MARK, /* for GEther */
+ ET_ETXD6_MARK, ET_ETXD7_MARK, /* for GEther */
+ ET_COL_MARK, ET_TX_ER_MARK, ET_RX_CLK_MARK, ET_RX_DV_MARK,
+ ET_ERXD0_MARK, ET_ERXD1_MARK, ET_ERXD2_MARK, ET_ERXD3_MARK,
+ ET_ERXD4_MARK, ET_ERXD5_MARK, /* for GEther */
+ ET_ERXD6_MARK, ET_ERXD7_MARK, /* for GEther */
+ ET_RX_ER_MARK, ET_CRS_MARK, ET_MDC_MARK, ET_MDIO_MARK,
+ ET_LINK_MARK, ET_PHY_INT_MARK, ET_WOL_MARK, ET_GTX_CLK_MARK,
+
+ /* DMA0 */
+ DREQ0_MARK, DACK0_MARK,
+
+ /* DMA1 */
+ DREQ1_MARK, DACK1_MARK,
+
+ /* SYSC */
+ RESETOUTS_MARK, RESETP_PULLUP_MARK, RESETP_PLAIN_MARK,
+
+ /* IRREM */
+ IROUT_MARK,
+
+ /* SDENC */
+ SDENC_CPG_MARK, SDENC_DV_CLKI_MARK,
+
+ /* DEBUG */
+ EDEBGREQ_PULLUP_MARK, /* for JTAG */
+ EDEBGREQ_PULLDOWN_MARK,
+
+ TRACEAUD_FROM_VIO_MARK, /* for TRACE/AUD */
+ TRACEAUD_FROM_LCDC0_MARK,
+ TRACEAUD_FROM_MEMC_MARK,
+
+ PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+ /* specify valid pin states for each pin in GPIO mode */
+
+ /* I/O and Pull U/D */
+ PORT_DATA_IO_PD(0), PORT_DATA_IO_PD(1),
+ PORT_DATA_IO_PD(2), PORT_DATA_IO_PD(3),
+ PORT_DATA_IO_PD(4), PORT_DATA_IO_PD(5),
+ PORT_DATA_IO_PD(6), PORT_DATA_IO(7),
+ PORT_DATA_IO(8), PORT_DATA_IO(9),
+
+ PORT_DATA_IO_PD(10), PORT_DATA_IO_PD(11),
+ PORT_DATA_IO_PD(12), PORT_DATA_IO_PU_PD(13),
+ PORT_DATA_IO_PD(14), PORT_DATA_IO_PD(15),
+ PORT_DATA_IO_PD(16), PORT_DATA_IO_PD(17),
+ PORT_DATA_IO(18), PORT_DATA_IO_PU(19),
+
+ PORT_DATA_IO_PU_PD(20), PORT_DATA_IO_PD(21),
+ PORT_DATA_IO_PU_PD(22), PORT_DATA_IO(23),
+ PORT_DATA_IO_PU(24), PORT_DATA_IO_PU(25),
+ PORT_DATA_IO_PU(26), PORT_DATA_IO_PU(27),
+ PORT_DATA_IO_PU(28), PORT_DATA_IO_PU(29),
+
+ PORT_DATA_IO_PU(30), PORT_DATA_IO_PD(31),
+ PORT_DATA_IO_PD(32), PORT_DATA_IO_PD(33),
+ PORT_DATA_IO_PD(34), PORT_DATA_IO_PU(35),
+ PORT_DATA_IO_PU(36), PORT_DATA_IO_PD(37),
+ PORT_DATA_IO_PU(38), PORT_DATA_IO_PD(39),
+
+ PORT_DATA_IO_PU_PD(40), PORT_DATA_IO_PD(41),
+ PORT_DATA_IO_PD(42), PORT_DATA_IO_PU_PD(43),
+ PORT_DATA_IO_PU_PD(44), PORT_DATA_IO_PU_PD(45),
+ PORT_DATA_IO_PU_PD(46), PORT_DATA_IO_PU_PD(47),
+ PORT_DATA_IO_PU_PD(48), PORT_DATA_IO_PU_PD(49),
+
+ PORT_DATA_IO_PU_PD(50), PORT_DATA_IO_PD(51),
+ PORT_DATA_IO_PD(52), PORT_DATA_IO_PD(53),
+ PORT_DATA_IO_PD(54), PORT_DATA_IO_PU_PD(55),
+ PORT_DATA_IO_PU_PD(56), PORT_DATA_IO_PU_PD(57),
+ PORT_DATA_IO_PU_PD(58), PORT_DATA_IO_PU_PD(59),
+
+ PORT_DATA_IO_PU_PD(60), PORT_DATA_IO_PD(61),
+ PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63),
+ PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65),
+ PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67),
+ PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69),
+
+ PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71),
+ PORT_DATA_IO_PU_PD(72), PORT_DATA_IO_PU_PD(73),
+ PORT_DATA_IO_PU_PD(74), PORT_DATA_IO_PU_PD(75),
+ PORT_DATA_IO_PU_PD(76), PORT_DATA_IO_PU_PD(77),
+ PORT_DATA_IO_PU_PD(78), PORT_DATA_IO_PU_PD(79),
+
+ PORT_DATA_IO_PU_PD(80), PORT_DATA_IO_PU_PD(81),
+ PORT_DATA_IO(82), PORT_DATA_IO_PU_PD(83),
+ PORT_DATA_IO(84), PORT_DATA_IO_PD(85),
+ PORT_DATA_IO_PD(86), PORT_DATA_IO_PD(87),
+ PORT_DATA_IO_PD(88), PORT_DATA_IO_PD(89),
+
+ PORT_DATA_IO_PD(90), PORT_DATA_IO_PU_PD(91),
+ PORT_DATA_IO_PU_PD(92), PORT_DATA_IO_PU_PD(93),
+ PORT_DATA_IO_PU_PD(94), PORT_DATA_IO_PU_PD(95),
+ PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97),
+ PORT_DATA_IO_PU_PD(98), PORT_DATA_IO_PU_PD(99),
+
+ PORT_DATA_IO_PU_PD(100), PORT_DATA_IO(101),
+ PORT_DATA_IO_PU(102), PORT_DATA_IO_PU_PD(103),
+ PORT_DATA_IO_PU(104), PORT_DATA_IO_PU(105),
+ PORT_DATA_IO_PU_PD(106), PORT_DATA_IO(107),
+ PORT_DATA_IO(108), PORT_DATA_IO(109),
+
+ PORT_DATA_IO(110), PORT_DATA_IO(111),
+ PORT_DATA_IO(112), PORT_DATA_IO(113),
+ PORT_DATA_IO_PU_PD(114), PORT_DATA_IO(115),
+ PORT_DATA_IO_PD(116), PORT_DATA_IO_PD(117),
+ PORT_DATA_IO_PD(118), PORT_DATA_IO_PD(119),
+
+ PORT_DATA_IO_PD(120), PORT_DATA_IO_PD(121),
+ PORT_DATA_IO_PD(122), PORT_DATA_IO_PD(123),
+ PORT_DATA_IO_PD(124), PORT_DATA_IO(125),
+ PORT_DATA_IO(126), PORT_DATA_IO(127),
+ PORT_DATA_IO(128), PORT_DATA_IO(129),
+
+ PORT_DATA_IO(130), PORT_DATA_IO(131),
+ PORT_DATA_IO(132), PORT_DATA_IO(133),
+ PORT_DATA_IO(134), PORT_DATA_IO(135),
+ PORT_DATA_IO(136), PORT_DATA_IO(137),
+ PORT_DATA_IO(138), PORT_DATA_IO(139),
+
+ PORT_DATA_IO(140), PORT_DATA_IO(141),
+ PORT_DATA_IO_PU(142), PORT_DATA_IO_PU(143),
+ PORT_DATA_IO_PU(144), PORT_DATA_IO_PU(145),
+ PORT_DATA_IO_PU(146), PORT_DATA_IO_PU(147),
+ PORT_DATA_IO_PU(148), PORT_DATA_IO_PU(149),
+
+ PORT_DATA_IO_PU(150), PORT_DATA_IO_PU(151),
+ PORT_DATA_IO_PU(152), PORT_DATA_IO_PU(153),
+ PORT_DATA_IO_PU(154), PORT_DATA_IO_PU(155),
+ PORT_DATA_IO_PU(156), PORT_DATA_IO_PU(157),
+ PORT_DATA_IO_PD(158), PORT_DATA_IO_PD(159),
+
+ PORT_DATA_IO_PU_PD(160), PORT_DATA_IO_PD(161),
+ PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163),
+ PORT_DATA_IO_PD(164), PORT_DATA_IO_PD(165),
+ PORT_DATA_IO_PU(166), PORT_DATA_IO_PU(167),
+ PORT_DATA_IO_PU(168), PORT_DATA_IO_PU(169),
+
+ PORT_DATA_IO_PU(170), PORT_DATA_IO_PU(171),
+ PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173),
+ PORT_DATA_IO_PD(174), PORT_DATA_IO_PD(175),
+ PORT_DATA_IO_PU(176), PORT_DATA_IO_PU_PD(177),
+ PORT_DATA_IO_PU(178), PORT_DATA_IO_PD(179),
+
+ PORT_DATA_IO_PD(180), PORT_DATA_IO_PU(181),
+ PORT_DATA_IO_PU(182), PORT_DATA_IO(183),
+ PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185),
+ PORT_DATA_IO_PD(186), PORT_DATA_IO_PD(187),
+ PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189),
+
+ PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191),
+ PORT_DATA_IO_PD(192), PORT_DATA_IO_PU_PD(193),
+ PORT_DATA_IO_PU_PD(194), PORT_DATA_IO_PD(195),
+ PORT_DATA_IO_PU_PD(196), PORT_DATA_IO_PD(197),
+ PORT_DATA_IO_PU_PD(198), PORT_DATA_IO_PU_PD(199),
+
+ PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU(201),
+ PORT_DATA_IO_PU_PD(202), PORT_DATA_IO(203),
+ PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205),
+ PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PU_PD(207),
+ PORT_DATA_IO_PU_PD(208), PORT_DATA_IO_PD(209),
+
+ PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211),
+
+ /* Port0 */
+ PINMUX_DATA(DBGMDT2_MARK, PORT0_FN1),
+ PINMUX_DATA(FSIAISLD_PORT0_MARK, PORT0_FN2, MSEL5CR_3_0),
+ PINMUX_DATA(FSIAOSLD1_MARK, PORT0_FN3),
+ PINMUX_DATA(LCD0_D22_PORT0_MARK, PORT0_FN4, MSEL5CR_6_0),
+ PINMUX_DATA(SCIFA7_RXD_MARK, PORT0_FN6),
+ PINMUX_DATA(LCD1_D4_MARK, PORT0_FN7),
+ PINMUX_DATA(IRQ5_PORT0_MARK, PORT0_FN0, MSEL1CR_5_0),
+
+ /* Port1 */
+ PINMUX_DATA(DBGMDT1_MARK, PORT1_FN1),
+ PINMUX_DATA(FMSISLD_PORT1_MARK, PORT1_FN2, MSEL5CR_5_0),
+ PINMUX_DATA(FSIAOSLD2_MARK, PORT1_FN3),
+ PINMUX_DATA(LCD0_D23_PORT1_MARK, PORT1_FN4, MSEL5CR_6_0),
+ PINMUX_DATA(SCIFA7_TXD_MARK, PORT1_FN6),
+ PINMUX_DATA(LCD1_D3_MARK, PORT1_FN7),
+ PINMUX_DATA(IRQ5_PORT1_MARK, PORT1_FN0, MSEL1CR_5_1),
+
+ /* Port2 */
+ PINMUX_DATA(DBGMDT0_MARK, PORT2_FN1),
+ PINMUX_DATA(SCIFB_SCK_PORT2_MARK, PORT2_FN2, MSEL5CR_17_1),
+ PINMUX_DATA(LCD0_D21_PORT2_MARK, PORT2_FN4, MSEL5CR_6_0),
+ PINMUX_DATA(LCD1_D2_MARK, PORT2_FN7),
+ PINMUX_DATA(IRQ0_PORT2_MARK, PORT2_FN0, MSEL1CR_0_1),
+
+ /* Port3 */
+ PINMUX_DATA(DBGMD21_MARK, PORT3_FN1),
+ PINMUX_DATA(SCIFB_RXD_PORT3_MARK, PORT3_FN2, MSEL5CR_17_1),
+ PINMUX_DATA(LCD0_D20_PORT3_MARK, PORT3_FN4, MSEL5CR_6_0),
+ PINMUX_DATA(LCD1_D1_MARK, PORT3_FN7),
+
+ /* Port4 */
+ PINMUX_DATA(DBGMD20_MARK, PORT4_FN1),
+ PINMUX_DATA(SCIFB_TXD_PORT4_MARK, PORT4_FN2, MSEL5CR_17_1),
+ PINMUX_DATA(LCD0_D19_PORT4_MARK, PORT4_FN4, MSEL5CR_6_0),
+ PINMUX_DATA(LCD1_D0_MARK, PORT4_FN7),
+
+ /* Port5 */
+ PINMUX_DATA(DBGMD11_MARK, PORT5_FN1),
+ PINMUX_DATA(BBIF2_TXD2_PORT5_MARK, PORT5_FN2, MSEL5CR_0_0),
+ PINMUX_DATA(FSIAISLD_PORT5_MARK, PORT5_FN4, MSEL5CR_3_1),
+ PINMUX_DATA(RSPI_SSL0_A_MARK, PORT5_FN6),
+ PINMUX_DATA(LCD1_VCPWC_MARK, PORT5_FN7),
+
+ /* Port6 */
+ PINMUX_DATA(DBGMD10_MARK, PORT6_FN1),
+ PINMUX_DATA(BBIF2_TSYNC2_PORT6_MARK, PORT6_FN2, MSEL5CR_0_0),
+ PINMUX_DATA(FMSISLD_PORT6_MARK, PORT6_FN4, MSEL5CR_5_1),
+ PINMUX_DATA(RSPI_SSL1_A_MARK, PORT6_FN6),
+ PINMUX_DATA(LCD1_VEPWC_MARK, PORT6_FN7),
+
+ /* Port7 */
+ PINMUX_DATA(FSIAOLR_MARK, PORT7_FN1),
+
+ /* Port8 */
+ PINMUX_DATA(FSIAOBT_MARK, PORT8_FN1),
+
+ /* Port9 */
+ PINMUX_DATA(FSIAOSLD_MARK, PORT9_FN1),
+ PINMUX_DATA(FSIASPDIF_PORT9_MARK, PORT9_FN2, MSEL5CR_4_0),
+
+ /* Port10 */
+ PINMUX_DATA(FSIAOMC_MARK, PORT10_FN1),
+ PINMUX_DATA(SCIFA5_RXD_PORT10_MARK, PORT10_FN3, MSEL5CR_14_0, MSEL5CR_15_0),
+ PINMUX_DATA(IRQ3_PORT10_MARK, PORT10_FN0, MSEL1CR_3_0),
+
+ /* Port11 */
+ PINMUX_DATA(FSIACK_MARK, PORT11_FN1),
+ PINMUX_DATA(IRQ2_PORT11_MARK, PORT11_FN0, MSEL1CR_2_0),
+
+ /* Port12 */
+ PINMUX_DATA(FSIAILR_MARK, PORT12_FN1),
+ PINMUX_DATA(SCIFA4_RXD_PORT12_MARK, PORT12_FN2, MSEL5CR_12_0, MSEL5CR_11_0),
+ PINMUX_DATA(LCD1_RS_MARK, PORT12_FN6),
+ PINMUX_DATA(LCD1_DISP_MARK, PORT12_FN7),
+ PINMUX_DATA(IRQ2_PORT12_MARK, PORT12_FN0, MSEL1CR_2_1),
+
+ /* Port13 */
+ PINMUX_DATA(FSIAIBT_MARK, PORT13_FN1),
+ PINMUX_DATA(SCIFA4_TXD_PORT13_MARK, PORT13_FN2, MSEL5CR_12_0, MSEL5CR_11_0),
+ PINMUX_DATA(LCD1_RD_MARK, PORT13_FN7),
+ PINMUX_DATA(IRQ0_PORT13_MARK, PORT13_FN0, MSEL1CR_0_0),
+
+ /* Port14 */
+ PINMUX_DATA(FMSOILR_MARK, PORT14_FN1),
+ PINMUX_DATA(FMSIILR_MARK, PORT14_FN2),
+ PINMUX_DATA(VIO_CKO1_MARK, PORT14_FN3),
+ PINMUX_DATA(LCD1_D23_MARK, PORT14_FN7),
+ PINMUX_DATA(IRQ3_PORT14_MARK, PORT14_FN0, MSEL1CR_3_1),
+
+ /* Port15 */
+ PINMUX_DATA(FMSOIBT_MARK, PORT15_FN1),
+ PINMUX_DATA(FMSIIBT_MARK, PORT15_FN2),
+ PINMUX_DATA(VIO_CKO2_MARK, PORT15_FN3),
+ PINMUX_DATA(LCD1_D22_MARK, PORT15_FN7),
+ PINMUX_DATA(IRQ4_PORT15_MARK, PORT15_FN0, MSEL1CR_4_0),
+
+ /* Port16 */
+ PINMUX_DATA(FMSOOLR_MARK, PORT16_FN1),
+ PINMUX_DATA(FMSIOLR_MARK, PORT16_FN2),
+
+ /* Port17 */
+ PINMUX_DATA(FMSOOBT_MARK, PORT17_FN1),
+ PINMUX_DATA(FMSIOBT_MARK, PORT17_FN2),
+
+ /* Port18 */
+ PINMUX_DATA(FMSOSLD_MARK, PORT18_FN1),
+ PINMUX_DATA(FSIASPDIF_PORT18_MARK, PORT18_FN2, MSEL5CR_4_1),
+
+ /* Port19 */
+ PINMUX_DATA(FMSICK_MARK, PORT19_FN1),
+ PINMUX_DATA(CS5A_PORT19_MARK, PORT19_FN7, MSEL5CR_2_1),
+ PINMUX_DATA(IRQ10_MARK, PORT19_FN0),
+
+ /* Port20 */
+ PINMUX_DATA(FMSOCK_MARK, PORT20_FN1),
+ PINMUX_DATA(SCIFA5_TXD_PORT20_MARK, PORT20_FN3, MSEL5CR_15_0, MSEL5CR_14_0),
+ PINMUX_DATA(IRQ1_MARK, PORT20_FN0),
+
+ /* Port21 */
+ PINMUX_DATA(SCIFA1_CTS_MARK, PORT21_FN1),
+ PINMUX_DATA(SCIFA4_SCK_PORT21_MARK, PORT21_FN2, MSEL5CR_10_0),
+ PINMUX_DATA(TPU0TO1_MARK, PORT21_FN4),
+ PINMUX_DATA(VIO1_FIELD_MARK, PORT21_FN5),
+ PINMUX_DATA(STP0_IPD5_MARK, PORT21_FN6),
+ PINMUX_DATA(LCD1_D10_MARK, PORT21_FN7),
+
+ /* Port22 */
+ PINMUX_DATA(SCIFA2_SCK_PORT22_MARK, PORT22_FN1, MSEL5CR_7_0),
+ PINMUX_DATA(SIM_D_PORT22_MARK, PORT22_FN4, MSEL5CR_21_0),
+ PINMUX_DATA(VIO0_D13_PORT22_MARK, PORT22_FN7, MSEL5CR_27_1),
+
+ /* Port23 */
+ PINMUX_DATA(SCIFA1_RTS_MARK, PORT23_FN1),
+ PINMUX_DATA(SCIFA5_SCK_PORT23_MARK, PORT23_FN3, MSEL5CR_13_0),
+ PINMUX_DATA(TPU0TO0_MARK, PORT23_FN4),
+ PINMUX_DATA(VIO_CKO_1_MARK, PORT23_FN5),
+ PINMUX_DATA(STP0_IPD2_MARK, PORT23_FN6),
+ PINMUX_DATA(LCD1_D7_MARK, PORT23_FN7),
+
+ /* Port24 */
+ PINMUX_DATA(VIO0_D15_PORT24_MARK, PORT24_FN1, MSEL5CR_27_0),
+ PINMUX_DATA(VIO1_D7_MARK, PORT24_FN5),
+ PINMUX_DATA(SCIFA6_SCK_MARK, PORT24_FN6),
+ PINMUX_DATA(SDHI2_CD_PORT24_MARK, PORT24_FN7, MSEL5CR_19_0),
+
+ /* Port25 */
+ PINMUX_DATA(VIO0_D14_PORT25_MARK, PORT25_FN1, MSEL5CR_27_0),
+ PINMUX_DATA(VIO1_D6_MARK, PORT25_FN5),
+ PINMUX_DATA(SCIFA6_RXD_MARK, PORT25_FN6),
+ PINMUX_DATA(SDHI2_WP_PORT25_MARK, PORT25_FN7, MSEL5CR_19_0),
+
+ /* Port26 */
+ PINMUX_DATA(VIO0_D13_PORT26_MARK, PORT26_FN1, MSEL5CR_27_0),
+ PINMUX_DATA(VIO1_D5_MARK, PORT26_FN5),
+ PINMUX_DATA(SCIFA6_TXD_MARK, PORT26_FN6),
+
+ /* Port27 - Port39 Function */
+ PINMUX_DATA(VIO0_D7_MARK, PORT27_FN1),
+ PINMUX_DATA(VIO0_D6_MARK, PORT28_FN1),
+ PINMUX_DATA(VIO0_D5_MARK, PORT29_FN1),
+ PINMUX_DATA(VIO0_D4_MARK, PORT30_FN1),
+ PINMUX_DATA(VIO0_D3_MARK, PORT31_FN1),
+ PINMUX_DATA(VIO0_D2_MARK, PORT32_FN1),
+ PINMUX_DATA(VIO0_D1_MARK, PORT33_FN1),
+ PINMUX_DATA(VIO0_D0_MARK, PORT34_FN1),
+ PINMUX_DATA(VIO0_CLK_MARK, PORT35_FN1),
+ PINMUX_DATA(VIO_CKO_MARK, PORT36_FN1),
+ PINMUX_DATA(VIO0_HD_MARK, PORT37_FN1),
+ PINMUX_DATA(VIO0_FIELD_MARK, PORT38_FN1),
+ PINMUX_DATA(VIO0_VD_MARK, PORT39_FN1),
+
+ /* Port38 IRQ */
+ PINMUX_DATA(IRQ25_MARK, PORT38_FN0),
+
+ /* Port40 */
+ PINMUX_DATA(LCD0_D18_PORT40_MARK, PORT40_FN4, MSEL5CR_6_0),
+ PINMUX_DATA(RSPI_CK_A_MARK, PORT40_FN6),
+ PINMUX_DATA(LCD1_LCLK_MARK, PORT40_FN7),
+
+ /* Port41 */
+ PINMUX_DATA(LCD0_D17_MARK, PORT41_FN1),
+ PINMUX_DATA(MSIOF2_SS1_MARK, PORT41_FN2),
+ PINMUX_DATA(IRQ31_PORT41_MARK, PORT41_FN0, MSEL1CR_31_1),
+
+ /* Port42 */
+ PINMUX_DATA(LCD0_D16_MARK, PORT42_FN1),
+ PINMUX_DATA(MSIOF2_MCK1_MARK, PORT42_FN2),
+ PINMUX_DATA(IRQ12_PORT42_MARK, PORT42_FN0, MSEL1CR_12_1),
+
+ /* Port43 */
+ PINMUX_DATA(LCD0_D15_MARK, PORT43_FN1),
+ PINMUX_DATA(MSIOF2_MCK0_MARK, PORT43_FN2),
+ PINMUX_DATA(KEYIN0_PORT43_MARK, PORT43_FN3, MSEL4CR_18_0),
+ PINMUX_DATA(DV_D15_MARK, PORT43_FN6),
+
+ /* Port44 */
+ PINMUX_DATA(LCD0_D14_MARK, PORT44_FN1),
+ PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT44_FN2),
+ PINMUX_DATA(KEYIN1_PORT44_MARK, PORT44_FN3, MSEL4CR_18_0),
+ PINMUX_DATA(DV_D14_MARK, PORT44_FN6),
+
+ /* Port45 */
+ PINMUX_DATA(LCD0_D13_MARK, PORT45_FN1),
+ PINMUX_DATA(MSIOF2_RSCK_MARK, PORT45_FN2),
+ PINMUX_DATA(KEYIN2_PORT45_MARK, PORT45_FN3, MSEL4CR_18_0),
+ PINMUX_DATA(DV_D13_MARK, PORT45_FN6),
+
+ /* Port46 */
+ PINMUX_DATA(LCD0_D12_MARK, PORT46_FN1),
+ PINMUX_DATA(KEYIN3_PORT46_MARK, PORT46_FN3, MSEL4CR_18_0),
+ PINMUX_DATA(DV_D12_MARK, PORT46_FN6),
+
+ /* Port47 */
+ PINMUX_DATA(LCD0_D11_MARK, PORT47_FN1),
+ PINMUX_DATA(KEYIN4_MARK, PORT47_FN3),
+ PINMUX_DATA(DV_D11_MARK, PORT47_FN6),
+
+ /* Port48 */
+ PINMUX_DATA(LCD0_D10_MARK, PORT48_FN1),
+ PINMUX_DATA(KEYIN5_MARK, PORT48_FN3),
+ PINMUX_DATA(DV_D10_MARK, PORT48_FN6),
+
+ /* Port49 */
+ PINMUX_DATA(LCD0_D9_MARK, PORT49_FN1),
+ PINMUX_DATA(KEYIN6_MARK, PORT49_FN3),
+ PINMUX_DATA(DV_D9_MARK, PORT49_FN6),
+ PINMUX_DATA(IRQ30_PORT49_MARK, PORT49_FN0, MSEL1CR_30_1),
+
+ /* Port50 */
+ PINMUX_DATA(LCD0_D8_MARK, PORT50_FN1),
+ PINMUX_DATA(KEYIN7_MARK, PORT50_FN3),
+ PINMUX_DATA(DV_D8_MARK, PORT50_FN6),
+ PINMUX_DATA(IRQ29_PORT50_MARK, PORT50_FN0, MSEL1CR_29_1),
+
+ /* Port51 */
+ PINMUX_DATA(LCD0_D7_MARK, PORT51_FN1),
+ PINMUX_DATA(KEYOUT0_MARK, PORT51_FN3),
+ PINMUX_DATA(DV_D7_MARK, PORT51_FN6),
+
+ /* Port52 */
+ PINMUX_DATA(LCD0_D6_MARK, PORT52_FN1),
+ PINMUX_DATA(KEYOUT1_MARK, PORT52_FN3),
+ PINMUX_DATA(DV_D6_MARK, PORT52_FN6),
+
+ /* Port53 */
+ PINMUX_DATA(LCD0_D5_MARK, PORT53_FN1),
+ PINMUX_DATA(KEYOUT2_MARK, PORT53_FN3),
+ PINMUX_DATA(DV_D5_MARK, PORT53_FN6),
+
+ /* Port54 */
+ PINMUX_DATA(LCD0_D4_MARK, PORT54_FN1),
+ PINMUX_DATA(KEYOUT3_MARK, PORT54_FN3),
+ PINMUX_DATA(DV_D4_MARK, PORT54_FN6),
+
+ /* Port55 */
+ PINMUX_DATA(LCD0_D3_MARK, PORT55_FN1),
+ PINMUX_DATA(KEYOUT4_MARK, PORT55_FN3),
+ PINMUX_DATA(KEYIN3_PORT55_MARK, PORT55_FN4, MSEL4CR_18_1),
+ PINMUX_DATA(DV_D3_MARK, PORT55_FN6),
+
+ /* Port56 */
+ PINMUX_DATA(LCD0_D2_MARK, PORT56_FN1),
+ PINMUX_DATA(KEYOUT5_MARK, PORT56_FN3),
+ PINMUX_DATA(KEYIN2_PORT56_MARK, PORT56_FN4, MSEL4CR_18_1),
+ PINMUX_DATA(DV_D2_MARK, PORT56_FN6),
+ PINMUX_DATA(IRQ28_PORT56_MARK, PORT56_FN0, MSEL1CR_28_1),
+
+ /* Port57 */
+ PINMUX_DATA(LCD0_D1_MARK, PORT57_FN1),
+ PINMUX_DATA(KEYOUT6_MARK, PORT57_FN3),
+ PINMUX_DATA(KEYIN1_PORT57_MARK, PORT57_FN4, MSEL4CR_18_1),
+ PINMUX_DATA(DV_D1_MARK, PORT57_FN6),
+ PINMUX_DATA(IRQ27_PORT57_MARK, PORT57_FN0, MSEL1CR_27_1),
+
+ /* Port58 */
+ PINMUX_DATA(LCD0_D0_MARK, PORT58_FN1),
+ PINMUX_DATA(KEYOUT7_MARK, PORT58_FN3),
+ PINMUX_DATA(KEYIN0_PORT58_MARK, PORT58_FN4, MSEL4CR_18_1),
+ PINMUX_DATA(DV_D0_MARK, PORT58_FN6),
+ PINMUX_DATA(IRQ26_PORT58_MARK, PORT58_FN0, MSEL1CR_26_1),
+
+ /* Port59 */
+ PINMUX_DATA(LCD0_VCPWC_MARK, PORT59_FN1),
+ PINMUX_DATA(BBIF2_TSCK2_PORT59_MARK, PORT59_FN2, MSEL5CR_0_0),
+ PINMUX_DATA(RSPI_MOSI_A_MARK, PORT59_FN6),
+
+ /* Port60 */
+ PINMUX_DATA(LCD0_VEPWC_MARK, PORT60_FN1),
+ PINMUX_DATA(BBIF2_RXD2_PORT60_MARK, PORT60_FN2, MSEL5CR_0_0),
+ PINMUX_DATA(RSPI_MISO_A_MARK, PORT60_FN6),
+
+ /* Port61 */
+ PINMUX_DATA(LCD0_DON_MARK, PORT61_FN1),
+ PINMUX_DATA(MSIOF2_TXD_MARK, PORT61_FN2),
+
+ /* Port62 */
+ PINMUX_DATA(LCD0_DCK_MARK, PORT62_FN1),
+ PINMUX_DATA(LCD0_WR_MARK, PORT62_FN4),
+ PINMUX_DATA(DV_CLK_MARK, PORT62_FN6),
+ PINMUX_DATA(IRQ15_PORT62_MARK, PORT62_FN0, MSEL1CR_15_1),
+
+ /* Port63 */
+ PINMUX_DATA(LCD0_VSYN_MARK, PORT63_FN1),
+ PINMUX_DATA(DV_VSYNC_MARK, PORT63_FN6),
+ PINMUX_DATA(IRQ14_PORT63_MARK, PORT63_FN0, MSEL1CR_14_1),
+
+ /* Port64 */
+ PINMUX_DATA(LCD0_HSYN_MARK, PORT64_FN1),
+ PINMUX_DATA(LCD0_CS_MARK, PORT64_FN4),
+ PINMUX_DATA(DV_HSYNC_MARK, PORT64_FN6),
+ PINMUX_DATA(IRQ13_PORT64_MARK, PORT64_FN0, MSEL1CR_13_1),
+
+ /* Port65 */
+ PINMUX_DATA(LCD0_DISP_MARK, PORT65_FN1),
+ PINMUX_DATA(MSIOF2_TSCK_MARK, PORT65_FN2),
+ PINMUX_DATA(LCD0_RS_MARK, PORT65_FN4),
+
+ /* Port66 */
+ PINMUX_DATA(MEMC_INT_MARK, PORT66_FN1),
+ PINMUX_DATA(TPU0TO2_PORT66_MARK, PORT66_FN3, MSEL5CR_25_0),
+ PINMUX_DATA(MMC0_CLK_PORT66_MARK, PORT66_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(SDHI1_CLK_MARK, PORT66_FN6),
+
+ /* Port67 - Port73 Function1 */
+ PINMUX_DATA(MEMC_CS0_MARK, PORT67_FN1),
+ PINMUX_DATA(MEMC_AD8_MARK, PORT68_FN1),
+ PINMUX_DATA(MEMC_AD9_MARK, PORT69_FN1),
+ PINMUX_DATA(MEMC_AD10_MARK, PORT70_FN1),
+ PINMUX_DATA(MEMC_AD11_MARK, PORT71_FN1),
+ PINMUX_DATA(MEMC_AD12_MARK, PORT72_FN1),
+ PINMUX_DATA(MEMC_AD13_MARK, PORT73_FN1),
+
+ /* Port67 - Port73 Function2 */
+ PINMUX_DATA(MSIOF1_SS1_PORT67_MARK, PORT67_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(MSIOF1_RSCK_MARK, PORT68_FN2),
+ PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT69_FN2),
+ PINMUX_DATA(MSIOF1_MCK0_MARK, PORT70_FN2),
+ PINMUX_DATA(MSIOF1_MCK1_MARK, PORT71_FN2),
+ PINMUX_DATA(MSIOF1_TSCK_PORT72_MARK, PORT72_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(MSIOF1_TSYNC_PORT73_MARK, PORT73_FN2, MSEL4CR_10_1),
+
+ /* Port67 - Port73 Function4 */
+ PINMUX_DATA(MMC0_CMD_PORT67_MARK, PORT67_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMC0_D0_PORT68_MARK, PORT68_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMC0_D1_PORT69_MARK, PORT69_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMC0_D2_PORT70_MARK, PORT70_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMC0_D3_PORT71_MARK, PORT71_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMC0_D4_PORT72_MARK, PORT72_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMC0_D5_PORT73_MARK, PORT73_FN4, MSEL4CR_15_0),
+
+ /* Port67 - Port73 Function6 */
+ PINMUX_DATA(SDHI1_CMD_MARK, PORT67_FN6),
+ PINMUX_DATA(SDHI1_D0_MARK, PORT68_FN6),
+ PINMUX_DATA(SDHI1_D1_MARK, PORT69_FN6),
+ PINMUX_DATA(SDHI1_D2_MARK, PORT70_FN6),
+ PINMUX_DATA(SDHI1_D3_MARK, PORT71_FN6),
+ PINMUX_DATA(SDHI1_CD_MARK, PORT72_FN6),
+ PINMUX_DATA(SDHI1_WP_MARK, PORT73_FN6),
+
+ /* Port67 - Port71 IRQ */
+ PINMUX_DATA(IRQ20_MARK, PORT67_FN0),
+ PINMUX_DATA(IRQ16_PORT68_MARK, PORT68_FN0, MSEL1CR_16_0),
+ PINMUX_DATA(IRQ17_MARK, PORT69_FN0),
+ PINMUX_DATA(IRQ18_MARK, PORT70_FN0),
+ PINMUX_DATA(IRQ19_MARK, PORT71_FN0),
+
+ /* Port74 */
+ PINMUX_DATA(MEMC_AD14_MARK, PORT74_FN1),
+ PINMUX_DATA(MSIOF1_TXD_PORT74_MARK, PORT74_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(MMC0_D6_PORT74_MARK, PORT74_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(STP1_IPD7_MARK, PORT74_FN6),
+ PINMUX_DATA(LCD1_D21_MARK, PORT74_FN7),
+
+ /* Port75 */
+ PINMUX_DATA(MEMC_AD15_MARK, PORT75_FN1),
+ PINMUX_DATA(MSIOF1_RXD_PORT75_MARK, PORT75_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(MMC0_D7_PORT75_MARK, PORT75_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(STP1_IPD6_MARK, PORT75_FN6),
+ PINMUX_DATA(LCD1_D20_MARK, PORT75_FN7),
+
+ /* Port76 - Port80 Function */
+ PINMUX_DATA(SDHI0_CMD_MARK, PORT76_FN1),
+ PINMUX_DATA(SDHI0_D0_MARK, PORT77_FN1),
+ PINMUX_DATA(SDHI0_D1_MARK, PORT78_FN1),
+ PINMUX_DATA(SDHI0_D2_MARK, PORT79_FN1),
+ PINMUX_DATA(SDHI0_D3_MARK, PORT80_FN1),
+
+ /* Port81 */
+ PINMUX_DATA(SDHI0_CD_MARK, PORT81_FN1),
+ PINMUX_DATA(IRQ26_PORT81_MARK, PORT81_FN0, MSEL1CR_26_0),
+
+ /* Port82 - Port88 Function */
+ PINMUX_DATA(SDHI0_CLK_MARK, PORT82_FN1),
+ PINMUX_DATA(SDHI0_WP_MARK, PORT83_FN1),
+ PINMUX_DATA(RESETOUTS_MARK, PORT84_FN1),
+ PINMUX_DATA(USB0_PPON_MARK, PORT85_FN1),
+ PINMUX_DATA(USB0_OCI_MARK, PORT86_FN1),
+ PINMUX_DATA(USB1_PPON_MARK, PORT87_FN1),
+ PINMUX_DATA(USB1_OCI_MARK, PORT88_FN1),
+
+ /* Port89 */
+ PINMUX_DATA(DREQ0_MARK, PORT89_FN1),
+ PINMUX_DATA(BBIF2_TSCK2_PORT89_MARK, PORT89_FN2, MSEL5CR_0_1),
+ PINMUX_DATA(RSPI_SSL3_A_MARK, PORT89_FN6),
+
+ /* Port90 */
+ PINMUX_DATA(DACK0_MARK, PORT90_FN1),
+ PINMUX_DATA(BBIF2_RXD2_PORT90_MARK, PORT90_FN2, MSEL5CR_0_1),
+ PINMUX_DATA(RSPI_SSL2_A_MARK, PORT90_FN6),
+ PINMUX_DATA(WAIT_PORT90_MARK, PORT90_FN7, MSEL5CR_2_1),
+
+ /* Port91 */
+ PINMUX_DATA(MEMC_AD0_MARK, PORT91_FN1),
+ PINMUX_DATA(BBIF1_RXD_MARK, PORT91_FN2),
+ PINMUX_DATA(SCIFA5_TXD_PORT91_MARK, PORT91_FN3, MSEL5CR_15_1, MSEL5CR_14_0),
+ PINMUX_DATA(LCD1_D5_MARK, PORT91_FN7),
+
+ /* Port92 */
+ PINMUX_DATA(MEMC_AD1_MARK, PORT92_FN1),
+ PINMUX_DATA(BBIF1_TSYNC_MARK, PORT92_FN2),
+ PINMUX_DATA(SCIFA5_RXD_PORT92_MARK, PORT92_FN3, MSEL5CR_15_1, MSEL5CR_14_0),
+ PINMUX_DATA(STP0_IPD1_MARK, PORT92_FN6),
+ PINMUX_DATA(LCD1_D6_MARK, PORT92_FN7),
+
+ /* Port93 */
+ PINMUX_DATA(MEMC_AD2_MARK, PORT93_FN1),
+ PINMUX_DATA(BBIF1_TSCK_MARK, PORT93_FN2),
+ PINMUX_DATA(SCIFA4_TXD_PORT93_MARK, PORT93_FN3, MSEL5CR_12_1, MSEL5CR_11_0),
+ PINMUX_DATA(STP0_IPD3_MARK, PORT93_FN6),
+ PINMUX_DATA(LCD1_D8_MARK, PORT93_FN7),
+
+ /* Port94 */
+ PINMUX_DATA(MEMC_AD3_MARK, PORT94_FN1),
+ PINMUX_DATA(BBIF1_TXD_MARK, PORT94_FN2),
+ PINMUX_DATA(SCIFA4_RXD_PORT94_MARK, PORT94_FN3, MSEL5CR_12_1, MSEL5CR_11_0),
+ PINMUX_DATA(STP0_IPD4_MARK, PORT94_FN6),
+ PINMUX_DATA(LCD1_D9_MARK, PORT94_FN7),
+
+ /* Port95 */
+ PINMUX_DATA(MEMC_CS1_MARK, PORT95_FN1, MSEL4CR_6_0),
+ PINMUX_DATA(MEMC_A1_MARK, PORT95_FN1, MSEL4CR_6_1),
+
+ PINMUX_DATA(SCIFA2_CTS_MARK, PORT95_FN2),
+ PINMUX_DATA(SIM_RST_MARK, PORT95_FN4),
+ PINMUX_DATA(VIO0_D14_PORT95_MARK, PORT95_FN7, MSEL5CR_27_1),
+ PINMUX_DATA(IRQ22_MARK, PORT95_FN0),
+
+ /* Port96 */
+ PINMUX_DATA(MEMC_ADV_MARK, PORT96_FN1, MSEL4CR_6_0),
+ PINMUX_DATA(MEMC_DREQ0_MARK, PORT96_FN1, MSEL4CR_6_1),
+
+ PINMUX_DATA(SCIFA2_RTS_MARK, PORT96_FN2),
+ PINMUX_DATA(SIM_CLK_MARK, PORT96_FN4),
+ PINMUX_DATA(VIO0_D15_PORT96_MARK, PORT96_FN7, MSEL5CR_27_1),
+ PINMUX_DATA(IRQ23_MARK, PORT96_FN0),
+
+ /* Port97 */
+ PINMUX_DATA(MEMC_AD4_MARK, PORT97_FN1),
+ PINMUX_DATA(BBIF1_RSCK_MARK, PORT97_FN2),
+ PINMUX_DATA(LCD1_CS_MARK, PORT97_FN6),
+ PINMUX_DATA(LCD1_HSYN_MARK, PORT97_FN7),
+ PINMUX_DATA(IRQ12_PORT97_MARK, PORT97_FN0, MSEL1CR_12_0),
+
+ /* Port98 */
+ PINMUX_DATA(MEMC_AD5_MARK, PORT98_FN1),
+ PINMUX_DATA(BBIF1_RSYNC_MARK, PORT98_FN2),
+ PINMUX_DATA(LCD1_VSYN_MARK, PORT98_FN7),
+ PINMUX_DATA(IRQ13_PORT98_MARK, PORT98_FN0, MSEL1CR_13_0),
+
+ /* Port99 */
+ PINMUX_DATA(MEMC_AD6_MARK, PORT99_FN1),
+ PINMUX_DATA(BBIF1_FLOW_MARK, PORT99_FN2),
+ PINMUX_DATA(LCD1_WR_MARK, PORT99_FN6),
+ PINMUX_DATA(LCD1_DCK_MARK, PORT99_FN7),
+ PINMUX_DATA(IRQ14_PORT99_MARK, PORT99_FN0, MSEL1CR_14_0),
+
+ /* Port100 */
+ PINMUX_DATA(MEMC_AD7_MARK, PORT100_FN1),
+ PINMUX_DATA(BBIF1_RX_FLOW_N_MARK, PORT100_FN2),
+ PINMUX_DATA(LCD1_DON_MARK, PORT100_FN7),
+ PINMUX_DATA(IRQ15_PORT100_MARK, PORT100_FN0, MSEL1CR_15_0),
+
+ /* Port101 */
+ PINMUX_DATA(FCE0_MARK, PORT101_FN1),
+
+ /* Port102 */
+ PINMUX_DATA(FRB_MARK, PORT102_FN1),
+ PINMUX_DATA(LCD0_LCLK_PORT102_MARK, PORT102_FN4, MSEL5CR_6_0),
+
+ /* Port103 */
+ PINMUX_DATA(CS5B_MARK, PORT103_FN1),
+ PINMUX_DATA(FCE1_MARK, PORT103_FN2),
+ PINMUX_DATA(MMC1_CLK_PORT103_MARK, PORT103_FN3, MSEL4CR_15_1),
+
+ /* Port104 */
+ PINMUX_DATA(CS6A_MARK, PORT104_FN1),
+ PINMUX_DATA(MMC1_CMD_PORT104_MARK, PORT104_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(IRQ11_MARK, PORT104_FN0),
+
+ /* Port105 */
+ PINMUX_DATA(CS5A_PORT105_MARK, PORT105_FN1, MSEL5CR_2_0),
+ PINMUX_DATA(SCIFA3_RTS_PORT105_MARK, PORT105_FN4, MSEL5CR_8_0),
+
+ /* Port106 */
+ PINMUX_DATA(IOIS16_MARK, PORT106_FN1),
+ PINMUX_DATA(IDE_EXBUF_ENB_MARK, PORT106_FN6),
+
+ /* Port107 - Port115 Function */
+ PINMUX_DATA(WE3_ICIOWR_MARK, PORT107_FN1),
+ PINMUX_DATA(WE2_ICIORD_MARK, PORT108_FN1),
+ PINMUX_DATA(CS0_MARK, PORT109_FN1),
+ PINMUX_DATA(CS2_MARK, PORT110_FN1),
+ PINMUX_DATA(CS4_MARK, PORT111_FN1),
+ PINMUX_DATA(WE1_MARK, PORT112_FN1),
+ PINMUX_DATA(WE0_FWE_MARK, PORT113_FN1),
+ PINMUX_DATA(RDWR_MARK, PORT114_FN1),
+ PINMUX_DATA(RD_FSC_MARK, PORT115_FN1),
+
+ /* Port116 */
+ PINMUX_DATA(A25_MARK, PORT116_FN1),
+ PINMUX_DATA(MSIOF0_SS2_MARK, PORT116_FN2),
+ PINMUX_DATA(MSIOF1_SS2_PORT116_MARK, PORT116_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(SCIFA3_SCK_PORT116_MARK, PORT116_FN4, MSEL5CR_8_0),
+ PINMUX_DATA(GPO1_MARK, PORT116_FN5),
+
+ /* Port117 */
+ PINMUX_DATA(A24_MARK, PORT117_FN1),
+ PINMUX_DATA(MSIOF0_SS1_MARK, PORT117_FN2),
+ PINMUX_DATA(MSIOF1_SS1_PORT117_MARK, PORT117_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(SCIFA3_CTS_PORT117_MARK, PORT117_FN4, MSEL5CR_8_0),
+ PINMUX_DATA(GPO0_MARK, PORT117_FN5),
+
+ /* Port118 */
+ PINMUX_DATA(A23_MARK, PORT118_FN1),
+ PINMUX_DATA(MSIOF0_MCK1_MARK, PORT118_FN2),
+ PINMUX_DATA(MSIOF1_RXD_PORT118_MARK, PORT118_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(GPI1_MARK, PORT118_FN5),
+ PINMUX_DATA(IRQ9_PORT118_MARK, PORT118_FN0, MSEL1CR_9_0),
+
+ /* Port119 */
+ PINMUX_DATA(A22_MARK, PORT119_FN1),
+ PINMUX_DATA(MSIOF0_MCK0_MARK, PORT119_FN2),
+ PINMUX_DATA(MSIOF1_TXD_PORT119_MARK, PORT119_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(GPI0_MARK, PORT119_FN5),
+ PINMUX_DATA(IRQ8_MARK, PORT119_FN0),
+
+ /* Port120 */
+ PINMUX_DATA(A21_MARK, PORT120_FN1),
+ PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT120_FN2),
+ PINMUX_DATA(MSIOF1_TSYNC_PORT120_MARK, PORT120_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(IRQ7_PORT120_MARK, PORT120_FN0, MSEL1CR_7_0),
+
+ /* Port121 */
+ PINMUX_DATA(A20_MARK, PORT121_FN1),
+ PINMUX_DATA(MSIOF0_RSCK_MARK, PORT121_FN2),
+ PINMUX_DATA(MSIOF1_TSCK_PORT121_MARK, PORT121_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(IRQ6_PORT121_MARK, PORT121_FN0, MSEL1CR_6_0),
+
+ /* Port122 */
+ PINMUX_DATA(A19_MARK, PORT122_FN1),
+ PINMUX_DATA(MSIOF0_RXD_MARK, PORT122_FN2),
+
+ /* Port123 */
+ PINMUX_DATA(A18_MARK, PORT123_FN1),
+ PINMUX_DATA(MSIOF0_TSCK_MARK, PORT123_FN2),
+
+ /* Port124 */
+ PINMUX_DATA(A17_MARK, PORT124_FN1),
+ PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT124_FN2),
+
+ /* Port125 - Port141 Function */
+ PINMUX_DATA(A16_MARK, PORT125_FN1),
+ PINMUX_DATA(A15_MARK, PORT126_FN1),
+ PINMUX_DATA(A14_MARK, PORT127_FN1),
+ PINMUX_DATA(A13_MARK, PORT128_FN1),
+ PINMUX_DATA(A12_MARK, PORT129_FN1),
+ PINMUX_DATA(A11_MARK, PORT130_FN1),
+ PINMUX_DATA(A10_MARK, PORT131_FN1),
+ PINMUX_DATA(A9_MARK, PORT132_FN1),
+ PINMUX_DATA(A8_MARK, PORT133_FN1),
+ PINMUX_DATA(A7_MARK, PORT134_FN1),
+ PINMUX_DATA(A6_MARK, PORT135_FN1),
+ PINMUX_DATA(A5_FCDE_MARK, PORT136_FN1),
+ PINMUX_DATA(A4_FOE_MARK, PORT137_FN1),
+ PINMUX_DATA(A3_MARK, PORT138_FN1),
+ PINMUX_DATA(A2_MARK, PORT139_FN1),
+ PINMUX_DATA(A1_MARK, PORT140_FN1),
+ PINMUX_DATA(CKO_MARK, PORT141_FN1),
+
+ /* Port142 - Port157 Function1 */
+ PINMUX_DATA(D15_NAF15_MARK, PORT142_FN1),
+ PINMUX_DATA(D14_NAF14_MARK, PORT143_FN1),
+ PINMUX_DATA(D13_NAF13_MARK, PORT144_FN1),
+ PINMUX_DATA(D12_NAF12_MARK, PORT145_FN1),
+ PINMUX_DATA(D11_NAF11_MARK, PORT146_FN1),
+ PINMUX_DATA(D10_NAF10_MARK, PORT147_FN1),
+ PINMUX_DATA(D9_NAF9_MARK, PORT148_FN1),
+ PINMUX_DATA(D8_NAF8_MARK, PORT149_FN1),
+ PINMUX_DATA(D7_NAF7_MARK, PORT150_FN1),
+ PINMUX_DATA(D6_NAF6_MARK, PORT151_FN1),
+ PINMUX_DATA(D5_NAF5_MARK, PORT152_FN1),
+ PINMUX_DATA(D4_NAF4_MARK, PORT153_FN1),
+ PINMUX_DATA(D3_NAF3_MARK, PORT154_FN1),
+ PINMUX_DATA(D2_NAF2_MARK, PORT155_FN1),
+ PINMUX_DATA(D1_NAF1_MARK, PORT156_FN1),
+ PINMUX_DATA(D0_NAF0_MARK, PORT157_FN1),
+
+ /* Port142 - Port149 Function3 */
+ PINMUX_DATA(MMC1_D7_PORT142_MARK, PORT142_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMC1_D6_PORT143_MARK, PORT143_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMC1_D5_PORT144_MARK, PORT144_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMC1_D4_PORT145_MARK, PORT145_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMC1_D3_PORT146_MARK, PORT146_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMC1_D2_PORT147_MARK, PORT147_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMC1_D1_PORT148_MARK, PORT148_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMC1_D0_PORT149_MARK, PORT149_FN3, MSEL4CR_15_1),
+
+ /* Port158 */
+ PINMUX_DATA(D31_MARK, PORT158_FN1),
+ PINMUX_DATA(SCIFA3_SCK_PORT158_MARK, PORT158_FN2, MSEL5CR_8_1),
+ PINMUX_DATA(RMII_REF125CK_MARK, PORT158_FN3),
+ PINMUX_DATA(LCD0_D21_PORT158_MARK, PORT158_FN4, MSEL5CR_6_1),
+ PINMUX_DATA(IRDA_FIRSEL_MARK, PORT158_FN5),
+ PINMUX_DATA(IDE_D15_MARK, PORT158_FN6),
+
+ /* Port159 */
+ PINMUX_DATA(D30_MARK, PORT159_FN1),
+ PINMUX_DATA(SCIFA3_RXD_PORT159_MARK, PORT159_FN2, MSEL5CR_8_1),
+ PINMUX_DATA(RMII_REF50CK_MARK, PORT159_FN3),
+ PINMUX_DATA(LCD0_D23_PORT159_MARK, PORT159_FN4, MSEL5CR_6_1),
+ PINMUX_DATA(IDE_D14_MARK, PORT159_FN6),
+
+ /* Port160 */
+ PINMUX_DATA(D29_MARK, PORT160_FN1),
+ PINMUX_DATA(SCIFA3_TXD_PORT160_MARK, PORT160_FN2, MSEL5CR_8_1),
+ PINMUX_DATA(LCD0_D22_PORT160_MARK, PORT160_FN4, MSEL5CR_6_1),
+ PINMUX_DATA(VIO1_HD_MARK, PORT160_FN5),
+ PINMUX_DATA(IDE_D13_MARK, PORT160_FN6),
+
+ /* Port161 */
+ PINMUX_DATA(D28_MARK, PORT161_FN1),
+ PINMUX_DATA(SCIFA3_RTS_PORT161_MARK, PORT161_FN2, MSEL5CR_8_1),
+ PINMUX_DATA(ET_RX_DV_MARK, PORT161_FN3),
+ PINMUX_DATA(LCD0_D20_PORT161_MARK, PORT161_FN4, MSEL5CR_6_1),
+ PINMUX_DATA(IRDA_IN_MARK, PORT161_FN5),
+ PINMUX_DATA(IDE_D12_MARK, PORT161_FN6),
+
+ /* Port162 */
+ PINMUX_DATA(D27_MARK, PORT162_FN1),
+ PINMUX_DATA(SCIFA3_CTS_PORT162_MARK, PORT162_FN2, MSEL5CR_8_1),
+ PINMUX_DATA(LCD0_D19_PORT162_MARK, PORT162_FN4, MSEL5CR_6_1),
+ PINMUX_DATA(IRDA_OUT_MARK, PORT162_FN5),
+ PINMUX_DATA(IDE_D11_MARK, PORT162_FN6),
+
+ /* Port163 */
+ PINMUX_DATA(D26_MARK, PORT163_FN1),
+ PINMUX_DATA(MSIOF2_SS2_MARK, PORT163_FN2),
+ PINMUX_DATA(ET_COL_MARK, PORT163_FN3),
+ PINMUX_DATA(LCD0_D18_PORT163_MARK, PORT163_FN4, MSEL5CR_6_1),
+ PINMUX_DATA(IROUT_MARK, PORT163_FN5),
+ PINMUX_DATA(IDE_D10_MARK, PORT163_FN6),
+
+ /* Port164 */
+ PINMUX_DATA(D25_MARK, PORT164_FN1),
+ PINMUX_DATA(MSIOF2_TSYNC_MARK, PORT164_FN2),
+ PINMUX_DATA(ET_PHY_INT_MARK, PORT164_FN3),
+ PINMUX_DATA(LCD0_RD_MARK, PORT164_FN4),
+ PINMUX_DATA(IDE_D9_MARK, PORT164_FN6),
+
+ /* Port165 */
+ PINMUX_DATA(D24_MARK, PORT165_FN1),
+ PINMUX_DATA(MSIOF2_RXD_MARK, PORT165_FN2),
+ PINMUX_DATA(LCD0_LCLK_PORT165_MARK, PORT165_FN4, MSEL5CR_6_1),
+ PINMUX_DATA(IDE_D8_MARK, PORT165_FN6),
+
+ /* Port166 - Port171 Function1 */
+ PINMUX_DATA(D21_MARK, PORT166_FN1),
+ PINMUX_DATA(D20_MARK, PORT167_FN1),
+ PINMUX_DATA(D19_MARK, PORT168_FN1),
+ PINMUX_DATA(D18_MARK, PORT169_FN1),
+ PINMUX_DATA(D17_MARK, PORT170_FN1),
+ PINMUX_DATA(D16_MARK, PORT171_FN1),
+
+ /* Port166 - Port171 Function3 */
+ PINMUX_DATA(ET_ETXD5_MARK, PORT166_FN3),
+ PINMUX_DATA(ET_ETXD4_MARK, PORT167_FN3),
+ PINMUX_DATA(ET_ETXD3_MARK, PORT168_FN3),
+ PINMUX_DATA(ET_ETXD2_MARK, PORT169_FN3),
+ PINMUX_DATA(ET_ETXD1_MARK, PORT170_FN3),
+ PINMUX_DATA(ET_ETXD0_MARK, PORT171_FN3),
+
+ /* Port166 - Port171 Function6 */
+ PINMUX_DATA(IDE_D5_MARK, PORT166_FN6),
+ PINMUX_DATA(IDE_D4_MARK, PORT167_FN6),
+ PINMUX_DATA(IDE_D3_MARK, PORT168_FN6),
+ PINMUX_DATA(IDE_D2_MARK, PORT169_FN6),
+ PINMUX_DATA(IDE_D1_MARK, PORT170_FN6),
+ PINMUX_DATA(IDE_D0_MARK, PORT171_FN6),
+
+ /* Port167 - Port171 IRQ */
+ PINMUX_DATA(IRQ31_PORT167_MARK, PORT167_FN0, MSEL1CR_31_0),
+ PINMUX_DATA(IRQ27_PORT168_MARK, PORT168_FN0, MSEL1CR_27_0),
+ PINMUX_DATA(IRQ28_PORT169_MARK, PORT169_FN0, MSEL1CR_28_0),
+ PINMUX_DATA(IRQ29_PORT170_MARK, PORT170_FN0, MSEL1CR_29_0),
+ PINMUX_DATA(IRQ30_PORT171_MARK, PORT171_FN0, MSEL1CR_30_0),
+
+ /* Port172 */
+ PINMUX_DATA(D23_MARK, PORT172_FN1),
+ PINMUX_DATA(SCIFB_RTS_PORT172_MARK, PORT172_FN2, MSEL5CR_17_1),
+ PINMUX_DATA(ET_ETXD7_MARK, PORT172_FN3),
+ PINMUX_DATA(IDE_D7_MARK, PORT172_FN6),
+ PINMUX_DATA(IRQ4_PORT172_MARK, PORT172_FN0, MSEL1CR_4_1),
+
+ /* Port173 */
+ PINMUX_DATA(D22_MARK, PORT173_FN1),
+ PINMUX_DATA(SCIFB_CTS_PORT173_MARK, PORT173_FN2, MSEL5CR_17_1),
+ PINMUX_DATA(ET_ETXD6_MARK, PORT173_FN3),
+ PINMUX_DATA(IDE_D6_MARK, PORT173_FN6),
+ PINMUX_DATA(IRQ6_PORT173_MARK, PORT173_FN0, MSEL1CR_6_1),
+
+ /* Port174 */
+ PINMUX_DATA(A26_MARK, PORT174_FN1),
+ PINMUX_DATA(MSIOF0_TXD_MARK, PORT174_FN2),
+ PINMUX_DATA(ET_RX_CLK_MARK, PORT174_FN3),
+ PINMUX_DATA(SCIFA3_RXD_PORT174_MARK, PORT174_FN4, MSEL5CR_8_0),
+
+ /* Port175 */
+ PINMUX_DATA(A0_MARK, PORT175_FN1),
+ PINMUX_DATA(BS_MARK, PORT175_FN2),
+ PINMUX_DATA(ET_WOL_MARK, PORT175_FN3),
+ PINMUX_DATA(SCIFA3_TXD_PORT175_MARK, PORT175_FN4, MSEL5CR_8_0),
+
+ /* Port176 */
+ PINMUX_DATA(ET_GTX_CLK_MARK, PORT176_FN3),
+
+ /* Port177 */
+ PINMUX_DATA(WAIT_PORT177_MARK, PORT177_FN1, MSEL5CR_2_0),
+ PINMUX_DATA(ET_LINK_MARK, PORT177_FN3),
+ PINMUX_DATA(IDE_IOWR_MARK, PORT177_FN6),
+ PINMUX_DATA(SDHI2_WP_PORT177_MARK, PORT177_FN7, MSEL5CR_19_1),
+
+ /* Port178 */
+ PINMUX_DATA(VIO0_D12_MARK, PORT178_FN1),
+ PINMUX_DATA(VIO1_D4_MARK, PORT178_FN5),
+ PINMUX_DATA(IDE_IORD_MARK, PORT178_FN6),
+
+ /* Port179 */
+ PINMUX_DATA(VIO0_D11_MARK, PORT179_FN1),
+ PINMUX_DATA(VIO1_D3_MARK, PORT179_FN5),
+ PINMUX_DATA(IDE_IORDY_MARK, PORT179_FN6),
+
+ /* Port180 */
+ PINMUX_DATA(VIO0_D10_MARK, PORT180_FN1),
+ PINMUX_DATA(TPU0TO3_MARK, PORT180_FN4),
+ PINMUX_DATA(VIO1_D2_MARK, PORT180_FN5),
+ PINMUX_DATA(IDE_INT_MARK, PORT180_FN6),
+ PINMUX_DATA(IRQ24_MARK, PORT180_FN0),
+
+ /* Port181 */
+ PINMUX_DATA(VIO0_D9_MARK, PORT181_FN1),
+ PINMUX_DATA(VIO1_D1_MARK, PORT181_FN5),
+ PINMUX_DATA(IDE_RST_MARK, PORT181_FN6),
+
+ /* Port182 */
+ PINMUX_DATA(VIO0_D8_MARK, PORT182_FN1),
+ PINMUX_DATA(VIO1_D0_MARK, PORT182_FN5),
+ PINMUX_DATA(IDE_DIRECTION_MARK, PORT182_FN6),
+
+ /* Port183 */
+ PINMUX_DATA(DREQ1_MARK, PORT183_FN1),
+ PINMUX_DATA(BBIF2_TXD2_PORT183_MARK, PORT183_FN2, MSEL5CR_0_1),
+ PINMUX_DATA(ET_TX_EN_MARK, PORT183_FN3),
+
+ /* Port184 */
+ PINMUX_DATA(DACK1_MARK, PORT184_FN1),
+ PINMUX_DATA(BBIF2_TSYNC2_PORT184_MARK, PORT184_FN2, MSEL5CR_0_1),
+ PINMUX_DATA(ET_TX_CLK_MARK, PORT184_FN3),
+
+ /* Port185 - Port192 Function1 */
+ PINMUX_DATA(SCIFA1_SCK_MARK, PORT185_FN1),
+ PINMUX_DATA(SCIFB_RTS_PORT186_MARK, PORT186_FN1, MSEL5CR_17_0),
+ PINMUX_DATA(SCIFB_CTS_PORT187_MARK, PORT187_FN1, MSEL5CR_17_0),
+ PINMUX_DATA(SCIFA0_SCK_MARK, PORT188_FN1),
+ PINMUX_DATA(SCIFB_SCK_PORT190_MARK, PORT190_FN1, MSEL5CR_17_0),
+ PINMUX_DATA(SCIFB_RXD_PORT191_MARK, PORT191_FN1, MSEL5CR_17_0),
+ PINMUX_DATA(SCIFB_TXD_PORT192_MARK, PORT192_FN1, MSEL5CR_17_0),
+
+ /* Port185 - Port192 Function3 */
+ PINMUX_DATA(ET_ERXD0_MARK, PORT185_FN3),
+ PINMUX_DATA(ET_ERXD1_MARK, PORT186_FN3),
+ PINMUX_DATA(ET_ERXD2_MARK, PORT187_FN3),
+ PINMUX_DATA(ET_ERXD3_MARK, PORT188_FN3),
+ PINMUX_DATA(ET_ERXD4_MARK, PORT189_FN3),
+ PINMUX_DATA(ET_ERXD5_MARK, PORT190_FN3),
+ PINMUX_DATA(ET_ERXD6_MARK, PORT191_FN3),
+ PINMUX_DATA(ET_ERXD7_MARK, PORT192_FN3),
+
+ /* Port185 - Port192 Function6 */
+ PINMUX_DATA(STP1_IPCLK_MARK, PORT185_FN6),
+ PINMUX_DATA(STP1_IPD0_PORT186_MARK, PORT186_FN6, MSEL5CR_23_0),
+ PINMUX_DATA(STP1_IPEN_PORT187_MARK, PORT187_FN6, MSEL5CR_23_0),
+ PINMUX_DATA(STP1_IPSYNC_MARK, PORT188_FN6),
+ PINMUX_DATA(STP0_IPCLK_MARK, PORT189_FN6),
+ PINMUX_DATA(STP0_IPD0_MARK, PORT190_FN6),
+ PINMUX_DATA(STP0_IPEN_MARK, PORT191_FN6),
+ PINMUX_DATA(STP0_IPSYNC_MARK, PORT192_FN6),
+
+ /* Port193 */
+ PINMUX_DATA(SCIFA0_CTS_MARK, PORT193_FN1),
+ PINMUX_DATA(RMII_CRS_DV_MARK, PORT193_FN3),
+ PINMUX_DATA(STP1_IPEN_PORT193_MARK, PORT193_FN6, MSEL5CR_23_1), /* ? */
+ PINMUX_DATA(LCD1_D17_MARK, PORT193_FN7),
+
+ /* Port194 */
+ PINMUX_DATA(SCIFA0_RTS_MARK, PORT194_FN1),
+ PINMUX_DATA(RMII_RX_ER_MARK, PORT194_FN3),
+ PINMUX_DATA(STP1_IPD0_PORT194_MARK, PORT194_FN6, MSEL5CR_23_1), /* ? */
+ PINMUX_DATA(LCD1_D16_MARK, PORT194_FN7),
+
+ /* Port195 */
+ PINMUX_DATA(SCIFA1_RXD_MARK, PORT195_FN1),
+ PINMUX_DATA(RMII_RXD0_MARK, PORT195_FN3),
+ PINMUX_DATA(STP1_IPD3_MARK, PORT195_FN6),
+ PINMUX_DATA(LCD1_D15_MARK, PORT195_FN7),
+
+ /* Port196 */
+ PINMUX_DATA(SCIFA1_TXD_MARK, PORT196_FN1),
+ PINMUX_DATA(RMII_RXD1_MARK, PORT196_FN3),
+ PINMUX_DATA(STP1_IPD2_MARK, PORT196_FN6),
+ PINMUX_DATA(LCD1_D14_MARK, PORT196_FN7),
+
+ /* Port197 */
+ PINMUX_DATA(SCIFA0_RXD_MARK, PORT197_FN1),
+ PINMUX_DATA(VIO1_CLK_MARK, PORT197_FN5),
+ PINMUX_DATA(STP1_IPD5_MARK, PORT197_FN6),
+ PINMUX_DATA(LCD1_D19_MARK, PORT197_FN7),
+
+ /* Port198 */
+ PINMUX_DATA(SCIFA0_TXD_MARK, PORT198_FN1),
+ PINMUX_DATA(VIO1_VD_MARK, PORT198_FN5),
+ PINMUX_DATA(STP1_IPD4_MARK, PORT198_FN6),
+ PINMUX_DATA(LCD1_D18_MARK, PORT198_FN7),
+
+ /* Port199 */
+ PINMUX_DATA(MEMC_NWE_MARK, PORT199_FN1),
+ PINMUX_DATA(SCIFA2_SCK_PORT199_MARK, PORT199_FN2, MSEL5CR_7_1),
+ PINMUX_DATA(RMII_TX_EN_MARK, PORT199_FN3),
+ PINMUX_DATA(SIM_D_PORT199_MARK, PORT199_FN4, MSEL5CR_21_1),
+ PINMUX_DATA(STP1_IPD1_MARK, PORT199_FN6),
+ PINMUX_DATA(LCD1_D13_MARK, PORT199_FN7),
+
+ /* Port200 */
+ PINMUX_DATA(MEMC_NOE_MARK, PORT200_FN1),
+ PINMUX_DATA(SCIFA2_RXD_MARK, PORT200_FN2),
+ PINMUX_DATA(RMII_TXD0_MARK, PORT200_FN3),
+ PINMUX_DATA(STP0_IPD7_MARK, PORT200_FN6),
+ PINMUX_DATA(LCD1_D12_MARK, PORT200_FN7),
+
+ /* Port201 */
+ PINMUX_DATA(MEMC_WAIT_MARK, PORT201_FN1, MSEL4CR_6_0),
+ PINMUX_DATA(MEMC_DREQ1_MARK, PORT201_FN1, MSEL4CR_6_1),
+
+ PINMUX_DATA(SCIFA2_TXD_MARK, PORT201_FN2),
+ PINMUX_DATA(RMII_TXD1_MARK, PORT201_FN3),
+ PINMUX_DATA(STP0_IPD6_MARK, PORT201_FN6),
+ PINMUX_DATA(LCD1_D11_MARK, PORT201_FN7),
+
+ /* Port202 */
+ PINMUX_DATA(MEMC_BUSCLK_MARK, PORT202_FN1, MSEL4CR_6_0),
+ PINMUX_DATA(MEMC_A0_MARK, PORT202_FN1, MSEL4CR_6_1),
+
+ PINMUX_DATA(MSIOF1_SS2_PORT202_MARK, PORT202_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(RMII_MDC_MARK, PORT202_FN3),
+ PINMUX_DATA(TPU0TO2_PORT202_MARK, PORT202_FN4, MSEL5CR_25_1),
+ PINMUX_DATA(IDE_CS0_MARK, PORT202_FN6),
+ PINMUX_DATA(SDHI2_CD_PORT202_MARK, PORT202_FN7, MSEL5CR_19_1),
+ PINMUX_DATA(IRQ21_MARK, PORT202_FN0),
+
+ /* Port203 - Port208 Function1 */
+ PINMUX_DATA(SDHI2_CLK_MARK, PORT203_FN1),
+ PINMUX_DATA(SDHI2_CMD_MARK, PORT204_FN1),
+ PINMUX_DATA(SDHI2_D0_MARK, PORT205_FN1),
+ PINMUX_DATA(SDHI2_D1_MARK, PORT206_FN1),
+ PINMUX_DATA(SDHI2_D2_MARK, PORT207_FN1),
+ PINMUX_DATA(SDHI2_D3_MARK, PORT208_FN1),
+
+ /* Port203 - Port208 Function3 */
+ PINMUX_DATA(ET_TX_ER_MARK, PORT203_FN3),
+ PINMUX_DATA(ET_RX_ER_MARK, PORT204_FN3),
+ PINMUX_DATA(ET_CRS_MARK, PORT205_FN3),
+ PINMUX_DATA(ET_MDC_MARK, PORT206_FN3),
+ PINMUX_DATA(ET_MDIO_MARK, PORT207_FN3),
+ PINMUX_DATA(RMII_MDIO_MARK, PORT208_FN3),
+
+ /* Port203 - Port208 Function6 */
+ PINMUX_DATA(IDE_A2_MARK, PORT203_FN6),
+ PINMUX_DATA(IDE_A1_MARK, PORT204_FN6),
+ PINMUX_DATA(IDE_A0_MARK, PORT205_FN6),
+ PINMUX_DATA(IDE_IODACK_MARK, PORT206_FN6),
+ PINMUX_DATA(IDE_IODREQ_MARK, PORT207_FN6),
+ PINMUX_DATA(IDE_CS1_MARK, PORT208_FN6),
+
+ /* Port203 - Port208 Function7 */
+ PINMUX_DATA(SCIFA4_TXD_PORT203_MARK, PORT203_FN7, MSEL5CR_12_0, MSEL5CR_11_1),
+ PINMUX_DATA(SCIFA4_RXD_PORT204_MARK, PORT204_FN7, MSEL5CR_12_0, MSEL5CR_11_1),
+ PINMUX_DATA(SCIFA4_SCK_PORT205_MARK, PORT205_FN7, MSEL5CR_10_1),
+ PINMUX_DATA(SCIFA5_SCK_PORT206_MARK, PORT206_FN7, MSEL5CR_13_1),
+ PINMUX_DATA(SCIFA5_RXD_PORT207_MARK, PORT207_FN7, MSEL5CR_15_0, MSEL5CR_14_1),
+ PINMUX_DATA(SCIFA5_TXD_PORT208_MARK, PORT208_FN7, MSEL5CR_15_0, MSEL5CR_14_1),
+
+ /* Port209 */
+ PINMUX_DATA(VBUS_MARK, PORT209_FN1),
+ PINMUX_DATA(IRQ7_PORT209_MARK, PORT209_FN0, MSEL1CR_7_1),
+
+ /* Port210 */
+ PINMUX_DATA(IRQ9_PORT210_MARK, PORT210_FN0, MSEL1CR_9_1),
+
+ /* Port211 */
+ PINMUX_DATA(IRQ16_PORT211_MARK, PORT211_FN0, MSEL1CR_16_1),
+
+ /* LCDC select */
+ PINMUX_DATA(LCDC0_SELECT_MARK, MSEL3CR_6_0),
+ PINMUX_DATA(LCDC1_SELECT_MARK, MSEL3CR_6_1),
+
+ /* SDENC */
+ PINMUX_DATA(SDENC_CPG_MARK, MSEL4CR_19_0),
+ PINMUX_DATA(SDENC_DV_CLKI_MARK, MSEL4CR_19_1),
+
+ /* SYSC */
+ PINMUX_DATA(RESETP_PULLUP_MARK, MSEL4CR_4_0),
+ PINMUX_DATA(RESETP_PLAIN_MARK, MSEL4CR_4_1),
+
+ /* DEBUG */
+ PINMUX_DATA(EDEBGREQ_PULLDOWN_MARK, MSEL4CR_1_0),
+ PINMUX_DATA(EDEBGREQ_PULLUP_MARK, MSEL4CR_1_1),
+
+ PINMUX_DATA(TRACEAUD_FROM_VIO_MARK, MSEL5CR_30_0, MSEL5CR_29_0),
+ PINMUX_DATA(TRACEAUD_FROM_LCDC0_MARK, MSEL5CR_30_0, MSEL5CR_29_1),
+ PINMUX_DATA(TRACEAUD_FROM_MEMC_MARK, MSEL5CR_30_1, MSEL5CR_29_0),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+
+ /* PORT */
+ GPIO_PORT_ALL(),
+
+ /* IRQ */
+ GPIO_FN(IRQ0_PORT2), GPIO_FN(IRQ0_PORT13),
+ GPIO_FN(IRQ1),
+ GPIO_FN(IRQ2_PORT11), GPIO_FN(IRQ2_PORT12),
+ GPIO_FN(IRQ3_PORT10), GPIO_FN(IRQ3_PORT14),
+ GPIO_FN(IRQ4_PORT15), GPIO_FN(IRQ4_PORT172),
+ GPIO_FN(IRQ5_PORT0), GPIO_FN(IRQ5_PORT1),
+ GPIO_FN(IRQ6_PORT121), GPIO_FN(IRQ6_PORT173),
+ GPIO_FN(IRQ7_PORT120), GPIO_FN(IRQ7_PORT209),
+ GPIO_FN(IRQ8),
+ GPIO_FN(IRQ9_PORT118), GPIO_FN(IRQ9_PORT210),
+ GPIO_FN(IRQ10),
+ GPIO_FN(IRQ11),
+ GPIO_FN(IRQ12_PORT42), GPIO_FN(IRQ12_PORT97),
+ GPIO_FN(IRQ13_PORT64), GPIO_FN(IRQ13_PORT98),
+ GPIO_FN(IRQ14_PORT63), GPIO_FN(IRQ14_PORT99),
+ GPIO_FN(IRQ15_PORT62), GPIO_FN(IRQ15_PORT100),
+ GPIO_FN(IRQ16_PORT68), GPIO_FN(IRQ16_PORT211),
+ GPIO_FN(IRQ17),
+ GPIO_FN(IRQ18),
+ GPIO_FN(IRQ19),
+ GPIO_FN(IRQ20),
+ GPIO_FN(IRQ21),
+ GPIO_FN(IRQ22),
+ GPIO_FN(IRQ23),
+ GPIO_FN(IRQ24),
+ GPIO_FN(IRQ25),
+ GPIO_FN(IRQ26_PORT58), GPIO_FN(IRQ26_PORT81),
+ GPIO_FN(IRQ27_PORT57), GPIO_FN(IRQ27_PORT168),
+ GPIO_FN(IRQ28_PORT56), GPIO_FN(IRQ28_PORT169),
+ GPIO_FN(IRQ29_PORT50), GPIO_FN(IRQ29_PORT170),
+ GPIO_FN(IRQ30_PORT49), GPIO_FN(IRQ30_PORT171),
+ GPIO_FN(IRQ31_PORT41), GPIO_FN(IRQ31_PORT167),
+
+ /* Function */
+
+ /* DBGT */
+ GPIO_FN(DBGMDT2), GPIO_FN(DBGMDT1), GPIO_FN(DBGMDT0),
+ GPIO_FN(DBGMD10), GPIO_FN(DBGMD11), GPIO_FN(DBGMD20),
+ GPIO_FN(DBGMD21),
+
+ /* FSI */
+ GPIO_FN(FSIAISLD_PORT0), /* FSIAISLD Port 0/5 */
+ GPIO_FN(FSIAISLD_PORT5),
+ GPIO_FN(FSIASPDIF_PORT9), /* FSIASPDIF Port 9/18 */
+ GPIO_FN(FSIASPDIF_PORT18),
+ GPIO_FN(FSIAOSLD1), GPIO_FN(FSIAOSLD2), GPIO_FN(FSIAOLR),
+ GPIO_FN(FSIAOBT), GPIO_FN(FSIAOSLD), GPIO_FN(FSIAOMC),
+ GPIO_FN(FSIACK), GPIO_FN(FSIAILR), GPIO_FN(FSIAIBT),
+
+ /* FMSI */
+ GPIO_FN(FMSISLD_PORT1), /* FMSISLD Port 1/6 */
+ GPIO_FN(FMSISLD_PORT6),
+ GPIO_FN(FMSIILR), GPIO_FN(FMSIIBT), GPIO_FN(FMSIOLR),
+ GPIO_FN(FMSIOBT), GPIO_FN(FMSICK), GPIO_FN(FMSOILR),
+ GPIO_FN(FMSOIBT), GPIO_FN(FMSOOLR), GPIO_FN(FMSOOBT),
+ GPIO_FN(FMSOSLD), GPIO_FN(FMSOCK),
+
+ /* SCIFA0 */
+ GPIO_FN(SCIFA0_SCK), GPIO_FN(SCIFA0_CTS), GPIO_FN(SCIFA0_RTS),
+ GPIO_FN(SCIFA0_RXD), GPIO_FN(SCIFA0_TXD),
+
+ /* SCIFA1 */
+ GPIO_FN(SCIFA1_CTS), GPIO_FN(SCIFA1_SCK),
+ GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_TXD), GPIO_FN(SCIFA1_RTS),
+
+ /* SCIFA2 */
+ GPIO_FN(SCIFA2_SCK_PORT22), /* SCIFA2_SCK Port 22/199 */
+ GPIO_FN(SCIFA2_SCK_PORT199),
+ GPIO_FN(SCIFA2_RXD), GPIO_FN(SCIFA2_TXD),
+ GPIO_FN(SCIFA2_CTS), GPIO_FN(SCIFA2_RTS),
+
+ /* SCIFA3 */
+ GPIO_FN(SCIFA3_RTS_PORT105), /* MSEL5CR_8_0 */
+ GPIO_FN(SCIFA3_SCK_PORT116),
+ GPIO_FN(SCIFA3_CTS_PORT117),
+ GPIO_FN(SCIFA3_RXD_PORT174),
+ GPIO_FN(SCIFA3_TXD_PORT175),
+
+ GPIO_FN(SCIFA3_RTS_PORT161), /* MSEL5CR_8_1 */
+ GPIO_FN(SCIFA3_SCK_PORT158),
+ GPIO_FN(SCIFA3_CTS_PORT162),
+ GPIO_FN(SCIFA3_RXD_PORT159),
+ GPIO_FN(SCIFA3_TXD_PORT160),
+
+ /* SCIFA4 */
+ GPIO_FN(SCIFA4_RXD_PORT12), /* MSEL5CR[12:11] = 00 */
+ GPIO_FN(SCIFA4_TXD_PORT13),
+
+ GPIO_FN(SCIFA4_RXD_PORT204), /* MSEL5CR[12:11] = 01 */
+ GPIO_FN(SCIFA4_TXD_PORT203),
+
+ GPIO_FN(SCIFA4_RXD_PORT94), /* MSEL5CR[12:11] = 10 */
+ GPIO_FN(SCIFA4_TXD_PORT93),
+
+ GPIO_FN(SCIFA4_SCK_PORT21), /* SCIFA4_SCK Port 21/205 */
+ GPIO_FN(SCIFA4_SCK_PORT205),
+
+ /* SCIFA5 */
+ GPIO_FN(SCIFA5_TXD_PORT20), /* MSEL5CR[15:14] = 00 */
+ GPIO_FN(SCIFA5_RXD_PORT10),
+
+ GPIO_FN(SCIFA5_RXD_PORT207), /* MSEL5CR[15:14] = 01 */
+ GPIO_FN(SCIFA5_TXD_PORT208),
+
+ GPIO_FN(SCIFA5_TXD_PORT91), /* MSEL5CR[15:14] = 10 */
+ GPIO_FN(SCIFA5_RXD_PORT92),
+
+ GPIO_FN(SCIFA5_SCK_PORT23), /* SCIFA5_SCK Port 23/206 */
+ GPIO_FN(SCIFA5_SCK_PORT206),
+
+ /* SCIFA6 */
+ GPIO_FN(SCIFA6_SCK), GPIO_FN(SCIFA6_RXD), GPIO_FN(SCIFA6_TXD),
+
+ /* SCIFA7 */
+ GPIO_FN(SCIFA7_TXD), GPIO_FN(SCIFA7_RXD),
+
+ /* SCIFAB */
+ GPIO_FN(SCIFB_SCK_PORT190), /* MSEL5CR_17_0 */
+ GPIO_FN(SCIFB_RXD_PORT191),
+ GPIO_FN(SCIFB_TXD_PORT192),
+ GPIO_FN(SCIFB_RTS_PORT186),
+ GPIO_FN(SCIFB_CTS_PORT187),
+
+ GPIO_FN(SCIFB_SCK_PORT2), /* MSEL5CR_17_1 */
+ GPIO_FN(SCIFB_RXD_PORT3),
+ GPIO_FN(SCIFB_TXD_PORT4),
+ GPIO_FN(SCIFB_RTS_PORT172),
+ GPIO_FN(SCIFB_CTS_PORT173),
+
+ /* LCD0 */
+ GPIO_FN(LCD0_D0), GPIO_FN(LCD0_D1), GPIO_FN(LCD0_D2),
+ GPIO_FN(LCD0_D3), GPIO_FN(LCD0_D4), GPIO_FN(LCD0_D5),
+ GPIO_FN(LCD0_D6), GPIO_FN(LCD0_D7), GPIO_FN(LCD0_D8),
+ GPIO_FN(LCD0_D9), GPIO_FN(LCD0_D10), GPIO_FN(LCD0_D11),
+ GPIO_FN(LCD0_D12), GPIO_FN(LCD0_D13), GPIO_FN(LCD0_D14),
+ GPIO_FN(LCD0_D15), GPIO_FN(LCD0_D16), GPIO_FN(LCD0_D17),
+ GPIO_FN(LCD0_DON), GPIO_FN(LCD0_VCPWC), GPIO_FN(LCD0_VEPWC),
+ GPIO_FN(LCD0_DCK), GPIO_FN(LCD0_VSYN),
+ GPIO_FN(LCD0_HSYN), GPIO_FN(LCD0_DISP),
+ GPIO_FN(LCD0_WR), GPIO_FN(LCD0_RD),
+ GPIO_FN(LCD0_CS), GPIO_FN(LCD0_RS),
+
+ GPIO_FN(LCD0_D18_PORT163), GPIO_FN(LCD0_D19_PORT162),
+ GPIO_FN(LCD0_D20_PORT161), GPIO_FN(LCD0_D21_PORT158),
+ GPIO_FN(LCD0_D22_PORT160), GPIO_FN(LCD0_D23_PORT159),
+ GPIO_FN(LCD0_LCLK_PORT165), /* MSEL5CR_6_1 */
+
+ GPIO_FN(LCD0_D18_PORT40), GPIO_FN(LCD0_D19_PORT4),
+ GPIO_FN(LCD0_D20_PORT3), GPIO_FN(LCD0_D21_PORT2),
+ GPIO_FN(LCD0_D22_PORT0), GPIO_FN(LCD0_D23_PORT1),
+ GPIO_FN(LCD0_LCLK_PORT102), /* MSEL5CR_6_0 */
+
+ /* LCD1 */
+ GPIO_FN(LCD1_D0), GPIO_FN(LCD1_D1), GPIO_FN(LCD1_D2),
+ GPIO_FN(LCD1_D3), GPIO_FN(LCD1_D4), GPIO_FN(LCD1_D5),
+ GPIO_FN(LCD1_D6), GPIO_FN(LCD1_D7), GPIO_FN(LCD1_D8),
+ GPIO_FN(LCD1_D9), GPIO_FN(LCD1_D10), GPIO_FN(LCD1_D11),
+ GPIO_FN(LCD1_D12), GPIO_FN(LCD1_D13), GPIO_FN(LCD1_D14),
+ GPIO_FN(LCD1_D15), GPIO_FN(LCD1_D16), GPIO_FN(LCD1_D17),
+ GPIO_FN(LCD1_D18), GPIO_FN(LCD1_D19), GPIO_FN(LCD1_D20),
+ GPIO_FN(LCD1_D21), GPIO_FN(LCD1_D22), GPIO_FN(LCD1_D23),
+ GPIO_FN(LCD1_RS), GPIO_FN(LCD1_RD), GPIO_FN(LCD1_CS),
+ GPIO_FN(LCD1_WR), GPIO_FN(LCD1_DCK), GPIO_FN(LCD1_DON),
+ GPIO_FN(LCD1_VCPWC), GPIO_FN(LCD1_LCLK), GPIO_FN(LCD1_HSYN),
+ GPIO_FN(LCD1_VSYN), GPIO_FN(LCD1_VEPWC), GPIO_FN(LCD1_DISP),
+
+ /* RSPI */
+ GPIO_FN(RSPI_SSL0_A), GPIO_FN(RSPI_SSL1_A), GPIO_FN(RSPI_SSL2_A),
+ GPIO_FN(RSPI_SSL3_A), GPIO_FN(RSPI_CK_A), GPIO_FN(RSPI_MOSI_A),
+ GPIO_FN(RSPI_MISO_A),
+
+ /* VIO CKO */
+ GPIO_FN(VIO_CKO1),
+ GPIO_FN(VIO_CKO2),
+ GPIO_FN(VIO_CKO_1),
+ GPIO_FN(VIO_CKO),
+
+ /* VIO0 */
+ GPIO_FN(VIO0_D0), GPIO_FN(VIO0_D1), GPIO_FN(VIO0_D2),
+ GPIO_FN(VIO0_D3), GPIO_FN(VIO0_D4), GPIO_FN(VIO0_D5),
+ GPIO_FN(VIO0_D6), GPIO_FN(VIO0_D7), GPIO_FN(VIO0_D8),
+ GPIO_FN(VIO0_D9), GPIO_FN(VIO0_D10), GPIO_FN(VIO0_D11),
+ GPIO_FN(VIO0_D12), GPIO_FN(VIO0_VD), GPIO_FN(VIO0_HD),
+ GPIO_FN(VIO0_CLK), GPIO_FN(VIO0_FIELD),
+
+ GPIO_FN(VIO0_D13_PORT26), /* MSEL5CR_27_0 */
+ GPIO_FN(VIO0_D14_PORT25),
+ GPIO_FN(VIO0_D15_PORT24),
+
+ GPIO_FN(VIO0_D13_PORT22), /* MSEL5CR_27_1 */
+ GPIO_FN(VIO0_D14_PORT95),
+ GPIO_FN(VIO0_D15_PORT96),
+
+ /* VIO1 */
+ GPIO_FN(VIO1_D0), GPIO_FN(VIO1_D1), GPIO_FN(VIO1_D2),
+ GPIO_FN(VIO1_D3), GPIO_FN(VIO1_D4), GPIO_FN(VIO1_D5),
+ GPIO_FN(VIO1_D6), GPIO_FN(VIO1_D7), GPIO_FN(VIO1_VD),
+ GPIO_FN(VIO1_HD), GPIO_FN(VIO1_CLK), GPIO_FN(VIO1_FIELD),
+
+ /* TPU0 */
+ GPIO_FN(TPU0TO0), GPIO_FN(TPU0TO1), GPIO_FN(TPU0TO3),
+ GPIO_FN(TPU0TO2_PORT66), /* TPU0TO2 Port 66/202 */
+ GPIO_FN(TPU0TO2_PORT202),
+
+ /* SSP1 0 */
+ GPIO_FN(STP0_IPD0), GPIO_FN(STP0_IPD1), GPIO_FN(STP0_IPD2),
+ GPIO_FN(STP0_IPD3), GPIO_FN(STP0_IPD4), GPIO_FN(STP0_IPD5),
+ GPIO_FN(STP0_IPD6), GPIO_FN(STP0_IPD7), GPIO_FN(STP0_IPEN),
+ GPIO_FN(STP0_IPCLK), GPIO_FN(STP0_IPSYNC),
+
+ /* SSP1 1 */
+ GPIO_FN(STP1_IPD1), GPIO_FN(STP1_IPD2), GPIO_FN(STP1_IPD3),
+ GPIO_FN(STP1_IPD4), GPIO_FN(STP1_IPD5), GPIO_FN(STP1_IPD6),
+ GPIO_FN(STP1_IPD7), GPIO_FN(STP1_IPCLK), GPIO_FN(STP1_IPSYNC),
+
+ GPIO_FN(STP1_IPD0_PORT186), /* MSEL5CR_23_0 */
+ GPIO_FN(STP1_IPEN_PORT187),
+
+ GPIO_FN(STP1_IPD0_PORT194), /* MSEL5CR_23_1 */
+ GPIO_FN(STP1_IPEN_PORT193),
+
+ /* SIM */
+ GPIO_FN(SIM_RST), GPIO_FN(SIM_CLK),
+ GPIO_FN(SIM_D_PORT22), /* SIM_D Port 22/199 */
+ GPIO_FN(SIM_D_PORT199),
+
+ /* SDHI0 */
+ GPIO_FN(SDHI0_D0), GPIO_FN(SDHI0_D1), GPIO_FN(SDHI0_D2),
+ GPIO_FN(SDHI0_D3), GPIO_FN(SDHI0_CD), GPIO_FN(SDHI0_WP),
+ GPIO_FN(SDHI0_CMD), GPIO_FN(SDHI0_CLK),
+
+ /* SDHI1 */
+ GPIO_FN(SDHI1_D0), GPIO_FN(SDHI1_D1), GPIO_FN(SDHI1_D2),
+ GPIO_FN(SDHI1_D3), GPIO_FN(SDHI1_CD), GPIO_FN(SDHI1_WP),
+ GPIO_FN(SDHI1_CMD), GPIO_FN(SDHI1_CLK),
+
+ /* SDHI2 */
+ GPIO_FN(SDHI2_D0), GPIO_FN(SDHI2_D1), GPIO_FN(SDHI2_D2),
+ GPIO_FN(SDHI2_D3), GPIO_FN(SDHI2_CLK), GPIO_FN(SDHI2_CMD),
+
+ GPIO_FN(SDHI2_CD_PORT24), /* MSEL5CR_19_0 */
+ GPIO_FN(SDHI2_WP_PORT25),
+
+ GPIO_FN(SDHI2_WP_PORT177), /* MSEL5CR_19_1 */
+ GPIO_FN(SDHI2_CD_PORT202),
+
+ /* MSIOF2 */
+ GPIO_FN(MSIOF2_TXD), GPIO_FN(MSIOF2_RXD), GPIO_FN(MSIOF2_TSCK),
+ GPIO_FN(MSIOF2_SS2), GPIO_FN(MSIOF2_TSYNC), GPIO_FN(MSIOF2_SS1),
+ GPIO_FN(MSIOF2_MCK1), GPIO_FN(MSIOF2_MCK0), GPIO_FN(MSIOF2_RSYNC),
+ GPIO_FN(MSIOF2_RSCK),
+
+ /* KEYSC */
+ GPIO_FN(KEYIN4), GPIO_FN(KEYIN5),
+ GPIO_FN(KEYIN6), GPIO_FN(KEYIN7),
+ GPIO_FN(KEYOUT0), GPIO_FN(KEYOUT1), GPIO_FN(KEYOUT2),
+ GPIO_FN(KEYOUT3), GPIO_FN(KEYOUT4), GPIO_FN(KEYOUT5),
+ GPIO_FN(KEYOUT6), GPIO_FN(KEYOUT7),
+
+ GPIO_FN(KEYIN0_PORT43), /* MSEL4CR_18_0 */
+ GPIO_FN(KEYIN1_PORT44),
+ GPIO_FN(KEYIN2_PORT45),
+ GPIO_FN(KEYIN3_PORT46),
+
+ GPIO_FN(KEYIN0_PORT58), /* MSEL4CR_18_1 */
+ GPIO_FN(KEYIN1_PORT57),
+ GPIO_FN(KEYIN2_PORT56),
+ GPIO_FN(KEYIN3_PORT55),
+
+ /* VOU */
+ GPIO_FN(DV_D0), GPIO_FN(DV_D1), GPIO_FN(DV_D2),
+ GPIO_FN(DV_D3), GPIO_FN(DV_D4), GPIO_FN(DV_D5),
+ GPIO_FN(DV_D6), GPIO_FN(DV_D7), GPIO_FN(DV_D8),
+ GPIO_FN(DV_D9), GPIO_FN(DV_D10), GPIO_FN(DV_D11),
+ GPIO_FN(DV_D12), GPIO_FN(DV_D13), GPIO_FN(DV_D14),
+ GPIO_FN(DV_D15), GPIO_FN(DV_CLK),
+ GPIO_FN(DV_VSYNC), GPIO_FN(DV_HSYNC),
+
+ /* MEMC */
+ GPIO_FN(MEMC_AD0), GPIO_FN(MEMC_AD1), GPIO_FN(MEMC_AD2),
+ GPIO_FN(MEMC_AD3), GPIO_FN(MEMC_AD4), GPIO_FN(MEMC_AD5),
+ GPIO_FN(MEMC_AD6), GPIO_FN(MEMC_AD7), GPIO_FN(MEMC_AD8),
+ GPIO_FN(MEMC_AD9), GPIO_FN(MEMC_AD10), GPIO_FN(MEMC_AD11),
+ GPIO_FN(MEMC_AD12), GPIO_FN(MEMC_AD13), GPIO_FN(MEMC_AD14),
+ GPIO_FN(MEMC_AD15), GPIO_FN(MEMC_CS0), GPIO_FN(MEMC_INT),
+ GPIO_FN(MEMC_NWE), GPIO_FN(MEMC_NOE), GPIO_FN(MEMC_CS1),
+ GPIO_FN(MEMC_A1), GPIO_FN(MEMC_ADV), GPIO_FN(MEMC_DREQ0),
+ GPIO_FN(MEMC_WAIT), GPIO_FN(MEMC_DREQ1), GPIO_FN(MEMC_BUSCLK),
+ GPIO_FN(MEMC_A0),
+
+ /* MMC */
+ GPIO_FN(MMC0_D0_PORT68), GPIO_FN(MMC0_D1_PORT69),
+ GPIO_FN(MMC0_D2_PORT70), GPIO_FN(MMC0_D3_PORT71),
+ GPIO_FN(MMC0_D4_PORT72), GPIO_FN(MMC0_D5_PORT73),
+ GPIO_FN(MMC0_D6_PORT74), GPIO_FN(MMC0_D7_PORT75),
+ GPIO_FN(MMC0_CLK_PORT66),
+ GPIO_FN(MMC0_CMD_PORT67), /* MSEL4CR_15_0 */
+
+ GPIO_FN(MMC1_D0_PORT149), GPIO_FN(MMC1_D1_PORT148),
+ GPIO_FN(MMC1_D2_PORT147), GPIO_FN(MMC1_D3_PORT146),
+ GPIO_FN(MMC1_D4_PORT145), GPIO_FN(MMC1_D5_PORT144),
+ GPIO_FN(MMC1_D6_PORT143), GPIO_FN(MMC1_D7_PORT142),
+ GPIO_FN(MMC1_CLK_PORT103),
+ GPIO_FN(MMC1_CMD_PORT104), /* MSEL4CR_15_1 */
+
+ /* MSIOF0 */
+ GPIO_FN(MSIOF0_SS1), GPIO_FN(MSIOF0_SS2), GPIO_FN(MSIOF0_RXD),
+ GPIO_FN(MSIOF0_TXD), GPIO_FN(MSIOF0_MCK0), GPIO_FN(MSIOF0_MCK1),
+ GPIO_FN(MSIOF0_RSYNC), GPIO_FN(MSIOF0_RSCK), GPIO_FN(MSIOF0_TSCK),
+ GPIO_FN(MSIOF0_TSYNC),
+
+ /* MSIOF1 */
+ GPIO_FN(MSIOF1_RSCK), GPIO_FN(MSIOF1_RSYNC),
+ GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1),
+
+ GPIO_FN(MSIOF1_SS2_PORT116), GPIO_FN(MSIOF1_SS1_PORT117),
+ GPIO_FN(MSIOF1_RXD_PORT118), GPIO_FN(MSIOF1_TXD_PORT119),
+ GPIO_FN(MSIOF1_TSYNC_PORT120),
+ GPIO_FN(MSIOF1_TSCK_PORT121), /* MSEL4CR_10_0 */
+
+ GPIO_FN(MSIOF1_SS1_PORT67), GPIO_FN(MSIOF1_TSCK_PORT72),
+ GPIO_FN(MSIOF1_TSYNC_PORT73), GPIO_FN(MSIOF1_TXD_PORT74),
+ GPIO_FN(MSIOF1_RXD_PORT75),
+ GPIO_FN(MSIOF1_SS2_PORT202), /* MSEL4CR_10_1 */
+
+ /* GPIO */
+ GPIO_FN(GPO0), GPIO_FN(GPI0),
+ GPIO_FN(GPO1), GPIO_FN(GPI1),
+
+ /* USB0 */
+ GPIO_FN(USB0_OCI), GPIO_FN(USB0_PPON), GPIO_FN(VBUS),
+
+ /* USB1 */
+ GPIO_FN(USB1_OCI), GPIO_FN(USB1_PPON),
+
+ /* BBIF1 */
+ GPIO_FN(BBIF1_RXD), GPIO_FN(BBIF1_TXD), GPIO_FN(BBIF1_TSYNC),
+ GPIO_FN(BBIF1_TSCK), GPIO_FN(BBIF1_RSCK), GPIO_FN(BBIF1_RSYNC),
+ GPIO_FN(BBIF1_FLOW), GPIO_FN(BBIF1_RX_FLOW_N),
+
+ /* BBIF2 */
+ GPIO_FN(BBIF2_TXD2_PORT5), /* MSEL5CR_0_0 */
+ GPIO_FN(BBIF2_RXD2_PORT60),
+ GPIO_FN(BBIF2_TSYNC2_PORT6),
+ GPIO_FN(BBIF2_TSCK2_PORT59),
+
+ GPIO_FN(BBIF2_RXD2_PORT90), /* MSEL5CR_0_1 */
+ GPIO_FN(BBIF2_TXD2_PORT183),
+ GPIO_FN(BBIF2_TSCK2_PORT89),
+ GPIO_FN(BBIF2_TSYNC2_PORT184),
+
+ /* BSC / FLCTL / PCMCIA */
+ GPIO_FN(CS0), GPIO_FN(CS2), GPIO_FN(CS4),
+ GPIO_FN(CS5B), GPIO_FN(CS6A),
+ GPIO_FN(CS5A_PORT105), /* CS5A PORT 19/105 */
+ GPIO_FN(CS5A_PORT19),
+ GPIO_FN(IOIS16), /* ? */
+
+ GPIO_FN(A0), GPIO_FN(A1), GPIO_FN(A2), GPIO_FN(A3),
+ GPIO_FN(A4_FOE), GPIO_FN(A5_FCDE), /* share with FLCTL */
+ GPIO_FN(A6), GPIO_FN(A7), GPIO_FN(A8), GPIO_FN(A9),
+ GPIO_FN(A10), GPIO_FN(A11), GPIO_FN(A12), GPIO_FN(A13),
+ GPIO_FN(A14), GPIO_FN(A15), GPIO_FN(A16), GPIO_FN(A17),
+ GPIO_FN(A18), GPIO_FN(A19), GPIO_FN(A20), GPIO_FN(A21),
+ GPIO_FN(A22), GPIO_FN(A23), GPIO_FN(A24), GPIO_FN(A25),
+ GPIO_FN(A26),
+
+ GPIO_FN(D0_NAF0), GPIO_FN(D1_NAF1), /* share with FLCTL */
+ GPIO_FN(D2_NAF2), GPIO_FN(D3_NAF3), /* share with FLCTL */
+ GPIO_FN(D4_NAF4), GPIO_FN(D5_NAF5), /* share with FLCTL */
+ GPIO_FN(D6_NAF6), GPIO_FN(D7_NAF7), /* share with FLCTL */
+ GPIO_FN(D8_NAF8), GPIO_FN(D9_NAF9), /* share with FLCTL */
+ GPIO_FN(D10_NAF10), GPIO_FN(D11_NAF11), /* share with FLCTL */
+ GPIO_FN(D12_NAF12), GPIO_FN(D13_NAF13), /* share with FLCTL */
+ GPIO_FN(D14_NAF14), GPIO_FN(D15_NAF15), /* share with FLCTL */
+ GPIO_FN(D16), GPIO_FN(D17), GPIO_FN(D18), GPIO_FN(D19),
+ GPIO_FN(D20), GPIO_FN(D21), GPIO_FN(D22), GPIO_FN(D23),
+ GPIO_FN(D24), GPIO_FN(D25), GPIO_FN(D26), GPIO_FN(D27),
+ GPIO_FN(D28), GPIO_FN(D29), GPIO_FN(D30), GPIO_FN(D31),
+
+ GPIO_FN(WE0_FWE), /* share with FLCTL */
+ GPIO_FN(WE1),
+ GPIO_FN(WE2_ICIORD), /* share with PCMCIA */
+ GPIO_FN(WE3_ICIOWR), /* share with PCMCIA */
+ GPIO_FN(CKO), GPIO_FN(BS), GPIO_FN(RDWR),
+ GPIO_FN(RD_FSC), /* share with FLCTL */
+ GPIO_FN(WAIT_PORT177), /* WAIT Port 90/177 */
+ GPIO_FN(WAIT_PORT90),
+
+ GPIO_FN(FCE0), GPIO_FN(FCE1), GPIO_FN(FRB), /* FLCTL */
+
+ /* IRDA */
+ GPIO_FN(IRDA_FIRSEL), GPIO_FN(IRDA_IN), GPIO_FN(IRDA_OUT),
+
+ /* ATAPI */
+ GPIO_FN(IDE_D0), GPIO_FN(IDE_D1), GPIO_FN(IDE_D2),
+ GPIO_FN(IDE_D3), GPIO_FN(IDE_D4), GPIO_FN(IDE_D5),
+ GPIO_FN(IDE_D6), GPIO_FN(IDE_D7), GPIO_FN(IDE_D8),
+ GPIO_FN(IDE_D9), GPIO_FN(IDE_D10), GPIO_FN(IDE_D11),
+ GPIO_FN(IDE_D12), GPIO_FN(IDE_D13), GPIO_FN(IDE_D14),
+ GPIO_FN(IDE_D15), GPIO_FN(IDE_A0), GPIO_FN(IDE_A1),
+ GPIO_FN(IDE_A2), GPIO_FN(IDE_CS0), GPIO_FN(IDE_CS1),
+ GPIO_FN(IDE_IOWR), GPIO_FN(IDE_IORD), GPIO_FN(IDE_IORDY),
+ GPIO_FN(IDE_INT), GPIO_FN(IDE_RST), GPIO_FN(IDE_DIRECTION),
+ GPIO_FN(IDE_EXBUF_ENB), GPIO_FN(IDE_IODACK), GPIO_FN(IDE_IODREQ),
+
+ /* RMII */
+ GPIO_FN(RMII_CRS_DV), GPIO_FN(RMII_RX_ER), GPIO_FN(RMII_RXD0),
+ GPIO_FN(RMII_RXD1), GPIO_FN(RMII_TX_EN), GPIO_FN(RMII_TXD0),
+ GPIO_FN(RMII_MDC), GPIO_FN(RMII_TXD1), GPIO_FN(RMII_MDIO),
+ GPIO_FN(RMII_REF50CK), GPIO_FN(RMII_REF125CK), /* for GMII */
+
+ /* GEther */
+ GPIO_FN(ET_TX_CLK), GPIO_FN(ET_TX_EN), GPIO_FN(ET_ETXD0),
+ GPIO_FN(ET_ETXD1), GPIO_FN(ET_ETXD2), GPIO_FN(ET_ETXD3),
+ GPIO_FN(ET_ETXD4), GPIO_FN(ET_ETXD5), /* for GEther */
+ GPIO_FN(ET_ETXD6), GPIO_FN(ET_ETXD7), /* for GEther */
+ GPIO_FN(ET_COL), GPIO_FN(ET_TX_ER), GPIO_FN(ET_RX_CLK),
+ GPIO_FN(ET_RX_DV), GPIO_FN(ET_ERXD0), GPIO_FN(ET_ERXD1),
+ GPIO_FN(ET_ERXD2), GPIO_FN(ET_ERXD3),
+ GPIO_FN(ET_ERXD4), GPIO_FN(ET_ERXD5), /* for GEther */
+ GPIO_FN(ET_ERXD6), GPIO_FN(ET_ERXD7), /* for GEther */
+ GPIO_FN(ET_RX_ER), GPIO_FN(ET_CRS), GPIO_FN(ET_MDC),
+ GPIO_FN(ET_MDIO), GPIO_FN(ET_LINK), GPIO_FN(ET_PHY_INT),
+ GPIO_FN(ET_WOL), GPIO_FN(ET_GTX_CLK),
+
+ /* DMA0 */
+ GPIO_FN(DREQ0), GPIO_FN(DACK0),
+
+ /* DMA1 */
+ GPIO_FN(DREQ1), GPIO_FN(DACK1),
+
+ /* SYSC */
+ GPIO_FN(RESETOUTS),
+
+ /* IRREM */
+ GPIO_FN(IROUT),
+
+ /* LCDC */
+ GPIO_FN(LCDC0_SELECT),
+ GPIO_FN(LCDC1_SELECT),
+
+ /* SDENC */
+ GPIO_FN(SDENC_CPG),
+ GPIO_FN(SDENC_DV_CLKI),
+
+ /* SYSC */
+ GPIO_FN(RESETP_PULLUP),
+ GPIO_FN(RESETP_PLAIN),
+
+ /* DEBUG */
+ GPIO_FN(EDEBGREQ_PULLDOWN),
+ GPIO_FN(EDEBGREQ_PULLUP),
+
+ GPIO_FN(TRACEAUD_FROM_VIO),
+ GPIO_FN(TRACEAUD_FROM_LCDC0),
+ GPIO_FN(TRACEAUD_FROM_MEMC),
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+ PORTCR(0, 0xe6050000), /* PORT0CR */
+ PORTCR(1, 0xe6050001), /* PORT1CR */
+ PORTCR(2, 0xe6050002), /* PORT2CR */
+ PORTCR(3, 0xe6050003), /* PORT3CR */
+ PORTCR(4, 0xe6050004), /* PORT4CR */
+ PORTCR(5, 0xe6050005), /* PORT5CR */
+ PORTCR(6, 0xe6050006), /* PORT6CR */
+ PORTCR(7, 0xe6050007), /* PORT7CR */
+ PORTCR(8, 0xe6050008), /* PORT8CR */
+ PORTCR(9, 0xe6050009), /* PORT9CR */
+ PORTCR(10, 0xe605000a), /* PORT10CR */
+ PORTCR(11, 0xe605000b), /* PORT11CR */
+ PORTCR(12, 0xe605000c), /* PORT12CR */
+ PORTCR(13, 0xe605000d), /* PORT13CR */
+ PORTCR(14, 0xe605000e), /* PORT14CR */
+ PORTCR(15, 0xe605000f), /* PORT15CR */
+ PORTCR(16, 0xe6050010), /* PORT16CR */
+ PORTCR(17, 0xe6050011), /* PORT17CR */
+ PORTCR(18, 0xe6050012), /* PORT18CR */
+ PORTCR(19, 0xe6050013), /* PORT19CR */
+ PORTCR(20, 0xe6050014), /* PORT20CR */
+ PORTCR(21, 0xe6050015), /* PORT21CR */
+ PORTCR(22, 0xe6050016), /* PORT22CR */
+ PORTCR(23, 0xe6050017), /* PORT23CR */
+ PORTCR(24, 0xe6050018), /* PORT24CR */
+ PORTCR(25, 0xe6050019), /* PORT25CR */
+ PORTCR(26, 0xe605001a), /* PORT26CR */
+ PORTCR(27, 0xe605001b), /* PORT27CR */
+ PORTCR(28, 0xe605001c), /* PORT28CR */
+ PORTCR(29, 0xe605001d), /* PORT29CR */
+ PORTCR(30, 0xe605001e), /* PORT30CR */
+ PORTCR(31, 0xe605001f), /* PORT31CR */
+ PORTCR(32, 0xe6050020), /* PORT32CR */
+ PORTCR(33, 0xe6050021), /* PORT33CR */
+ PORTCR(34, 0xe6050022), /* PORT34CR */
+ PORTCR(35, 0xe6050023), /* PORT35CR */
+ PORTCR(36, 0xe6050024), /* PORT36CR */
+ PORTCR(37, 0xe6050025), /* PORT37CR */
+ PORTCR(38, 0xe6050026), /* PORT38CR */
+ PORTCR(39, 0xe6050027), /* PORT39CR */
+ PORTCR(40, 0xe6050028), /* PORT40CR */
+ PORTCR(41, 0xe6050029), /* PORT41CR */
+ PORTCR(42, 0xe605002a), /* PORT42CR */
+ PORTCR(43, 0xe605002b), /* PORT43CR */
+ PORTCR(44, 0xe605002c), /* PORT44CR */
+ PORTCR(45, 0xe605002d), /* PORT45CR */
+ PORTCR(46, 0xe605002e), /* PORT46CR */
+ PORTCR(47, 0xe605002f), /* PORT47CR */
+ PORTCR(48, 0xe6050030), /* PORT48CR */
+ PORTCR(49, 0xe6050031), /* PORT49CR */
+ PORTCR(50, 0xe6050032), /* PORT50CR */
+ PORTCR(51, 0xe6050033), /* PORT51CR */
+ PORTCR(52, 0xe6050034), /* PORT52CR */
+ PORTCR(53, 0xe6050035), /* PORT53CR */
+ PORTCR(54, 0xe6050036), /* PORT54CR */
+ PORTCR(55, 0xe6050037), /* PORT55CR */
+ PORTCR(56, 0xe6050038), /* PORT56CR */
+ PORTCR(57, 0xe6050039), /* PORT57CR */
+ PORTCR(58, 0xe605003a), /* PORT58CR */
+ PORTCR(59, 0xe605003b), /* PORT59CR */
+ PORTCR(60, 0xe605003c), /* PORT60CR */
+ PORTCR(61, 0xe605003d), /* PORT61CR */
+ PORTCR(62, 0xe605003e), /* PORT62CR */
+ PORTCR(63, 0xe605003f), /* PORT63CR */
+ PORTCR(64, 0xe6050040), /* PORT64CR */
+ PORTCR(65, 0xe6050041), /* PORT65CR */
+ PORTCR(66, 0xe6050042), /* PORT66CR */
+ PORTCR(67, 0xe6050043), /* PORT67CR */
+ PORTCR(68, 0xe6050044), /* PORT68CR */
+ PORTCR(69, 0xe6050045), /* PORT69CR */
+ PORTCR(70, 0xe6050046), /* PORT70CR */
+ PORTCR(71, 0xe6050047), /* PORT71CR */
+ PORTCR(72, 0xe6050048), /* PORT72CR */
+ PORTCR(73, 0xe6050049), /* PORT73CR */
+ PORTCR(74, 0xe605004a), /* PORT74CR */
+ PORTCR(75, 0xe605004b), /* PORT75CR */
+ PORTCR(76, 0xe605004c), /* PORT76CR */
+ PORTCR(77, 0xe605004d), /* PORT77CR */
+ PORTCR(78, 0xe605004e), /* PORT78CR */
+ PORTCR(79, 0xe605004f), /* PORT79CR */
+ PORTCR(80, 0xe6050050), /* PORT80CR */
+ PORTCR(81, 0xe6050051), /* PORT81CR */
+ PORTCR(82, 0xe6050052), /* PORT82CR */
+ PORTCR(83, 0xe6050053), /* PORT83CR */
+
+ PORTCR(84, 0xe6051054), /* PORT84CR */
+ PORTCR(85, 0xe6051055), /* PORT85CR */
+ PORTCR(86, 0xe6051056), /* PORT86CR */
+ PORTCR(87, 0xe6051057), /* PORT87CR */
+ PORTCR(88, 0xe6051058), /* PORT88CR */
+ PORTCR(89, 0xe6051059), /* PORT89CR */
+ PORTCR(90, 0xe605105a), /* PORT90CR */
+ PORTCR(91, 0xe605105b), /* PORT91CR */
+ PORTCR(92, 0xe605105c), /* PORT92CR */
+ PORTCR(93, 0xe605105d), /* PORT93CR */
+ PORTCR(94, 0xe605105e), /* PORT94CR */
+ PORTCR(95, 0xe605105f), /* PORT95CR */
+ PORTCR(96, 0xe6051060), /* PORT96CR */
+ PORTCR(97, 0xe6051061), /* PORT97CR */
+ PORTCR(98, 0xe6051062), /* PORT98CR */
+ PORTCR(99, 0xe6051063), /* PORT99CR */
+ PORTCR(100, 0xe6051064), /* PORT100CR */
+ PORTCR(101, 0xe6051065), /* PORT101CR */
+ PORTCR(102, 0xe6051066), /* PORT102CR */
+ PORTCR(103, 0xe6051067), /* PORT103CR */
+ PORTCR(104, 0xe6051068), /* PORT104CR */
+ PORTCR(105, 0xe6051069), /* PORT105CR */
+ PORTCR(106, 0xe605106a), /* PORT106CR */
+ PORTCR(107, 0xe605106b), /* PORT107CR */
+ PORTCR(108, 0xe605106c), /* PORT108CR */
+ PORTCR(109, 0xe605106d), /* PORT109CR */
+ PORTCR(110, 0xe605106e), /* PORT110CR */
+ PORTCR(111, 0xe605106f), /* PORT111CR */
+ PORTCR(112, 0xe6051070), /* PORT112CR */
+ PORTCR(113, 0xe6051071), /* PORT113CR */
+ PORTCR(114, 0xe6051072), /* PORT114CR */
+
+ PORTCR(115, 0xe6052073), /* PORT115CR */
+ PORTCR(116, 0xe6052074), /* PORT116CR */
+ PORTCR(117, 0xe6052075), /* PORT117CR */
+ PORTCR(118, 0xe6052076), /* PORT118CR */
+ PORTCR(119, 0xe6052077), /* PORT119CR */
+ PORTCR(120, 0xe6052078), /* PORT120CR */
+ PORTCR(121, 0xe6052079), /* PORT121CR */
+ PORTCR(122, 0xe605207a), /* PORT122CR */
+ PORTCR(123, 0xe605207b), /* PORT123CR */
+ PORTCR(124, 0xe605207c), /* PORT124CR */
+ PORTCR(125, 0xe605207d), /* PORT125CR */
+ PORTCR(126, 0xe605207e), /* PORT126CR */
+ PORTCR(127, 0xe605207f), /* PORT127CR */
+ PORTCR(128, 0xe6052080), /* PORT128CR */
+ PORTCR(129, 0xe6052081), /* PORT129CR */
+ PORTCR(130, 0xe6052082), /* PORT130CR */
+ PORTCR(131, 0xe6052083), /* PORT131CR */
+ PORTCR(132, 0xe6052084), /* PORT132CR */
+ PORTCR(133, 0xe6052085), /* PORT133CR */
+ PORTCR(134, 0xe6052086), /* PORT134CR */
+ PORTCR(135, 0xe6052087), /* PORT135CR */
+ PORTCR(136, 0xe6052088), /* PORT136CR */
+ PORTCR(137, 0xe6052089), /* PORT137CR */
+ PORTCR(138, 0xe605208a), /* PORT138CR */
+ PORTCR(139, 0xe605208b), /* PORT139CR */
+ PORTCR(140, 0xe605208c), /* PORT140CR */
+ PORTCR(141, 0xe605208d), /* PORT141CR */
+ PORTCR(142, 0xe605208e), /* PORT142CR */
+ PORTCR(143, 0xe605208f), /* PORT143CR */
+ PORTCR(144, 0xe6052090), /* PORT144CR */
+ PORTCR(145, 0xe6052091), /* PORT145CR */
+ PORTCR(146, 0xe6052092), /* PORT146CR */
+ PORTCR(147, 0xe6052093), /* PORT147CR */
+ PORTCR(148, 0xe6052094), /* PORT148CR */
+ PORTCR(149, 0xe6052095), /* PORT149CR */
+ PORTCR(150, 0xe6052096), /* PORT150CR */
+ PORTCR(151, 0xe6052097), /* PORT151CR */
+ PORTCR(152, 0xe6052098), /* PORT152CR */
+ PORTCR(153, 0xe6052099), /* PORT153CR */
+ PORTCR(154, 0xe605209a), /* PORT154CR */
+ PORTCR(155, 0xe605209b), /* PORT155CR */
+ PORTCR(156, 0xe605209c), /* PORT156CR */
+ PORTCR(157, 0xe605209d), /* PORT157CR */
+ PORTCR(158, 0xe605209e), /* PORT158CR */
+ PORTCR(159, 0xe605209f), /* PORT159CR */
+ PORTCR(160, 0xe60520a0), /* PORT160CR */
+ PORTCR(161, 0xe60520a1), /* PORT161CR */
+ PORTCR(162, 0xe60520a2), /* PORT162CR */
+ PORTCR(163, 0xe60520a3), /* PORT163CR */
+ PORTCR(164, 0xe60520a4), /* PORT164CR */
+ PORTCR(165, 0xe60520a5), /* PORT165CR */
+ PORTCR(166, 0xe60520a6), /* PORT166CR */
+ PORTCR(167, 0xe60520a7), /* PORT167CR */
+ PORTCR(168, 0xe60520a8), /* PORT168CR */
+ PORTCR(169, 0xe60520a9), /* PORT169CR */
+ PORTCR(170, 0xe60520aa), /* PORT170CR */
+ PORTCR(171, 0xe60520ab), /* PORT171CR */
+ PORTCR(172, 0xe60520ac), /* PORT172CR */
+ PORTCR(173, 0xe60520ad), /* PORT173CR */
+ PORTCR(174, 0xe60520ae), /* PORT174CR */
+ PORTCR(175, 0xe60520af), /* PORT175CR */
+ PORTCR(176, 0xe60520b0), /* PORT176CR */
+ PORTCR(177, 0xe60520b1), /* PORT177CR */
+ PORTCR(178, 0xe60520b2), /* PORT178CR */
+ PORTCR(179, 0xe60520b3), /* PORT179CR */
+ PORTCR(180, 0xe60520b4), /* PORT180CR */
+ PORTCR(181, 0xe60520b5), /* PORT181CR */
+ PORTCR(182, 0xe60520b6), /* PORT182CR */
+ PORTCR(183, 0xe60520b7), /* PORT183CR */
+ PORTCR(184, 0xe60520b8), /* PORT184CR */
+ PORTCR(185, 0xe60520b9), /* PORT185CR */
+ PORTCR(186, 0xe60520ba), /* PORT186CR */
+ PORTCR(187, 0xe60520bb), /* PORT187CR */
+ PORTCR(188, 0xe60520bc), /* PORT188CR */
+ PORTCR(189, 0xe60520bd), /* PORT189CR */
+ PORTCR(190, 0xe60520be), /* PORT190CR */
+ PORTCR(191, 0xe60520bf), /* PORT191CR */
+ PORTCR(192, 0xe60520c0), /* PORT192CR */
+ PORTCR(193, 0xe60520c1), /* PORT193CR */
+ PORTCR(194, 0xe60520c2), /* PORT194CR */
+ PORTCR(195, 0xe60520c3), /* PORT195CR */
+ PORTCR(196, 0xe60520c4), /* PORT196CR */
+ PORTCR(197, 0xe60520c5), /* PORT197CR */
+ PORTCR(198, 0xe60520c6), /* PORT198CR */
+ PORTCR(199, 0xe60520c7), /* PORT199CR */
+ PORTCR(200, 0xe60520c8), /* PORT200CR */
+ PORTCR(201, 0xe60520c9), /* PORT201CR */
+ PORTCR(202, 0xe60520ca), /* PORT202CR */
+ PORTCR(203, 0xe60520cb), /* PORT203CR */
+ PORTCR(204, 0xe60520cc), /* PORT204CR */
+ PORTCR(205, 0xe60520cd), /* PORT205CR */
+ PORTCR(206, 0xe60520ce), /* PORT206CR */
+ PORTCR(207, 0xe60520cf), /* PORT207CR */
+ PORTCR(208, 0xe60520d0), /* PORT208CR */
+ PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+ PORTCR(210, 0xe60530d2), /* PORT210CR */
+ PORTCR(211, 0xe60530d3), /* PORT211CR */
+
+ { PINMUX_CFG_REG("MSEL1CR", 0xe605800c, 32, 1) {
+ MSEL1CR_31_0, MSEL1CR_31_1,
+ MSEL1CR_30_0, MSEL1CR_30_1,
+ MSEL1CR_29_0, MSEL1CR_29_1,
+ MSEL1CR_28_0, MSEL1CR_28_1,
+ MSEL1CR_27_0, MSEL1CR_27_1,
+ MSEL1CR_26_0, MSEL1CR_26_1,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ MSEL1CR_16_0, MSEL1CR_16_1,
+ MSEL1CR_15_0, MSEL1CR_15_1,
+ MSEL1CR_14_0, MSEL1CR_14_1,
+ MSEL1CR_13_0, MSEL1CR_13_1,
+ MSEL1CR_12_0, MSEL1CR_12_1,
+ 0, 0, 0, 0,
+ MSEL1CR_9_0, MSEL1CR_9_1,
+ 0, 0,
+ MSEL1CR_7_0, MSEL1CR_7_1,
+ MSEL1CR_6_0, MSEL1CR_6_1,
+ MSEL1CR_5_0, MSEL1CR_5_1,
+ MSEL1CR_4_0, MSEL1CR_4_1,
+ MSEL1CR_3_0, MSEL1CR_3_1,
+ MSEL1CR_2_0, MSEL1CR_2_1,
+ 0, 0,
+ MSEL1CR_0_0, MSEL1CR_0_1,
+ }
+ },
+ { PINMUX_CFG_REG("MSEL3CR", 0xE6058020, 32, 1) {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ MSEL3CR_15_0, MSEL3CR_15_1,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ MSEL3CR_6_0, MSEL3CR_6_1,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ }
+ },
+ { PINMUX_CFG_REG("MSEL4CR", 0xE6058024, 32, 1) {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ MSEL4CR_19_0, MSEL4CR_19_1,
+ MSEL4CR_18_0, MSEL4CR_18_1,
+ 0, 0, 0, 0,
+ MSEL4CR_15_0, MSEL4CR_15_1,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ MSEL4CR_10_0, MSEL4CR_10_1,
+ 0, 0, 0, 0, 0, 0,
+ MSEL4CR_6_0, MSEL4CR_6_1,
+ 0, 0,
+ MSEL4CR_4_0, MSEL4CR_4_1,
+ 0, 0, 0, 0,
+ MSEL4CR_1_0, MSEL4CR_1_1,
+ 0, 0,
+ }
+ },
+ { PINMUX_CFG_REG("MSEL5CR", 0xE6058028, 32, 1) {
+ MSEL5CR_31_0, MSEL5CR_31_1,
+ MSEL5CR_30_0, MSEL5CR_30_1,
+ MSEL5CR_29_0, MSEL5CR_29_1,
+ 0, 0,
+ MSEL5CR_27_0, MSEL5CR_27_1,
+ 0, 0,
+ MSEL5CR_25_0, MSEL5CR_25_1,
+ 0, 0,
+ MSEL5CR_23_0, MSEL5CR_23_1,
+ 0, 0,
+ MSEL5CR_21_0, MSEL5CR_21_1,
+ 0, 0,
+ MSEL5CR_19_0, MSEL5CR_19_1,
+ 0, 0,
+ MSEL5CR_17_0, MSEL5CR_17_1,
+ 0, 0,
+ MSEL5CR_15_0, MSEL5CR_15_1,
+ MSEL5CR_14_0, MSEL5CR_14_1,
+ MSEL5CR_13_0, MSEL5CR_13_1,
+ MSEL5CR_12_0, MSEL5CR_12_1,
+ MSEL5CR_11_0, MSEL5CR_11_1,
+ MSEL5CR_10_0, MSEL5CR_10_1,
+ 0, 0,
+ MSEL5CR_8_0, MSEL5CR_8_1,
+ MSEL5CR_7_0, MSEL5CR_7_1,
+ MSEL5CR_6_0, MSEL5CR_6_1,
+ MSEL5CR_5_0, MSEL5CR_5_1,
+ MSEL5CR_4_0, MSEL5CR_4_1,
+ MSEL5CR_3_0, MSEL5CR_3_1,
+ MSEL5CR_2_0, MSEL5CR_2_1,
+ 0, 0,
+ MSEL5CR_0_0, MSEL5CR_0_1,
+ }
+ },
+ { },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+ { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054800, 32) {
+ PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+ PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+ PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+ PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+ PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+ PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+ PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+ PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+ },
+ { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054804, 32) {
+ PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+ PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+ PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+ PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+ PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+ PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+ PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+ PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+ },
+ { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054808, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+ PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+ PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+ PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+ PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+ },
+ { PINMUX_DATA_REG("PORTD095_064DR", 0xe6055808, 32) {
+ PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+ PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+ PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0 }
+ },
+ { PINMUX_DATA_REG("PORTD127_096DR", 0xe605580c, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+ PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+ PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+ PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+ PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR127_096DR", 0xe605680C, 32) {
+ PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA,
+ PORT123_DATA, PORT122_DATA, PORT121_DATA, PORT120_DATA,
+ PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+ PORT115_DATA, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0 }
+ },
+ { PINMUX_DATA_REG("PORTR159_128DR", 0xe6056810, 32) {
+ PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+ PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+ PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+ PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+ PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+ PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+ PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+ PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR191_160DR", 0xe6056814, 32) {
+ PORT191_DATA, PORT190_DATA, PORT189_DATA, PORT188_DATA,
+ PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA,
+ PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA,
+ PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA,
+ PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA,
+ PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA,
+ PORT167_DATA, PORT166_DATA, PORT165_DATA, PORT164_DATA,
+ PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056818, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, PORT209_DATA, PORT208_DATA,
+ PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+ PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+ PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+ PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+ },
+ { PINMUX_DATA_REG("PORTU223_192DR", 0xe6057818, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ PORT211_DATA, PORT210_DATA, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0 }
+ },
+ { },
+};
+
+static struct pinmux_info r8a7740_pinmux_info = {
+ .name = "r8a7740_pfc",
+ .reserved_id = PINMUX_RESERVED,
+ .data = { PINMUX_DATA_BEGIN,
+ PINMUX_DATA_END },
+ .input = { PINMUX_INPUT_BEGIN,
+ PINMUX_INPUT_END },
+ .input_pu = { PINMUX_INPUT_PULLUP_BEGIN,
+ PINMUX_INPUT_PULLUP_END },
+ .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN,
+ PINMUX_INPUT_PULLDOWN_END },
+ .output = { PINMUX_OUTPUT_BEGIN,
+ PINMUX_OUTPUT_END },
+ .mark = { PINMUX_MARK_BEGIN,
+ PINMUX_MARK_END },
+ .function = { PINMUX_FUNCTION_BEGIN,
+ PINMUX_FUNCTION_END },
+
+ .first_gpio = GPIO_PORT0,
+ .last_gpio = GPIO_FN_TRACEAUD_FROM_MEMC,
+
+ .gpios = pinmux_gpios,
+ .cfg_regs = pinmux_config_regs,
+ .data_regs = pinmux_data_regs,
+
+ .gpio_data = pinmux_data,
+ .gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void r8a7740_pinmux_init(void)
+{
+ register_pinmux(&r8a7740_pinmux_info);
+}
--
1.7.5.4
^ permalink raw reply related
* [PATCH 13/20] ARM: mach-shmobile: r8a7740: add i2c support
From: Kuninori Morimoto @ 2011-11-11 2:46 UTC (permalink / raw)
To: linux-sh
This patch adds I2C support to r8a7740 CPU
which has lasting errata on I2C I/O pad reset.
This patch is including work-around.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/setup-r8a7740.c | 106 ++++++++++++++++++++++++++++++++
1 files changed, 106 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 5548518..e16860f 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -17,8 +17,10 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/serial_sci.h>
#include <linux/sh_timer.h>
@@ -233,10 +235,114 @@ static struct platform_device *r8a7740_early_devices[] __initdata = {
&cmt10_device,
};
+/* I2C */
+static struct resource i2c0_resources[] = {
+ [0] = {
+ .name = "IIC0",
+ .start = 0xfff20000,
+ .end = 0xfff20425 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(201),
+ .end = gic_spi(204),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource i2c1_resources[] = {
+ [0] = {
+ .name = "IIC1",
+ .start = 0xe6c20000,
+ .end = 0xe6c20425 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(70),
+ .end = gic_spi(73),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device i2c0_device = {
+ .name = "i2c-sh_mobile",
+ .id = 0,
+ .resource = i2c0_resources,
+ .num_resources = ARRAY_SIZE(i2c0_resources),
+};
+
+static struct platform_device i2c1_device = {
+ .name = "i2c-sh_mobile",
+ .id = 1,
+ .resource = i2c1_resources,
+ .num_resources = ARRAY_SIZE(i2c1_resources),
+};
+
+static struct platform_device *r8a7740_late_devices[] __initdata = {
+ &i2c0_device,
+ &i2c1_device,
+};
+
+#define ICCR 0x0004
+#define ICSTART 0x0070
+
+#define i2c_read(reg, offset) ioread8(reg + offset)
+#define i2c_write(reg, offset, data) iowrite8(data, reg + offset)
+
+/*
+ * r8a7740 chip has lasting errata on I2C I/O pad reset.
+ * this is work-around for it.
+ */
+static void r8a7740_i2c_workaround(struct platform_device *pdev)
+{
+ struct resource *res;
+ void __iomem *reg;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!res)) {
+ pr_err("r8a7740 i2c workaround fail (cannot find resource)\n");
+ return;
+ }
+
+ reg = ioremap(res->start, resource_size(res));
+ if (unlikely(!reg)) {
+ pr_err("r8a7740 i2c workaround fail (cannot map IO)\n");
+ return;
+ }
+
+ i2c_write(reg, ICCR, i2c_read(reg, ICCR) | 0x80);
+ i2c_read(reg, ICCR); /* dummy read */
+
+ i2c_write(reg, ICSTART, i2c_read(reg, ICSTART) | 0x10);
+ i2c_read(reg, ICSTART); /* dummy read */
+
+ mdelay(100);
+
+ i2c_write(reg, ICCR, 0x01);
+ i2c_read(reg, ICCR);
+ i2c_write(reg, ICSTART, 0x00);
+ i2c_read(reg, ICSTART);
+
+ i2c_write(reg, ICCR, 0x10);
+ mdelay(100);
+ i2c_write(reg, ICCR, 0x00);
+ mdelay(100);
+ i2c_write(reg, ICCR, 0x10);
+ mdelay(100);
+
+ iounmap(reg);
+}
+
void __init r8a7740_add_standard_devices(void)
{
+ /* I2C work-around */
+ r8a7740_i2c_workaround(&i2c0_device);
+ r8a7740_i2c_workaround(&i2c1_device);
+
platform_add_devices(r8a7740_early_devices,
ARRAY_SIZE(r8a7740_early_devices));
+ platform_add_devices(r8a7740_late_devices,
+ ARRAY_SIZE(r8a7740_late_devices));
}
void __init r8a7740_add_early_devices(void)
--
1.7.5.4
^ permalink raw reply related
* [PATCH 14/20] ARM: mach-shmobile: r8a7740: add INTC support
From: Kuninori Morimoto @ 2011-11-11 2:46 UTC (permalink / raw)
To: linux-sh
R8A7740 GIC can not get external IRQx interrupt directly
without GIC - INTC demux support.
Current AG5 is using GIC - INTCS demux with
special irq relocation. but GIC - INTCA demux
is still not supported and it needs irq number re-mapping.
OTOH, normal INTC support as before is very enough for R8A7740,
because it is not SMP CPU.
This patch adds INTCA/INTCS support instead of GIC.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/Kconfig | 1 -
arch/arm/mach-shmobile/Makefile | 2 +-
arch/arm/mach-shmobile/intc-r8a7740.c | 612 +++++++++++++++++++++++++++++++-
arch/arm/mach-shmobile/setup-r8a7740.c | 28 +-
4 files changed, 614 insertions(+), 29 deletions(-)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 329a3cb..aa63c96 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -33,7 +33,6 @@ config ARCH_R8A7740
select CPU_V7
select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_GIC
comment "SH-Mobile Board Type"
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 2bd2d3b..971f703 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -31,7 +31,7 @@ obj-$(CONFIG_ARCH_SH7367) += entry-intc.o
obj-$(CONFIG_ARCH_SH7377) += entry-intc.o
obj-$(CONFIG_ARCH_SH7372) += entry-intc.o
obj-$(CONFIG_ARCH_SH73A0) += entry-gic.o
-obj-$(CONFIG_ARCH_R8A7740) += entry-gic.o
+obj-$(CONFIG_ARCH_R8A7740) += entry-intc.o
# PM objects
obj-$(CONFIG_SUSPEND) += suspend.o
diff --git a/arch/arm/mach-shmobile/intc-r8a7740.c b/arch/arm/mach-shmobile/intc-r8a7740.c
index c62a205..272c84c 100644
--- a/arch/arm/mach-shmobile/intc-r8a7740.c
+++ b/arch/arm/mach-shmobile/intc-r8a7740.c
@@ -18,28 +18,614 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/hardware/gic.h>
+#include <linux/sh_intc.h>
+#include <mach/intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
-#define INTA_CTRL 0xe605807c
+/*
+ * INTCA
+ */
+enum {
+ UNUSED_INTCA = 0,
+
+ /* interrupt sources INTCA */
+ DIRC,
+ ATAPI,
+ IIC1_ALI, IIC1_TACKI, IIC1_WAITI, IIC1_DTEI,
+ AP_ARM_COMMTX, AP_ARM_COMMRX,
+ MFI, MFIS,
+ BBIF1, BBIF2,
+ USBHSDMAC,
+ USBF_OUL_SOF, USBF_IXL_INT,
+ SGX540,
+ CMT1_0, CMT1_1, CMT1_2, CMT1_3,
+ CMT2,
+ CMT3,
+ KEYSC,
+ SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+ MSIOF2, MSIOF1,
+ SCIFA4, SCIFA5, SCIFB,
+ FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+ SDHI0_0, SDHI0_1, SDHI0_2, SDHI0_3,
+ SDHI1_0, SDHI1_1, SDHI1_2, SDHI1_3,
+ AP_ARM_L2CINT,
+ IRDA,
+ TPU0,
+ SCIFA6, SCIFA7,
+ GbEther,
+ ICBS0,
+ DDM,
+ SDHI2_0, SDHI2_1, SDHI2_2, SDHI2_3,
+ RWDT0,
+ DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3,
+ DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR,
+ DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+ DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+ DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+ DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+ SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
+ USBH_INT, USBH_OHCI, USBH_EHCI, USBH_PME, USBH_BIND,
+ RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF,
+ SPU2_0, SPU2_1,
+ FSI, FMSI,
+ IPMMU,
+ AP_ARM_CTIIRQ, AP_ARM_PMURQ,
+ MFIS2,
+ CPORTR2S,
+ CMT14, CMT15,
+ MMCIF_0, MMCIF_1, MMCIF_2,
+ SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
+ STPRO_0, STPRO_1, STPRO_2, STPRO_3, STPRO_4,
+
+ /* interrupt groups INTCA */
+ DMAC1_1, DMAC1_2,
+ DMAC2_1, DMAC2_2,
+ DMAC3_1, DMAC3_2,
+ AP_ARM1, AP_ARM2,
+ SDHI0, SDHI1, SDHI2,
+ SHWYSTAT,
+ USBF, USBH1, USBH2,
+ RSPI, SPU2, FLCTL, IIC1,
+};
+
+static struct intc_vect intca_vectors[] __initdata = {
+ INTC_VECT(DIRC, 0x0560),
+ INTC_VECT(ATAPI, 0x05E0),
+ INTC_VECT(IIC1_ALI, 0x0780),
+ INTC_VECT(IIC1_TACKI, 0x07A0),
+ INTC_VECT(IIC1_WAITI, 0x07C0),
+ INTC_VECT(IIC1_DTEI, 0x07E0),
+ INTC_VECT(AP_ARM_COMMTX, 0x0840),
+ INTC_VECT(AP_ARM_COMMRX, 0x0860),
+ INTC_VECT(MFI, 0x0900),
+ INTC_VECT(MFIS, 0x0920),
+ INTC_VECT(BBIF1, 0x0940),
+ INTC_VECT(BBIF2, 0x0960),
+ INTC_VECT(USBHSDMAC, 0x0A00),
+ INTC_VECT(USBF_OUL_SOF, 0x0A20),
+ INTC_VECT(USBF_IXL_INT, 0x0A40),
+ INTC_VECT(SGX540, 0x0A60),
+ INTC_VECT(CMT1_0, 0x0B00),
+ INTC_VECT(CMT1_1, 0x0B20),
+ INTC_VECT(CMT1_2, 0x0B40),
+ INTC_VECT(CMT1_3, 0x0B60),
+ INTC_VECT(CMT2, 0x0B80),
+ INTC_VECT(CMT3, 0x0BA0),
+ INTC_VECT(KEYSC, 0x0BE0),
+ INTC_VECT(SCIFA0, 0x0C00),
+ INTC_VECT(SCIFA1, 0x0C20),
+ INTC_VECT(SCIFA2, 0x0C40),
+ INTC_VECT(SCIFA3, 0x0C60),
+ INTC_VECT(MSIOF2, 0x0C80),
+ INTC_VECT(MSIOF1, 0x0D00),
+ INTC_VECT(SCIFA4, 0x0D20),
+ INTC_VECT(SCIFA5, 0x0D40),
+ INTC_VECT(SCIFB, 0x0D60),
+ INTC_VECT(FLCTL_FLSTEI, 0x0D80),
+ INTC_VECT(FLCTL_FLTENDI, 0x0DA0),
+ INTC_VECT(FLCTL_FLTREQ0I, 0x0DC0),
+ INTC_VECT(FLCTL_FLTREQ1I, 0x0DE0),
+ INTC_VECT(SDHI0_0, 0x0E00),
+ INTC_VECT(SDHI0_1, 0x0E20),
+ INTC_VECT(SDHI0_2, 0x0E40),
+ INTC_VECT(SDHI0_3, 0x0E60),
+ INTC_VECT(SDHI1_0, 0x0E80),
+ INTC_VECT(SDHI1_1, 0x0EA0),
+ INTC_VECT(SDHI1_2, 0x0EC0),
+ INTC_VECT(SDHI1_3, 0x0EE0),
+ INTC_VECT(AP_ARM_L2CINT, 0x0FA0),
+ INTC_VECT(IRDA, 0x0480),
+ INTC_VECT(TPU0, 0x04A0),
+ INTC_VECT(SCIFA6, 0x04C0),
+ INTC_VECT(SCIFA7, 0x04E0),
+ INTC_VECT(GbEther, 0x0500),
+ INTC_VECT(ICBS0, 0x0540),
+ INTC_VECT(DDM, 0x1140),
+ INTC_VECT(SDHI2_0, 0x1200),
+ INTC_VECT(SDHI2_1, 0x1220),
+ INTC_VECT(SDHI2_2, 0x1240),
+ INTC_VECT(SDHI2_3, 0x1260),
+ INTC_VECT(RWDT0, 0x1280),
+ INTC_VECT(DMAC1_1_DEI0, 0x2000),
+ INTC_VECT(DMAC1_1_DEI1, 0x2020),
+ INTC_VECT(DMAC1_1_DEI2, 0x2040),
+ INTC_VECT(DMAC1_1_DEI3, 0x2060),
+ INTC_VECT(DMAC1_2_DEI4, 0x2080),
+ INTC_VECT(DMAC1_2_DEI5, 0x20A0),
+ INTC_VECT(DMAC1_2_DADERR, 0x20C0),
+ INTC_VECT(DMAC2_1_DEI0, 0x2100),
+ INTC_VECT(DMAC2_1_DEI1, 0x2120),
+ INTC_VECT(DMAC2_1_DEI2, 0x2140),
+ INTC_VECT(DMAC2_1_DEI3, 0x2160),
+ INTC_VECT(DMAC2_2_DEI4, 0x2180),
+ INTC_VECT(DMAC2_2_DEI5, 0x21A0),
+ INTC_VECT(DMAC2_2_DADERR, 0x21C0),
+ INTC_VECT(DMAC3_1_DEI0, 0x2200),
+ INTC_VECT(DMAC3_1_DEI1, 0x2220),
+ INTC_VECT(DMAC3_1_DEI2, 0x2240),
+ INTC_VECT(DMAC3_1_DEI3, 0x2260),
+ INTC_VECT(DMAC3_2_DEI4, 0x2280),
+ INTC_VECT(DMAC3_2_DEI5, 0x22A0),
+ INTC_VECT(DMAC3_2_DADERR, 0x22C0),
+ INTC_VECT(SHWYSTAT_RT, 0x1300),
+ INTC_VECT(SHWYSTAT_HS, 0x1320),
+ INTC_VECT(SHWYSTAT_COM, 0x1340),
+ INTC_VECT(USBH_INT, 0x1540),
+ INTC_VECT(USBH_OHCI, 0x1560),
+ INTC_VECT(USBH_EHCI, 0x1580),
+ INTC_VECT(USBH_PME, 0x15A0),
+ INTC_VECT(USBH_BIND, 0x15C0),
+ INTC_VECT(RSPI_OVRF, 0x1780),
+ INTC_VECT(RSPI_SPTEF, 0x17A0),
+ INTC_VECT(RSPI_SPRF, 0x17C0),
+ INTC_VECT(SPU2_0, 0x1800),
+ INTC_VECT(SPU2_1, 0x1820),
+ INTC_VECT(FSI, 0x1840),
+ INTC_VECT(FMSI, 0x1860),
+ INTC_VECT(IPMMU, 0x1920),
+ INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
+ INTC_VECT(AP_ARM_PMURQ, 0x19A0),
+ INTC_VECT(MFIS2, 0x1A00),
+ INTC_VECT(CPORTR2S, 0x1A20),
+ INTC_VECT(CMT14, 0x1A40),
+ INTC_VECT(CMT15, 0x1A60),
+ INTC_VECT(MMCIF_0, 0x1AA0),
+ INTC_VECT(MMCIF_1, 0x1AC0),
+ INTC_VECT(MMCIF_2, 0x1AE0),
+ INTC_VECT(SIM_ERI, 0x1C00),
+ INTC_VECT(SIM_RXI, 0x1C20),
+ INTC_VECT(SIM_TXI, 0x1C40),
+ INTC_VECT(SIM_TEI, 0x1C60),
+ INTC_VECT(STPRO_0, 0x1C80),
+ INTC_VECT(STPRO_1, 0x1CA0),
+ INTC_VECT(STPRO_2, 0x1CC0),
+ INTC_VECT(STPRO_3, 0x1CE0),
+ INTC_VECT(STPRO_4, 0x1D00),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+ INTC_GROUP(DMAC1_1,
+ DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3),
+ INTC_GROUP(DMAC1_2,
+ DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR),
+ INTC_GROUP(DMAC2_1,
+ DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+ INTC_GROUP(DMAC2_2,
+ DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR),
+ INTC_GROUP(DMAC3_1,
+ DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+ INTC_GROUP(DMAC3_2,
+ DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR),
+ INTC_GROUP(AP_ARM1,
+ AP_ARM_COMMTX, AP_ARM_COMMRX),
+ INTC_GROUP(AP_ARM2,
+ AP_ARM_CTIIRQ, AP_ARM_PMURQ),
+ INTC_GROUP(USBF,
+ USBF_OUL_SOF, USBF_IXL_INT),
+ INTC_GROUP(SDHI0,
+ SDHI0_0, SDHI0_1, SDHI0_2, SDHI0_3),
+ INTC_GROUP(SDHI1,
+ SDHI1_0, SDHI1_1, SDHI1_2, SDHI1_3),
+ INTC_GROUP(SDHI2,
+ SDHI2_0, SDHI2_1, SDHI2_2, SDHI2_3),
+ INTC_GROUP(SHWYSTAT,
+ SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
+ INTC_GROUP(USBH1, /* FIXME */
+ USBH_INT, USBH_OHCI),
+ INTC_GROUP(USBH2, /* FIXME */
+ USBH_EHCI,
+ USBH_PME, USBH_BIND),
+ INTC_GROUP(RSPI,
+ RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF),
+ INTC_GROUP(SPU2,
+ SPU2_0, SPU2_1),
+ INTC_GROUP(FLCTL,
+ FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+ INTC_GROUP(IIC1,
+ IIC1_ALI, IIC1_TACKI, IIC1_WAITI, IIC1_DTEI),
+};
+
+static struct intc_mask_reg intca_mask_registers[] __initdata = {
+ { /* IMR0A / IMCR0A */ 0xe6940080, 0xe69400c0, 8,
+ { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+ 0, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
+ { /* IMR1A / IMCR1A */ 0xe6940084, 0xe69400c4, 8,
+ { ATAPI, 0, DIRC, 0,
+ DMAC1_1_DEI3, DMAC1_1_DEI2, DMAC1_1_DEI1, DMAC1_1_DEI0 } },
+ { /* IMR2A / IMCR2A */ 0xe6940088, 0xe69400c8, 8,
+ { 0, 0, 0, 0,
+ BBIF1, BBIF2, MFIS, MFI } },
+ { /* IMR3A / IMCR3A */ 0xe694008c, 0xe69400cc, 8,
+ { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+ DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+ { /* IMR4A / IMCR4A */ 0xe6940090, 0xe69400d0, 8,
+ { DDM, 0, 0, 0,
+ 0, 0, 0, 0 } },
+ { /* IMR5A / IMCR5A */ 0xe6940094, 0xe69400d4, 8,
+ { KEYSC, DMAC1_2_DADERR, DMAC1_2_DEI5, DMAC1_2_DEI4,
+ SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+ { /* IMR6A / IMCR6A */ 0xe6940098, 0xe69400d8, 8,
+ { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+ 0, 0, MSIOF2, 0 } },
+ { /* IMR7A / IMCR7A */ 0xe694009c, 0xe69400dc, 8,
+ { SDHI0_3, SDHI0_2, SDHI0_1, SDHI0_0,
+ FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+ { /* IMR8A / IMCR8A */ 0xe69400a0, 0xe69400e0, 8,
+ { SDHI1_3, SDHI1_2, SDHI1_1, SDHI1_0,
+ 0, USBHSDMAC, 0, AP_ARM_L2CINT } },
+ { /* IMR9A / IMCR9A */ 0xe69400a4, 0xe69400e4, 8,
+ { CMT1_3, CMT1_2, CMT1_1, CMT1_0,
+ CMT2, USBF_IXL_INT, USBF_OUL_SOF, SGX540 } },
+ { /* IMR10A / IMCR10A */ 0xe69400a8, 0xe69400e8, 8,
+ { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+ 0, 0, 0, 0 } },
+ { /* IMR11A / IMCR11A */ 0xe69400ac, 0xe69400ec, 8,
+ { IIC1_DTEI, IIC1_WAITI, IIC1_TACKI, IIC1_ALI,
+ ICBS0, 0, 0, 0 } },
+ { /* IMR12A / IMCR12A */ 0xe69400b0, 0xe69400f0, 8,
+ { 0, 0, TPU0, SCIFA6,
+ SCIFA7, GbEther, 0, 0 } },
+ { /* IMR13A / IMCR13A */ 0xe69400b4, 0xe69400f4, 8,
+ { SDHI2_3, SDHI2_2, SDHI2_1, SDHI2_0,
+ 0, CMT3, 0, RWDT0 } },
+ { /* IMR0A3 / IMCR0A3 */ 0xe6950080, 0xe69500c0, 8,
+ { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
+ 0, 0, 0, 0 } },
+ /* IMR1A3 / IMCR1A3 */
+ { /* IMR2A3 / IMCR2A3 */ 0xe6950088, 0xe69500c8, 8,
+ { 0, 0, USBH_INT, USBH_OHCI,
+ USBH_EHCI, USBH_PME, USBH_BIND, 0 } },
+ /* IMR3A3 / IMCR3A3 */
+ { /* IMR4A3 / IMCR4A3 */ 0xe6950090, 0xe69500d0, 8,
+ { 0, 0, 0, 0,
+ RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF, 0 } },
+ { /* IMR5A3 / IMCR5A3 */ 0xe6950094, 0xe69500d4, 8,
+ { SPU2_0, SPU2_1, FSI, FMSI,
+ 0, 0, 0, 0 } },
+ { /* IMR6A3 / IMCR6A3 */ 0xe6950098, 0xe69500d8, 8,
+ { 0, IPMMU, 0, 0,
+ AP_ARM_CTIIRQ, AP_ARM_PMURQ, 0, 0 } },
+ { /* IMR7A3 / IMCR7A3 */ 0xe695009c, 0xe69500dc, 8,
+ { MFIS2, CPORTR2S, CMT14, CMT15,
+ 0, MMCIF_0, MMCIF_1, MMCIF_2 } },
+ /* IMR8A3 / IMCR8A3 */
+ { /* IMR9A3 / IMCR9A3 */ 0xe69500a4, 0xe69500e4, 8,
+ { SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
+ STPRO_0, STPRO_1, STPRO_2, STPRO_3 } },
+ { /* IMR10A3 / IMCR10A3 */ 0xe69500a8, 0xe69500e8, 8,
+ { STPRO_4, 0, 0, 0,
+ 0, 0, 0, 0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] __initdata = {
+ { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, ICBS0 } },
+ { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
+ { 0xe6940008, 0, 16, 4, /* IPRCA */ { ATAPI, 0, CMT1_1, AP_ARM1 } },
+ { 0xe694000c, 0, 16, 4, /* IPRDA */ { 0, 0, CMT1_2, 0 } },
+ { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC1_1, MFIS, MFI, USBF } },
+ { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC, DMAC1_2,
+ SGX540, CMT1_0 } },
+ { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+ SCIFA2, SCIFA3 } },
+ { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBHSDMAC,
+ FLCTL, SDHI0 } },
+ { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, 0, IIC1 } },
+ { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2,
+ AP_ARM_L2CINT, 0 } },
+ { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_3, 0, SDHI1 } },
+ { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, SCIFA6,
+ SCIFA7, GbEther } },
+ { 0xe6940030, 0, 16, 4, /* IPRMA */ { 0, CMT3, 0, RWDT0 } },
+ { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
+ { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
+ { 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
+ /* IPRBA3 */
+ /* IPRCA3 */
+ /* IPRDA3 */
+ { 0xe6950010, 0, 16, 4, /* IPREA3 */ { USBH1, 0, 0, 0 } },
+ { 0xe6950014, 0, 16, 4, /* IPRFA3 */ { USBH2, 0, 0, 0 } },
+ /* IPRGA3 */
+ /* IPRHA3 */
+ /* IPRIA3 */
+ { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { RSPI, 0, 0, 0 } },
+ { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
+ /* IPRLA3 */
+ { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU, 0, 0, 0 } },
+ { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
+ { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
+ CMT14, CMT15 } },
+ { 0xe695003c, 0, 16, 4, /* IPRPA3 */ { 0, MMCIF_0, MMCIF_1, MMCIF_2 } },
+ /* IPRQA3 */
+ /* IPRRA3 */
+ { 0xe6950048, 0, 16, 4, /* IPRSA3 */ { SIM_ERI, SIM_RXI,
+ SIM_TXI, SIM_TEI } },
+ { 0xe695004c, 0, 16, 4, /* IPRTA3 */ { STPRO_0, STPRO_1,
+ STPRO_2, STPRO_3 } },
+ { 0xe6950050, 0, 16, 4, /* IPRUA3 */ { STPRO_4, 0, 0, 0 } },
+};
+
+static DECLARE_INTC_DESC(intca_desc, "r8a7740-intca",
+ intca_vectors, intca_groups,
+ intca_mask_registers, intca_prio_registers,
+ NULL);
+
+INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
+ INTC_VECT, "r8a7740-intca-irq-pins");
+
+
+/*
+ * INTCS
+ */
+enum {
+ UNUSED_INTCS = 0,
+
+ INTCS,
+
+ /* interrupt sources INTCS */
+
+ /* HUDI */
+ /* STPRO */
+ /* RTDMAC(1) */
+ VPU5HA2,
+ _2DG_TRAP, _2DG_GPM_INT, _2DG_CER_INT,
+ /* MFI */
+ /* BBIF2 */
+ VPU5F,
+ _2DG_BRK_INT,
+ /* SGX540 */
+ /* 2DDMAC */
+ /* IPMMU */
+ /* RTDMAC 2 */
+ /* KEYSC */
+ /* MSIOF */
+ IIC0_ALI, IIC0_TACKI, IIC0_WAITI, IIC0_DTEI,
+ TMU0_0, TMU0_1, TMU0_2,
+ CMT0,
+ /* CMT2 */
+ LMB,
+ CTI,
+ VOU,
+ /* RWDT0 */
+ ICB,
+ VIO6C,
+ CEU20, CEU21,
+ JPU,
+ LCDC0,
+ LCRC,
+ /* RTDMAC2(1) */
+ /* RTDMAC2(2) */
+ LCDC1,
+ /* SPU2 */
+ /* FSI */
+ /* FMSI */
+ TMU1_0, TMU1_1, TMU1_2,
+ CMT4,
+ DISP,
+ DSRV,
+ /* MFIS2 */
+ CPORTS2R,
+
+ /* interrupt groups INTCS */
+ _2DG1,
+ IIC0, TMU1,
+};
+
+static struct intc_vect intcs_vectors[] = {
+ /* HUDI */
+ /* STPRO */
+ /* RTDMAC(1) */
+ INTCS_VECT(VPU5HA2, 0x0880),
+ INTCS_VECT(_2DG_TRAP, 0x08A0),
+ INTCS_VECT(_2DG_GPM_INT, 0x08C0),
+ INTCS_VECT(_2DG_CER_INT, 0x08E0),
+ /* MFI */
+ /* BBIF2 */
+ INTCS_VECT(VPU5F, 0x0980),
+ INTCS_VECT(_2DG_BRK_INT, 0x09A0),
+ /* SGX540 */
+ /* 2DDMAC */
+ /* IPMMU */
+ /* RTDMAC(2) */
+ /* KEYSC */
+ /* MSIOF */
+ INTCS_VECT(IIC0_ALI, 0x0E00),
+ INTCS_VECT(IIC0_TACKI, 0x0E20),
+ INTCS_VECT(IIC0_WAITI, 0x0E40),
+ INTCS_VECT(IIC0_DTEI, 0x0E60),
+ INTCS_VECT(TMU0_0, 0x0E80),
+ INTCS_VECT(TMU0_1, 0x0EA0),
+ INTCS_VECT(TMU0_2, 0x0EC0),
+ INTCS_VECT(CMT0, 0x0F00),
+ /* CMT2 */
+ INTCS_VECT(LMB, 0x0F60),
+ INTCS_VECT(CTI, 0x0400),
+ INTCS_VECT(VOU, 0x0420),
+ /* RWDT0 */
+ INTCS_VECT(ICB, 0x0480),
+ INTCS_VECT(VIO6C, 0x04E0),
+ INTCS_VECT(CEU20, 0x0500),
+ INTCS_VECT(CEU21, 0x0520),
+ INTCS_VECT(JPU, 0x0560),
+ INTCS_VECT(LCDC0, 0x0580),
+ INTCS_VECT(LCRC, 0x05A0),
+ /* RTDMAC2(1) */
+ /* RTDMAC2(2) */
+ INTCS_VECT(LCDC1, 0x1780),
+ /* SPU2 */
+ /* FSI */
+ /* FMSI */
+ INTCS_VECT(TMU1_0, 0x1900),
+ INTCS_VECT(TMU1_1, 0x1920),
+ INTCS_VECT(TMU1_2, 0x1940),
+ INTCS_VECT(CMT4, 0x1980),
+ INTCS_VECT(DISP, 0x19A0),
+ INTCS_VECT(DSRV, 0x19C0),
+ /* MFIS2 */
+ INTCS_VECT(CPORTS2R, 0x1A20),
+
+ INTC_VECT(INTCS, 0xf80),
+};
-static int r8a7740_set_wake(struct irq_data *data, unsigned int on)
+static struct intc_group intcs_groups[] __initdata = {
+ INTC_GROUP(_2DG1, /*FIXME*/
+ _2DG_CER_INT, _2DG_GPM_INT, _2DG_TRAP),
+ INTC_GROUP(IIC0,
+ IIC0_DTEI, IIC0_WAITI, IIC0_TACKI, IIC0_ALI),
+ INTC_GROUP(TMU1,
+ TMU1_0, TMU1_1, TMU1_2),
+};
+
+static struct intc_mask_reg intcs_mask_registers[] = {
+ /* IMR0SA / IMCR0SA */ /* all 0 */
+ { /* IMR1SA / IMCR1SA */ 0xffd20184, 0xffd201c4, 8,
+ { _2DG_CER_INT, _2DG_GPM_INT, _2DG_TRAP, VPU5HA2,
+ 0, 0, 0, 0 /*STPRO*/ } },
+ { /* IMR2SA / IMCR2SA */ 0xffd20188, 0xffd201c8, 8,
+ { 0/*STPRO*/, 0, CEU21, VPU5F,
+ 0/*BBIF2*/, 0, 0, 0/*MFI*/ } },
+ { /* IMR3SA / IMCR3SA */ 0xffd2018c, 0xffd201cc, 8,
+ { 0, 0, 0, 0, /*2DDMAC*/
+ VIO6C, 0, 0, ICB } },
+ { /* IMR4SA / IMCR4SA */ 0xffd20190, 0xffd201d0, 8,
+ { 0, 0, VOU, CTI,
+ JPU, 0, LCRC, LCDC0 } },
+ /* IMR5SA / IMCR5SA */ /*KEYSC/RTDMAC2/RTDMAC1*/
+ /* IMR6SA / IMCR6SA */ /*MSIOF/SGX540*/
+ { /* IMR7SA / IMCR7SA */ 0xffd2019c, 0xffd201dc, 8,
+ { 0, TMU0_2, TMU0_1, TMU0_0,
+ 0, 0, 0, 0 } },
+ { /* IMR8SA / IMCR8SA */ 0xffd201a0, 0xffd201e0, 8,
+ { 0, 0, 0, 0,
+ CEU20, 0, 0, 0 } },
+ { /* IMR9SA / IMCR9SA */ 0xffd201a4, 0xffd201e4, 8,
+ { 0, 0/*RWDT0*/, 0/*CMT2*/, CMT0,
+ 0, 0, 0, 0 } },
+ /* IMR10SA / IMCR10SA */ /*IPMMU*/
+ { /* IMR11SA / IMCR11SA */ 0xffd201ac, 0xffd201ec, 8,
+ { IIC0_DTEI, IIC0_WAITI, IIC0_TACKI, IIC0_ALI,
+ 0, _2DG_BRK_INT, LMB, 0 } },
+ /* IMR12SA / IMCR12SA */
+ /* IMR13SA / IMCR13SA */
+ /* IMR0SA3 / IMCR0SA3 */ /*RTDMAC2(1)/RTDMAC2(2)*/
+ /* IMR1SA3 / IMCR1SA3 */
+ /* IMR2SA3 / IMCR2SA3 */
+ /* IMR3SA3 / IMCR3SA3 */
+ { /* IMR4SA3 / IMCR4SA3 */ 0xffd50190, 0xffd501d0, 8,
+ { 0, 0, 0, 0,
+ LCDC1, 0, 0, 0 } },
+ /* IMR5SA3 / IMCR5SA3 */ /* SPU2/FSI/FMSI */
+ { /* IMR6SA3 / IMCR6SA3 */ 0xffd50198, 0xffd501d8, 8,
+ { TMU1_0, TMU1_1, TMU1_2, 0,
+ CMT4, DISP, DSRV, 0 } },
+ { /* IMR7SA3 / IMCR7SA3 */ 0xffd5019c, 0xffd501dc, 8,
+ { 0/*MFIS2*/, CPORTS2R, 0, 0,
+ 0, 0, 0, 0 } },
+ { /* INTAMASK */ 0xffd20104, 0, 16,
+ { 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, INTCS } },
+};
+
+/* Priority is needed for INTCA to receive the INTCS interrupt */
+static struct intc_prio_reg intcs_prio_registers[] = {
+ { 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, VOU, 0/*2DDMAC*/, ICB } },
+ { 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU, LCDC0, 0, LCRC } },
+ /* IPRCS */ /*BBIF2*/
+ /* IPRDS */
+ { 0xffd20010, 0, 16, 4, /* IPRES */ { 0/*RTDMAC(1)*/, VPU5HA2,
+ 0/*MFI*/, VPU5F } },
+ { 0xffd20014, 0, 16, 4, /* IPRFS */ { 0/*KEYSC*/, 0/*RTDMAC(2)*/,
+ 0/*CMT2*/, CMT0 } },
+ { 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU0_0, TMU0_1,
+ TMU0_2, _2DG1 } },
+ { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0/*STPRO*/, 0/*STPRO*/,
+ _2DG_BRK_INT/*FIXME*/ } },
+ { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, 0/*MSIOF*/, 0, IIC0 } },
+ { 0xffd20024, 0, 16, 4, /* IPRJS */ { CEU20, 0/*SGX540*/, 0, 0 } },
+ { 0xffd20028, 0, 16, 4, /* IPRKS */ { VIO6C, 0, LMB, 0 } },
+ { 0xffd2002c, 0, 16, 4, /* IPRLS */ { 0/*IPMMU*/, 0, CEU21, 0 } },
+ /* IPRMS */ /*RWDT0*/
+ /* IPRAS3 */ /*RTDMAC2(1)*/
+ /* IPRBS3 */ /*RTDMAC2(2)*/
+ /* IPRCS3 */
+ /* IPRDS3 */
+ /* IPRES3 */
+ /* IPRFS3 */
+ /* IPRGS3 */
+ /* IPRHS3 */
+ /* IPRIS3 */
+ { 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, 0, 0, 0 } },
+ /* IPRKS3 */ /*SPU2/FSI/FMSi*/
+ /* IPRLS3 */
+ { 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } },
+ { 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DISP, DSRV, 0 } },
+ { 0xffd50038, 0, 16, 4, /* IPROS3 */ { 0/*MFIS2*/, CPORTS2R, 0, 0 } },
+ /* IPRPS3 */
+};
+
+static struct resource intcs_resources[] __initdata = {
+ [0] = {
+ .start = 0xffd20000,
+ .end = 0xffd201ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0xffd50000,
+ .end = 0xffd501ff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct intc_desc intcs_desc __initdata = {
+ .name = "r8a7740-intcs",
+ .resource = intcs_resources,
+ .num_resources = ARRAY_SIZE(intcs_resources),
+ .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
+ intcs_prio_registers, NULL, NULL),
+};
+
+static void intcs_demux(unsigned int irq, struct irq_desc *desc)
{
- return 0; /* always allow wakeup */
+ void __iomem *reg = (void *)irq_get_handler_data(irq);
+ unsigned int evtcodeas = ioread32(reg);
+
+ generic_handle_irq(intcs_evt2irq(evtcodeas));
}
void __init r8a7740_init_irq(void)
{
- void __iomem *gic_dist_base = __io(0xf0001000);
- void __iomem *gic_cpu_base = __io(0xf0000000);
+ void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
- /*
- * Change INT_SEL INTCA->GIC
- * (on GPIO)
- */
- __raw_writel(__raw_readl(INTA_CTRL) & ~(1 << 1), INTA_CTRL);
+ register_intc_controller(&intca_desc);
+ register_intc_controller(&intca_irq_pins_desc);
+ register_intc_controller(&intcs_desc);
- gic_init(0, 29, gic_dist_base, gic_cpu_base);
- gic_arch_extn.irq_set_wake = r8a7740_set_wake;
+ /* demux using INTEVTSA */
+ irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa);
+ irq_set_chained_handler(evt2irq(0xf80), intcs_demux);
}
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index e16860f..986dca6 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -35,7 +35,7 @@ static struct plat_sci_port scif0_platform_data = {
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
.type = PORT_SCIFA,
- .irqs = SCIx_IRQ_MUXED(gic_spi(100)),
+ .irqs = SCIx_IRQ_MUXED(evt2irq(0x0c00)),
};
static struct platform_device scif0_device = {
@@ -53,7 +53,7 @@ static struct plat_sci_port scif1_platform_data = {
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
.type = PORT_SCIFA,
- .irqs = SCIx_IRQ_MUXED(gic_spi(101)),
+ .irqs = SCIx_IRQ_MUXED(evt2irq(0x0c20)),
};
static struct platform_device scif1_device = {
@@ -71,7 +71,7 @@ static struct plat_sci_port scif2_platform_data = {
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
.type = PORT_SCIFA,
- .irqs = SCIx_IRQ_MUXED(gic_spi(102)),
+ .irqs = SCIx_IRQ_MUXED(evt2irq(0x0c40)),
};
static struct platform_device scif2_device = {
@@ -89,7 +89,7 @@ static struct plat_sci_port scif3_platform_data = {
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
.type = PORT_SCIFA,
- .irqs = SCIx_IRQ_MUXED(gic_spi(103)),
+ .irqs = SCIx_IRQ_MUXED(evt2irq(0x0c60)),
};
static struct platform_device scif3_device = {
@@ -107,7 +107,7 @@ static struct plat_sci_port scif4_platform_data = {
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
.type = PORT_SCIFA,
- .irqs = SCIx_IRQ_MUXED(gic_spi(104)),
+ .irqs = SCIx_IRQ_MUXED(evt2irq(0x0d20)),
};
static struct platform_device scif4_device = {
@@ -125,7 +125,7 @@ static struct plat_sci_port scif5_platform_data = {
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
.type = PORT_SCIFA,
- .irqs = SCIx_IRQ_MUXED(gic_spi(105)),
+ .irqs = SCIx_IRQ_MUXED(evt2irq(0x0d40)),
};
static struct platform_device scif5_device = {
@@ -143,7 +143,7 @@ static struct plat_sci_port scif6_platform_data = {
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
.type = PORT_SCIFA,
- .irqs = SCIx_IRQ_MUXED(gic_spi(106)),
+ .irqs = SCIx_IRQ_MUXED(evt2irq(0x04c0)),
};
static struct platform_device scif6_device = {
@@ -161,7 +161,7 @@ static struct plat_sci_port scif7_platform_data = {
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
.type = PORT_SCIFA,
- .irqs = SCIx_IRQ_MUXED(gic_spi(107)),
+ .irqs = SCIx_IRQ_MUXED(evt2irq(0x04e0)),
};
static struct platform_device scif7_device = {
@@ -179,7 +179,7 @@ static struct plat_sci_port scifb_platform_data = {
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
.type = PORT_SCIFB,
- .irqs = SCIx_IRQ_MUXED(gic_spi(108)),
+ .irqs = SCIx_IRQ_MUXED(evt2irq(0x0d60)),
};
static struct platform_device scifb_device = {
@@ -207,7 +207,7 @@ static struct resource cmt10_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gic_spi(58),
+ .start = evt2irq(0x0b00),
.flags = IORESOURCE_IRQ,
},
};
@@ -244,8 +244,8 @@ static struct resource i2c0_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gic_spi(201),
- .end = gic_spi(204),
+ .start = intcs_evt2irq(0xe00),
+ .end = intcs_evt2irq(0xe60),
.flags = IORESOURCE_IRQ,
},
};
@@ -258,8 +258,8 @@ static struct resource i2c1_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gic_spi(70),
- .end = gic_spi(73),
+ .start = evt2irq(0x780), /* IIC1_ALI1 */
+ .end = evt2irq(0x7e0), /* IIC1_DTEI1 */
.flags = IORESOURCE_IRQ,
},
};
--
1.7.5.4
^ permalink raw reply related
* [PATCH 15/20] ARM: mach-shmobile: add bonito board support.
From: Kuninori Morimoto @ 2011-11-11 2:46 UTC (permalink / raw)
To: linux-sh
This adds basic bonito board (R-Mobile A1) support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/configs/bonito_defconfig | 72 +++++++++++++
arch/arm/mach-shmobile/Kconfig | 9 ++-
arch/arm/mach-shmobile/Makefile | 1 +
arch/arm/mach-shmobile/board-bonito.c | 187 +++++++++++++++++++++++++++++++++
4 files changed, 267 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/configs/bonito_defconfig
create mode 100644 arch/arm/mach-shmobile/board-bonito.c
diff --git a/arch/arm/configs/bonito_defconfig b/arch/arm/configs/bonito_defconfig
new file mode 100644
index 0000000..635bd69
--- /dev/null
+++ b/arch/arm/configs/bonito_defconfig
@@ -0,0 +1,72 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT\x16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="/your/initramfs/"
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_R8A7740=y
+CONFIG_MACH_BONITO=y
+# CONFIG_SH_TIMER_TMU is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_FORCE_MAX_ZONEORDER\x12
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC5,115200 earlyprintk=sh-sci.5,115200 ignore_loglevel"
+CONFIG_KEXEC=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_BLOCK2MTD=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=9
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_SH_MOBILE=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=y
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ARM_UNWIND is not set
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index aa63c96..ef0077e8 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -81,6 +81,11 @@ config MACH_KOTA2
select ARCH_REQUIRE_GPIOLIB
depends on ARCH_SH73A0
+config MACH_BONITO
+ bool "bonito board"
+ select ARCH_REQUIRE_GPIOLIB
+ depends on ARCH_R8A7740
+
comment "SH-Mobile System Configuration"
menu "Memory configuration"
@@ -89,7 +94,7 @@ config MEMORY_START
hex "Physical memory start address"
default "0x50000000" if MACH_G3EVM
default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
- MACH_MACKEREL
+ MACH_MACKEREL || MACH_BONITO
default "0x41000000" if MACH_KOTA2
default "0x00000000"
---help---
@@ -101,7 +106,7 @@ config MEMORY_SIZE
hex "Physical memory size"
default "0x08000000" if MACH_G3EVM
default "0x08000000" if MACH_G4EVM
- default "0x20000000" if MACH_AG5EVM
+ default "0x20000000" if MACH_AG5EVM || MACH_BONITO
default "0x1e000000" if MACH_KOTA2
default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
default "0x04000000"
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 971f703..abdae89 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
obj-$(CONFIG_MACH_KOTA2) += board-kota2.o
+obj-$(CONFIG_MACH_BONITO) += board-bonito.o
# Framework support
obj-$(CONFIG_SMP) += $(smp-y)
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
new file mode 100644
index 0000000..901d745
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -0,0 +1,187 @@
+/*
+ * bonito board support
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/r8a7740.h>
+
+/*
+ * CS Address device note
+ *----------------------------------------------------------------
+ * 0 0x0000_0000 NOR Flash (64MB) SW12 : bit3 = OFF
+ * 2 0x0800_0000 ExtNOR (64MB) SW12 : bit3 = OFF
+ * 4 -
+ * 5A -
+ * 5B 0x1600_0000 SRAM (8MB)
+ * 6 0x1800_0000 FPGA (64K)
+ * 0x1801_0000 Ether (4KB)
+ * 0x1801_1000 USB (4KB)
+ */
+
+/*
+ * SW12
+ *
+ * bit1 bit2 bit3
+ *----------------------------------------------------------------------------
+ * ON NOR WriteProtect NAND WriteProtect CS0 ExtNOR / CS2 NOR
+ * OFF NOR Not WriteProtect NAND Not WriteProtect CS0 NOR / CS2 ExtNOR
+ */
+
+/*
+ * FPGA
+ */
+#define A1MDSR 0x10E0
+#define BVERR 0x1100
+static u16 bonito_fpga_read(u32 offset)
+{
+ return __raw_readw(0xf0003000 + offset);
+}
+
+static void bonito_fpga_write(u32 offset, u16 val)
+{
+ __raw_writew(val, 0xf0003000 + offset);
+}
+
+/*
+ * devices
+ */
+static struct platform_device *bonito_devices[] __initdata = {
+};
+
+/*
+ * map I/O
+ */
+static struct map_desc bonito_io_desc[] __initdata = {
+ /*
+ * for CPGA/INTC/PFC
+ * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff
+ */
+ {
+ .virtual = 0xe6000000,
+ .pfn = __phys_to_pfn(0xe6000000),
+ .length = 160 << 20,
+ .type = MT_DEVICE_NONSHARED
+ },
+#ifdef CONFIG_CACHE_L2X0
+ /*
+ * for l2x0_init()
+ * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000
+ */
+ {
+ .virtual = 0xf0002000,
+ .pfn = __phys_to_pfn(0xf0100000),
+ .length = PAGE_SIZE,
+ .type = MT_DEVICE_NONSHARED
+ },
+#endif
+ /*
+ * for FPGA (0x1800000-0x19ffffff)
+ * 0x18000000-0x18002000 -> 0xf0003000-0xf0005000
+ */
+ {
+ .virtual = 0xf0003000,
+ .pfn = __phys_to_pfn(0x18000000),
+ .length = PAGE_SIZE * 2,
+ .type = MT_DEVICE_NONSHARED
+ }
+};
+
+static void __init bonito_map_io(void)
+{
+ iotable_init(bonito_io_desc, ARRAY_SIZE(bonito_io_desc));
+
+ /* setup early devices and console here as well */
+ r8a7740_add_early_devices();
+ shmobile_setup_console();
+}
+
+/*
+ * board init
+ */
+static void __init bonito_init(void)
+{
+ u16 val;
+
+ r8a7740_pinmux_init();
+
+ /* FPGA */
+ gpio_request(GPIO_FN_CS5B, NULL);
+ gpio_request(GPIO_FN_CS6A, NULL);
+ gpio_request(GPIO_FN_CS5A_PORT105, NULL);
+ gpio_request(GPIO_FN_IRQ10, NULL);
+
+ val = bonito_fpga_read(BVERR);
+ pr_info("bonito version: cpu %02x, base %02x\n",
+ ((val >> 8) & 0xFF),
+ ((val >> 0) & 0xFF));
+
+ /* SCIFA5 */
+ gpio_request(GPIO_FN_SCIFA5_TXD_PORT91, NULL);
+ gpio_request(GPIO_FN_SCIFA5_RXD_PORT92, NULL);
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Early BRESP enable, Shared attribute override enable, 32K*8way */
+ l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff);
+#endif
+
+ r8a7740_add_standard_devices();
+ platform_add_devices(bonito_devices, ARRAY_SIZE(bonito_devices));
+}
+
+static void __init bonito_timer_init(void)
+{
+ u16 val;
+ u8 md_ck = 0;
+
+ /* read MD_CK value */
+ val = bonito_fpga_read(A1MDSR);
+ if (val & (1 << 10))
+ md_ck |= MD_CK2;
+ if (val & (1 << 9))
+ md_ck |= MD_CK1;
+ if (val & (1 << 8))
+ md_ck |= MD_CK0;
+
+ r8a7740_clock_init(md_ck);
+ shmobile_timer.init();
+}
+
+struct sys_timer bonito_timer = {
+ .init = bonito_timer_init,
+};
+
+MACHINE_START(BONITO, "bonito")
+ .map_io = bonito_map_io,
+ .init_irq = r8a7740_init_irq,
+ .handle_irq = shmobile_handle_irq_intc,
+ .init_machine = bonito_init,
+ .timer = &bonito_timer,
+MACHINE_END
--
1.7.5.4
^ permalink raw reply related
* [PATCH 16/20] ARM: mach-shmobile: bonito: Add dip-switch selector
From: Kuninori Morimoto @ 2011-11-11 2:46 UTC (permalink / raw)
To: linux-sh
devices enable/disable are controled by dip-switch on bonito board.
If bonito core board is connected to base board,
you can check the settings from FPGA.
This patch adds basic code and controls SCIFA5 settings
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/board-bonito.c | 88 ++++++++++++++++++++++++++------
1 files changed, 71 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index 901d745..efaa5fe 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -56,8 +56,21 @@
*/
/*
+ * SCIFA5 (CN42)
+ *
+ * S38.3 = ON
+ * S39.6 = ON
+ * S43.1 = ON
+ */
+
+/*
* FPGA
*/
+#define BUSSWMR1 0x0070
+#define BUSSWMR2 0x0072
+#define BUSSWMR3 0x0074
+#define BUSSWMR4 0x0076
+
#define A1MDSR 0x10E0
#define BVERR 0x1100
static u16 bonito_fpga_read(u32 offset)
@@ -71,9 +84,15 @@ static void bonito_fpga_write(u32 offset, u16 val)
}
/*
- * devices
+ * core board devices
*/
-static struct platform_device *bonito_devices[] __initdata = {
+static struct platform_device *bonito_core_devices[] __initdata = {
+};
+
+/*
+ * base board devices
+ */
+static struct platform_device *bonito_base_devices[] __initdata = {
};
/*
@@ -126,26 +145,18 @@ static void __init bonito_map_io(void)
/*
* board init
*/
+#define BIT_ON(sw, bit) (sw & (1 << bit))
+#define BIT_OFF(sw, bit) (!(sw & (1 << bit)))
+
static void __init bonito_init(void)
{
u16 val;
r8a7740_pinmux_init();
- /* FPGA */
- gpio_request(GPIO_FN_CS5B, NULL);
- gpio_request(GPIO_FN_CS6A, NULL);
- gpio_request(GPIO_FN_CS5A_PORT105, NULL);
- gpio_request(GPIO_FN_IRQ10, NULL);
-
- val = bonito_fpga_read(BVERR);
- pr_info("bonito version: cpu %02x, base %02x\n",
- ((val >> 8) & 0xFF),
- ((val >> 0) & 0xFF));
-
- /* SCIFA5 */
- gpio_request(GPIO_FN_SCIFA5_TXD_PORT91, NULL);
- gpio_request(GPIO_FN_SCIFA5_RXD_PORT92, NULL);
+ /*
+ * core board settings
+ */
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 32K*8way */
@@ -153,7 +164,50 @@ static void __init bonito_init(void)
#endif
r8a7740_add_standard_devices();
- platform_add_devices(bonito_devices, ARRAY_SIZE(bonito_devices));
+
+ platform_add_devices(bonito_core_devices,
+ ARRAY_SIZE(bonito_core_devices));
+
+ /*
+ * base board settings
+ */
+ gpio_request(GPIO_PORT176, NULL);
+ gpio_direction_input(GPIO_PORT176);
+ if (!gpio_get_value(GPIO_PORT176)) {
+ u16 bsw2;
+ u16 bsw3;
+ u16 bsw4;
+
+ /*
+ * FPGA
+ */
+ gpio_request(GPIO_FN_CS5B, NULL);
+ gpio_request(GPIO_FN_CS6A, NULL);
+ gpio_request(GPIO_FN_CS5A_PORT105, NULL);
+ gpio_request(GPIO_FN_IRQ10, NULL);
+
+ val = bonito_fpga_read(BVERR);
+ pr_info("bonito version: cpu %02x, base %02x\n",
+ ((val >> 8) & 0xFF),
+ ((val >> 0) & 0xFF));
+
+ bsw2 = bonito_fpga_read(BUSSWMR2);
+ bsw3 = bonito_fpga_read(BUSSWMR3);
+ bsw4 = bonito_fpga_read(BUSSWMR4);
+
+ /*
+ * SCIFA5 (CN42)
+ */
+ if (BIT_OFF(bsw2, 1) && /* S38.3 = ON */
+ BIT_OFF(bsw3, 9) && /* S39.6 = ON */
+ BIT_OFF(bsw4, 4)) { /* S43.1 = ON */
+ gpio_request(GPIO_FN_SCIFA5_TXD_PORT91, NULL);
+ gpio_request(GPIO_FN_SCIFA5_RXD_PORT92, NULL);
+ }
+
+ platform_add_devices(bonito_base_devices,
+ ARRAY_SIZE(bonito_base_devices));
+ }
}
static void __init bonito_timer_init(void)
--
1.7.5.4
^ permalink raw reply related
* [PATCH 17/20] ARM: mach-shmobile: bonito: add PMIC settings
From: Kuninori Morimoto @ 2011-11-11 2:47 UTC (permalink / raw)
To: linux-sh
bonito board needs some settings by pmic which use i2c access.
It is dependent on the device to be used.
This patch adds standard settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/board-bonito.c | 53 +++++++++++++++++++++++++++++++++
1 files changed, 53 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index efaa5fe..d78008b 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -20,6 +20,7 @@
*/
#include <linux/kernel.h>
+#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -84,6 +85,56 @@ static void bonito_fpga_write(u32 offset, u16 val)
}
/*
+* PMIC settings
+*
+* FIXME
+*
+* bonito board needs some settings by pmic which use i2c access.
+* pmic settings use device_initcall() here for use it.
+*/
+static __u8 *pmic_settings = NULL;
+static __u8 pmic_do_2A[] = {
+ 0x1C, 0x09,
+ 0x1A, 0x80,
+ 0xff, 0xff,
+};
+
+static int __init pmic_init(void)
+{
+ struct i2c_adapter *a = i2c_get_adapter(0);
+ struct i2c_msg msg;
+ __u8 buf[2];
+ int i, ret;
+
+ if (!pmic_settings)
+ return 0;
+ if (!a)
+ return 0;
+
+ msg.addr = 0x46;
+ msg.buf = buf;
+ msg.len = 2;
+ msg.flags = 0;
+
+ for (i = 0; ; i += 2) {
+ buf[0] = pmic_settings[i + 0];
+ buf[1] = pmic_settings[i + 1];
+
+ if ((0xff = buf[0]) && (0xff = buf[1]))
+ break;
+
+ ret = i2c_transfer(a, &msg, 1);
+ if (ret < 0) {
+ pr_err("i2c transfer fail\n");
+ break;
+ }
+ }
+
+ return 0;
+}
+device_initcall(pmic_init);
+
+/*
* core board devices
*/
static struct platform_device *bonito_core_devices[] __initdata = {
@@ -154,6 +205,8 @@ static void __init bonito_init(void)
r8a7740_pinmux_init();
+ pmic_settings = pmic_do_2A;
+
/*
* core board settings
*/
--
1.7.5.4
^ permalink raw reply related
* [PATCH 18/20] ARM: mach-shmobile: bonito: Add LCDC0 support
From: Kuninori Morimoto @ 2011-11-11 2:47 UTC (permalink / raw)
To: linux-sh
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/board-bonito.c | 117 ++++++++++++++++++++++++++++++++
arch/arm/mach-shmobile/clock-r8a7740.c | 6 ++-
2 files changed, 122 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index d78008b..5b01476 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -33,6 +33,7 @@
#include <asm/mach/time.h>
#include <asm/hardware/cache-l2x0.h>
#include <mach/r8a7740.h>
+#include <video/sh_mobile_lcdc.h>
/*
* CS Address device note
@@ -65,6 +66,13 @@
*/
/*
+ * LCDC0 (CN3/CN4/CN7)
+ *
+ * S38.1 = OFF
+ * S38.2 = OFF
+ */
+
+/*
* FPGA
*/
#define BUSSWMR1 0x0070
@@ -72,6 +80,7 @@
#define BUSSWMR3 0x0074
#define BUSSWMR4 0x0076
+#define LCDCR 0x10B4
#define A1MDSR 0x10E0
#define BVERR 0x1100
static u16 bonito_fpga_read(u32 offset)
@@ -135,6 +144,63 @@ static int __init pmic_init(void)
device_initcall(pmic_init);
/*
+ * LCDC0
+ */
+static const struct fb_videomode lcdc0_mode = {
+ .name = "WVGA Panel",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 88,
+ .right_margin = 40,
+ .hsync_len = 128,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .sync = 0,
+};
+
+static struct sh_mobile_lcdc_info lcdc0_info = {
+ .clock_source = LCDC_CLK_BUS,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ .interface_type = RGB24,
+ .clock_divider = 5,
+ .flags = 0,
+ .lcd_cfg = &lcdc0_mode,
+ .num_cfg = 1,
+ .lcd_size_cfg = {
+ .width = 152,
+ .height = 91,
+ },
+ },
+};
+
+static struct resource lcdc0_resources[] = {
+ [0] = {
+ .name = "LCDC0",
+ .start = 0xfe940000,
+ .end = 0xfe943fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0x0580),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device lcdc0_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .id = 0,
+ .resource = lcdc0_resources,
+ .num_resources = ARRAY_SIZE(lcdc0_resources),
+ .dev = {
+ .platform_data = &lcdc0_info,
+ .coherent_dma_mask = ~0,
+ },
+};
+
+/*
* core board devices
*/
static struct platform_device *bonito_core_devices[] __initdata = {
@@ -144,6 +210,7 @@ static struct platform_device *bonito_core_devices[] __initdata = {
* base board devices
*/
static struct platform_device *bonito_base_devices[] __initdata = {
+ &lcdc0_device,
};
/*
@@ -199,6 +266,9 @@ static void __init bonito_map_io(void)
#define BIT_ON(sw, bit) (sw & (1 << bit))
#define BIT_OFF(sw, bit) (!(sw & (1 << bit)))
+#define VCCQ1CR 0xE6058140
+#define VCCQ1LCDCR 0xE6058186
+
static void __init bonito_init(void)
{
u16 val;
@@ -258,6 +328,53 @@ static void __init bonito_init(void)
gpio_request(GPIO_FN_SCIFA5_RXD_PORT92, NULL);
}
+ /*
+ * LCDC0 (CN3)
+ */
+ if (BIT_ON(bsw2, 3) && /* S38.1 = OFF */
+ BIT_ON(bsw2, 2)) { /* S38.2 = OFF */
+ gpio_request(GPIO_FN_LCDC0_SELECT, NULL);
+ gpio_request(GPIO_FN_LCD0_D0, NULL);
+ gpio_request(GPIO_FN_LCD0_D1, NULL);
+ gpio_request(GPIO_FN_LCD0_D2, NULL);
+ gpio_request(GPIO_FN_LCD0_D3, NULL);
+ gpio_request(GPIO_FN_LCD0_D4, NULL);
+ gpio_request(GPIO_FN_LCD0_D5, NULL);
+ gpio_request(GPIO_FN_LCD0_D6, NULL);
+ gpio_request(GPIO_FN_LCD0_D7, NULL);
+ gpio_request(GPIO_FN_LCD0_D8, NULL);
+ gpio_request(GPIO_FN_LCD0_D9, NULL);
+ gpio_request(GPIO_FN_LCD0_D10, NULL);
+ gpio_request(GPIO_FN_LCD0_D11, NULL);
+ gpio_request(GPIO_FN_LCD0_D12, NULL);
+ gpio_request(GPIO_FN_LCD0_D13, NULL);
+ gpio_request(GPIO_FN_LCD0_D14, NULL);
+ gpio_request(GPIO_FN_LCD0_D15, NULL);
+ gpio_request(GPIO_FN_LCD0_D16, NULL);
+ gpio_request(GPIO_FN_LCD0_D17, NULL);
+ gpio_request(GPIO_FN_LCD0_D18_PORT163, NULL);
+ gpio_request(GPIO_FN_LCD0_D19_PORT162, NULL);
+ gpio_request(GPIO_FN_LCD0_D20_PORT161, NULL);
+ gpio_request(GPIO_FN_LCD0_D21_PORT158, NULL);
+ gpio_request(GPIO_FN_LCD0_D22_PORT160, NULL);
+ gpio_request(GPIO_FN_LCD0_D23_PORT159, NULL);
+ gpio_request(GPIO_FN_LCD0_DCK, NULL);
+ gpio_request(GPIO_FN_LCD0_VSYN, NULL);
+ gpio_request(GPIO_FN_LCD0_HSYN, NULL);
+ gpio_request(GPIO_FN_LCD0_DISP, NULL);
+ gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL);
+
+ gpio_request(GPIO_PORT61, NULL); /* LCDDON */
+ gpio_direction_output(GPIO_PORT61, 1);
+
+ /* backlight on */
+ bonito_fpga_write(LCDCR, 1);
+
+ /* drivability Max */
+ __raw_writew(0x00FF , VCCQ1LCDCR);
+ __raw_writew(0xFFFF , VCCQ1CR);
+ }
+
platform_add_devices(bonito_base_devices,
ARRAY_SIZE(bonito_base_devices));
}
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 5bb02f2..3b35b9a 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -251,7 +251,7 @@ static struct clk div6_clks[DIV6_NR] = {
enum {
MSTP125,
- MSTP116, MSTP111,
+ MSTP116, MSTP111, MSTP100, MSTP117,
MSTP230,
MSTP222,
@@ -264,8 +264,10 @@ enum {
static struct clk mstp_clks[MSTP_NR] = {
[MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
+ [MSTP117] = SH_CLK_MSTP32(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
[MSTP116] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
[MSTP111] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 11, 0), /* TMU1 */
+ [MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
[MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 30, 0), /* SCIFA6 */
[MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 22, 0), /* SCIFA7 */
@@ -314,8 +316,10 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
/* MSTP32 clocks */
+ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]),
CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP111]),
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]),
+ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]),
CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]),
--
1.7.5.4
^ permalink raw reply related
* [PATCH 19/20] ARM: mach-shmobile: bonito: add FPGA irq demux
From: Kuninori Morimoto @ 2011-11-11 2:47 UTC (permalink / raw)
To: linux-sh
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/board-bonito.c | 78 +++++++++++++++++++++++++++++++++
1 files changed, 78 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index 5b01476..fe749e3 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -26,6 +26,7 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/smsc911x.h>
#include <mach/common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -75,14 +76,25 @@
/*
* FPGA
*/
+#define IRQSR0 0x0020
+#define IRQSR1 0x0022
+#define IRQMR0 0x0030
+#define IRQMR1 0x0032
#define BUSSWMR1 0x0070
#define BUSSWMR2 0x0072
#define BUSSWMR3 0x0074
#define BUSSWMR4 0x0076
#define LCDCR 0x10B4
+#define DEVRSTCR1 0x10D0
+#define DEVRSTCR2 0x10D2
#define A1MDSR 0x10E0
#define BVERR 0x1100
+
+/* FPGA IRQ */
+#define FPGA_IRQ_BASE (512)
+#define FPGA_IRQ0 (FPGA_IRQ_BASE)
+#define FPGA_IRQ1 (FPGA_IRQ_BASE + 16)
static u16 bonito_fpga_read(u32 offset)
{
return __raw_readw(0xf0003000 + offset);
@@ -93,6 +105,71 @@ static void bonito_fpga_write(u32 offset, u16 val)
__raw_writew(val, 0xf0003000 + offset);
}
+static void bonito_fpga_irq_disable(struct irq_data *data)
+{
+ unsigned int irq = data->irq;
+ u32 addr = (irq < 1016) ? IRQMR0 : IRQMR1;
+ int shift = irq % 16;
+
+ bonito_fpga_write(addr, bonito_fpga_read(addr) | (1 << shift));
+}
+
+static void bonito_fpga_irq_enable(struct irq_data *data)
+{
+ unsigned int irq = data->irq;
+ u32 addr = (irq < 1016) ? IRQMR0 : IRQMR1;
+ int shift = irq % 16;
+
+ bonito_fpga_write(addr, bonito_fpga_read(addr) & ~(1 << shift));
+}
+
+static struct irq_chip bonito_fpga_irq_chip __read_mostly = {
+ .name = "bonito FPGA",
+ .irq_mask = bonito_fpga_irq_disable,
+ .irq_unmask = bonito_fpga_irq_enable,
+};
+
+static void bonito_fpga_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+ u32 val = bonito_fpga_read(IRQSR1) << 16 |
+ bonito_fpga_read(IRQSR0);
+ u32 mask = bonito_fpga_read(IRQMR1) << 16 |
+ bonito_fpga_read(IRQMR0);
+
+ int i;
+
+ val &= ~mask;
+
+ for (i = 0; i < 32; i++) {
+ if (!(val & (1 << i)))
+ continue;
+
+ generic_handle_irq(FPGA_IRQ_BASE + i);
+ }
+}
+
+static void bonito_fpga_init(void)
+{
+ int i;
+
+ bonito_fpga_write(IRQMR0, 0xffff); /* mask all */
+ bonito_fpga_write(IRQMR1, 0xffff); /* mask all */
+
+ /* Device reset */
+ bonito_fpga_write(DEVRSTCR1,
+ (1 << 2)); /* Eth */
+
+ /* FPGA irq require special handling */
+ for (i = FPGA_IRQ_BASE; i < FPGA_IRQ_BASE + 32; i++) {
+ irq_set_chip_and_handler_name(i, &bonito_fpga_irq_chip,
+ handle_level_irq, "level");
+ set_irq_flags(i, IRQF_VALID); /* yuck */
+ }
+
+ irq_set_chained_handler(evt2irq(0x0340), bonito_fpga_irq_demux);
+ irq_set_irq_type(evt2irq(0x0340), IRQ_TYPE_LEVEL_LOW);
+}
+
/*
* PMIC settings
*
@@ -274,6 +351,7 @@ static void __init bonito_init(void)
u16 val;
r8a7740_pinmux_init();
+ bonito_fpga_init();
pmic_settings = pmic_do_2A;
--
1.7.5.4
^ permalink raw reply related
* [PATCH 20/20] ARM: mach-shmobile: bonito: add SMSC9221 support
From: Kuninori Morimoto @ 2011-11-11 2:47 UTC (permalink / raw)
To: linux-sh
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/board-bonito.c | 33 +++++++++++++++++++++++++++++++++
1 files changed, 33 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index fe749e3..4d22016 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -95,6 +95,7 @@
#define FPGA_IRQ_BASE (512)
#define FPGA_IRQ0 (FPGA_IRQ_BASE)
#define FPGA_IRQ1 (FPGA_IRQ_BASE + 16)
+#define FPGA_ETH_IRQ (FPGA_IRQ0 + 15)
static u16 bonito_fpga_read(u32 offset)
{
return __raw_readw(0xf0003000 + offset);
@@ -278,6 +279,37 @@ static struct platform_device lcdc0_device = {
};
/*
+ * SMSC 9221
+ */
+static struct resource smsc_resources[] = {
+ [0] = {
+ .start = 0x18010000,
+ .end = 0x18011000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = FPGA_ETH_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smsc911x_platform_config smsc_platdata = {
+ .flags = SMSC911X_USE_16BIT,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device smsc_device = {
+ .name = "smsc911x",
+ .dev = {
+ .platform_data = &smsc_platdata,
+ },
+ .resource = smsc_resources,
+ .num_resources = ARRAY_SIZE(smsc_resources),
+};
+
+/*
* core board devices
*/
static struct platform_device *bonito_core_devices[] __initdata = {
@@ -288,6 +320,7 @@ static struct platform_device *bonito_core_devices[] __initdata = {
*/
static struct platform_device *bonito_base_devices[] __initdata = {
&lcdc0_device,
+ &smsc_device,
};
/*
--
1.7.5.4
^ permalink raw reply related
* Re: [PATCH 02/20] serial: sh-sci: clean up white space
From: Paul Mundt @ 2011-11-11 3:05 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <87y5vn9y5r.wl%kuninori.morimoto.gx@renesas.com>
On Thu, Nov 10, 2011 at 06:43:31PM -0800, Kuninori Morimoto wrote:
> #define SCxSR_ERRORS(port) (to_sci_port(port)->cfg->error_mask)
>
> -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
> - defined(CONFIG_CPU_SUBTYPE_SH7720) || \
> - defined(CONFIG_CPU_SUBTYPE_SH7721) || \
> - defined(CONFIG_ARCH_SH73A0) || \
> - defined(CONFIG_ARCH_SH7367) || \
> - defined(CONFIG_ARCH_SH7377) || \
> - defined(CONFIG_ARCH_SH7372)
> +#if defined(CONFIG_CPU_SUBTYPE_SH7705) ||\
> + defined(CONFIG_CPU_SUBTYPE_SH7720) ||\
> + defined(CONFIG_CPU_SUBTYPE_SH7721) ||\
> + defined(CONFIG_ARCH_SH73A0) ||\
> + defined(CONFIG_ARCH_SH7367) ||\
> + defined(CONFIG_ARCH_SH7377) ||\
> + defined(CONFIG_ARCH_SH7372)
> # define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
> # define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
> # define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf)
Err, no. I don't see this as an improvement, and I don't really see what
you think the issue with the first format is, either.
^ permalink raw reply
* Re: [PATCH 03/20] sh: clkfwk: add clk_rate_mult_range_round()
From: Paul Mundt @ 2011-11-11 3:05 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <87wrb79y5e.wl%kuninori.morimoto.gx@renesas.com>
On Thu, Nov 10, 2011 at 06:43:44PM -0800, Kuninori Morimoto wrote:
> Some clock pulse generator has PLL multiplication.
> clk_rate_mult_range_round() will be good helper for it.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> drivers/sh/clk/core.c | 20 ++++++++++++++++++++
> include/linux/sh_clk.h | 3 +++
> 2 files changed, 23 insertions(+), 0 deletions(-)
>
This is already applied to my common/clkfwk branch. I'll be sending it
out with the -rc2 updates.
^ permalink raw reply
* Re: [PATCH 02/20] serial: sh-sci: clean up white space
From: Kuninori Morimoto @ 2011-11-11 3:25 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <87y5vn9y5r.wl%kuninori.morimoto.gx@renesas.com>
Hi Paul
Thank you for checking.
> On Thu, Nov 10, 2011 at 06:43:31PM -0800, Kuninori Morimoto wrote:
> > #define SCxSR_ERRORS(port) (to_sci_port(port)->cfg->error_mask)
> >
> > -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
> > - defined(CONFIG_CPU_SUBTYPE_SH7720) || \
> > - defined(CONFIG_CPU_SUBTYPE_SH7721) || \
> > - defined(CONFIG_ARCH_SH73A0) || \
> > - defined(CONFIG_ARCH_SH7367) || \
> > - defined(CONFIG_ARCH_SH7377) || \
> > - defined(CONFIG_ARCH_SH7372)
> > +#if defined(CONFIG_CPU_SUBTYPE_SH7705) ||\
> > + defined(CONFIG_CPU_SUBTYPE_SH7720) ||\
> > + defined(CONFIG_CPU_SUBTYPE_SH7721) ||\
> > + defined(CONFIG_ARCH_SH73A0) ||\
> > + defined(CONFIG_ARCH_SH7367) ||\
> > + defined(CONFIG_ARCH_SH7377) ||\
> > + defined(CONFIG_ARCH_SH7372)
> > # define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
> > # define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
> > # define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf)
>
> Err, no. I don't see this as an improvement, and I don't really see what
> you think the issue with the first format is, either.
OK. this is not important. please drop it.
but [PATCH 11/20] ARM: mach-shmobile: R-Mobile A1 support.
is depend on this patch.
I will re-post it.
Best regards
---
Kuninori Morimoto
^ permalink raw reply
* Re: [PATCH 02/20] serial: sh-sci: clean up white space
From: Paul Mundt @ 2011-11-11 3:47 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <87y5vn9y5r.wl%kuninori.morimoto.gx@renesas.com>
On Thu, Nov 10, 2011 at 07:25:33PM -0800, Kuninori Morimoto wrote:
> > On Thu, Nov 10, 2011 at 06:43:31PM -0800, Kuninori Morimoto wrote:
> > > #define SCxSR_ERRORS(port) (to_sci_port(port)->cfg->error_mask)
> > >
> > > -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
> > > - defined(CONFIG_CPU_SUBTYPE_SH7720) || \
> > > - defined(CONFIG_CPU_SUBTYPE_SH7721) || \
> > > - defined(CONFIG_ARCH_SH73A0) || \
> > > - defined(CONFIG_ARCH_SH7367) || \
> > > - defined(CONFIG_ARCH_SH7377) || \
> > > - defined(CONFIG_ARCH_SH7372)
> > > +#if defined(CONFIG_CPU_SUBTYPE_SH7705) ||\
> > > + defined(CONFIG_CPU_SUBTYPE_SH7720) ||\
> > > + defined(CONFIG_CPU_SUBTYPE_SH7721) ||\
> > > + defined(CONFIG_ARCH_SH73A0) ||\
> > > + defined(CONFIG_ARCH_SH7367) ||\
> > > + defined(CONFIG_ARCH_SH7377) ||\
> > > + defined(CONFIG_ARCH_SH7372)
> > > # define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
> > > # define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
> > > # define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf)
> >
> > Err, no. I don't see this as an improvement, and I don't really see what
> > you think the issue with the first format is, either.
>
> OK. this is not important. please drop it.
> but [PATCH 11/20] ARM: mach-shmobile: R-Mobile A1 support.
> is depend on this patch.
> I will re-post it.
>
Not a big deal, I will just fix it up by hand.
^ permalink raw reply
* Re: [PATCH 02/20] serial: sh-sci: clean up white space
From: Kuninori Morimoto @ 2011-11-11 3:51 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <87y5vn9y5r.wl%kuninori.morimoto.gx@renesas.com>
Hi Paul
> > OK. this is not important. please drop it.
> > but [PATCH 11/20] ARM: mach-shmobile: R-Mobile A1 support.
> > is depend on this patch.
> > I will re-post it.
> >
> Not a big deal, I will just fix it up by hand.
Thank you
Best regards
---
Kuninori Morimoto
^ permalink raw reply
* [PATCH] ARM: mach-shmobile: cpuidle single/global and last_state fixes
From: Magnus Damm @ 2011-11-11 5:01 UTC (permalink / raw)
To: linux-sh
From: Magnus Damm <damm@opensource.se>
The following commits break cpuidle on SH-Mobile ARM:
46bcfad cpuidle: Single/Global registration of idle states
e978aa7 cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state
This patch remedies these issues by up-porting the SH-Mobile
code to fit with the above introduced framework changes.
It is worth noting that the new code becomes significantly cleaner,
so these framework changes are very welcome. At the same time this
breakage could probably have been avoided by grepping for "last_state"
and "cpuidle_register_driver".
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/mach-shmobile/cpuidle.c | 52 +++++++++++---------------
arch/arm/mach-shmobile/include/mach/common.h | 4 +-
arch/arm/mach-shmobile/pm-sh7372.c | 14 ++-----
3 files changed, 30 insertions(+), 40 deletions(-)
--- 0001/arch/arm/mach-shmobile/cpuidle.c
+++ work/arch/arm/mach-shmobile/cpuidle.c 2011-11-11 13:48:36.000000000 +0900
@@ -26,65 +26,59 @@ void (*shmobile_cpuidle_modes[CPUIDLE_ST
};
static int shmobile_cpuidle_enter(struct cpuidle_device *dev,
- struct cpuidle_state *state)
+ struct cpuidle_driver *drv,
+ int index)
{
ktime_t before, after;
- int requested_state = state - &dev->states[0];
- dev->last_state = &dev->states[requested_state];
before = ktime_get();
local_irq_disable();
local_fiq_disable();
- shmobile_cpuidle_modes[requested_state]();
+ shmobile_cpuidle_modes[index]();
local_irq_enable();
local_fiq_enable();
after = ktime_get();
- return ktime_to_ns(ktime_sub(after, before)) >> 10;
+ dev->last_residency = ktime_to_ns(ktime_sub(after, before)) >> 10;
+
+ return index;
}
static struct cpuidle_device shmobile_cpuidle_dev;
static struct cpuidle_driver shmobile_cpuidle_driver = {
.name = "shmobile_cpuidle",
.owner = THIS_MODULE,
+ .states[0] = {
+ .name = "C1",
+ .desc = "WFI",
+ .exit_latency = 1,
+ .target_residency = 1 * 2,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ },
+ .safe_state_index = 0, /* C1 */
+ .state_count = 1,
};
-void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
+void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
static int shmobile_cpuidle_init(void)
{
struct cpuidle_device *dev = &shmobile_cpuidle_dev;
- struct cpuidle_state *state;
+ struct cpuidle_driver *drv = &shmobile_cpuidle_driver;
int i;
- cpuidle_register_driver(&shmobile_cpuidle_driver);
-
- for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
- dev->states[i].name[0] = '\0';
- dev->states[i].desc[0] = '\0';
- dev->states[i].enter = shmobile_cpuidle_enter;
- }
-
- i = CPUIDLE_DRIVER_STATE_START;
-
- state = &dev->states[i++];
- snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
- strncpy(state->desc, "WFI", CPUIDLE_DESC_LEN);
- state->exit_latency = 1;
- state->target_residency = 1 * 2;
- state->power_usage = 3;
- state->flags = 0;
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
-
- dev->safe_state = state;
- dev->state_count = i;
+ for (i = 0; i < CPUIDLE_STATE_MAX; i++)
+ drv->states[i].enter = shmobile_cpuidle_enter;
if (shmobile_cpuidle_setup)
- shmobile_cpuidle_setup(dev);
+ shmobile_cpuidle_setup(drv);
+
+ cpuidle_register_driver(drv);
+ dev->state_count = drv->state_count;
cpuidle_register_device(dev);
return 0;
--- 0001/arch/arm/mach-shmobile/include/mach/common.h
+++ work/arch/arm/mach-shmobile/include/mach/common.h 2011-11-11 13:44:15.000000000 +0900
@@ -9,9 +9,9 @@ extern int clk_init(void);
extern void shmobile_handle_irq_intc(struct pt_regs *);
extern void shmobile_handle_irq_gic(struct pt_regs *);
extern struct platform_suspend_ops shmobile_suspend_ops;
-struct cpuidle_device;
+struct cpuidle_driver;
extern void (*shmobile_cpuidle_modes[])(void);
-extern void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
+extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
extern void sh7367_init_irq(void);
extern void sh7367_add_early_devices(void);
--- 0004/arch/arm/mach-shmobile/pm-sh7372.c
+++ work/arch/arm/mach-shmobile/pm-sh7372.c 2011-11-11 13:44:15.000000000 +0900
@@ -405,22 +405,18 @@ static void sh7372_setup_a3sm(unsigned l
#ifdef CONFIG_CPU_IDLE
-static void sh7372_cpuidle_setup(struct cpuidle_device *dev)
+static void sh7372_cpuidle_setup(struct cpuidle_driver *drv)
{
- struct cpuidle_state *state;
- int i = dev->state_count;
+ struct cpuidle_state *state = &drv->states[drv->state_count];
- state = &dev->states[i];
snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
strncpy(state->desc, "Core Standby Mode", CPUIDLE_DESC_LEN);
state->exit_latency = 10;
state->target_residency = 20 + 10;
- state->power_usage = 1; /* perhaps not */
- state->flags = 0;
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
- shmobile_cpuidle_modes[i] = sh7372_enter_core_standby;
+ state->flags = CPUIDLE_FLAG_TIME_VALID;
+ shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_core_standby;
- dev->state_count = i + 1;
+ drv->state_count++;
}
static void sh7372_cpuidle_init(void)
^ permalink raw reply
* Re: Question about clk->usecount
From: Paul Mundt @ 2011-11-11 5:42 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <87fwihj3x8.wl%kuninori.morimoto.gx@renesas.com>
On Thu, Nov 03, 2011 at 09:30:12PM -0700, Kuninori Morimoto wrote:
>
> Hi Paul
>
> > > @@ -152,7 +159,12 @@ int __init sh_hwblk_clk_register(struct clk *clks, int nr)
> > > continue;
> > >
> > > clkp->ops = &sh_hwblk_clk_ops;
> > > - ret |= clk_register(clkp);
> > > + ret = clk_register(clkp);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + if (hwblk_info)
> > > + hwblk_info->hwblks[k].clk = clkp;
> > > }
> > >
> > > return ret;
> >
> > The error path handling here is a bit of an unusual case. clk_register()
> > failing on one clock is not necessarily an indicator that other clocks
> > can't be succesfully registered, so we're better off simply checking if
> > clk_register() succeeds and then stashing the clock pointer, rather than
> > bailing on the loop entirely.
> >
> > The general idea seems to be heading in the right direction though.
>
> Thank you for your comment.
> I understand it.
>
> But I have 1 thing to worry about on this rough patch.
> it is clock parent.
> I'm not sure who/how control clock parent.
>
> Because current pm_runtime_xxx() functions which was calling hwblk_enable/disable()
> (seems) didn't care its parent clock.
> but clk_enable/disable() care it.
>
> if we used clk_enable/disable() instead of hwblk_enable/disable(),
> but some upper function is already caring clock parent,
> it will be double cared (from upper function / clk_enable/disable())
> But if upper function didn't care parent,
> clock parent will be out of PM control (?).
> I'm not sure.
>
Incidentally I also seem to see some issues on SH7786 with the late clock
disabling and runtime PM built in, even though there really isn't any
specific runtime PM support for the platform. I expect we're somehow
getting in to a refcounting war somehow which is causing unexpected
disabling behaviour.
I'll see about getting runtime PM support properly enabled on SH7786 to
see if the issues persist, but for now I'm just leaving it turned off.
You may wish to see if that also helps in your case.
^ permalink raw reply
* Re: [PATCH 04/20] ARM: mach-shmobile: sh73a0: add MMC data pin pull-up
From: Paul Mundt @ 2011-11-11 7:47 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <87vcqr9y4b.wl%kuninori.morimoto.gx@renesas.com>
On Thu, Nov 10, 2011 at 06:44:24PM -0800, Kuninori Morimoto wrote:
> This patch adds MMC data pin pull-up option for pfc-sh73a0.c,
> and select it on ag5evm board.
> The MMC read/write will be error without this patch.
>
> Cc: Takashi YOSHII <takashi.yoshii.zj@renesas.com>
> Tested-by: Simon Horman <horms@verge.net.au>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
On Thu, Nov 10, 2011 at 06:44:43PM -0800, Kuninori Morimoto wrote:
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> arch/arm/mach-shmobile/board-kota2.c | 7 +++++++
> 1 files changed, 7 insertions(+), 0 deletions(-)
On Thu, Nov 10, 2011 at 06:45:02PM -0800, Kuninori Morimoto wrote:
> it is not necessary to have sh7372_xxxx index on static variable
On Thu, Nov 10, 2011 at 06:45:12PM -0800, Kuninori Morimoto wrote:
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> arch/arm/mach-shmobile/board-ap4evb.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
On Thu, Nov 10, 2011 at 06:45:23PM -0800, Kuninori Morimoto wrote:
> This patch move PORT_DATA_xx helper macro to sh_pfc.h.
> and pfc-sh7372.c used it
On Thu, Nov 10, 2011 at 06:45:33PM -0800, Kuninori Morimoto wrote:
> This patch moves PORT_xx helper macro to sh_pfc.h,
> and it expects CPU_ALL_PORT() macro for each CPU
On Thu, Nov 10, 2011 at 06:45:43PM -0800, Kuninori Morimoto wrote:
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> arch/arm/mach-shmobile/pfc-sh7367.c | 16 ----------------
> arch/arm/mach-shmobile/pfc-sh7372.c | 16 ----------------
> arch/arm/mach-shmobile/pfc-sh7377.c | 17 -----------------
> arch/arm/mach-shmobile/pfc-sh73a0.c | 12 ------------
> include/linux/sh_pfc.h | 17 +++++++++++++++++
> 5 files changed, 17 insertions(+), 61 deletions(-)
All applied, thanks.
^ permalink raw reply
* Re: [PATCH] ARM: mach-shmobile: sh7372 A4R suspend/resume order fix
From: Guennadi Liakhovetski @ 2011-11-11 7:49 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <20110927085408.27727.59395.sendpatchset@w520>
On Fri, 11 Nov 2011, Magnus Damm wrote:
> > From: Rafael J. Wysocki <rjw@sisk.pl>
> > Subject: PM / shmobile: Avoid restoring the INTCS state during initialization
> >
> > The SH7372 PM domain initialization routine calls pd_power_up()
> > that executes the domain's .resume() callback, if present, and for
> > the A4R domain this callback attepmts to restore the INTCS state from
> > uninitialized data. To avoid that, introduce __pd_power_up() that
> > will only execute the domain's .resume() callback if its second
> > argument is 'true' and make the SH7372 PM domain initialization
> > use it with 'false' as its second argument. Redefine pd_power_up()
> > as a wrapper around __pd_power_up().
> >
> > Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> > Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
>
> Looks fine to me, from my point of view your implementation is better
> than the other alternatives.
>
> It is correct that Guennadi reported this issue, and the Signed-off
> clearly shows that this specific implementation is coming from you. I
> suppose there are more important things in life than git attribution,
> but I do feel that I did spend a significant amount of time tracking
> down this issue, writing the initial patch and then also communicating
> with you guys. I may be wrong, but I suspect that if didn't do this
> then this issue wouldn't have been fixed.
>
> Unfortunately there does not seem to be any tag for that kind of work,
> but if it existed then I would prefer to add this in between you and
> Guennadi:
>
> Tracked-down-by: Magnus Damm <damm@opensource.se>
Yes, I also was looking for a suitable attribution to mention you in my
version of the patch, and ended up just saying "thanks." But, I think,
we're allowed to be creative here, we're not prohibited to create our own
tags - whether or not they're going to be standardised. Maybe we can put
it even stronger to emphasise, that you not only tracked the problem down,
but also proposed the first fix. Something like
Initial-fix-by:
or
Original-fix-by:
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
^ permalink raw reply
* Re: [PATCH] ARM: mach-shmobile: cpuidle single/global and last_state fixes
From: Paul Mundt @ 2011-11-11 7:51 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <20111111050130.9104.12599.sendpatchset@w520>
On Fri, Nov 11, 2011 at 02:01:30PM +0900, Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
>
> The following commits break cpuidle on SH-Mobile ARM:
>
> 46bcfad cpuidle: Single/Global registration of idle states
> e978aa7 cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state
>
> This patch remedies these issues by up-porting the SH-Mobile
> code to fit with the above introduced framework changes.
>
> It is worth noting that the new code becomes significantly cleaner,
> so these framework changes are very welcome. At the same time this
> breakage could probably have been avoided by grepping for "last_state"
> and "cpuidle_register_driver".
>
> Signed-off-by: Magnus Damm <damm@opensource.se>
Applied, thanks.
^ permalink raw reply
* Re: [PATCH 11/20] ARM: mach-shmobile: R-Mobile A1 support.
From: Paul Mundt @ 2011-11-11 8:04 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <87lirn9y1u.wl%kuninori.morimoto.gx@renesas.com>
On Thu, Nov 10, 2011 at 06:45:52PM -0800, Kuninori Morimoto wrote:
> This adds preliminary support for the R8A7740 (R-Mobile A1) CPU
>
> Timer, serial, gic, clock are supported at this point.
> This patch is based on v0.1 manual
On Thu, Nov 10, 2011 at 06:46:08PM -0800, Kuninori Morimoto wrote:
> This adds PFC support for the R8A7740 (R-Mobile A1) CPU
> This patch is based on v0.1 manual
On Thu, Nov 10, 2011 at 06:46:23PM -0800, Kuninori Morimoto wrote:
> This patch adds I2C support to r8a7740 CPU
> which has lasting errata on I2C I/O pad reset.
> This patch is including work-around.
On Thu, Nov 10, 2011 at 06:46:35PM -0800, Kuninori Morimoto wrote:
> R8A7740 GIC can not get external IRQx interrupt directly
> without GIC - INTC demux support.
>
> Current AG5 is using GIC - INTCS demux with
> special irq relocation. but GIC - INTCA demux
> is still not supported and it needs irq number re-mapping.
>
> OTOH, normal INTC support as before is very enough for R8A7740,
> because it is not SMP CPU.
> This patch adds INTCA/INTCS support instead of GIC.
All of these have been applied to the rmobile/a1 topic branch and
subsequently pulled in to rmobile-latest.
^ permalink raw reply
* Re: [PATCH 15/20] ARM: mach-shmobile: add bonito board support.
From: Paul Mundt @ 2011-11-11 8:05 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <87fwhv9y0d.wl%kuninori.morimoto.gx@renesas.com>
On Thu, Nov 10, 2011 at 06:46:45PM -0800, Kuninori Morimoto wrote:
> This adds basic bonito board (R-Mobile A1) support
On Thu, Nov 10, 2011 at 06:46:56PM -0800, Kuninori Morimoto wrote:
> devices enable/disable are controled by dip-switch on bonito board.
> If bonito core board is connected to base board,
> you can check the settings from FPGA.
> This patch adds basic code and controls SCIFA5 settings
On Thu, Nov 10, 2011 at 06:47:07PM -0800, Kuninori Morimoto wrote:
> bonito board needs some settings by pmic which use i2c access.
> It is dependent on the device to be used.
> This patch adds standard settings.
On Thu, Nov 10, 2011 at 06:47:16PM -0800, Kuninori Morimoto wrote:
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> arch/arm/mach-shmobile/board-bonito.c | 117 ++++++++++++++++++++++++++++++++
> arch/arm/mach-shmobile/clock-r8a7740.c | 6 ++-
> 2 files changed, 122 insertions(+), 1 deletions(-)
On Thu, Nov 10, 2011 at 06:47:26PM -0800, Kuninori Morimoto wrote:
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> arch/arm/mach-shmobile/board-bonito.c | 78 +++++++++++++++++++++++++++++++++
> 1 files changed, 78 insertions(+), 0 deletions(-)
On Thu, Nov 10, 2011 at 06:47:36PM -0800, Kuninori Morimoto wrote:
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> arch/arm/mach-shmobile/board-bonito.c | 33 +++++++++++++++++++++++++++++++++
> 1 files changed, 33 insertions(+), 0 deletions(-)
These have been rolled in to rmobile/bonito (which is based off of
rmobile/a1), where you can do some preliminary integration testing. I
won't roll it in to rmobile-latest until the necessary machine type has
settled though, as we're presently not able to build the defconfig until
that dependency has been sorted out.
^ permalink raw reply
* Re: [PATCH 15/20] ARM: mach-shmobile: add bonito board support.
From: Kuninori Morimoto @ 2011-11-11 8:28 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <87fwhv9y0d.wl%kuninori.morimoto.gx@renesas.com>
Hi Paul
> These have been rolled in to rmobile/bonito (which is based off of
> rmobile/a1), where you can do some preliminary integration testing. I
> won't roll it in to rmobile-latest until the necessary machine type has
> settled though, as we're presently not able to build the defconfig until
> that dependency has been sorted out.
Thank you
Sorry, I didn't explain about bonito machine type.
Best regards
---
Kuninori Morimoto
^ permalink raw reply
* Re: Question about clk->usecount
From: Kuninori Morimoto @ 2011-11-11 8:30 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <87fwihj3x8.wl%kuninori.morimoto.gx@renesas.com>
Hi Paul
> > But I have 1 thing to worry about on this rough patch.
> > it is clock parent.
> > I'm not sure who/how control clock parent.
(snip)
> Incidentally I also seem to see some issues on SH7786 with the late clock
> disabling and runtime PM built in, even though there really isn't any
> specific runtime PM support for the platform. I expect we're somehow
> getting in to a refcounting war somehow which is causing unexpected
> disabling behaviour.
>
> I'll see about getting runtime PM support properly enabled on SH7786 to
> see if the issues persist, but for now I'm just leaving it turned off.
> You may wish to see if that also helps in your case.
Thank you.
I try it when I had free time.
Best regards
---
Kuninori Morimoto
^ permalink raw reply
* Re: [PATCH] ARM: mach-shmobile: sh7372 A4R suspend/resume order fix
From: Rafael J. Wysocki @ 2011-11-11 11:58 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <20110927085408.27727.59395.sendpatchset@w520>
On Friday, November 11, 2011, Magnus Damm wrote:
> > From: Rafael J. Wysocki <rjw@sisk.pl>
> > Subject: PM / shmobile: Avoid restoring the INTCS state during initialization
> >
> > The SH7372 PM domain initialization routine calls pd_power_up()
> > that executes the domain's .resume() callback, if present, and for
> > the A4R domain this callback attepmts to restore the INTCS state from
> > uninitialized data. To avoid that, introduce __pd_power_up() that
> > will only execute the domain's .resume() callback if its second
> > argument is 'true' and make the SH7372 PM domain initialization
> > use it with 'false' as its second argument. Redefine pd_power_up()
> > as a wrapper around __pd_power_up().
> >
> > Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> > Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
>
> Looks fine to me, from my point of view your implementation is better
> than the other alternatives.
>
> It is correct that Guennadi reported this issue, and the Signed-off
> clearly shows that this specific implementation is coming from you. I
> suppose there are more important things in life than git attribution,
> but I do feel that I did spend a significant amount of time tracking
> down this issue, writing the initial patch and then also communicating
> with you guys. I may be wrong, but I suspect that if didn't do this
> then this issue wouldn't have been fixed.
>
> Unfortunately there does not seem to be any tag for that kind of work,
> but if it existed then I would prefer to add this in between you and
> Guennadi:
>
> Tracked-down-by: Magnus Damm <damm@opensource.se>
OK
I'll add your ack too, if you don't mind. :-)
Thanks,
Rafael
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox