* [PATCH 11/20] ARM: mach-shmobile: R-Mobile A1 support.
From: Kuninori Morimoto @ 2011-11-11 2:45 UTC (permalink / raw)
To: linux-sh
This adds preliminary support for the R8A7740 (R-Mobile A1) CPU
Timer, serial, gic, clock are supported at this point.
This patch is based on v0.1 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/Kconfig | 7 +
arch/arm/mach-shmobile/Makefile | 2 +
arch/arm/mach-shmobile/clock-r8a7740.c | 378 ++++++++++++++++
arch/arm/mach-shmobile/include/mach/common.h | 6 +
arch/arm/mach-shmobile/include/mach/r8a7740.h | 584 +++++++++++++++++++++++++
arch/arm/mach-shmobile/intc-r8a7740.c | 45 ++
arch/arm/mach-shmobile/setup-r8a7740.c | 246 +++++++++++
drivers/tty/serial/sh-sci.h | 4 +-
8 files changed, 1271 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-shmobile/clock-r8a7740.c
create mode 100644 arch/arm/mach-shmobile/include/mach/r8a7740.h
create mode 100644 arch/arm/mach-shmobile/intc-r8a7740.c
create mode 100644 arch/arm/mach-shmobile/setup-r8a7740.c
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 0828fab..329a3cb 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -28,6 +28,13 @@ config ARCH_SH73A0
select ARM_GIC
select I2C
+config ARCH_R8A7740
+ bool "R-Mobile A1 (R8A77400)"
+ select CPU_V7
+ select SH_CLK_CPG
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_GIC
+
comment "SH-Mobile Board Type"
config MACH_G3EVM
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 2aec2f7..d61f1ec 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o
obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7377.o intc-sh7377.o
obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o
obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
+obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
# SMP objects
smp-y := platsmp.o headsmp.o
@@ -29,6 +30,7 @@ obj-$(CONFIG_ARCH_SH7367) += entry-intc.o
obj-$(CONFIG_ARCH_SH7377) += entry-intc.o
obj-$(CONFIG_ARCH_SH7372) += entry-intc.o
obj-$(CONFIG_ARCH_SH73A0) += entry-gic.o
+obj-$(CONFIG_ARCH_R8A7740) += entry-gic.o
# PM objects
obj-$(CONFIG_SUSPEND) += suspend.o
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
new file mode 100644
index 0000000..5bb02f2
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -0,0 +1,378 @@
+/*
+ * R8A7740 processor support
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+#include <mach/r8a7740.h>
+
+/*
+ * | MDx | XTAL1/EXTAL1 | System | EXTALR |
+ * Clock |-------+-----------------+ clock | 32.768 | RCLK
+ * Mode | 2/1/0 | src MHz | source | KHz | source
+ * -------+-------+-----------------+-----------+--------+----------
+ * 0 | 0 0 0 | External 20~50 | XTAL1 | O | EXTALR
+ * 1 | 0 0 1 | Crystal 20~30 | XTAL1 | O | EXTALR
+ * 2 | 0 1 0 | External 40~50 | XTAL1 / 2 | O | EXTALR
+ * 3 | 0 1 1 | Crystal 40~50 | XTAL1 / 2 | O | EXTALR
+ * 4 | 1 0 0 | External 20~50 | XTAL1 | x | XTAL1 / 1024
+ * 5 | 1 0 1 | Crystal 20~30 | XTAL1 | x | XTAL1 / 1024
+ * 6 | 1 1 0 | External 40~50 | XTAL1 / 2 | x | XTAL1 / 2048
+ * 7 | 1 1 1 | Crystal 40~50 | XTAL1 / 2 | x | XTAL1 / 2048
+ */
+
+/* CPG registers */
+#define FRQCRA 0xe6150000
+#define FRQCRB 0xe6150004
+#define FRQCRC 0xe61500e0
+#define PLLC01CR 0xe6150028
+
+#define SUBCKCR 0xe6150080
+
+#define MSTPSR0 0xe6150030
+#define MSTPSR1 0xe6150038
+#define MSTPSR2 0xe6150040
+#define MSTPSR3 0xe6150048
+#define MSTPSR4 0xe615004c
+#define SMSTPCR0 0xe6150130
+#define SMSTPCR1 0xe6150134
+#define SMSTPCR2 0xe6150138
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR4 0xe6150140
+
+/* Fixed 32 KHz root clock from EXTALR pin */
+static struct clk extalr_clk = {
+ .rate = 32768,
+};
+
+/*
+ * 25MHz default rate for the EXTAL1 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+static struct clk extal1_clk = {
+ .rate = 25000000,
+};
+
+/*
+ * 48MHz default rate for the EXTAL2 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+static struct clk extal2_clk = {
+ .rate = 48000000,
+};
+
+/*
+ * 27MHz default rate for the DV_CLKI root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+static struct clk dv_clk = {
+ .rate = 27000000,
+};
+
+static unsigned long div_recalc(struct clk *clk)
+{
+ return clk->parent->rate / (int)(clk->priv);
+}
+
+static struct clk_ops div_clk_ops = {
+ .recalc = div_recalc,
+};
+
+/* extal1 / 2 */
+static struct clk extal1_div2_clk = {
+ .ops = &div_clk_ops,
+ .priv = (void *)2,
+ .parent = &extal1_clk,
+};
+
+/* extal1 / 1024 */
+static struct clk extal1_div1024_clk = {
+ .ops = &div_clk_ops,
+ .priv = (void *)1024,
+ .parent = &extal1_clk,
+};
+
+/* extal1 / 2 / 1024 */
+static struct clk extal1_div2048_clk = {
+ .ops = &div_clk_ops,
+ .priv = (void *)1024,
+ .parent = &extal1_div2_clk,
+};
+
+/* extal2 / 2 */
+static struct clk extal2_div2_clk = {
+ .ops = &div_clk_ops,
+ .priv = (void *)2,
+ .parent = &extal2_clk,
+};
+
+static struct clk_ops followparent_clk_ops = {
+ .recalc = followparent_recalc,
+};
+
+/* Main clock */
+static struct clk system_clk = {
+ .ops = &followparent_clk_ops,
+};
+
+static struct clk system_div2_clk = {
+ .ops = &div_clk_ops,
+ .priv = (void *)2,
+ .parent = &system_clk,
+};
+
+/* r_clk */
+static struct clk r_clk = {
+ .ops = &followparent_clk_ops,
+};
+
+/* PLLC0/PLLC1 */
+static unsigned long pllc01_recalc(struct clk *clk)
+{
+ unsigned long mult = 1;
+
+ if (__raw_readl(PLLC01CR) & (1 << 14))
+ mult = ((__raw_readl(clk->enable_reg) >> 24) & 0x7f) + 1;
+
+ return clk->parent->rate * mult;
+}
+
+static struct clk_ops pllc01_clk_ops = {
+ .recalc = pllc01_recalc,
+};
+
+static struct clk pllc0_clk = {
+ .ops = &pllc01_clk_ops,
+ .flags = CLK_ENABLE_ON_INIT,
+ .parent = &system_clk,
+ .enable_reg = (void __iomem *)FRQCRC,
+};
+
+static struct clk pllc1_clk = {
+ .ops = &pllc01_clk_ops,
+ .flags = CLK_ENABLE_ON_INIT,
+ .parent = &system_div2_clk,
+ .enable_reg = (void __iomem *)FRQCRA,
+};
+
+/* PLLC1 / 2 */
+static struct clk pllc1_div2_clk = {
+ .ops = &div_clk_ops,
+ .priv = (void *)2,
+ .parent = &pllc1_clk,
+};
+
+struct clk *main_clks[] = {
+ &extalr_clk,
+ &extal1_clk,
+ &extal2_clk,
+ &extal1_div2_clk,
+ &extal1_div1024_clk,
+ &extal1_div2048_clk,
+ &extal2_div2_clk,
+ &dv_clk,
+ &system_clk,
+ &system_div2_clk,
+ &r_clk,
+ &pllc0_clk,
+ &pllc1_clk,
+ &pllc1_div2_clk,
+};
+
+static void div4_kick(struct clk *clk)
+{
+ unsigned long value;
+
+ /* set KICK bit in FRQCRB to update hardware setting */
+ value = __raw_readl(FRQCRB);
+ value |= (1 << 31);
+ __raw_writel(value, FRQCRB);
+}
+
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
+ 24, 32, 36, 48, 0, 72, 96, 0 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+ .divisors = divisors,
+ .nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+ .kick = div4_kick,
+};
+
+enum {
+ DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
+ DIV4_HPP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
+ DIV4_NR
+};
+
+struct clk div4_clks[DIV4_NR] = {
+ [DIV4_I] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_ZG] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_B] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_M1] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
+ [DIV4_HP] = SH_CLK_DIV4(&pllc1_clk, FRQCRB, 4, 0x6fff, 0),
+ [DIV4_HPP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
+ [DIV4_S] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
+ [DIV4_ZB] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 8, 0x6fff, 0),
+ [DIV4_M3] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 4, 0x6fff, 0),
+ [DIV4_CP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 0, 0x6fff, 0),
+};
+
+enum {
+ DIV6_SUB,
+ DIV6_NR
+};
+
+static struct clk div6_clks[DIV6_NR] = {
+ [DIV6_SUB] = SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0),
+};
+
+enum {
+ MSTP125,
+ MSTP116, MSTP111,
+
+ MSTP230,
+ MSTP222,
+ MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+
+ MSTP329, MSTP323,
+
+ MSTP_NR
+};
+
+static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
+ [MSTP116] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
+ [MSTP111] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 11, 0), /* TMU1 */
+
+ [MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 30, 0), /* SCIFA6 */
+ [MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 22, 0), /* SCIFA7 */
+ [MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
+ [MSTP206] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
+ [MSTP204] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
+ [MSTP203] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
+ [MSTP202] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
+ [MSTP201] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
+ [MSTP200] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
+
+ [MSTP329] = SH_CLK_MSTP32(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
+ [MSTP323] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
+};
+
+static struct clk_lookup lookups[] = {
+ /* main clocks */
+ CLKDEV_CON_ID("extalr", &extalr_clk),
+ CLKDEV_CON_ID("extal1", &extal1_clk),
+ CLKDEV_CON_ID("extal2", &extal2_clk),
+ CLKDEV_CON_ID("extal1_div2", &extal1_div2_clk),
+ CLKDEV_CON_ID("extal1_div1024", &extal1_div1024_clk),
+ CLKDEV_CON_ID("extal1_div2048", &extal1_div2048_clk),
+ CLKDEV_CON_ID("extal2_div2", &extal2_div2_clk),
+ CLKDEV_CON_ID("dv_clk", &dv_clk),
+ CLKDEV_CON_ID("system_clk", &system_clk),
+ CLKDEV_CON_ID("system_div2_clk", &system_div2_clk),
+ CLKDEV_CON_ID("r_clk", &r_clk),
+ CLKDEV_CON_ID("pllc0_clk", &pllc0_clk),
+ CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
+ CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
+
+ /* DIV4 clocks */
+ CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
+ CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]),
+ CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
+ CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
+ CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
+ CLKDEV_CON_ID("hpp_clk", &div4_clks[DIV4_HPP]),
+ CLKDEV_CON_ID("s_clk", &div4_clks[DIV4_S]),
+ CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
+ CLKDEV_CON_ID("m3_clk", &div4_clks[DIV4_M3]),
+ CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
+
+ /* DIV6 clocks */
+ CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
+
+ /* MSTP32 clocks */
+ CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP111]),
+ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]),
+ CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]),
+
+ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]),
+ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]),
+ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]),
+ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
+ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
+ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]),
+ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]),
+
+ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]),
+ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]),
+
+ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]),
+ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]),
+};
+
+void __init r8a7740_clock_init(u8 md_ck)
+{
+ int k, ret = 0;
+
+ /* detect system clock parent */
+ if (md_ck & MD_CK1)
+ system_clk.parent = &extal1_div2_clk;
+ else
+ system_clk.parent = &extal1_clk;
+
+ /* detect RCLK parent */
+ switch (md_ck & (MD_CK2 | MD_CK1)) {
+ case MD_CK2 | MD_CK1:
+ r_clk.parent = &extal1_div2048_clk;
+ break;
+ case MD_CK2:
+ r_clk.parent = &extal1_div1024_clk;
+ break;
+ case MD_CK1:
+ default:
+ r_clk.parent = &extalr_clk;
+ break;
+ }
+
+ for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+ ret = clk_register(main_clks[k]);
+
+ if (!ret)
+ ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+ if (!ret)
+ ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+ if (!ret)
+ ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+ if (!ret)
+ clk_init();
+ else
+ panic("failed to setup r8a7740 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index c0cdbf9..ff3754f 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -53,4 +53,10 @@ extern void sh73a0_secondary_init(unsigned int cpu);
extern int sh73a0_boot_secondary(unsigned int cpu);
extern void sh73a0_smp_prepare_cpus(void);
+extern void r8a7740_init_irq(void);
+extern void r8a7740_add_early_devices(void);
+extern void r8a7740_add_standard_devices(void);
+extern void r8a7740_clock_init(u8 md_ck);
+extern void r8a7740_pinmux_init(void);
+
#endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h
new file mode 100644
index 0000000..9d447ab
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h
@@ -0,0 +1,584 @@
+/*
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __ASM_R8A7740_H__
+#define __ASM_R8A7740_H__
+
+/*
+ * MD_CKx pin
+ */
+#define MD_CK2 (1 << 2)
+#define MD_CK1 (1 << 1)
+#define MD_CK0 (1 << 0)
+
+/*
+ * Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+ /* PORT */
+ GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+ GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+ GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+ GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+ GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+ GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+ GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+ GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+ GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+ GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+ GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+ GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+ GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+ GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+ GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+ GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+ GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+ GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+ GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+ GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+ GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+ GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+ GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+ GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
+
+ GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
+ GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
+
+ GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+ GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+ GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+ GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+ GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+ GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+ GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+ GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
+
+ GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
+ GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
+
+ GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
+ GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
+
+ GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+ GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+ GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+ GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+ GPIO_PORT210, GPIO_PORT211,
+
+ /* IRQ */
+ GPIO_FN_IRQ0_PORT2, GPIO_FN_IRQ0_PORT13,
+ GPIO_FN_IRQ1,
+ GPIO_FN_IRQ2_PORT11, GPIO_FN_IRQ2_PORT12,
+ GPIO_FN_IRQ3_PORT10, GPIO_FN_IRQ3_PORT14,
+ GPIO_FN_IRQ4_PORT15, GPIO_FN_IRQ4_PORT172,
+ GPIO_FN_IRQ5_PORT0, GPIO_FN_IRQ5_PORT1,
+ GPIO_FN_IRQ6_PORT121, GPIO_FN_IRQ6_PORT173,
+ GPIO_FN_IRQ7_PORT120, GPIO_FN_IRQ7_PORT209,
+ GPIO_FN_IRQ8,
+ GPIO_FN_IRQ9_PORT118, GPIO_FN_IRQ9_PORT210,
+ GPIO_FN_IRQ10,
+ GPIO_FN_IRQ11,
+ GPIO_FN_IRQ12_PORT42, GPIO_FN_IRQ12_PORT97,
+ GPIO_FN_IRQ13_PORT64, GPIO_FN_IRQ13_PORT98,
+ GPIO_FN_IRQ14_PORT63, GPIO_FN_IRQ14_PORT99,
+ GPIO_FN_IRQ15_PORT62, GPIO_FN_IRQ15_PORT100,
+ GPIO_FN_IRQ16_PORT68, GPIO_FN_IRQ16_PORT211,
+ GPIO_FN_IRQ17,
+ GPIO_FN_IRQ18,
+ GPIO_FN_IRQ19,
+ GPIO_FN_IRQ20,
+ GPIO_FN_IRQ21,
+ GPIO_FN_IRQ22,
+ GPIO_FN_IRQ23,
+ GPIO_FN_IRQ24,
+ GPIO_FN_IRQ25,
+ GPIO_FN_IRQ26_PORT58, GPIO_FN_IRQ26_PORT81,
+ GPIO_FN_IRQ27_PORT57, GPIO_FN_IRQ27_PORT168,
+ GPIO_FN_IRQ28_PORT56, GPIO_FN_IRQ28_PORT169,
+ GPIO_FN_IRQ29_PORT50, GPIO_FN_IRQ29_PORT170,
+ GPIO_FN_IRQ30_PORT49, GPIO_FN_IRQ30_PORT171,
+ GPIO_FN_IRQ31_PORT41, GPIO_FN_IRQ31_PORT167,
+
+ /* Function */
+
+ /* DBGT */
+ GPIO_FN_DBGMDT2, GPIO_FN_DBGMDT1, GPIO_FN_DBGMDT0,
+ GPIO_FN_DBGMD10, GPIO_FN_DBGMD11, GPIO_FN_DBGMD20,
+ GPIO_FN_DBGMD21,
+
+ /* FSI */
+ GPIO_FN_FSIAISLD_PORT0, /* FSIAISLD Port 0/5 */
+ GPIO_FN_FSIAISLD_PORT5,
+ GPIO_FN_FSIASPDIF_PORT9, /* FSIASPDIF Port 9/18 */
+ GPIO_FN_FSIASPDIF_PORT18,
+ GPIO_FN_FSIAOSLD1, GPIO_FN_FSIAOSLD2,
+ GPIO_FN_FSIAOLR, GPIO_FN_FSIAOBT,
+ GPIO_FN_FSIAOSLD, GPIO_FN_FSIAOMC,
+ GPIO_FN_FSIACK, GPIO_FN_FSIAILR,
+ GPIO_FN_FSIAIBT,
+
+ /* FMSI */
+ GPIO_FN_FMSISLD_PORT1, /* FMSISLD Port 1/6 */
+ GPIO_FN_FMSISLD_PORT6,
+ GPIO_FN_FMSIILR, GPIO_FN_FMSIIBT,
+ GPIO_FN_FMSIOLR, GPIO_FN_FMSIOBT,
+ GPIO_FN_FMSICK, GPIO_FN_FMSOILR,
+ GPIO_FN_FMSOIBT, GPIO_FN_FMSOOLR,
+ GPIO_FN_FMSOOBT, GPIO_FN_FMSOSLD,
+ GPIO_FN_FMSOCK,
+
+ /* SCIFA0 */
+ GPIO_FN_SCIFA0_SCK, GPIO_FN_SCIFA0_CTS,
+ GPIO_FN_SCIFA0_RTS, GPIO_FN_SCIFA0_RXD,
+ GPIO_FN_SCIFA0_TXD,
+
+ /* SCIFA1 */
+ GPIO_FN_SCIFA1_CTS, GPIO_FN_SCIFA1_SCK,
+ GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_TXD,
+ GPIO_FN_SCIFA1_RTS,
+
+ /* SCIFA2 */
+ GPIO_FN_SCIFA2_SCK_PORT22, /* SCIFA2_SCK Port 22/199 */
+ GPIO_FN_SCIFA2_SCK_PORT199,
+ GPIO_FN_SCIFA2_RXD, GPIO_FN_SCIFA2_TXD,
+ GPIO_FN_SCIFA2_CTS, GPIO_FN_SCIFA2_RTS,
+
+ /* SCIFA3 */
+ GPIO_FN_SCIFA3_RTS_PORT105, /* MSEL5CR_8_0 */
+ GPIO_FN_SCIFA3_SCK_PORT116,
+ GPIO_FN_SCIFA3_CTS_PORT117,
+ GPIO_FN_SCIFA3_RXD_PORT174,
+ GPIO_FN_SCIFA3_TXD_PORT175,
+
+ GPIO_FN_SCIFA3_RTS_PORT161, /* MSEL5CR_8_1 */
+ GPIO_FN_SCIFA3_SCK_PORT158,
+ GPIO_FN_SCIFA3_CTS_PORT162,
+ GPIO_FN_SCIFA3_RXD_PORT159,
+ GPIO_FN_SCIFA3_TXD_PORT160,
+
+ /* SCIFA4 */
+ GPIO_FN_SCIFA4_RXD_PORT12, /* MSEL5CR[12:11] = 00 */
+ GPIO_FN_SCIFA4_TXD_PORT13,
+
+ GPIO_FN_SCIFA4_RXD_PORT204, /* MSEL5CR[12:11] = 01 */
+ GPIO_FN_SCIFA4_TXD_PORT203,
+
+ GPIO_FN_SCIFA4_RXD_PORT94, /* MSEL5CR[12:11] = 10 */
+ GPIO_FN_SCIFA4_TXD_PORT93,
+
+ GPIO_FN_SCIFA4_SCK_PORT21, /* SCIFA4_SCK Port 21/205 */
+ GPIO_FN_SCIFA4_SCK_PORT205,
+
+ /* SCIFA5 */
+ GPIO_FN_SCIFA5_TXD_PORT20, /* MSEL5CR[15:14] = 00 */
+ GPIO_FN_SCIFA5_RXD_PORT10,
+
+ GPIO_FN_SCIFA5_RXD_PORT207, /* MSEL5CR[15:14] = 01 */
+ GPIO_FN_SCIFA5_TXD_PORT208,
+
+ GPIO_FN_SCIFA5_TXD_PORT91, /* MSEL5CR[15:14] = 10 */
+ GPIO_FN_SCIFA5_RXD_PORT92,
+
+ GPIO_FN_SCIFA5_SCK_PORT23, /* SCIFA5_SCK Port 23/206 */
+ GPIO_FN_SCIFA5_SCK_PORT206,
+
+ /* SCIFA6 */
+ GPIO_FN_SCIFA6_SCK, GPIO_FN_SCIFA6_RXD, GPIO_FN_SCIFA6_TXD,
+
+ /* SCIFA7 */
+ GPIO_FN_SCIFA7_TXD, GPIO_FN_SCIFA7_RXD,
+
+ /* SCIFAB */
+ GPIO_FN_SCIFB_SCK_PORT190, /* MSEL5CR_17_0 */
+ GPIO_FN_SCIFB_RXD_PORT191,
+ GPIO_FN_SCIFB_TXD_PORT192,
+ GPIO_FN_SCIFB_RTS_PORT186,
+ GPIO_FN_SCIFB_CTS_PORT187,
+
+ GPIO_FN_SCIFB_SCK_PORT2, /* MSEL5CR_17_1 */
+ GPIO_FN_SCIFB_RXD_PORT3,
+ GPIO_FN_SCIFB_TXD_PORT4,
+ GPIO_FN_SCIFB_RTS_PORT172,
+ GPIO_FN_SCIFB_CTS_PORT173,
+
+ /* LCD0 */
+ GPIO_FN_LCDC0_SELECT,
+ GPIO_FN_LCD0_D0, GPIO_FN_LCD0_D1, GPIO_FN_LCD0_D2,
+ GPIO_FN_LCD0_D3, GPIO_FN_LCD0_D4, GPIO_FN_LCD0_D5,
+ GPIO_FN_LCD0_D6, GPIO_FN_LCD0_D7, GPIO_FN_LCD0_D8,
+ GPIO_FN_LCD0_D9, GPIO_FN_LCD0_D10, GPIO_FN_LCD0_D11,
+ GPIO_FN_LCD0_D12, GPIO_FN_LCD0_D13, GPIO_FN_LCD0_D14,
+ GPIO_FN_LCD0_D15, GPIO_FN_LCD0_D16, GPIO_FN_LCD0_D17,
+ GPIO_FN_LCD0_DON, GPIO_FN_LCD0_VCPWC, GPIO_FN_LCD0_VEPWC,
+
+ GPIO_FN_LCD0_DCK, GPIO_FN_LCD0_VSYN, /* for RGB */
+ GPIO_FN_LCD0_HSYN, GPIO_FN_LCD0_DISP, /* for RGB */
+
+ GPIO_FN_LCD0_WR, GPIO_FN_LCD0_RD, /* for SYS */
+ GPIO_FN_LCD0_CS, GPIO_FN_LCD0_RS, /* for SYS */
+
+ GPIO_FN_LCD0_D18_PORT163, GPIO_FN_LCD0_D19_PORT162,
+ GPIO_FN_LCD0_D20_PORT161, GPIO_FN_LCD0_D21_PORT158,
+ GPIO_FN_LCD0_D22_PORT160, GPIO_FN_LCD0_D23_PORT159,
+ GPIO_FN_LCD0_LCLK_PORT165, /* MSEL5CR_6_1 */
+
+ GPIO_FN_LCD0_D18_PORT40, GPIO_FN_LCD0_D19_PORT4,
+ GPIO_FN_LCD0_D20_PORT3, GPIO_FN_LCD0_D21_PORT2,
+ GPIO_FN_LCD0_D22_PORT0, GPIO_FN_LCD0_D23_PORT1,
+ GPIO_FN_LCD0_LCLK_PORT102, /* MSEL5CR_6_0 */
+
+ /* LCD1 */
+ GPIO_FN_LCDC1_SELECT,
+ GPIO_FN_LCD1_D0, GPIO_FN_LCD1_D1, GPIO_FN_LCD1_D2,
+ GPIO_FN_LCD1_D3, GPIO_FN_LCD1_D4, GPIO_FN_LCD1_D5,
+ GPIO_FN_LCD1_D6, GPIO_FN_LCD1_D7, GPIO_FN_LCD1_D8,
+ GPIO_FN_LCD1_D9, GPIO_FN_LCD1_D10, GPIO_FN_LCD1_D11,
+ GPIO_FN_LCD1_D12, GPIO_FN_LCD1_D13, GPIO_FN_LCD1_D14,
+ GPIO_FN_LCD1_D15, GPIO_FN_LCD1_D16, GPIO_FN_LCD1_D17,
+ GPIO_FN_LCD1_D18, GPIO_FN_LCD1_D19, GPIO_FN_LCD1_D20,
+ GPIO_FN_LCD1_D21, GPIO_FN_LCD1_D22, GPIO_FN_LCD1_D23,
+ GPIO_FN_LCD1_DON, GPIO_FN_LCD1_VCPWC,
+ GPIO_FN_LCD1_LCLK, GPIO_FN_LCD1_VEPWC,
+
+ GPIO_FN_LCD1_DCK, GPIO_FN_LCD1_VSYN, /* for RGB */
+ GPIO_FN_LCD1_HSYN, GPIO_FN_LCD1_DISP, /* for RGB */
+
+ GPIO_FN_LCD1_WR, GPIO_FN_LCD1_RD, /* for SYS */
+ GPIO_FN_LCD1_CS, GPIO_FN_LCD1_RS, /* for SYS */
+
+ /* RSPI */
+ GPIO_FN_RSPI_SSL0_A, GPIO_FN_RSPI_SSL1_A,
+ GPIO_FN_RSPI_SSL2_A, GPIO_FN_RSPI_SSL3_A,
+ GPIO_FN_RSPI_MOSI_A, GPIO_FN_RSPI_MISO_A,
+ GPIO_FN_RSPI_CK_A,
+
+ /* VIO CKO */
+ GPIO_FN_VIO_CKO1,
+ GPIO_FN_VIO_CKO2,
+ GPIO_FN_VIO_CKO_1,
+ GPIO_FN_VIO_CKO,
+
+ /* VIO0 */
+ GPIO_FN_VIO0_D0, GPIO_FN_VIO0_D1, GPIO_FN_VIO0_D2,
+ GPIO_FN_VIO0_D3, GPIO_FN_VIO0_D4, GPIO_FN_VIO0_D5,
+ GPIO_FN_VIO0_D6, GPIO_FN_VIO0_D7, GPIO_FN_VIO0_D8,
+ GPIO_FN_VIO0_D9, GPIO_FN_VIO0_D10, GPIO_FN_VIO0_D11,
+ GPIO_FN_VIO0_D12, GPIO_FN_VIO0_VD, GPIO_FN_VIO0_HD,
+ GPIO_FN_VIO0_CLK, GPIO_FN_VIO0_FIELD,
+
+ GPIO_FN_VIO0_D13_PORT26, /* MSEL5CR_27_0 */
+ GPIO_FN_VIO0_D14_PORT25,
+ GPIO_FN_VIO0_D15_PORT24,
+
+ GPIO_FN_VIO0_D13_PORT22, /* MSEL5CR_27_1 */
+ GPIO_FN_VIO0_D14_PORT95,
+ GPIO_FN_VIO0_D15_PORT96,
+
+ /* VIO1 */
+ GPIO_FN_VIO1_D0, GPIO_FN_VIO1_D1, GPIO_FN_VIO1_D2,
+ GPIO_FN_VIO1_D3, GPIO_FN_VIO1_D4, GPIO_FN_VIO1_D5,
+ GPIO_FN_VIO1_D6, GPIO_FN_VIO1_D7, GPIO_FN_VIO1_VD,
+ GPIO_FN_VIO1_HD, GPIO_FN_VIO1_CLK, GPIO_FN_VIO1_FIELD,
+
+ /* TPU0 */
+ GPIO_FN_TPU0TO0, GPIO_FN_TPU0TO1,
+ GPIO_FN_TPU0TO3,
+ GPIO_FN_TPU0TO2_PORT66, /* TPU0TO2 Port 66/202 */
+ GPIO_FN_TPU0TO2_PORT202,
+
+ /* SSP1 0 */
+ GPIO_FN_STP0_IPD0, GPIO_FN_STP0_IPD1, GPIO_FN_STP0_IPD2,
+ GPIO_FN_STP0_IPD3, GPIO_FN_STP0_IPD4, GPIO_FN_STP0_IPD5,
+ GPIO_FN_STP0_IPD6, GPIO_FN_STP0_IPD7, GPIO_FN_STP0_IPEN,
+ GPIO_FN_STP0_IPCLK, GPIO_FN_STP0_IPSYNC,
+
+ /* SSP1 1 */
+ GPIO_FN_STP1_IPD1, GPIO_FN_STP1_IPD2, GPIO_FN_STP1_IPD3,
+ GPIO_FN_STP1_IPD4, GPIO_FN_STP1_IPD5, GPIO_FN_STP1_IPD6,
+ GPIO_FN_STP1_IPD7, GPIO_FN_STP1_IPCLK, GPIO_FN_STP1_IPSYNC,
+
+ GPIO_FN_STP1_IPD0_PORT186, /* MSEL5CR_23_0 */
+ GPIO_FN_STP1_IPEN_PORT187,
+
+ GPIO_FN_STP1_IPD0_PORT194, /* MSEL5CR_23_1 */
+ GPIO_FN_STP1_IPEN_PORT193,
+
+ /* SIM */
+ GPIO_FN_SIM_RST, GPIO_FN_SIM_CLK,
+ GPIO_FN_SIM_D_PORT22, /* SIM_D Port 22/199 */
+ GPIO_FN_SIM_D_PORT199,
+
+ /* SDHI0 */
+ GPIO_FN_SDHI0_D0, GPIO_FN_SDHI0_D1, GPIO_FN_SDHI0_D2,
+ GPIO_FN_SDHI0_D3, GPIO_FN_SDHI0_CD, GPIO_FN_SDHI0_WP,
+ GPIO_FN_SDHI0_CMD, GPIO_FN_SDHI0_CLK,
+
+ /* SDHI1 */
+ GPIO_FN_SDHI1_D0, GPIO_FN_SDHI1_D1, GPIO_FN_SDHI1_D2,
+ GPIO_FN_SDHI1_D3, GPIO_FN_SDHI1_CD, GPIO_FN_SDHI1_WP,
+ GPIO_FN_SDHI1_CMD, GPIO_FN_SDHI1_CLK,
+
+ /* SDHI2 */
+ GPIO_FN_SDHI2_D0, GPIO_FN_SDHI2_D1, GPIO_FN_SDHI2_D2,
+ GPIO_FN_SDHI2_D3, GPIO_FN_SDHI2_CLK, GPIO_FN_SDHI2_CMD,
+
+ GPIO_FN_SDHI2_CD_PORT24, /* MSEL5CR_19_0 */
+ GPIO_FN_SDHI2_WP_PORT25,
+
+ GPIO_FN_SDHI2_WP_PORT177, /* MSEL5CR_19_1 */
+ GPIO_FN_SDHI2_CD_PORT202,
+
+ /* MSIOF2 */
+ GPIO_FN_MSIOF2_TXD, GPIO_FN_MSIOF2_RXD, GPIO_FN_MSIOF2_TSCK,
+ GPIO_FN_MSIOF2_SS2, GPIO_FN_MSIOF2_TSYNC, GPIO_FN_MSIOF2_SS1,
+ GPIO_FN_MSIOF2_MCK1, GPIO_FN_MSIOF2_MCK0, GPIO_FN_MSIOF2_RSYNC,
+ GPIO_FN_MSIOF2_RSCK,
+
+ /* KEYSC */
+ GPIO_FN_KEYIN4, GPIO_FN_KEYIN5,
+ GPIO_FN_KEYIN6, GPIO_FN_KEYIN7,
+ GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2,
+ GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4, GPIO_FN_KEYOUT5,
+ GPIO_FN_KEYOUT6, GPIO_FN_KEYOUT7,
+
+ GPIO_FN_KEYIN0_PORT43, /* MSEL4CR_18_0 */
+ GPIO_FN_KEYIN1_PORT44,
+ GPIO_FN_KEYIN2_PORT45,
+ GPIO_FN_KEYIN3_PORT46,
+
+ GPIO_FN_KEYIN0_PORT58, /* MSEL4CR_18_1 */
+ GPIO_FN_KEYIN1_PORT57,
+ GPIO_FN_KEYIN2_PORT56,
+ GPIO_FN_KEYIN3_PORT55,
+
+ /* VOU */
+ GPIO_FN_DV_D0, GPIO_FN_DV_D1, GPIO_FN_DV_D2, GPIO_FN_DV_D3,
+ GPIO_FN_DV_D4, GPIO_FN_DV_D5, GPIO_FN_DV_D6, GPIO_FN_DV_D7,
+ GPIO_FN_DV_D8, GPIO_FN_DV_D9, GPIO_FN_DV_D10, GPIO_FN_DV_D11,
+ GPIO_FN_DV_D12, GPIO_FN_DV_D13, GPIO_FN_DV_D14, GPIO_FN_DV_D15,
+ GPIO_FN_DV_CLK,
+ GPIO_FN_DV_VSYNC,
+ GPIO_FN_DV_HSYNC,
+
+ /* MEMC */
+ GPIO_FN_MEMC_AD0, GPIO_FN_MEMC_AD1, GPIO_FN_MEMC_AD2,
+ GPIO_FN_MEMC_AD3, GPIO_FN_MEMC_AD4, GPIO_FN_MEMC_AD5,
+ GPIO_FN_MEMC_AD6, GPIO_FN_MEMC_AD7, GPIO_FN_MEMC_AD8,
+ GPIO_FN_MEMC_AD9, GPIO_FN_MEMC_AD10, GPIO_FN_MEMC_AD11,
+ GPIO_FN_MEMC_AD12, GPIO_FN_MEMC_AD13, GPIO_FN_MEMC_AD14,
+ GPIO_FN_MEMC_AD15, GPIO_FN_MEMC_CS0, GPIO_FN_MEMC_INT,
+ GPIO_FN_MEMC_NWE, GPIO_FN_MEMC_NOE,
+
+ GPIO_FN_MEMC_CS1, /* MSEL4CR_6_0 */
+ GPIO_FN_MEMC_ADV,
+ GPIO_FN_MEMC_WAIT,
+ GPIO_FN_MEMC_BUSCLK,
+
+ GPIO_FN_MEMC_A1, /* MSEL4CR_6_1 */
+ GPIO_FN_MEMC_DREQ0,
+ GPIO_FN_MEMC_DREQ1,
+ GPIO_FN_MEMC_A0,
+
+ /* MMC */
+ GPIO_FN_MMC0_D0_PORT68, GPIO_FN_MMC0_D1_PORT69,
+ GPIO_FN_MMC0_D2_PORT70, GPIO_FN_MMC0_D3_PORT71,
+ GPIO_FN_MMC0_D4_PORT72, GPIO_FN_MMC0_D5_PORT73,
+ GPIO_FN_MMC0_D6_PORT74, GPIO_FN_MMC0_D7_PORT75,
+ GPIO_FN_MMC0_CLK_PORT66,
+ GPIO_FN_MMC0_CMD_PORT67, /* MSEL4CR_15_0 */
+
+ GPIO_FN_MMC1_D0_PORT149, GPIO_FN_MMC1_D1_PORT148,
+ GPIO_FN_MMC1_D2_PORT147, GPIO_FN_MMC1_D3_PORT146,
+ GPIO_FN_MMC1_D4_PORT145, GPIO_FN_MMC1_D5_PORT144,
+ GPIO_FN_MMC1_D6_PORT143, GPIO_FN_MMC1_D7_PORT142,
+ GPIO_FN_MMC1_CLK_PORT103,
+ GPIO_FN_MMC1_CMD_PORT104, /* MSEL4CR_15_1 */
+
+ /* MSIOF0 */
+ GPIO_FN_MSIOF0_SS1, GPIO_FN_MSIOF0_SS2,
+ GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_TXD,
+ GPIO_FN_MSIOF0_MCK0, GPIO_FN_MSIOF0_MCK1,
+ GPIO_FN_MSIOF0_RSYNC, GPIO_FN_MSIOF0_RSCK,
+ GPIO_FN_MSIOF0_TSCK, GPIO_FN_MSIOF0_TSYNC,
+
+ /* MSIOF1 */
+ GPIO_FN_MSIOF1_RSCK, GPIO_FN_MSIOF1_RSYNC,
+ GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1,
+
+ GPIO_FN_MSIOF1_SS2_PORT116, GPIO_FN_MSIOF1_SS1_PORT117,
+ GPIO_FN_MSIOF1_RXD_PORT118, GPIO_FN_MSIOF1_TXD_PORT119,
+ GPIO_FN_MSIOF1_TSYNC_PORT120,
+ GPIO_FN_MSIOF1_TSCK_PORT121, /* MSEL4CR_10_0 */
+
+ GPIO_FN_MSIOF1_SS1_PORT67, GPIO_FN_MSIOF1_TSCK_PORT72,
+ GPIO_FN_MSIOF1_TSYNC_PORT73, GPIO_FN_MSIOF1_TXD_PORT74,
+ GPIO_FN_MSIOF1_RXD_PORT75,
+ GPIO_FN_MSIOF1_SS2_PORT202, /* MSEL4CR_10_1 */
+
+ /* GPIO */
+ GPIO_FN_GPO0, GPIO_FN_GPI0,
+ GPIO_FN_GPO1, GPIO_FN_GPI1,
+
+ /* USB0 */
+ GPIO_FN_USB0_OCI, GPIO_FN_USB0_PPON, GPIO_FN_VBUS,
+
+ /* USB1 */
+ GPIO_FN_USB1_OCI, GPIO_FN_USB1_PPON,
+
+ /* BBIF1 */
+ GPIO_FN_BBIF1_RXD, GPIO_FN_BBIF1_TXD, GPIO_FN_BBIF1_TSYNC,
+ GPIO_FN_BBIF1_TSCK, GPIO_FN_BBIF1_RSCK, GPIO_FN_BBIF1_RSYNC,
+ GPIO_FN_BBIF1_FLOW, GPIO_FN_BBIF1_RX_FLOW_N,
+
+ /* BBIF2 */
+ GPIO_FN_BBIF2_TXD2_PORT5, /* MSEL5CR_0_0 */
+ GPIO_FN_BBIF2_RXD2_PORT60,
+ GPIO_FN_BBIF2_TSYNC2_PORT6,
+ GPIO_FN_BBIF2_TSCK2_PORT59,
+
+ GPIO_FN_BBIF2_RXD2_PORT90, /* MSEL5CR_0_1 */
+ GPIO_FN_BBIF2_TXD2_PORT183,
+ GPIO_FN_BBIF2_TSCK2_PORT89,
+ GPIO_FN_BBIF2_TSYNC2_PORT184,
+
+ /* BSC / FLCTL / PCMCIA */
+ GPIO_FN_CS0, GPIO_FN_CS2, GPIO_FN_CS4,
+ GPIO_FN_CS5B, GPIO_FN_CS6A,
+ GPIO_FN_CS5A_PORT105, /* CS5A PORT 19/105 */
+ GPIO_FN_CS5A_PORT19,
+ GPIO_FN_IOIS16, /* ? */
+
+ GPIO_FN_A0, GPIO_FN_A1, GPIO_FN_A2, GPIO_FN_A3,
+ GPIO_FN_A4_FOE, /* share with FLCTL */
+ GPIO_FN_A5_FCDE, /* share with FLCTL */
+ GPIO_FN_A6, GPIO_FN_A7, GPIO_FN_A8, GPIO_FN_A9,
+ GPIO_FN_A10, GPIO_FN_A11, GPIO_FN_A12, GPIO_FN_A13,
+ GPIO_FN_A14, GPIO_FN_A15, GPIO_FN_A16, GPIO_FN_A17,
+ GPIO_FN_A18, GPIO_FN_A19, GPIO_FN_A20, GPIO_FN_A21,
+ GPIO_FN_A22, GPIO_FN_A23, GPIO_FN_A24, GPIO_FN_A25,
+ GPIO_FN_A26,
+
+ GPIO_FN_D0_NAF0, GPIO_FN_D1_NAF1, /* share with FLCTL */
+ GPIO_FN_D2_NAF2, GPIO_FN_D3_NAF3, /* share with FLCTL */
+ GPIO_FN_D4_NAF4, GPIO_FN_D5_NAF5, /* share with FLCTL */
+ GPIO_FN_D6_NAF6, GPIO_FN_D7_NAF7, /* share with FLCTL */
+ GPIO_FN_D8_NAF8, GPIO_FN_D9_NAF9, /* share with FLCTL */
+ GPIO_FN_D10_NAF10, GPIO_FN_D11_NAF11, /* share with FLCTL */
+ GPIO_FN_D12_NAF12, GPIO_FN_D13_NAF13, /* share with FLCTL */
+ GPIO_FN_D14_NAF14, GPIO_FN_D15_NAF15, /* share with FLCTL */
+
+ GPIO_FN_D16, GPIO_FN_D17, GPIO_FN_D18, GPIO_FN_D19,
+ GPIO_FN_D20, GPIO_FN_D21, GPIO_FN_D22, GPIO_FN_D23,
+ GPIO_FN_D24, GPIO_FN_D25, GPIO_FN_D26, GPIO_FN_D27,
+ GPIO_FN_D28, GPIO_FN_D29, GPIO_FN_D30, GPIO_FN_D31,
+
+ GPIO_FN_WE0_FWE, /* share with FLCTL */
+ GPIO_FN_WE1,
+ GPIO_FN_WE2_ICIORD, /* share with PCMCIA */
+ GPIO_FN_WE3_ICIOWR, /* share with PCMCIA */
+ GPIO_FN_CKO, GPIO_FN_BS, GPIO_FN_RDWR,
+ GPIO_FN_RD_FSC, /* share with FLCTL */
+ GPIO_FN_WAIT_PORT177, /* WAIT Port 90/177 */
+ GPIO_FN_WAIT_PORT90,
+
+ GPIO_FN_FCE0, GPIO_FN_FCE1, GPIO_FN_FRB, /* FLCTL */
+
+ /* IRDA */
+ GPIO_FN_IRDA_FIRSEL, GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT,
+
+ /* ATAPI */
+ GPIO_FN_IDE_D0, GPIO_FN_IDE_D1, GPIO_FN_IDE_D2,
+ GPIO_FN_IDE_D3, GPIO_FN_IDE_D4, GPIO_FN_IDE_D5,
+ GPIO_FN_IDE_D6, GPIO_FN_IDE_D7, GPIO_FN_IDE_D8,
+ GPIO_FN_IDE_D9, GPIO_FN_IDE_D10, GPIO_FN_IDE_D11,
+ GPIO_FN_IDE_D12, GPIO_FN_IDE_D13, GPIO_FN_IDE_D14,
+ GPIO_FN_IDE_D15, GPIO_FN_IDE_A0, GPIO_FN_IDE_A1,
+ GPIO_FN_IDE_A2, GPIO_FN_IDE_CS0, GPIO_FN_IDE_CS1,
+ GPIO_FN_IDE_IOWR, GPIO_FN_IDE_IORD, GPIO_FN_IDE_IORDY,
+ GPIO_FN_IDE_INT, GPIO_FN_IDE_RST, GPIO_FN_IDE_DIRECTION,
+ GPIO_FN_IDE_EXBUF_ENB, GPIO_FN_IDE_IODACK, GPIO_FN_IDE_IODREQ,
+
+ /* RMII */
+ GPIO_FN_RMII_CRS_DV, GPIO_FN_RMII_RX_ER, GPIO_FN_RMII_RXD0,
+ GPIO_FN_RMII_RXD1, GPIO_FN_RMII_TX_EN, GPIO_FN_RMII_TXD0,
+ GPIO_FN_RMII_MDC, GPIO_FN_RMII_TXD1, GPIO_FN_RMII_MDIO,
+ GPIO_FN_RMII_REF50CK, /* for RMII */
+ GPIO_FN_RMII_REF125CK, /* for GMII */
+
+ /* GEther */
+ GPIO_FN_ET_TX_CLK, GPIO_FN_ET_TX_EN, GPIO_FN_ET_ETXD0,
+ GPIO_FN_ET_ETXD1, GPIO_FN_ET_ETXD2, GPIO_FN_ET_ETXD3,
+ GPIO_FN_ET_ETXD4, GPIO_FN_ET_ETXD5, /* for GEther */
+ GPIO_FN_ET_ETXD6, GPIO_FN_ET_ETXD7, /* for GEther */
+ GPIO_FN_ET_COL, GPIO_FN_ET_TX_ER,
+ GPIO_FN_ET_RX_CLK, GPIO_FN_ET_RX_DV,
+ GPIO_FN_ET_ERXD0, GPIO_FN_ET_ERXD1,
+ GPIO_FN_ET_ERXD2, GPIO_FN_ET_ERXD3,
+ GPIO_FN_ET_ERXD4, GPIO_FN_ET_ERXD5, /* for GEther */
+ GPIO_FN_ET_ERXD6, GPIO_FN_ET_ERXD7, /* for GEther */
+ GPIO_FN_ET_RX_ER, GPIO_FN_ET_CRS,
+ GPIO_FN_ET_MDC, GPIO_FN_ET_MDIO,
+ GPIO_FN_ET_LINK, GPIO_FN_ET_PHY_INT,
+ GPIO_FN_ET_WOL, GPIO_FN_ET_GTX_CLK,
+
+ /* DMA0 */
+ GPIO_FN_DREQ0, GPIO_FN_DACK0,
+
+ /* DMA1 */
+ GPIO_FN_DREQ1, GPIO_FN_DACK1,
+
+ /* SYSC */
+ GPIO_FN_RESETOUTS,
+ GPIO_FN_RESETP_PULLUP,
+ GPIO_FN_RESETP_PLAIN,
+
+ /* SDENC */
+ GPIO_FN_SDENC_CPG,
+ GPIO_FN_SDENC_DV_CLKI,
+
+ /* IRREM */
+ GPIO_FN_IROUT,
+
+ /* DEBUG */
+ GPIO_FN_EDEBGREQ_PULLDOWN,
+ GPIO_FN_EDEBGREQ_PULLUP,
+
+ GPIO_FN_TRACEAUD_FROM_VIO,
+ GPIO_FN_TRACEAUD_FROM_LCDC0,
+ GPIO_FN_TRACEAUD_FROM_MEMC,
+};
+
+#endif /* __ASM_R8A7740_H__ */
diff --git a/arch/arm/mach-shmobile/intc-r8a7740.c b/arch/arm/mach-shmobile/intc-r8a7740.c
new file mode 100644
index 0000000..c62a205
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-r8a7740.c
@@ -0,0 +1,45 @@
+/*
+ * R8A7740 processor support
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/hardware/gic.h>
+
+#define INTA_CTRL 0xe605807c
+
+static int r8a7740_set_wake(struct irq_data *data, unsigned int on)
+{
+ return 0; /* always allow wakeup */
+}
+
+void __init r8a7740_init_irq(void)
+{
+ void __iomem *gic_dist_base = __io(0xf0001000);
+ void __iomem *gic_cpu_base = __io(0xf0000000);
+
+ /*
+ * Change INT_SEL INTCA->GIC
+ * (on GPIO)
+ */
+ __raw_writel(__raw_readl(INTA_CTRL) & ~(1 << 1), INTA_CTRL);
+
+ gic_init(0, 29, gic_dist_base, gic_cpu_base);
+ gic_arch_extn.irq_set_wake = r8a7740_set_wake;
+}
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
new file mode 100644
index 0000000..5548518
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -0,0 +1,246 @@
+/*
+ * R8A7740 processor support
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <mach/r8a7740.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+/* SCIFA0 */
+static struct plat_sci_port scif0_platform_data = {
+ .mapbase = 0xe6c40000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(100)),
+};
+
+static struct platform_device scif0_device = {
+ .name = "sh-sci",
+ .id = 0,
+ .dev = {
+ .platform_data = &scif0_platform_data,
+ },
+};
+
+/* SCIFA1 */
+static struct plat_sci_port scif1_platform_data = {
+ .mapbase = 0xe6c50000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(101)),
+};
+
+static struct platform_device scif1_device = {
+ .name = "sh-sci",
+ .id = 1,
+ .dev = {
+ .platform_data = &scif1_platform_data,
+ },
+};
+
+/* SCIFA2 */
+static struct plat_sci_port scif2_platform_data = {
+ .mapbase = 0xe6c60000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(102)),
+};
+
+static struct platform_device scif2_device = {
+ .name = "sh-sci",
+ .id = 2,
+ .dev = {
+ .platform_data = &scif2_platform_data,
+ },
+};
+
+/* SCIFA3 */
+static struct plat_sci_port scif3_platform_data = {
+ .mapbase = 0xe6c70000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(103)),
+};
+
+static struct platform_device scif3_device = {
+ .name = "sh-sci",
+ .id = 3,
+ .dev = {
+ .platform_data = &scif3_platform_data,
+ },
+};
+
+/* SCIFA4 */
+static struct plat_sci_port scif4_platform_data = {
+ .mapbase = 0xe6c80000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(104)),
+};
+
+static struct platform_device scif4_device = {
+ .name = "sh-sci",
+ .id = 4,
+ .dev = {
+ .platform_data = &scif4_platform_data,
+ },
+};
+
+/* SCIFA5 */
+static struct plat_sci_port scif5_platform_data = {
+ .mapbase = 0xe6cb0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(105)),
+};
+
+static struct platform_device scif5_device = {
+ .name = "sh-sci",
+ .id = 5,
+ .dev = {
+ .platform_data = &scif5_platform_data,
+ },
+};
+
+/* SCIFA6 */
+static struct plat_sci_port scif6_platform_data = {
+ .mapbase = 0xe6cc0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(106)),
+};
+
+static struct platform_device scif6_device = {
+ .name = "sh-sci",
+ .id = 6,
+ .dev = {
+ .platform_data = &scif6_platform_data,
+ },
+};
+
+/* SCIFA7 */
+static struct plat_sci_port scif7_platform_data = {
+ .mapbase = 0xe6cd0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFA,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(107)),
+};
+
+static struct platform_device scif7_device = {
+ .name = "sh-sci",
+ .id = 7,
+ .dev = {
+ .platform_data = &scif7_platform_data,
+ },
+};
+
+/* SCIFB */
+static struct plat_sci_port scifb_platform_data = {
+ .mapbase = 0xe6c30000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .scbrr_algo_id = SCBRR_ALGO_4,
+ .type = PORT_SCIFB,
+ .irqs = SCIx_IRQ_MUXED(gic_spi(108)),
+};
+
+static struct platform_device scifb_device = {
+ .name = "sh-sci",
+ .id = 8,
+ .dev = {
+ .platform_data = &scifb_platform_data,
+ },
+};
+
+/* CMT */
+static struct sh_timer_config cmt10_platform_data = {
+ .name = "CMT10",
+ .channel_offset = 0x10,
+ .timer_bit = 0,
+ .clockevent_rating = 125,
+ .clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+ [0] = {
+ .name = "CMT10",
+ .start = 0xe6138010,
+ .end = 0xe613801b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(58),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt10_device = {
+ .name = "sh_cmt",
+ .id = 10,
+ .dev = {
+ .platform_data = &cmt10_platform_data,
+ },
+ .resource = cmt10_resources,
+ .num_resources = ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *r8a7740_early_devices[] __initdata = {
+ &scif0_device,
+ &scif1_device,
+ &scif2_device,
+ &scif3_device,
+ &scif4_device,
+ &scif5_device,
+ &scif6_device,
+ &scif7_device,
+ &scifb_device,
+ &cmt10_device,
+};
+
+void __init r8a7740_add_standard_devices(void)
+{
+ platform_add_devices(r8a7740_early_devices,
+ ARRAY_SIZE(r8a7740_early_devices));
+}
+
+void __init r8a7740_add_early_devices(void)
+{
+ early_platform_add_devices(r8a7740_early_devices,
+ ARRAY_SIZE(r8a7740_early_devices));
+}
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index ab6be55..e9dd817 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -17,7 +17,9 @@
defined(CONFIG_ARCH_SH73A0) ||\
defined(CONFIG_ARCH_SH7367) ||\
defined(CONFIG_ARCH_SH7377) ||\
- defined(CONFIG_ARCH_SH7372)
+ defined(CONFIG_ARCH_SH7372) ||\
+ defined(CONFIG_ARCH_R8A7740)
+
# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf)
--
1.7.5.4
^ permalink raw reply related
* [PATCH 10/20] ARM: mach-shmobile: move helper macro PORTCR to sh_pfc.h
From: Kuninori Morimoto @ 2011-11-11 2:45 UTC (permalink / raw)
To: linux-sh
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/pfc-sh7367.c | 16 ----------------
arch/arm/mach-shmobile/pfc-sh7372.c | 16 ----------------
arch/arm/mach-shmobile/pfc-sh7377.c | 17 -----------------
arch/arm/mach-shmobile/pfc-sh73a0.c | 12 ------------
include/linux/sh_pfc.h | 17 +++++++++++++++++
5 files changed, 17 insertions(+), 61 deletions(-)
diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c
index 32fbf02..e6e5246 100644
--- a/arch/arm/mach-shmobile/pfc-sh7367.c
+++ b/arch/arm/mach-shmobile/pfc-sh7367.c
@@ -1287,22 +1287,6 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(DIVLOCK),
};
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out) \
- 0, (out), (in), 0, \
- 0, 0, 0, 0, \
- 0, 0, (in_pd), 0, \
- 0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg) \
- { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU, PORT##nr##_OUT), \
- PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
- PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7 } \
- }
-
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000), /* PORT0CR */
PORTCR(1, 0xe6050001), /* PORT1CR */
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 4b43626..1bd6585 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -1199,22 +1199,6 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(SDENC_DV_CLKI),
};
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out) \
- 0, (out), (in), 0, \
- 0, 0, 0, 0, \
- 0, 0, (in_pd), 0, \
- 0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg) \
- { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU, PORT##nr##_OUT), \
- PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
- PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7 } \
- }
-
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xE6051000), /* PORT0CR */
PORTCR(1, 0xE6051001), /* PORT1CR */
diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c
index fb3cfd3..2f10511 100644
--- a/arch/arm/mach-shmobile/pfc-sh7377.c
+++ b/arch/arm/mach-shmobile/pfc-sh7377.c
@@ -1300,23 +1300,6 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(RESETOUTS),
};
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out) \
- 0, (out), (in), 0, \
- 0, 0, 0, 0, \
- 0, 0, (in_pd), 0, \
- 0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg) \
- { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU, PORT##nr##_OUT), \
- PORT##nr##_FN0, PORT##nr##_FN1, \
- PORT##nr##_FN2, PORT##nr##_FN3, \
- PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7 } \
- }
-
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000), /* PORT0CR */
PORTCR(1, 0xe6050001), /* PORT1CR */
diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c
index a1ea119..e05634c 100644
--- a/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ b/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -2221,18 +2221,6 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(FSIAISLD_PU),
};
-#define PORTCR(nr, reg) \
- { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- 0, \
- /*0001*/ PORT##nr##_OUT , \
- /*0010*/ PORT##nr##_IN , 0, 0, 0, 0, 0, 0, 0, \
- /*1010*/ PORT##nr##_IN_PD, 0, 0, 0, \
- /*1110*/ PORT##nr##_IN_PU, 0, \
- PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
- PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7, 0, 0, 0, 0, 0, 0, 0, 0 } \
- }
-
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000), /* PORT0CR */
PORTCR(1, 0xe6050001), /* PORT1CR */
diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h
index 5f6322a..8446789 100644
--- a/include/linux/sh_pfc.h
+++ b/include/linux/sh_pfc.h
@@ -162,5 +162,22 @@ int unregister_pinmux(struct pinmux_info *pip);
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+/* helper macro for top 4 bits in PORTnCR */
+#define _PCRH(in, in_pd, in_pu, out) \
+ 0, (out), (in), 0, \
+ 0, 0, 0, 0, \
+ 0, 0, (in_pd), 0, \
+ 0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg) \
+ { \
+ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
+ _PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
+ PORT##nr##_IN_PU, PORT##nr##_OUT), \
+ PORT##nr##_FN0, PORT##nr##_FN1, \
+ PORT##nr##_FN2, PORT##nr##_FN3, \
+ PORT##nr##_FN4, PORT##nr##_FN5, \
+ PORT##nr##_FN6, PORT##nr##_FN7 } \
+ }
#endif /* __SH_PFC_H */
--
1.7.5.4
^ permalink raw reply related
* [PATCH 09/20] ARM: mach-shmobile: move helper macro PORT_xx to sh_pfc.h
From: Kuninori Morimoto @ 2011-11-11 2:45 UTC (permalink / raw)
To: linux-sh
This patch moves PORT_xx helper macro to sh_pfc.h,
and it expects CPU_ALL_PORT() macro for each CPU
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/pfc-sh7367.c | 71 ++++++++---------------
arch/arm/mach-shmobile/pfc-sh7372.c | 32 ++--------
arch/arm/mach-shmobile/pfc-sh7377.c | 103 +++++++++++++--------------------
arch/arm/mach-shmobile/pfc-sh73a0.c | 108 +++++++++++++++--------------------
include/linux/sh_pfc.h | 23 +++++++
5 files changed, 140 insertions(+), 197 deletions(-)
diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c
index 2518116..32fbf02 100644
--- a/arch/arm/mach-shmobile/pfc-sh7367.c
+++ b/arch/arm/mach-shmobile/pfc-sh7367.c
@@ -21,68 +21,49 @@
#include <linux/gpio.h>
#include <mach/sh7367.h>
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx) \
- _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
- _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
- _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
- _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
- _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _90(fn, pfx, sfx) \
- _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
- _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
- _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
- _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx), \
- _10(fn, pfx##9, sfx)
-
-#define _273(fn, pfx, sfx) \
- _10(fn, pfx, sfx), _90(fn, pfx, sfx), \
- _10(fn, pfx##10, sfx), _90(fn, pfx##1, sfx), \
- _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \
- _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \
- _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \
- _10(fn, pfx##26, sfx), _1(fn, pfx##270, sfx), \
- _1(fn, pfx##271, sfx), _1(fn, pfx##272, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_273(str) _273(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \
+ PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx), \
+ PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \
+ PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \
+ PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \
+ PORT_10(fn, pfx##26, sfx), PORT_1(fn, pfx##270, sfx), \
+ PORT_1(fn, pfx##271, sfx), PORT_1(fn, pfx##272, sfx)
enum {
PINMUX_RESERVED = 0,
PINMUX_DATA_BEGIN,
- PORT_273(DATA), /* PORT0_DATA -> PORT272_DATA */
+ PORT_ALL(DATA), /* PORT0_DATA -> PORT272_DATA */
PINMUX_DATA_END,
PINMUX_INPUT_BEGIN,
- PORT_273(IN), /* PORT0_IN -> PORT272_IN */
+ PORT_ALL(IN), /* PORT0_IN -> PORT272_IN */
PINMUX_INPUT_END,
PINMUX_INPUT_PULLUP_BEGIN,
- PORT_273(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
+ PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
PINMUX_INPUT_PULLUP_END,
PINMUX_INPUT_PULLDOWN_BEGIN,
- PORT_273(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
+ PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
PINMUX_INPUT_PULLDOWN_END,
PINMUX_OUTPUT_BEGIN,
- PORT_273(OUT), /* PORT0_OUT -> PORT272_OUT */
+ PORT_ALL(OUT), /* PORT0_OUT -> PORT272_OUT */
PINMUX_OUTPUT_END,
PINMUX_FUNCTION_BEGIN,
- PORT_273(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
- PORT_273(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
- PORT_273(FN0), /* PORT0_FN0 -> PORT272_FN0 */
- PORT_273(FN1), /* PORT0_FN1 -> PORT272_FN1 */
- PORT_273(FN2), /* PORT0_FN2 -> PORT272_FN2 */
- PORT_273(FN3), /* PORT0_FN3 -> PORT272_FN3 */
- PORT_273(FN4), /* PORT0_FN4 -> PORT272_FN4 */
- PORT_273(FN5), /* PORT0_FN5 -> PORT272_FN5 */
- PORT_273(FN6), /* PORT0_FN6 -> PORT272_FN6 */
- PORT_273(FN7), /* PORT0_FN7 -> PORT272_FN7 */
+ PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
+ PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
+ PORT_ALL(FN0), /* PORT0_FN0 -> PORT272_FN0 */
+ PORT_ALL(FN1), /* PORT0_FN1 -> PORT272_FN1 */
+ PORT_ALL(FN2), /* PORT0_FN2 -> PORT272_FN2 */
+ PORT_ALL(FN3), /* PORT0_FN3 -> PORT272_FN3 */
+ PORT_ALL(FN4), /* PORT0_FN4 -> PORT272_FN4 */
+ PORT_ALL(FN5), /* PORT0_FN5 -> PORT272_FN5 */
+ PORT_ALL(FN6), /* PORT0_FN6 -> PORT272_FN6 */
+ PORT_ALL(FN7), /* PORT0_FN7 -> PORT272_FN7 */
MSELBCR_MSEL2_1, MSELBCR_MSEL2_0,
PINMUX_FUNCTION_END,
@@ -1063,13 +1044,9 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1),
};
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_273() _273(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
static struct pinmux_gpio pinmux_gpios[] = {
/* 49-1 -> 49-6 (GPIO) */
- GPIO_PORT_273(),
+ GPIO_PORT_ALL(),
/* Special Pull-up / Pull-down Functions */
GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU),
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 34d6d76..4b43626 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -25,27 +25,13 @@
#include <linux/gpio.h>
#include <mach/sh7372.h>
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx) \
- _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
- _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
- _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
- _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
- _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _80(fn, pfx, sfx) \
- _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
- _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
- _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
- _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx)
-
-#define _190(fn, pfx, sfx) \
- _10(fn, pfx, sfx), _80(fn, pfx, sfx), _10(fn, pfx##9, sfx), \
- _10(fn, pfx##10, sfx), _80(fn, pfx##1, sfx), _1(fn, pfx##190, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_ALL(str) _190(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \
+ PORT_10(fn, pfx##10, sfx), PORT_10(fn, pfx##11, sfx), \
+ PORT_10(fn, pfx##12, sfx), PORT_10(fn, pfx##13, sfx), \
+ PORT_10(fn, pfx##14, sfx), PORT_10(fn, pfx##15, sfx), \
+ PORT_10(fn, pfx##16, sfx), PORT_10(fn, pfx##17, sfx), \
+ PORT_10(fn, pfx##18, sfx), PORT_1(fn, pfx##190, sfx)
enum {
PINMUX_RESERVED = 0,
@@ -942,10 +928,6 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(MFIv4_MARK, MSEL4CR_6_1),
};
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_ALL() _190(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
static struct pinmux_gpio pinmux_gpios[] = {
/* PORT */
diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c
index e4c7018..fb3cfd3 100644
--- a/arch/arm/mach-shmobile/pfc-sh7377.c
+++ b/arch/arm/mach-shmobile/pfc-sh7377.c
@@ -22,84 +22,65 @@
#include <linux/gpio.h>
#include <mach/sh7377.h>
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx) \
- _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
- _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
- _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
- _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
- _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _90(fn, pfx, sfx) \
- _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
- _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
- _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
- _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx), \
- _10(fn, pfx##9, sfx)
-
-#define _265(fn, pfx, sfx) \
- _10(fn, pfx, sfx), _90(fn, pfx, sfx), \
- _10(fn, pfx##10, sfx), \
- _1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx), \
- _1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx), \
- _1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx), \
- _1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx), \
- _1(fn, pfx##118, sfx), \
- _1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx), \
- _10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx), \
- _10(fn, pfx##15, sfx), \
- _1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx), \
- _1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx), \
- _1(fn, pfx##164, sfx), \
- _1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx), \
- _1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx), \
- _1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx), \
- _1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx), \
- _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \
- _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \
- _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \
- _1(fn, pfx##260, sfx), _1(fn, pfx##261, sfx), \
- _1(fn, pfx##262, sfx), _1(fn, pfx##263, sfx), \
- _1(fn, pfx##264, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_265(str) _265(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \
+ PORT_10(fn, pfx##10, sfx), \
+ PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \
+ PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \
+ PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \
+ PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \
+ PORT_1(fn, pfx##118, sfx), \
+ PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \
+ PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \
+ PORT_10(fn, pfx##15, sfx), \
+ PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \
+ PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \
+ PORT_1(fn, pfx##164, sfx), \
+ PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \
+ PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \
+ PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \
+ PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \
+ PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \
+ PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \
+ PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \
+ PORT_1(fn, pfx##260, sfx), PORT_1(fn, pfx##261, sfx), \
+ PORT_1(fn, pfx##262, sfx), PORT_1(fn, pfx##263, sfx), \
+ PORT_1(fn, pfx##264, sfx)
enum {
PINMUX_RESERVED = 0,
PINMUX_DATA_BEGIN,
- PORT_265(DATA), /* PORT0_DATA -> PORT264_DATA */
+ PORT_ALL(DATA), /* PORT0_DATA -> PORT264_DATA */
PINMUX_DATA_END,
PINMUX_INPUT_BEGIN,
- PORT_265(IN), /* PORT0_IN -> PORT264_IN */
+ PORT_ALL(IN), /* PORT0_IN -> PORT264_IN */
PINMUX_INPUT_END,
PINMUX_INPUT_PULLUP_BEGIN,
- PORT_265(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
+ PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
PINMUX_INPUT_PULLUP_END,
PINMUX_INPUT_PULLDOWN_BEGIN,
- PORT_265(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
+ PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
PINMUX_INPUT_PULLDOWN_END,
PINMUX_OUTPUT_BEGIN,
- PORT_265(OUT), /* PORT0_OUT -> PORT264_OUT */
+ PORT_ALL(OUT), /* PORT0_OUT -> PORT264_OUT */
PINMUX_OUTPUT_END,
PINMUX_FUNCTION_BEGIN,
- PORT_265(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
- PORT_265(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
- PORT_265(FN0), /* PORT0_FN0 -> PORT264_FN0 */
- PORT_265(FN1), /* PORT0_FN1 -> PORT264_FN1 */
- PORT_265(FN2), /* PORT0_FN2 -> PORT264_FN2 */
- PORT_265(FN3), /* PORT0_FN3 -> PORT264_FN3 */
- PORT_265(FN4), /* PORT0_FN4 -> PORT264_FN4 */
- PORT_265(FN5), /* PORT0_FN5 -> PORT264_FN5 */
- PORT_265(FN6), /* PORT0_FN6 -> PORT264_FN6 */
- PORT_265(FN7), /* PORT0_FN7 -> PORT264_FN7 */
+ PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
+ PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
+ PORT_ALL(FN0), /* PORT0_FN0 -> PORT264_FN0 */
+ PORT_ALL(FN1), /* PORT0_FN1 -> PORT264_FN1 */
+ PORT_ALL(FN2), /* PORT0_FN2 -> PORT264_FN2 */
+ PORT_ALL(FN3), /* PORT0_FN3 -> PORT264_FN3 */
+ PORT_ALL(FN4), /* PORT0_FN4 -> PORT264_FN4 */
+ PORT_ALL(FN5), /* PORT0_FN5 -> PORT264_FN5 */
+ PORT_ALL(FN6), /* PORT0_FN6 -> PORT264_FN6 */
+ PORT_ALL(FN7), /* PORT0_FN7 -> PORT264_FN7 */
MSELBCR_MSEL17_1, MSELBCR_MSEL17_0,
MSELBCR_MSEL16_1, MSELBCR_MSEL16_0,
@@ -1039,13 +1020,9 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1),
};
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_265() _265(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
static struct pinmux_gpio pinmux_gpios[] = {
/* 55-1 -> 55-5 (GPIO) */
- GPIO_PORT_265(),
+ GPIO_PORT_ALL(),
/* Special Pull-up / Pull-down Functions */
GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU),
diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c
index f860caa..a1ea119 100644
--- a/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ b/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -24,83 +24,71 @@
#include <mach/sh73a0.h>
#include <mach/irqs.h>
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx) \
- _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
- _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
- _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
- _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
- _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _310(fn, pfx, sfx) \
- _10(fn, pfx, sfx), _10(fn, pfx##1, sfx), \
- _10(fn, pfx##2, sfx), _10(fn, pfx##3, sfx), \
- _10(fn, pfx##4, sfx), _10(fn, pfx##5, sfx), \
- _10(fn, pfx##6, sfx), _10(fn, pfx##7, sfx), \
- _10(fn, pfx##8, sfx), _10(fn, pfx##9, sfx), \
- _10(fn, pfx##10, sfx), \
- _1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx), \
- _1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx), \
- _1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx), \
- _1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx), \
- _1(fn, pfx##118, sfx), \
- _1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx), \
- _10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx), \
- _10(fn, pfx##15, sfx), \
- _1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx), \
- _1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx), \
- _1(fn, pfx##164, sfx), \
- _1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx), \
- _1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx), \
- _1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx), \
- _1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx), \
- _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \
- _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \
- _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \
- _10(fn, pfx##26, sfx), _10(fn, pfx##27, sfx), \
- _1(fn, pfx##280, sfx), _1(fn, pfx##281, sfx), \
- _1(fn, pfx##282, sfx), \
- _1(fn, pfx##288, sfx), _1(fn, pfx##289, sfx), \
- _10(fn, pfx##29, sfx), _10(fn, pfx##30, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_310(str) _310(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \
+ PORT_10(fn, pfx##2, sfx), PORT_10(fn, pfx##3, sfx), \
+ PORT_10(fn, pfx##4, sfx), PORT_10(fn, pfx##5, sfx), \
+ PORT_10(fn, pfx##6, sfx), PORT_10(fn, pfx##7, sfx), \
+ PORT_10(fn, pfx##8, sfx), PORT_10(fn, pfx##9, sfx), \
+ PORT_10(fn, pfx##10, sfx), \
+ PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \
+ PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \
+ PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \
+ PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \
+ PORT_1(fn, pfx##118, sfx), \
+ PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \
+ PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \
+ PORT_10(fn, pfx##15, sfx), \
+ PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \
+ PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \
+ PORT_1(fn, pfx##164, sfx), \
+ PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \
+ PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \
+ PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \
+ PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \
+ PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \
+ PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \
+ PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \
+ PORT_10(fn, pfx##26, sfx), PORT_10(fn, pfx##27, sfx), \
+ PORT_1(fn, pfx##280, sfx), PORT_1(fn, pfx##281, sfx), \
+ PORT_1(fn, pfx##282, sfx), \
+ PORT_1(fn, pfx##288, sfx), PORT_1(fn, pfx##289, sfx), \
+ PORT_10(fn, pfx##29, sfx), PORT_10(fn, pfx##30, sfx)
enum {
PINMUX_RESERVED = 0,
PINMUX_DATA_BEGIN,
- PORT_310(DATA), /* PORT0_DATA -> PORT309_DATA */
+ PORT_ALL(DATA), /* PORT0_DATA -> PORT309_DATA */
PINMUX_DATA_END,
PINMUX_INPUT_BEGIN,
- PORT_310(IN), /* PORT0_IN -> PORT309_IN */
+ PORT_ALL(IN), /* PORT0_IN -> PORT309_IN */
PINMUX_INPUT_END,
PINMUX_INPUT_PULLUP_BEGIN,
- PORT_310(IN_PU), /* PORT0_IN_PU -> PORT309_IN_PU */
+ PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT309_IN_PU */
PINMUX_INPUT_PULLUP_END,
PINMUX_INPUT_PULLDOWN_BEGIN,
- PORT_310(IN_PD), /* PORT0_IN_PD -> PORT309_IN_PD */
+ PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT309_IN_PD */
PINMUX_INPUT_PULLDOWN_END,
PINMUX_OUTPUT_BEGIN,
- PORT_310(OUT), /* PORT0_OUT -> PORT309_OUT */
+ PORT_ALL(OUT), /* PORT0_OUT -> PORT309_OUT */
PINMUX_OUTPUT_END,
PINMUX_FUNCTION_BEGIN,
- PORT_310(FN_IN), /* PORT0_FN_IN -> PORT309_FN_IN */
- PORT_310(FN_OUT), /* PORT0_FN_OUT -> PORT309_FN_OUT */
- PORT_310(FN0), /* PORT0_FN0 -> PORT309_FN0 */
- PORT_310(FN1), /* PORT0_FN1 -> PORT309_FN1 */
- PORT_310(FN2), /* PORT0_FN2 -> PORT309_FN2 */
- PORT_310(FN3), /* PORT0_FN3 -> PORT309_FN3 */
- PORT_310(FN4), /* PORT0_FN4 -> PORT309_FN4 */
- PORT_310(FN5), /* PORT0_FN5 -> PORT309_FN5 */
- PORT_310(FN6), /* PORT0_FN6 -> PORT309_FN6 */
- PORT_310(FN7), /* PORT0_FN7 -> PORT309_FN7 */
+ PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT309_FN_IN */
+ PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT309_FN_OUT */
+ PORT_ALL(FN0), /* PORT0_FN0 -> PORT309_FN0 */
+ PORT_ALL(FN1), /* PORT0_FN1 -> PORT309_FN1 */
+ PORT_ALL(FN2), /* PORT0_FN2 -> PORT309_FN2 */
+ PORT_ALL(FN3), /* PORT0_FN3 -> PORT309_FN3 */
+ PORT_ALL(FN4), /* PORT0_FN4 -> PORT309_FN4 */
+ PORT_ALL(FN5), /* PORT0_FN5 -> PORT309_FN5 */
+ PORT_ALL(FN6), /* PORT0_FN6 -> PORT309_FN6 */
+ PORT_ALL(FN7), /* PORT0_FN7 -> PORT309_FN7 */
MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
@@ -1555,12 +1543,8 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU),
};
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_310() _310(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
static struct pinmux_gpio pinmux_gpios[] = {
- GPIO_PORT_310(),
+ GPIO_PORT_ALL(),
/* Table 25-1 (Functions 0-7) */
GPIO_FN(VBUS_0),
diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h
index 5585f28..5f6322a 100644
--- a/include/linux/sh_pfc.h
+++ b/include/linux/sh_pfc.h
@@ -104,6 +104,29 @@ struct pinmux_info {
int register_pinmux(struct pinmux_info *pip);
int unregister_pinmux(struct pinmux_info *pip);
+/* helper macro for port */
+#define PORT_1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define PORT_10(fn, pfx, sfx) \
+ PORT_1(fn, pfx##0, sfx), PORT_1(fn, pfx##1, sfx), \
+ PORT_1(fn, pfx##2, sfx), PORT_1(fn, pfx##3, sfx), \
+ PORT_1(fn, pfx##4, sfx), PORT_1(fn, pfx##5, sfx), \
+ PORT_1(fn, pfx##6, sfx), PORT_1(fn, pfx##7, sfx), \
+ PORT_1(fn, pfx##8, sfx), PORT_1(fn, pfx##9, sfx)
+
+#define PORT_90(fn, pfx, sfx) \
+ PORT_10(fn, pfx##1, sfx), PORT_10(fn, pfx##2, sfx), \
+ PORT_10(fn, pfx##3, sfx), PORT_10(fn, pfx##4, sfx), \
+ PORT_10(fn, pfx##5, sfx), PORT_10(fn, pfx##6, sfx), \
+ PORT_10(fn, pfx##7, sfx), PORT_10(fn, pfx##8, sfx), \
+ PORT_10(fn, pfx##9, sfx)
+
+#define _PORT_ALL(pfx, sfx) pfx##_##sfx
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define PORT_ALL(str) CPU_ALL_PORT(_PORT_ALL, PORT, str)
+#define GPIO_PORT_ALL() CPU_ALL_PORT(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
/* helper macro for pinmux_enum_t */
#define PORT_DATA_I(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
--
1.7.5.4
^ permalink raw reply related
* [PATCH 08/20] ARM: mach-shmobile: move helper macro PORT_DATA_xx to sh_pfc.h
From: Kuninori Morimoto @ 2011-11-11 2:45 UTC (permalink / raw)
To: linux-sh
This patch move PORT_DATA_xx helper macro to sh_pfc.h.
and pfc-sh7372.c used it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/pfc-sh7367.c | 35 ------
arch/arm/mach-shmobile/pfc-sh7372.c | 214 +++++++++++++++++++----------------
arch/arm/mach-shmobile/pfc-sh7377.c | 39 -------
arch/arm/mach-shmobile/pfc-sh73a0.c | 39 -------
include/linux/sh_pfc.h | 36 ++++++
5 files changed, 151 insertions(+), 212 deletions(-)
diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c
index 128555e..2518116 100644
--- a/arch/arm/mach-shmobile/pfc-sh7367.c
+++ b/arch/arm/mach-shmobile/pfc-sh7367.c
@@ -327,41 +327,6 @@ enum {
PINMUX_MARK_END,
};
-#define PORT_DATA_I(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 9c265da..34d6d76 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -381,108 +381,124 @@ enum {
PINMUX_MARK_END,
};
-/* PORT_DATA_I_PD(nr) */
-#define _I___D(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-/* PORT_DATA_I_PU(nr) */
-#define _I__U_(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-/* PORT_DATA_I_PU_PD(nr) */
-#define _I__UD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-/* PORT_DATA_O(nr) */
-#define __O___(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-/* PORT_DATA_IO(nr) */
-#define _IO___(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN)
-
-/* PORT_DATA_IO_PD(nr) */
-#define _IO__D(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-/* PORT_DATA_IO_PU(nr) */
-#define _IO_U_(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-/* PORT_DATA_IO_PU_PD(nr) */
-#define _IO_UD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
-
- _IO__D(0), _IO__D(1), __O___(2), _I___D(3), _I___D(4),
- _I___D(5), _IO_UD(6), _I___D(7), _IO__D(8), __O___(9),
-
- __O___(10), __O___(11), _IO_UD(12), _IO__D(13), _IO__D(14),
- __O___(15), _IO__D(16), _IO__D(17), _I___D(18), _IO___(19),
-
- _IO___(20), _IO___(21), _IO___(22), _IO___(23), _IO___(24),
- _IO___(25), _IO___(26), _IO___(27), _IO___(28), _IO___(29),
-
- _IO___(30), _IO___(31), _IO___(32), _IO___(33), _IO___(34),
- _IO___(35), _IO___(36), _IO___(37), _IO___(38), _IO___(39),
-
- _IO___(40), _IO___(41), _IO___(42), _IO___(43), _IO___(44),
- _IO___(45), _IO_U_(46), _IO_U_(47), _IO_U_(48), _IO_U_(49),
-
- _IO_U_(50), _IO_U_(51), _IO_U_(52), _IO_U_(53), _IO_U_(54),
- _IO_U_(55), _IO_U_(56), _IO_U_(57), _IO_U_(58), _IO_U_(59),
-
- _IO_U_(60), _IO_U_(61), _IO___(62), __O___(63), __O___(64),
- _IO_U_(65), __O___(66), _IO_U_(67), __O___(68), _IO___(69), /*66?*/
-
- _IO___(70), _IO___(71), __O___(72), _I__U_(73), _I__UD(74),
- _IO_UD(75), _IO_UD(76), _IO_UD(77), _IO_UD(78), _IO_UD(79),
-
- _IO_UD(80), _IO_UD(81), _IO_UD(82), _IO_UD(83), _IO_UD(84),
- _IO_UD(85), _IO_UD(86), _IO_UD(87), _IO_UD(88), _IO_UD(89),
-
- _IO_UD(90), _IO_UD(91), _IO_UD(92), _IO_UD(93), _IO_UD(94),
- _IO_UD(95), _IO_U_(96), _IO_UD(97), _IO_UD(98), __O___(99), /*99?*/
-
- _IO__D(100), _IO__D(101), _IO__D(102), _IO__D(103), _IO__D(104),
- _IO__D(105), _IO_U_(106), _IO_U_(107), _IO_U_(108), _IO_U_(109),
-
- _IO_U_(110), _IO_U_(111), _IO__D(112), _IO__D(113), _IO_U_(114),
- _IO_U_(115), _IO_U_(116), _IO_U_(117), _IO_U_(118), _IO_U_(119),
-
- _IO_U_(120), _IO__D(121), _IO__D(122), _IO__D(123), _IO__D(124),
- _IO__D(125), _IO__D(126), _IO__D(127), _IO__D(128), _IO_UD(129),
-
- _IO_UD(130), _IO_UD(131), _IO_UD(132), _IO_UD(133), _IO_UD(134),
- _IO_UD(135), _IO__D(136), _IO__D(137), _IO__D(138), _IO__D(139),
-
- _IO__D(140), _IO__D(141), _IO__D(142), _IO_UD(143), _IO__D(144),
- _IO__D(145), _IO__D(146), _IO__D(147), _IO__D(148), _IO__D(149),
-
- _IO__D(150), _IO__D(151), _IO_UD(152), _I___D(153), _IO_UD(154),
- _I___D(155), _IO__D(156), _IO__D(157), _I___D(158), _IO__D(159),
-
- __O___(160), _IO__D(161), _IO__D(162), _IO__D(163), _I___D(164),
- _IO__D(165), _I___D(166), _I___D(167), _I___D(168), _I___D(169),
-
- _I___D(170), __O___(171), _IO_UD(172), _IO_UD(173), _IO_UD(174),
- _IO_UD(175), _IO_UD(176), _IO_UD(177), _IO_UD(178), __O___(179),
-
- _IO_UD(180), _IO_UD(181), _IO_UD(182), _IO_UD(183), _IO_UD(184),
- __O___(185), _IO_UD(186), _IO_UD(187), _IO_UD(188), _IO_UD(189),
-
- _IO_UD(190),
+ PORT_DATA_IO_PD(0), PORT_DATA_IO_PD(1),
+ PORT_DATA_O(2), PORT_DATA_I_PD(3),
+ PORT_DATA_I_PD(4), PORT_DATA_I_PD(5),
+ PORT_DATA_IO_PU_PD(6), PORT_DATA_I_PD(7),
+ PORT_DATA_IO_PD(8), PORT_DATA_O(9),
+
+ PORT_DATA_O(10), PORT_DATA_O(11),
+ PORT_DATA_IO_PU_PD(12), PORT_DATA_IO_PD(13),
+ PORT_DATA_IO_PD(14), PORT_DATA_O(15),
+ PORT_DATA_IO_PD(16), PORT_DATA_IO_PD(17),
+ PORT_DATA_I_PD(18), PORT_DATA_IO(19),
+
+ PORT_DATA_IO(20), PORT_DATA_IO(21),
+ PORT_DATA_IO(22), PORT_DATA_IO(23),
+ PORT_DATA_IO(24), PORT_DATA_IO(25),
+ PORT_DATA_IO(26), PORT_DATA_IO(27),
+ PORT_DATA_IO(28), PORT_DATA_IO(29),
+
+ PORT_DATA_IO(30), PORT_DATA_IO(31),
+ PORT_DATA_IO(32), PORT_DATA_IO(33),
+ PORT_DATA_IO(34), PORT_DATA_IO(35),
+ PORT_DATA_IO(36), PORT_DATA_IO(37),
+ PORT_DATA_IO(38), PORT_DATA_IO(39),
+
+ PORT_DATA_IO(40), PORT_DATA_IO(41),
+ PORT_DATA_IO(42), PORT_DATA_IO(43),
+ PORT_DATA_IO(44), PORT_DATA_IO(45),
+ PORT_DATA_IO_PU(46), PORT_DATA_IO_PU(47),
+ PORT_DATA_IO_PU(48), PORT_DATA_IO_PU(49),
+
+ PORT_DATA_IO_PU(50), PORT_DATA_IO_PU(51),
+ PORT_DATA_IO_PU(52), PORT_DATA_IO_PU(53),
+ PORT_DATA_IO_PU(54), PORT_DATA_IO_PU(55),
+ PORT_DATA_IO_PU(56), PORT_DATA_IO_PU(57),
+ PORT_DATA_IO_PU(58), PORT_DATA_IO_PU(59),
+
+ PORT_DATA_IO_PU(60), PORT_DATA_IO_PU(61),
+ PORT_DATA_IO(62), PORT_DATA_O(63),
+ PORT_DATA_O(64), PORT_DATA_IO_PU(65),
+ PORT_DATA_O(66), PORT_DATA_IO_PU(67), /*66?*/
+ PORT_DATA_O(68), PORT_DATA_IO(69),
+
+ PORT_DATA_IO(70), PORT_DATA_IO(71),
+ PORT_DATA_O(72), PORT_DATA_I_PU(73),
+ PORT_DATA_I_PU_PD(74), PORT_DATA_IO_PU_PD(75),
+ PORT_DATA_IO_PU_PD(76), PORT_DATA_IO_PU_PD(77),
+ PORT_DATA_IO_PU_PD(78), PORT_DATA_IO_PU_PD(79),
+
+ PORT_DATA_IO_PU_PD(80), PORT_DATA_IO_PU_PD(81),
+ PORT_DATA_IO_PU_PD(82), PORT_DATA_IO_PU_PD(83),
+ PORT_DATA_IO_PU_PD(84), PORT_DATA_IO_PU_PD(85),
+ PORT_DATA_IO_PU_PD(86), PORT_DATA_IO_PU_PD(87),
+ PORT_DATA_IO_PU_PD(88), PORT_DATA_IO_PU_PD(89),
+
+ PORT_DATA_IO_PU_PD(90), PORT_DATA_IO_PU_PD(91),
+ PORT_DATA_IO_PU_PD(92), PORT_DATA_IO_PU_PD(93),
+ PORT_DATA_IO_PU_PD(94), PORT_DATA_IO_PU_PD(95),
+ PORT_DATA_IO_PU(96), PORT_DATA_IO_PU_PD(97),
+ PORT_DATA_IO_PU_PD(98), PORT_DATA_O(99), /*99?*/
+
+ PORT_DATA_IO_PD(100), PORT_DATA_IO_PD(101),
+ PORT_DATA_IO_PD(102), PORT_DATA_IO_PD(103),
+ PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105),
+ PORT_DATA_IO_PU(106), PORT_DATA_IO_PU(107),
+ PORT_DATA_IO_PU(108), PORT_DATA_IO_PU(109),
+
+ PORT_DATA_IO_PU(110), PORT_DATA_IO_PU(111),
+ PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113),
+ PORT_DATA_IO_PU(114), PORT_DATA_IO_PU(115),
+ PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117),
+ PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119),
+
+ PORT_DATA_IO_PU(120), PORT_DATA_IO_PD(121),
+ PORT_DATA_IO_PD(122), PORT_DATA_IO_PD(123),
+ PORT_DATA_IO_PD(124), PORT_DATA_IO_PD(125),
+ PORT_DATA_IO_PD(126), PORT_DATA_IO_PD(127),
+ PORT_DATA_IO_PD(128), PORT_DATA_IO_PU_PD(129),
+
+ PORT_DATA_IO_PU_PD(130), PORT_DATA_IO_PU_PD(131),
+ PORT_DATA_IO_PU_PD(132), PORT_DATA_IO_PU_PD(133),
+ PORT_DATA_IO_PU_PD(134), PORT_DATA_IO_PU_PD(135),
+ PORT_DATA_IO_PD(136), PORT_DATA_IO_PD(137),
+ PORT_DATA_IO_PD(138), PORT_DATA_IO_PD(139),
+
+ PORT_DATA_IO_PD(140), PORT_DATA_IO_PD(141),
+ PORT_DATA_IO_PD(142), PORT_DATA_IO_PU_PD(143),
+ PORT_DATA_IO_PD(144), PORT_DATA_IO_PD(145),
+ PORT_DATA_IO_PD(146), PORT_DATA_IO_PD(147),
+ PORT_DATA_IO_PD(148), PORT_DATA_IO_PD(149),
+
+ PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151),
+ PORT_DATA_IO_PU_PD(152), PORT_DATA_I_PD(153),
+ PORT_DATA_IO_PU_PD(154), PORT_DATA_I_PD(155),
+ PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157),
+ PORT_DATA_I_PD(158), PORT_DATA_IO_PD(159),
+
+ PORT_DATA_O(160), PORT_DATA_IO_PD(161),
+ PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163),
+ PORT_DATA_I_PD(164), PORT_DATA_IO_PD(165),
+ PORT_DATA_I_PD(166), PORT_DATA_I_PD(167),
+ PORT_DATA_I_PD(168), PORT_DATA_I_PD(169),
+
+ PORT_DATA_I_PD(170), PORT_DATA_O(171),
+ PORT_DATA_IO_PU_PD(172), PORT_DATA_IO_PU_PD(173),
+ PORT_DATA_IO_PU_PD(174), PORT_DATA_IO_PU_PD(175),
+ PORT_DATA_IO_PU_PD(176), PORT_DATA_IO_PU_PD(177),
+ PORT_DATA_IO_PU_PD(178), PORT_DATA_O(179),
+
+ PORT_DATA_IO_PU_PD(180), PORT_DATA_IO_PU_PD(181),
+ PORT_DATA_IO_PU_PD(182), PORT_DATA_IO_PU_PD(183),
+ PORT_DATA_IO_PU_PD(184), PORT_DATA_O(185),
+ PORT_DATA_IO_PU_PD(186), PORT_DATA_IO_PU_PD(187),
+ PORT_DATA_IO_PU_PD(188), PORT_DATA_IO_PU_PD(189),
+
+ PORT_DATA_IO_PU_PD(190),
/* IRQ */
PINMUX_DATA(IRQ0_6_MARK, PORT6_FN0, MSEL1CR_0_0),
diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c
index 613e684..e4c7018 100644
--- a/arch/arm/mach-shmobile/pfc-sh7377.c
+++ b/arch/arm/mach-shmobile/pfc-sh7377.c
@@ -360,45 +360,6 @@ enum {
PINMUX_MARK_END,
};
-#define PORT_DATA_I(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
/* 55-1 (GPIO) */
diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c
index a2d99b3..f860caa 100644
--- a/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ b/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -525,45 +525,6 @@ enum {
PINMUX_MARK_END,
};
-#define PORT_DATA_I(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h
index bc8c920..5585f28 100644
--- a/include/linux/sh_pfc.h
+++ b/include/linux/sh_pfc.h
@@ -104,4 +104,40 @@ struct pinmux_info {
int register_pinmux(struct pinmux_info *pip);
int unregister_pinmux(struct pinmux_info *pip);
+/* helper macro for pinmux_enum_t */
+#define PORT_DATA_I(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+
#endif /* __SH_PFC_H */
--
1.7.5.4
^ permalink raw reply related
* [PATCH 07/20] ARM: mach-shmobile: ap4evb: remove white space from end of line
From: Kuninori Morimoto @ 2011-11-11 2:45 UTC (permalink / raw)
To: linux-sh
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/board-ap4evb.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 7283d69..f64c27f 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -201,7 +201,7 @@ static struct physmap_flash_data nor_flash_data = {
static struct resource nor_flash_resources[] = {
[0] = {
.start = 0x20000000, /* CS0 shadow instead of regular CS0 */
- .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
+ .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
.flags = IORESOURCE_MEM,
}
};
--
1.7.5.4
^ permalink raw reply related
* [PATCH 06/20] ARM: mach-shmobile: clock-sh7372: remove un-necessary index
From: Kuninori Morimoto @ 2011-11-11 2:45 UTC (permalink / raw)
To: linux-sh
it is not necessary to have sh7372_xxxx index on static variable
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/clock-sh7372.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 6697592..995a9c3 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -476,7 +476,7 @@ static struct clk_ops fsidiv_clk_ops = {
.disable = fsidiv_disable,
};
-static struct clk_mapping sh7372_fsidiva_clk_mapping = {
+static struct clk_mapping fsidiva_clk_mapping = {
.phys = FSIDIVA,
.len = 8,
};
@@ -484,10 +484,10 @@ static struct clk_mapping sh7372_fsidiva_clk_mapping = {
struct clk sh7372_fsidiva_clk = {
.ops = &fsidiv_clk_ops,
.parent = &div6_reparent_clks[DIV6_FSIA], /* late install */
- .mapping = &sh7372_fsidiva_clk_mapping,
+ .mapping = &fsidiva_clk_mapping,
};
-static struct clk_mapping sh7372_fsidivb_clk_mapping = {
+static struct clk_mapping fsidivb_clk_mapping = {
.phys = FSIDIVB,
.len = 8,
};
@@ -495,7 +495,7 @@ static struct clk_mapping sh7372_fsidivb_clk_mapping = {
struct clk sh7372_fsidivb_clk = {
.ops = &fsidiv_clk_ops,
.parent = &div6_reparent_clks[DIV6_FSIB], /* late install */
- .mapping = &sh7372_fsidivb_clk_mapping,
+ .mapping = &fsidivb_clk_mapping,
};
static struct clk *late_main_clks[] = {
--
1.7.5.4
^ permalink raw reply related
* [PATCH 05/20] ARM: mach-shmobile: kota2: add comment out separator
From: Kuninori Morimoto @ 2011-11-11 2:44 UTC (permalink / raw)
To: linux-sh
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/board-kota2.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index adc7312..bd9a784 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -48,6 +48,7 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/traps.h>
+/* SMSC 9220 */
static struct resource smsc9220_resources[] = {
[0] = {
.start = 0x14000000, /* CS5A */
@@ -77,6 +78,7 @@ static struct platform_device eth_device = {
.num_resources = ARRAY_SIZE(smsc9220_resources),
};
+/* KEYSC */
static struct sh_keysc_info keysc_platdata = {
.mode = SH_KEYSC_MODE_6,
.scan_timing = 3,
@@ -120,6 +122,7 @@ static struct platform_device keysc_device = {
},
};
+/* GPIO KEY */
#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
static struct gpio_keys_button gpio_buttons[] = {
@@ -150,6 +153,7 @@ static struct platform_device gpio_keys_device = {
},
};
+/* GPIO LED */
#define GPIO_LED(n, g) { .name = n, .gpio = g }
static struct gpio_led gpio_leds[] = {
@@ -175,6 +179,7 @@ static struct platform_device gpio_leds_device = {
},
};
+/* MMCIF */
static struct resource mmcif_resources[] = {
[0] = {
.name = "MMCIF",
@@ -207,6 +212,7 @@ static struct platform_device mmcif_device = {
.resource = mmcif_resources,
};
+/* SDHI0 */
static struct sh_mobile_sdhi_info sdhi0_info = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
@@ -243,6 +249,7 @@ static struct platform_device sdhi0_device = {
},
};
+/* SDHI1 */
static struct sh_mobile_sdhi_info sdhi1_info = {
.tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
--
1.7.5.4
^ permalink raw reply related
* [PATCH 04/20] ARM: mach-shmobile: sh73a0: add MMC data pin pull-up
From: Kuninori Morimoto @ 2011-11-11 2:44 UTC (permalink / raw)
To: linux-sh
This patch adds MMC data pin pull-up option for pfc-sh73a0.c,
and select it on ag5evm board.
The MMC read/write will be error without this patch.
Cc: Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
arch/arm/mach-shmobile/board-ag5evm.c | 16 ++++++------
arch/arm/mach-shmobile/include/mach/sh73a0.h | 8 ++++++
arch/arm/mach-shmobile/pfc-sh73a0.c | 34 ++++++++++++++++++++++++++
3 files changed, 50 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 83624e2..b862e9f 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -515,14 +515,14 @@ static void __init ag5evm_init(void)
/* enable MMCIF */
gpio_request(GPIO_FN_MMCCLK0, NULL);
gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
- gpio_request(GPIO_FN_MMCD0_0, NULL);
- gpio_request(GPIO_FN_MMCD0_1, NULL);
- gpio_request(GPIO_FN_MMCD0_2, NULL);
- gpio_request(GPIO_FN_MMCD0_3, NULL);
- gpio_request(GPIO_FN_MMCD0_4, NULL);
- gpio_request(GPIO_FN_MMCD0_5, NULL);
- gpio_request(GPIO_FN_MMCD0_6, NULL);
- gpio_request(GPIO_FN_MMCD0_7, NULL);
+ gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
gpio_request(GPIO_PORT208, NULL); /* Reset */
gpio_direction_output(GPIO_PORT208, 1);
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 18ae6a9..881d515 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -470,6 +470,14 @@ enum {
GPIO_FN_SDHICMD2_PU,
GPIO_FN_MMCCMD0_PU,
GPIO_FN_MMCCMD1_PU,
+ GPIO_FN_MMCD0_0_PU,
+ GPIO_FN_MMCD0_1_PU,
+ GPIO_FN_MMCD0_2_PU,
+ GPIO_FN_MMCD0_3_PU,
+ GPIO_FN_MMCD0_4_PU,
+ GPIO_FN_MMCD0_5_PU,
+ GPIO_FN_MMCD0_6_PU,
+ GPIO_FN_MMCD0_7_PU,
GPIO_FN_FSIACK_PU,
GPIO_FN_FSIAILR_PU,
GPIO_FN_FSIAIBT_PU,
diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c
index 5abe02f..a2d99b3 100644
--- a/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ b/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -508,6 +508,14 @@ enum {
SDHICMD2_PU_MARK,
MMCCMD0_PU_MARK,
MMCCMD1_PU_MARK,
+ MMCD0_0_PU_MARK,
+ MMCD0_1_PU_MARK,
+ MMCD0_2_PU_MARK,
+ MMCD0_3_PU_MARK,
+ MMCD0_4_PU_MARK,
+ MMCD0_5_PU_MARK,
+ MMCD0_6_PU_MARK,
+ MMCD0_7_PU_MARK,
FSIBISLD_PU_MARK,
FSIACK_PU_MARK,
FSIAILR_PU_MARK,
@@ -1561,6 +1569,24 @@ static pinmux_enum_t pinmux_data[] = {
MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU,
MSEL4CR_MSEL15_1),
+
+ PINMUX_DATA(MMCD0_0_PU_MARK,
+ PORT271_FN1, PORT271_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_1_PU_MARK,
+ PORT272_FN1, PORT272_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_2_PU_MARK,
+ PORT273_FN1, PORT273_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_3_PU_MARK,
+ PORT274_FN1, PORT274_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_4_PU_MARK,
+ PORT275_FN1, PORT275_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_5_PU_MARK,
+ PORT276_FN1, PORT276_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_6_PU_MARK,
+ PORT277_FN1, PORT277_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_7_PU_MARK,
+ PORT278_FN1, PORT278_IN_PU, MSEL4CR_MSEL15_0),
+
PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU),
PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
@@ -2236,6 +2262,14 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(SDHICMD2_PU),
GPIO_FN(MMCCMD0_PU),
GPIO_FN(MMCCMD1_PU),
+ GPIO_FN(MMCD0_0_PU),
+ GPIO_FN(MMCD0_1_PU),
+ GPIO_FN(MMCD0_2_PU),
+ GPIO_FN(MMCD0_3_PU),
+ GPIO_FN(MMCD0_4_PU),
+ GPIO_FN(MMCD0_5_PU),
+ GPIO_FN(MMCD0_6_PU),
+ GPIO_FN(MMCD0_7_PU),
GPIO_FN(FSIACK_PU),
GPIO_FN(FSIAILR_PU),
GPIO_FN(FSIAIBT_PU),
--
1.7.5.4
^ permalink raw reply related
* [PATCH 03/20] sh: clkfwk: add clk_rate_mult_range_round()
From: Kuninori Morimoto @ 2011-11-11 2:43 UTC (permalink / raw)
To: linux-sh
Some clock pulse generator has PLL multiplication.
clk_rate_mult_range_round() will be good helper for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
drivers/sh/clk/core.c | 20 ++++++++++++++++++++
include/linux/sh_clk.h | 3 +++
2 files changed, 23 insertions(+), 0 deletions(-)
diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
index dc8d022..352036b 100644
--- a/drivers/sh/clk/core.c
+++ b/drivers/sh/clk/core.c
@@ -173,6 +173,26 @@ long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
return clk_rate_round_helper(&div_range_round);
}
+static long clk_rate_mult_range_iter(unsigned int pos,
+ struct clk_rate_round_data *rounder)
+{
+ return clk_get_rate(rounder->arg) * pos;
+}
+
+long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
+ unsigned int mult_max, unsigned long rate)
+{
+ struct clk_rate_round_data mult_range_round = {
+ .min = mult_min,
+ .max = mult_max,
+ .func = clk_rate_mult_range_iter,
+ .arg = clk_get_parent(clk),
+ .rate = rate,
+ };
+
+ return clk_rate_round_helper(&mult_range_round);
+}
+
int clk_rate_table_find(struct clk *clk,
struct cpufreq_frequency_table *freq_table,
unsigned long rate)
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index 3ccf186..9237c29 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -94,6 +94,9 @@ int clk_rate_table_find(struct clk *clk,
long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
unsigned int div_max, unsigned long rate);
+long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
+ unsigned int mult_max, unsigned long rate);
+
long clk_round_parent(struct clk *clk, unsigned long target,
unsigned long *best_freq, unsigned long *parent_freq,
unsigned int div_min, unsigned int div_max);
--
1.7.5.4
^ permalink raw reply related
* [PATCH 02/20] serial: sh-sci: clean up white space
From: Kuninori Morimoto @ 2011-11-11 2:43 UTC (permalink / raw)
To: linux-sh
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
drivers/tty/serial/sh-sci.h | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index e9bed03..ab6be55 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -11,13 +11,13 @@
#define SCxSR_ERRORS(port) (to_sci_port(port)->cfg->error_mask)
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
- defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_ARCH_SH73A0) || \
- defined(CONFIG_ARCH_SH7367) || \
- defined(CONFIG_ARCH_SH7377) || \
- defined(CONFIG_ARCH_SH7372)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7720) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7721) ||\
+ defined(CONFIG_ARCH_SH73A0) ||\
+ defined(CONFIG_ARCH_SH7367) ||\
+ defined(CONFIG_ARCH_SH7377) ||\
+ defined(CONFIG_ARCH_SH7372)
# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf)
--
1.7.5.4
^ permalink raw reply related
* [PATCH 01/20] mailmap: Fix up renesas member's attribution
From: Kuninori Morimoto @ 2011-11-11 2:43 UTC (permalink / raw)
To: linux-sh
Some renesas member had used multi name on same email address.
This patch will cleanup git shortlog for renesas member.
Cc: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
.mailmap | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/.mailmap b/.mailmap
index a4806f0..9b0d026 100644
--- a/.mailmap
+++ b/.mailmap
@@ -68,6 +68,7 @@ Juha Yrjola <juha.yrjola@solidboot.com>
Kay Sievers <kay.sievers@vrfy.org>
Kenneth W Chen <kenneth.w.chen@intel.com>
Koushik <raghavendra.koushik@neterion.com>
+Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Leonid I Ananiev <leonid.i.ananiev@intel.com>
Linas Vepstas <linas@austin.ibm.com>
Mark Brown <broonie@sirena.org.uk>
@@ -111,3 +112,4 @@ Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
+Yusuke Goda <goda.yusuke@renesas.com>
--
1.7.5.4
^ permalink raw reply related
* [PATCH 0/20] ARM/sh: re-send morimoto's patch set
From: kuninori.morimoto.gx @ 2011-11-11 2:42 UTC (permalink / raw)
To: linux-sh
Dear Paul
These are my sh/sh-arm patch set which are posted to ML but still
can not find in your branch.
I'm so sorry that my patch set was very confusable.
These are based on paul/rmobile-latest.
I posted more patches, but they were based on sh_mipi patches.
I dropped it this time.
I will re-post it if fbdev ML accepted it.
Kuninori Morimoto (20):
mailmap: Fix up renesas member's attribution
serial: sh-sci: clean up white space
sh: clkfwk: add clk_rate_mult_range_round()
ARM: mach-shmobile: sh73a0: add MMC data pin pull-up
ARM: mach-shmobile: kota2: add comment out separator
ARM: mach-shmobile: clock-sh7372: remove un-necessary index
ARM: mach-shmobile: ap4evb: remove white space from end of line
ARM: mach-shmobile: move helper macro PORT_DATA_xx to sh_pfc.h
ARM: mach-shmobile: move helper macro PORT_xx to sh_pfc.h
ARM: mach-shmobile: move helper macro PORTCR to sh_pfc.h
ARM: mach-shmobile: R-Mobile A1 support.
ARM: mach-shmobile: r8a7740: add PFC support.
ARM: mach-shmobile: r8a7740: add i2c support
ARM: mach-shmobile: r8a7740: add INTC support
ARM: mach-shmobile: add bonito board support.
ARM: mach-shmobile: bonito: Add dip-switch selector
ARM: mach-shmobile: bonito: add PMIC settings
ARM: mach-shmobile: bonito: Add LCDC0 support
ARM: mach-shmobile: bonito: add FPGA irq demux
ARM: mach-shmobile: bonito: add SMSC9221 support
^ permalink raw reply
* Re: [PATCH 4/5] treewide: Convert uses of ATTRIB_NORETURN to __noreturn
From: Paul Mundt @ 2011-11-11 2:02 UTC (permalink / raw)
To: Joe Perches
Cc: Andrew Morton, linux-kernel, Tony Luck, Fenghua Yu,
Geert Uytterhoeven, Ralf Baechle, David Howells, Koichi Yasutake,
Benjamin Herrenschmidt, Paul Mackerras, Martin Schwidefsky,
Heiko Carstens, linux390, Chris Metcalf, linux-ia64, linux-m68k,
linux-mips, linux-am33-list, linuxppc-dev, linux-s390, linux-sh
In-Reply-To: <abb1d8b542872ef3bfd695e85d3b8a0fd70645b9.1320917558.git.joe@perches.com>
On Thu, Nov 10, 2011 at 01:41:45AM -0800, Joe Perches wrote:
> Use the more commonly used __noreturn instead of ATTRIB_NORETURN.
>
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
> arch/ia64/kernel/machine_kexec.c | 2 +-
> arch/m68k/amiga/config.c | 2 +-
> arch/mips/include/asm/ptrace.h | 2 +-
> arch/mips/kernel/traps.c | 2 +-
> arch/mn10300/include/asm/exceptions.h | 2 +-
> arch/powerpc/kernel/machine_kexec_32.c | 2 +-
> arch/powerpc/kernel/machine_kexec_64.c | 2 +-
> arch/s390/include/asm/processor.h | 2 +-
> arch/sh/kernel/process_32.c | 2 +-
> arch/sh/kernel/process_64.c | 2 +-
> arch/tile/kernel/machine_kexec.c | 2 +-
> include/linux/kernel.h | 6 +++---
> 12 files changed, 14 insertions(+), 14 deletions(-)
>
For the SH bits:
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
^ permalink raw reply
* Re: [PATCH] ARM: mach-shmobile: sh7372 A4R suspend/resume order fix
From: Magnus Damm @ 2011-11-11 1:07 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <20110927085408.27727.59395.sendpatchset@w520>
> From: Rafael J. Wysocki <rjw@sisk.pl>
> Subject: PM / shmobile: Avoid restoring the INTCS state during initialization
>
> The SH7372 PM domain initialization routine calls pd_power_up()
> that executes the domain's .resume() callback, if present, and for
> the A4R domain this callback attepmts to restore the INTCS state from
> uninitialized data. To avoid that, introduce __pd_power_up() that
> will only execute the domain's .resume() callback if its second
> argument is 'true' and make the SH7372 PM domain initialization
> use it with 'false' as its second argument. Redefine pd_power_up()
> as a wrapper around __pd_power_up().
>
> Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Looks fine to me, from my point of view your implementation is better
than the other alternatives.
It is correct that Guennadi reported this issue, and the Signed-off
clearly shows that this specific implementation is coming from you. I
suppose there are more important things in life than git attribution,
but I do feel that I did spend a significant amount of time tracking
down this issue, writing the initial patch and then also communicating
with you guys. I may be wrong, but I suspect that if didn't do this
then this issue wouldn't have been fixed.
Unfortunately there does not seem to be any tag for that kind of work,
but if it existed then I would prefer to add this in between you and
Guennadi:
Tracked-down-by: Magnus Damm <damm@opensource.se>
Cheers,
/ magnus
^ permalink raw reply
* Re: [PATCH] ARM: mach-shmobile: sh7372 A4R suspend/resume order fix
From: Rafael J. Wysocki @ 2011-11-10 12:05 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <20110927085408.27727.59395.sendpatchset@w520>
On Wednesday, November 09, 2011, Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
>
> Update the sh7372 A4R code to make sure the suspend
> callback gets to be called before the resume callback.
>
> Without this fix the A4R resume callback is called before
> suspend. The resume callback restores the INTCS hardware
> registers with incorrect data which results in interrupts
> being masked when they shouldn't be. The user will notice
> this issue as IIC0 timing out during boot.
>
> Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> Signed-off-by: Magnus Damm <damm@opensource.se>
Well, I'd prefer to do something like the patch below instead.
Please let me know what you think.
Thanks,
Rafael
---
From: Rafael J. Wysocki <rjw@sisk.pl>
Subject: PM / shmobile: Avoid restoring the INTCS state during initialization
The SH7372 PM domain initialization routine calls pd_power_up()
that executes the domain's .resume() callback, if present, and for
the A4R domain this callback attepmts to restore the INTCS state from
uninitialized data. To avoid that, introduce __pd_power_up() that
will only execute the domain's .resume() callback if its second
argument is 'true' and make the SH7372 PM domain initialization
use it with 'false' as its second argument. Redefine pd_power_up()
as a wrapper around __pd_power_up().
Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
arch/arm/mach-shmobile/pm-sh7372.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
Index: linux/arch/arm/mach-shmobile/pm-sh7372.c
=================================--- linux.orig/arch/arm/mach-shmobile/pm-sh7372.c
+++ linux/arch/arm/mach-shmobile/pm-sh7372.c
@@ -107,9 +107,8 @@ static int pd_power_down(struct generic_
return 0;
}
-static int pd_power_up(struct generic_pm_domain *genpd)
+static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume)
{
- struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
unsigned int mask = 1 << sh7372_pd->bit_shift;
unsigned int retry_count;
int ret = 0;
@@ -138,12 +137,17 @@ static int pd_power_up(struct generic_pm
mask, __raw_readl(PSTR));
out:
- if (ret = 0 && sh7372_pd->resume)
+ if (ret = 0 && sh7372_pd->resume && do_resume)
sh7372_pd->resume();
return ret;
}
+static int pd_power_up(struct generic_pm_domain *genpd)
+{
+ return __pd_power_up(to_sh7372_pd(genpd), true);
+}
+
static void sh7372_a4r_suspend(void)
{
sh7372_intcs_suspend();
@@ -209,7 +213,7 @@ void sh7372_init_pm_domain(struct sh7372
genpd->dev_irq_safe = true;
genpd->power_off = pd_power_down;
genpd->power_on = pd_power_up;
- genpd->power_on(&sh7372_pd->genpd);
+ __pd_power_up(sh7372_pd, false);
}
void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
^ permalink raw reply
* Re: [PATCH 4/5] treewide: Convert uses of ATTRIB_NORETURN to
From: Ralf Baechle @ 2011-11-10 11:16 UTC (permalink / raw)
To: Joe Perches
Cc: Andrew Morton, linux-kernel, Tony Luck, Fenghua Yu,
Geert Uytterhoeven, David Howells, Koichi Yasutake,
Benjamin Herrenschmidt, Paul Mackerras, Martin Schwidefsky,
Heiko Carstens, linux390, Paul Mundt, Chris Metcalf, linux-ia64,
linux-m68k, linux-mips, linux-am33-list, linuxppc-dev, linux-s390,
linux-sh
In-Reply-To: <abb1d8b542872ef3bfd695e85d3b8a0fd70645b9.1320917558.git.joe@perches.com>
On Thu, Nov 10, 2011 at 01:41:45AM -0800, Joe Perches wrote:
> Use the more commonly used __noreturn instead of ATTRIB_NORETURN.
Subject and here: s/ATTRIB_NORETURN/ATTRIB_NORET/
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
> arch/ia64/kernel/machine_kexec.c | 2 +-
> arch/m68k/amiga/config.c | 2 +-
> arch/mips/include/asm/ptrace.h | 2 +-
> arch/mips/kernel/traps.c | 2 +-
For the MIPS bits:
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Ralf
^ permalink raw reply
* [PATCH 4/5] treewide: Convert uses of ATTRIB_NORETURN to __noreturn
From: Joe Perches @ 2011-11-10 9:41 UTC (permalink / raw)
To: Andrew Morton, linux-kernel
Cc: Tony Luck, Fenghua Yu, Geert Uytterhoeven, Ralf Baechle,
David Howells, Koichi Yasutake, Benjamin Herrenschmidt,
Paul Mackerras, Martin Schwidefsky, Heiko Carstens, linux390,
Paul Mundt, Chris Metcalf, linux-ia64, linux-m68k, linux-mips,
linux-am33-list, linuxppc-dev, linux-s390, linux-sh
In-Reply-To: <cover.1320917551.git.joe@perches.com>
Use the more commonly used __noreturn instead of ATTRIB_NORETURN.
Signed-off-by: Joe Perches <joe@perches.com>
---
arch/ia64/kernel/machine_kexec.c | 2 +-
arch/m68k/amiga/config.c | 2 +-
arch/mips/include/asm/ptrace.h | 2 +-
arch/mips/kernel/traps.c | 2 +-
arch/mn10300/include/asm/exceptions.h | 2 +-
arch/powerpc/kernel/machine_kexec_32.c | 2 +-
arch/powerpc/kernel/machine_kexec_64.c | 2 +-
arch/s390/include/asm/processor.h | 2 +-
arch/sh/kernel/process_32.c | 2 +-
arch/sh/kernel/process_64.c | 2 +-
arch/tile/kernel/machine_kexec.c | 2 +-
include/linux/kernel.h | 6 +++---
12 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/ia64/kernel/machine_kexec.c b/arch/ia64/kernel/machine_kexec.c
index 581a16d..4eed358 100644
--- a/arch/ia64/kernel/machine_kexec.c
+++ b/arch/ia64/kernel/machine_kexec.c
@@ -31,7 +31,7 @@ typedef void (*relocate_new_kernel_t)(
unsigned long indirection_page,
unsigned long start_address,
struct ia64_boot_param *boot_param,
- unsigned long pal_addr) ATTRIB_NORET;
+ unsigned long pal_addr) __noreturn;
struct kimage *ia64_kimage;
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index a3b0558..7aec938 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -512,7 +512,7 @@ static unsigned long amiga_gettimeoffset(void)
}
static void amiga_reset(void)
- ATTRIB_NORET;
+ __noreturn;
static void amiga_reset(void)
{
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index 3d91325..7b99c67 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -144,7 +144,7 @@ extern int ptrace_set_watch_regs(struct task_struct *child,
extern asmlinkage void syscall_trace_enter(struct pt_regs *regs);
extern asmlinkage void syscall_trace_leave(struct pt_regs *regs);
-extern void die(const char *, struct pt_regs *) ATTRIB_NORET;
+extern void die(const char *, struct pt_regs *) __noreturn;
static inline void die_if_kernel(const char *str, struct pt_regs *regs)
{
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index fc2cbbc..ac740b0 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1340,7 +1340,7 @@ void ejtag_exception_handler(struct pt_regs *regs)
/*
* NMI exception handler.
*/
-void ATTRIB_NORET nmi_exception_handler(struct pt_regs *regs)
+void __noreturn nmi_exception_handler(struct pt_regs *regs)
{
bust_spinlocks(1);
printk("NMI taken!!!!\n");
diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h
index ca3e205..95a4d42 100644
--- a/arch/mn10300/include/asm/exceptions.h
+++ b/arch/mn10300/include/asm/exceptions.h
@@ -110,7 +110,7 @@ extern asmlinkage void nmi_handler(void);
extern asmlinkage void misalignment(struct pt_regs *, enum exception_code);
extern void die(const char *, struct pt_regs *, enum exception_code)
- ATTRIB_NORET;
+ __noreturn;
extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code);
diff --git a/arch/powerpc/kernel/machine_kexec_32.c b/arch/powerpc/kernel/machine_kexec_32.c
index 026e7f1..affe5dc 100644
--- a/arch/powerpc/kernel/machine_kexec_32.c
+++ b/arch/powerpc/kernel/machine_kexec_32.c
@@ -19,7 +19,7 @@
typedef void (*relocate_new_kernel_t)(
unsigned long indirection_page,
unsigned long reboot_code_buffer,
- unsigned long start_address) ATTRIB_NORET;
+ unsigned long start_address) __noreturn;
/*
* This is a generic machine_kexec function suitable at least for
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 5fbbf81..d7f6090 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -309,7 +309,7 @@ struct paca_struct kexec_paca;
/* Our assembly helper, in kexec_stub.S */
extern void kexec_sequence(void *newstack, unsigned long start,
void *image, void *control,
- void (*clear_all)(void)) ATTRIB_NORET;
+ void (*clear_all)(void)) __noreturn;
/* too late to fail here */
void default_machine_kexec(struct kimage *image)
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index 5f33d37..c0d6f77 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -238,7 +238,7 @@ static inline unsigned long __rewind_psw(psw_t psw, unsigned long ilc)
/*
* Function to drop a processor into disabled wait state
*/
-static inline void ATTRIB_NORET disabled_wait(unsigned long code)
+static inline void __noreturn disabled_wait(unsigned long code)
{
unsigned long ctl_buf;
psw_t dw_psw;
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index aaf6d59..7ec6651 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -70,7 +70,7 @@ void show_regs(struct pt_regs * regs)
/*
* Create a kernel thread
*/
-ATTRIB_NORET void kernel_thread_helper(void *arg, int (*fn)(void *))
+__noreturn void kernel_thread_helper(void *arg, int (*fn)(void *))
{
do_exit(fn(arg));
}
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 210c1ca..cbd4e4b 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -285,7 +285,7 @@ void show_regs(struct pt_regs *regs)
/*
* Create a kernel thread
*/
-ATTRIB_NORET void kernel_thread_helper(void *arg, int (*fn)(void *))
+__noreturn void kernel_thread_helper(void *arg, int (*fn)(void *))
{
do_exit(fn(arg));
}
diff --git a/arch/tile/kernel/machine_kexec.c b/arch/tile/kernel/machine_kexec.c
index b0c9070..6255f2e 100644
--- a/arch/tile/kernel/machine_kexec.c
+++ b/arch/tile/kernel/machine_kexec.c
@@ -252,7 +252,7 @@ void machine_kexec(struct kimage *image)
{
void *reboot_code_buffer;
void (*rnk)(unsigned long, void *, unsigned long)
- ATTRIB_NORET;
+ __noreturn;
/* Mask all interrupts before starting to reboot. */
interrupt_mask_set_mask(~0ULL);
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index c0e0055..b93c66e 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -187,15 +187,15 @@ extern struct atomic_notifier_head panic_notifier_list;
extern long (*panic_blink)(int state);
__printf(1, 2)
void panic(const char *fmt, ...)
- ATTRIB_NORET __cold;
+ __noreturn __cold;
extern void oops_enter(void);
extern void oops_exit(void);
void print_oops_end_marker(void);
extern int oops_may_print(void);
void do_exit(long error_code)
- ATTRIB_NORET;
+ __noreturn;
void complete_and_exit(struct completion *, long)
- ATTRIB_NORET;
+ __noreturn;
/* Internal, do not use. */
int __must_check _kstrtoul(const char *s, unsigned int base, unsigned long *res);
--
1.7.6.405.gc1be0
^ permalink raw reply related
* [PATCH 0/5] treewide: __attribute__ neatening
From: Joe Perches @ 2011-11-10 9:41 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-kernel, linux-ia64, linux-m68k, linux-mips, linux-am33-list,
linuxppc-dev, linux-s390, linux-sh
Use the more current __<foo> styles for compiler attributes.
NORET_TYPE is #defined to a null comment, so just remove it.
Joe Perches (5):
kernel.h: Neaten panic prototype
linkage: Remove unused NORET_AND macro
treewide: Remove useless NORET_TYPE macro and uses
treewide: Convert uses of ATTRIB_NORETURN to __noreturn
linkage: Remove unused ATTRIB_NORET macro
arch/avr32/include/asm/system.h | 2 +-
arch/avr32/kernel/traps.c | 2 +-
arch/ia64/kernel/machine_kexec.c | 4 ++--
arch/m68k/amiga/config.c | 4 ++--
arch/mips/include/asm/ptrace.h | 2 +-
arch/mips/kernel/traps.c | 2 +-
arch/mn10300/include/asm/exceptions.h | 2 +-
arch/powerpc/kernel/machine_kexec_32.c | 4 ++--
arch/powerpc/kernel/machine_kexec_64.c | 6 +++---
arch/s390/include/asm/processor.h | 2 +-
arch/s390/kernel/nmi.c | 2 +-
arch/sh/kernel/process_32.c | 2 +-
arch/sh/kernel/process_64.c | 2 +-
arch/tile/kernel/machine_kexec.c | 6 +++---
include/linux/kernel.h | 13 +++++++------
include/linux/linkage.h | 4 ----
include/linux/sched.h | 2 +-
kernel/exit.c | 6 +++---
kernel/panic.c | 2 +-
19 files changed, 33 insertions(+), 36 deletions(-)
--
1.7.6.405.gc1be0
^ permalink raw reply
* Re: [PATCH v2] ARM: mach-shmobile: sh7372 A4R suspend/resume order fix
From: Rafael J. Wysocki @ 2011-11-10 9:06 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <Pine.LNX.4.64.1111091914120.4188@axis700.grange>
On Thursday, November 10, 2011, Paul Mundt wrote:
> On Thu, Nov 10, 2011 at 11:14:42AM +0900, Magnus Damm wrote:
> > On Thu, Nov 10, 2011 at 8:30 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> > > On Wednesday, November 09, 2011, Guennadi Liakhovetski wrote:
> > >> I took the liberty to reimplement the original fix by Magnus in a
> > >> different way. I didn't quite like the idea of rewriting platform data,
> > >> which could and, probably, should actually be const, on each
> > >> domain-suspend. Instead, checking in resume, whether a valid state
> > >> snapshot is available seemed a bit prettier to me:-) The maintainer is, of
> > >> course, free to choose whichever version he prefers, they both
> > >>
> > >> "Fix issue in v3.2-rc1 on the sh7372 Mackerel board."
> > >
> > > Magnus, Paul, which one do you want me to take?
> >
> > I prefer leaving the INTCS code as-is - unaware of calling order and
> > putting the workaround in the Runtime PM code. In the end the ordering
> > issue is related to Runtime PM and not INTCS. If someone knows a
> > better way to fix the Runtime PM code then I'd be happy to accept
> > that. But I don't like putting the workaround in INTCS.
> >
> Agreed. While I don't much care for the approach taken by this patch
> either, keeping it insular at the framework level until the need for it
> can be resolved in the runtime PM code seems like a reasonable stop-gap.
> I would rather not paper over this in the platform code since it'll
> invariably lead to more instances that need to be audited and cleaned up
> later on, in addition to being more error prone.
OK, thanks!
^ permalink raw reply
* Re: [PATCH v2] ARM: mach-shmobile: sh7372 A4R suspend/resume order fix
From: Paul Mundt @ 2011-11-10 3:47 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <Pine.LNX.4.64.1111091914120.4188@axis700.grange>
On Thu, Nov 10, 2011 at 11:14:42AM +0900, Magnus Damm wrote:
> On Thu, Nov 10, 2011 at 8:30 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> > On Wednesday, November 09, 2011, Guennadi Liakhovetski wrote:
> >> I took the liberty to reimplement the original fix by Magnus in a
> >> different way. I didn't quite like the idea of rewriting platform data,
> >> which could and, probably, should actually be const, on each
> >> domain-suspend. Instead, checking in resume, whether a valid state
> >> snapshot is available seemed a bit prettier to me:-) The maintainer is, of
> >> course, free to choose whichever version he prefers, they both
> >>
> >> "Fix issue in v3.2-rc1 on the sh7372 Mackerel board."
> >
> > Magnus, Paul, which one do you want me to take?
>
> I prefer leaving the INTCS code as-is - unaware of calling order and
> putting the workaround in the Runtime PM code. In the end the ordering
> issue is related to Runtime PM and not INTCS. If someone knows a
> better way to fix the Runtime PM code then I'd be happy to accept
> that. But I don't like putting the workaround in INTCS.
>
Agreed. While I don't much care for the approach taken by this patch
either, keeping it insular at the framework level until the need for it
can be resolved in the runtime PM code seems like a reasonable stop-gap.
I would rather not paper over this in the platform code since it'll
invariably lead to more instances that need to be audited and cleaned up
later on, in addition to being more error prone.
^ permalink raw reply
* Re: [PATCH v2] ARM: mach-shmobile: sh7372 A4R suspend/resume order fix
From: Magnus Damm @ 2011-11-10 2:14 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <Pine.LNX.4.64.1111091914120.4188@axis700.grange>
On Thu, Nov 10, 2011 at 8:30 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> On Wednesday, November 09, 2011, Guennadi Liakhovetski wrote:
>> Update the sh7372 A4R code to make sure the suspend
>> callback gets to be called before the resume callback.
>>
>> Without this fix the A4R resume callback is called before
>> suspend. The resume callback restores the INTCS hardware
>> registers with incorrect data which results in interrupts
>> being masked when they shouldn't be. The user will notice
>> this issue as IIC0 timing out during boot.
>>
>> Thanks to Magnus Damm for tracking this problem down and providing the
>> initial fix and the commit description text.
>>
>> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
>> ---
>>
>> I took the liberty to reimplement the original fix by Magnus in a
>> different way. I didn't quite like the idea of rewriting platform data,
>> which could and, probably, should actually be const, on each
>> domain-suspend. Instead, checking in resume, whether a valid state
>> snapshot is available seemed a bit prettier to me:-) The maintainer is, of
>> course, free to choose whichever version he prefers, they both
>>
>> "Fix issue in v3.2-rc1 on the sh7372 Mackerel board."
>
> Magnus, Paul, which one do you want me to take?
I prefer leaving the INTCS code as-is - unaware of calling order and
putting the workaround in the Runtime PM code. In the end the ordering
issue is related to Runtime PM and not INTCS. If someone knows a
better way to fix the Runtime PM code then I'd be happy to accept
that. But I don't like putting the workaround in INTCS.
Cheers,
/ magnus
^ permalink raw reply
* Re: [PATCH] don't skip debugging output upon earlier loop termination
From: Rafael J. Wysocki @ 2011-11-09 23:58 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <CANqRtoQ6YPdQ=z7B8tSnLdf1qn8HbLhQiNc=VTDU7=8CkuBLyw@mail.gmail.com>
On Wednesday, November 09, 2011, Magnus Damm wrote:
> On Wed, Nov 9, 2011 at 3:44 AM, Guennadi Liakhovetski
> <g.liakhovetski@gmx.de> wrote:
> > Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> > ---
> > This is against the sh7372-test branch of the linux-pm tree. Feel free to
> > roll this patch into the respective original commit.
> >
> > diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
> > index 46ee116..a81d8a9 100644
> > --- a/arch/arm/mach-shmobile/pm-sh7372.c
> > +++ b/arch/arm/mach-shmobile/pm-sh7372.c
> > @@ -123,13 +123,13 @@ static int pd_power_up(struct generic_pm_domain *genpd)
> >
> > for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) {
> > if (!(__raw_readl(SWUCR) & mask))
> > - goto out;
> > + break;
> > if (retry_count > PSTR_RETRIES)
> > udelay(PSTR_DELAY_US);
> > else
> > cpu_relax();
> > }
> > - if (__raw_readl(SWUCR) & mask)
> > + if (!retry_count)
> > ret = -EIO;
> >
> > if (!sh7372_pd->no_debug)
> >
>
> Hi Guennadi,
>
> This looks fine to me. In the future, please remember to CC the
> linux-sh list for SoC-specific patches.
>
> Acked-by: Magnus Damm <damm@opensource.se>
Applied to linux-pm/pm-fixes.
Thanks,
Rafael
^ permalink raw reply
* Re: [PATCH] PM / Clocks: Only disable enabled clocks in pm_clk_suspend()
From: Rafael J. Wysocki @ 2011-11-09 23:57 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <20111109111351.901.52164.sendpatchset@w520>
On Wednesday, November 09, 2011, Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
>
> Refrain from running clk_disable() on clocks that
> have not been enabled. A typical case when this can
> happen is during Suspend-to-RAM for devices that have
> no driver associated with them. In such case the clock
> may be in default ACQUIRED state.
>
> Without this patch the sh7372 Mackerel board crashes
> in __clk_disable() during Suspend-to-RAM with:
> "Trying to disable clock 0xdeadbeef with 0 usecount"
> This happens for the CEU device which is added during
> boot. The test case has no CEU driver included in the
> kernel configuration. Needed for v3.2-rc1.
>
> Signed-off-by: Magnus Damm <damm@opensource.se>
Applied to linux-pm/pm-fixes.
Thanks,
Rafael
> ---
>
> drivers/base/power/clock_ops.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> --- 0001/drivers/base/power/clock_ops.c
> +++ work/drivers/base/power/clock_ops.c 2011-11-09 19:28:03.000000000 +0900
> @@ -229,7 +229,8 @@ int pm_clk_suspend(struct device *dev)
>
> list_for_each_entry_reverse(ce, &psd->clock_list, node) {
> if (ce->status < PCE_STATUS_ERROR) {
> - clk_disable(ce->clk);
> + if (ce->status = PCE_STATUS_ENABLED)
> + clk_disable(ce->clk);
> ce->status = PCE_STATUS_ACQUIRED;
> }
> }
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
^ permalink raw reply
* Re: [PATCH] ARM: mach-shmobile: sh7372 A3SP no_suspend_console fix
From: Rafael J. Wysocki @ 2011-11-09 23:56 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <20110712082459.18930.51005.sendpatchset@t400s>
On Wednesday, November 09, 2011, Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
>
> If "no_suspend_irq" is used on the sh7372 Mackerel board
> with v3.2-rc1 then Suspend-to-RAM fails because the serial
> console tries to write to the SCIF driver even though the
> power domain is turned off.
>
> This patch checks the state of "console_suspend_enabled"
> to see if A3SP should be forced enabled.
>
> Signed-off-by: Magnus Damm <damm@opensource.se>
Applied to linux-pm/pm-fixes.
Thanks,
Rafael
> ---
>
> arch/arm/mach-shmobile/pm-sh7372.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> --- 0001/arch/arm/mach-shmobile/pm-sh7372.c
> +++ work/arch/arm/mach-shmobile/pm-sh7372.c 2011-11-09 19:38:52.000000000 +0900
> @@ -20,6 +20,7 @@
> #include <linux/delay.h>
> #include <linux/irq.h>
> #include <linux/bitrev.h>
> +#include <linux/console.h>
> #include <asm/system.h>
> #include <asm/io.h>
> #include <asm/tlbflush.h>
> @@ -469,6 +470,11 @@ void __init sh7372_pm_init(void)
> /* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
> __raw_writel(0, PDNSEL);
>
> + /* serial consoles make use of SCIF hardware located in A3SP,
> + * keep such power domain on if "no_console_suspend" is set.
> + */
> + sh7372_a3sp.stay_on = !console_suspend_enabled;
> +
> sh7372_suspend_init();
> sh7372_cpuidle_init();
> }
>
>
^ permalink raw reply
* Re: [PATCH v2] ARM: mach-shmobile: sh7372 A4R suspend/resume order fix
From: Rafael J. Wysocki @ 2011-11-09 23:30 UTC (permalink / raw)
To: linux-sh
In-Reply-To: <Pine.LNX.4.64.1111091914120.4188@axis700.grange>
On Wednesday, November 09, 2011, Guennadi Liakhovetski wrote:
> Update the sh7372 A4R code to make sure the suspend
> callback gets to be called before the resume callback.
>
> Without this fix the A4R resume callback is called before
> suspend. The resume callback restores the INTCS hardware
> registers with incorrect data which results in interrupts
> being masked when they shouldn't be. The user will notice
> this issue as IIC0 timing out during boot.
>
> Thanks to Magnus Damm for tracking this problem down and providing the
> initial fix and the commit description text.
>
> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> ---
>
> I took the liberty to reimplement the original fix by Magnus in a
> different way. I didn't quite like the idea of rewriting platform data,
> which could and, probably, should actually be const, on each
> domain-suspend. Instead, checking in resume, whether a valid state
> snapshot is available seemed a bit prettier to me:-) The maintainer is, of
> course, free to choose whichever version he prefers, they both
>
> "Fix issue in v3.2-rc1 on the sh7372 Mackerel board."
Magnus, Paul, which one do you want me to take?
Rafael
> diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
> index 29cdc05..eeeb16b 100644
> --- a/arch/arm/mach-shmobile/intc-sh7372.c
> +++ b/arch/arm/mach-shmobile/intc-sh7372.c
> @@ -627,6 +627,7 @@ void __init sh7372_init_irq(void)
>
> static unsigned short ffd2[0x200];
> static unsigned short ffd5[0x100];
> +static bool intcs_state_saved = false;
>
> void sh7372_intcs_suspend(void)
> {
> @@ -646,12 +647,17 @@ void sh7372_intcs_suspend(void)
>
> for (k = 0x80; k <= 0x9c; k += 4)
> ffd5[k] = __raw_readb(intcs_ffd5 + k);
> +
> + intcs_state_saved = true;
> }
>
> void sh7372_intcs_resume(void)
> {
> int k;
>
> + if (!intcs_state_saved)
> + return;
> +
> for (k = 0x00; k <= 0x30; k += 4)
> __raw_writew(ffd2[k], intcs_ffd2 + k);
>
>
>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox