* boot log
@ 2002-12-02 17:17 m l -duns non scotus- mack
0 siblings, 0 replies; only message in thread
From: m l -duns non scotus- mack @ 2002-12-02 17:17 UTC (permalink / raw)
To: linux-smp
[-- Attachment #1: Type: text/plain, Size: 401 bytes --]
Dear Sirs,
I noticed this siruation this morning and saw that it included a message to
notify you. I would like to know what it's all about, please. The boot log is
attached.
--
***********************************************
Wastrel, Ne'er-Do-Well, and Layabout
M L Mack vhe, png,
Certified Scalawag
**********************************************
[-- Attachment #2: apic --]
[-- Type: text/plain, Size: 22750 bytes --]
Inspecting /boot/System.map-2.4.19-4GB
Loaded 14329 symbols from /boot/System.map-2.4.19-4GB.
Symbols match kernel version 2.4.19.
Loaded 57 symbols from 3 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.19-4GB (root@Pentium.suse.de) (gcc version 3.2) #1 Fri Sep 13 13:14:56 UTC 2002
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
<4> BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
<4> BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<4>Scanning bios EBDA for MXT signature
<5>127MB HIGHMEM available.
<5>896MB LOWMEM available.
<7>ACPI: have wakeup address 0xc0001000
<6>Advanced speculative caching feature not present
<4>On node 0 totalpages: 262140
<4>zone(0): 4096 pages.
<4>zone(1): 225280 pages.
<4>zone(2): 32764 pages.
<6>ACPI: RSDP (v000 ASUS ) @ 0x000f6860
<6>ACPI: RSDT (v001 ASUS P4S533 16944.11825) @ 0x3fffc000
<6>ACPI: FADT (v001 ASUS P4S533 16944.11825) @ 0x3fffc100
<6>ACPI: BOOT (v001 ASUS P4S533 16944.11825) @ 0x3fffc040
<6>ACPI: MADT (v001 ASUS P4S533 16944.11825) @ 0x3fffc080
<6>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<4>Processor #0 Unknown CPU [15:1] APIC version 16
<6>ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
<6>IOAPIC[0]: Assigned apic_id 2
<4>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, IRQ 0-23
<6>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1])
<6>ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x14] polarity[0x3] trigger[0x3])
<6>Using ACPI (MADT) for SMP configuration information
<4>Building zonelist for node : 0
<4>Kernel command line: root=/dev/hdb2 apic hdc=ide-scsi vga=791
<4>ide_setup: hdc=ide-scsi
<6>Initializing CPU#0
<4>Detected 1917.113 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 3827.30 BogoMIPS
<6>Memory: 1032908k/1048560k available (1553k kernel code, 15264k reserved, 416k data, 152k init, 131056k highmem)
<6>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
<6>Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
<7>CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 12K, L1 D cache: 8K
<6>CPU: L2 cache: 256K
<7>CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
<4>CPU: Intel(R) Pentium(R) 4 CPU 1.90GHz stepping 02
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>ENABLING IO-APIC IRQs
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-21, 2-22, 2-23 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<7>number of MP IRQ sources: 17.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>.... register #01: 00178000
<7>....... : max redirection entries: 0017
<7>....... : PRQ implemented: 1
<7>....... : IO APIC version: 0000
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 001 01 0 0 0 0 0 1 1 39
<7> 02 001 01 0 0 0 0 0 1 1 31
<7> 03 001 01 0 0 0 0 0 1 1 41
<7> 04 001 01 0 0 0 0 0 1 1 49
<7> 05 001 01 0 0 0 0 0 1 1 51
<7> 06 001 01 0 0 0 0 0 1 1 59
<7> 07 001 01 0 0 0 0 0 1 1 61
<7> 08 001 01 0 0 0 0 0 1 1 69
<7> 09 001 01 0 0 0 0 0 1 1 71
<7> 0a 001 01 0 0 0 0 0 1 1 79
<7> 0b 001 01 0 0 0 0 0 1 1 81
<7> 0c 001 01 0 0 0 0 0 1 1 89
<7> 0d 001 01 0 0 0 0 0 1 1 91
<7> 0e 001 01 0 0 0 0 0 1 1 99
<7> 0f 001 01 0 0 0 0 0 1 1 A1
<7> 10 000 00 1 0 0 0 0 0 0 00
<7> 11 000 00 1 0 0 0 0 0 0 00
<7> 12 000 00 1 0 0 0 0 0 0 00
<7> 13 000 00 1 0 0 0 0 0 0 00
<7> 14 001 01 1 1 0 1 0 1 1 71
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ5 -> 0:5
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ9 -> 0:9-> 0:20
<7>IRQ10 -> 0:10
<7>IRQ11 -> 0:11
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<6>.................................... done.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 1917.0514 MHz.
<4>..... host bus clock speed is 100.8974 MHz.
<4>cpu: 0, clocks: 1008974, slice: 504487
<4>CPU0<T0:1008960,T1:504464,D:9,S:504487,C:1008974>
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>ACPI: Subsystem revision 20020829
<6>PCI: PCI BIOS revision 2.10 entry at 0xf15b0, last bus=1
<6>PCI: Using configuration type 1
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S4 S5)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
<6>PCI: Probing PCI hardware
<6>PCI: Using IRQ router SIS [1039/0961] at 00:02.0
<4>PCI BIOS passed nonexistent PCI bus 0!
<4>PCI BIOS passed nonexistent PCI bus 0!
<4>PCI BIOS passed nonexistent PCI bus 0!
<4>PCI BIOS passed nonexistent PCI bus 0!
<4>PCI BIOS passed nonexistent PCI bus 0!
<4>PCI BIOS passed nonexistent PCI bus 0!
<4>PCI BIOS passed nonexistent PCI bus 0!
<4>PCI BIOS passed nonexistent PCI bus 1!
<4>PCI BIOS passed nonexistent PCI bus 0!
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
<5>apm: overridden by ACPI.
<4>mxt_scan_bios: enter
<4>Starting kswapd
<4>bigpage subsystem: allocated 0 bigpages (=0MB).
<4>allocated 32 pages and 32 bhs reserved for the highmem bounces
<4>kinoded started
<5>VFS: Diskquotas version dquot_6.5.0 initialized
<5>aio_setup: num_physpages = 65535
<5>aio_setup: sizeof(struct page) = 48
<6>vesafb: framebuffer at 0xf0000000, mapped to 0xf8816000, size 65536k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=41
<6>vesafb: protected mode interface info at c000:5606
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>Looking for splash picture.... found (1024x768, 27920 bytes).
<4>Console: switching to colour frame buffer device 106x34
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>SIS5513: IDE controller on PCI bus 00 dev 15
<4>SIS5513: chipset revision 208
<4>SIS5513: not 100%% native mode: will probe irqs later
<4>SiS646 ATA 133 controller
<4> ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
<4> ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
<4>hda: IC35L020AVER07-0, ATA DISK drive
<4>hdb: ST340016A, ATA DISK drive
<4>hdc: PLEXTOR CD-R PX-W1610A, ATAPI CD/DVD-ROM drive
<4>hdd: TOSHIBA CD-ROM XM-6502B, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>blk: queue c037be64, I/O limit 4095Mb (mask 0xffffffff)
<4>hda: safely enabled flush
<6>hda: 40188960 sectors (20577 MB) w/1916KiB Cache, CHS=2501/255/63, UDMA(100)
<4>blk: queue c037bfac, I/O limit 4095Mb (mask 0xffffffff)
<4>hdb: safely enabled flush
<6>hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
<4>ide-floppy driver 0.99.newide
<6>Partition check:
<6> hda: hda1 hda2 < hda5 hda6 >
<6> hdb: hdb1 hdb2 hdb3
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
<6>Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
<4>ide-floppy driver 0.99.newide
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 8192 buckets, 64Kbytes
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 249k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>hdc: no flushcache support
<4>hdd: no flushcache support
<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4> Vendor: PLEXTOR Model: CD-R PX-W1610A Rev: 1.03
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: TOSHIBA Model: CD-ROM XM-6502B Rev: 1013
<4> Type: CD-ROM ANSI SCSI revision: 02
<7>sd_attach()
<7>sd_attach()
<4>hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
<4>hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
<4>hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
<4>hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
<4>hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
<4>hda: DMA disabled
<4>ide0: reset: success
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: checking transaction log (ide0(3,66)) for (ide0(3,66))
<4>reiserfs: using ordered data mode
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 152k freed
<4>blk: queue c037be64, I/O limit 4095Mb (mask 0xffffffff)
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>LVM version 1.0.5(mp-v6)(15/07/2002) module loaded
<6>Adding Swap: 1028120k swap-space (priority 42)
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: checking transaction log (ide0(3,67)) for (ide0(3,67))
<4>reiserfs: using ordered data mode
<4>Using r5 hash to sort names
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Mon Dec 2 01:06:33 2002
Setting up IDE DMA mode
Force IDE DMA mode on: hda
done
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneRun file system check on root for LVM activation
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group
Activating LVM volume groups...
vgchange -- no volume groups found
done
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.28 (31-Aug-2002)
Reiserfs super block in block 16 on 0x342 of format 3.6 with standard journal
Blocks (total/free): 3146731/2753018 by 4096 bytes
Filesystem is clean
Reiserfs super block in block 16 on 0x343 of format 3.6 with standard journal
Blocks (total/free): 6365756/4537705 by 4096 bytes
Filesystem is clean
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hdb3 on /home type reiserfs (rw)
doneRestore device permissions
done
Activating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shm
done
Setting up the CMOS clock
done
Setting up timezone data
done
Setting up hostname 'orca'
done
Setting up loopback interface
done
Enabling syn flood protection
done
Disabling IP forwarding
done
Creating /var/log/boot.msg
done<notice>killproc: kill(30,29)
Running /etc/init.d/boot.local
Boot logging started on /dev/tty1(/dev/console) at Mon Dec 2 09:06:43 2002
Master Resource Control: previous runlevel: N, switching to runlevel:
5
Starting Firewall Initialization (phase 1 of 3)
done<notice>killproc: kill(30,3)
INIT: Entering runlevel: 5
<notice>/etc/init.d/rc5.d/S01SuSEfirewall2_init start
done
<notice>'/etc/init.d/rc5.d/S01SuSEfirewall2_init start' exits with status 0
<notice>/etc/init.d/rc5.d/S01alsasound start
Starting sound driver: emu10k1
done
Restoring the previous sound setting
done
<notice>'/etc/init.d/rc5.d/S01alsasound start' exits with status 0
<notice>/etc/init.d/rc5.d/S01atd start
Starting service at daemon<notice>
done
startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=106 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
<notice>'/etc/init.d/rc5.d/S01atd start' exits with status 0
<notice>/etc/init.d/rc5.d/S01fbset start
<notice>'/etc/init.d/rc5.d/S01fbset start' exits with status 0
<notice>/etc/init.d/rc5.d/S01isdn start
<notice>'/etc/init.d/rc5.d/S01isdn start' exits with status 0
Initializing random number generator<notice>/etc/init.d/rc5.d/S01random start
done
Searching for unresolved configuration files<notice>'/etc/init.d/rc5.d/S01random start' exits with status 0
<notice>/etc/init.d/rc5.d/S01rpmconfigcheck start
done
<notice>'/etc/init.d/rc5.d/S01rpmconfigcheck start' exits with status 0
<notice>/etc/init.d/rc5.d/S02kbd start
Loading keymap qwerty/us.map.gz
doneKeyboard: Typematic Rate set to 24.0 cps (delay = 500 ms)
doneLoading compose table latin1.add
done
Loading console font lat1-16.psfu
doneLoading screenmap none
doneSetting up console ttys
done<notice>'/etc/init.d/rc5.d/S02kbd start' exits with status 0
<notice>/etc/init.d/rc5.d/S02splash start
<notice>'/etc/init.d/rc5.d/S02splash start' exits with status 0
<notice>/etc/init.d/rc5.d/S05network start
Setting up network interfaces:
lo
done
eth0 (DHCP) <notice>startproc: execve (/sbin/dhcpcd) [ /sbin/dhcpcd -H -D -N -Y -t 999999 -h orca eth0 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh OLDPWD=/etc/sysconfig/network INIT_VERSION=sysvinit-2.82 RUN_FROM_RC=yes REDIRECT=/dev/tty1 COLUMNS=106 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=791 RUNLEVEL=5 PWD=/etc/sysconfig/network PREVLEVEL=N LINES=34 HOME=/ SHLVL=4 _=/sbin/startproc DAEMON=/sbin/dhcpcd ]
<notice>pidofproc: dhcpcd 620
. . . . . . . . . . <notice>pidofproc: dhcpcd 620
. . . . . no IP address yet... backgrounding.
done
<notice>'/etc/init.d/rc5.d/S05network start' exits with status 0
<notice>/etc/init.d/rc5.d/S06syslog start
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=106 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>
done
startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=106 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting hotplugging services [<notice>'/etc/init.d/rc5.d/S06syslog start' exits with status 0
<notice>/etc/init.d/rc5.d/S07hotplug start
net pci usb ..^G ]
done
<notice>'/etc/init.d/rc5.d/S07hotplug start' exits with status 0
<notice>/etc/init.d/rc5.d/S08hwscan start
Starting hardware scan on boot<notice>Starting Firewall Initialization (phase 2 of 3) '/etc/init.d/rc5.d/S08hwscan start' exits with status 0
<notice>/etc/init.d/rc5.d/S09SuSEfirewall2_setup start
done
<notice>'/etc/init.d/rc5.d/S09SuSEfirewall2_setup start' exits with status 0
<notice>/etc/init.d/rc5.d/S09portmap start
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=106 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>'/etc/init.d/rc5.d/S09portmap start' exits with status 0
<notice>/etc/init.d/rc5.d/S09smbfs start
Mount SMB File System
unused
<notice>'/etc/init.d/rc5.d/S09smbfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S09splash_early start
<notice>'/etc/init.d/rc5.d/S09splash_early start' exits with status 0
<notice>/etc/init.d/rc5.d/S09sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=106 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc5.d/S09sshd start' exits with status 0
<notice>/etc/init.d/rc5.d/S09xdm start
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=106 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=791 RUNLEVEL=5 LC_COLLATE=POSIX PWD=/ LANG=en_US PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 no_proxy=localhost RC_LC_COLLATE=POSIX WINDOWMANAGER=/usr/X11R6/bin/kde PRINTER=lp RC_LANG=en_US LC_CTYPE=en_US LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
Starting cupsd<notice>'/etc/init.d/rc5.d/S09xdm start' exits with status 0
<notice>/etc/init.d/rc5.d/S10cups start
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=106 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
Starting Name Service Cache Daemon<notice>'/etc/init.d/rc5.d/S10cups start' exits with status 0
<notice>/etc/init.d/rc5.d/S10nscd start
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=106 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>'/etc/init.d/rc5.d/S10nscd start' exits with status 0
<notice>/etc/init.d/rc5.d/S10postfix start
Starting mail service (Postfix)
done
Starting Firewall Initialization (phase 3 of 3) <notice>'/etc/init.d/rc5.d/S10postfix start' exits with status 0
<notice>/etc/init.d/rc5.d/S11SuSEfirewall2_final start
done
<notice>'/etc/init.d/rc5.d/S11SuSEfirewall2_final start' exits with status 0
<notice>/etc/init.d/rc5.d/S11cron start
Starting CRON daemon
done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=106 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
<notice>'/etc/init.d/rc5.d/S11cron start' exits with status 0
<notice>/etc/init.d/rc5.d/S20inetd start
Starting inetd . . . . . . . . . . no service configured
skipped
Master Resource Control: runlevel 5 has been
reached
Skipped services in runlevel 5: inetd
<notice>'/etc/init.d/rc5.d/S20inetd start' exits with status 5
<notice>/etc/init.d/rc5.d/S21splash_late start
<notice>'/etc/init.d/rc5.d/S21splash_late start' exits with status 0
<notice>killproc: kill(249,3)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-12-02 17:17 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-12-02 17:17 boot log m l -duns non scotus- mack
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox