From: Jean-Louis Bach <torrent@linux.kernel.org>
To: linux-smp@vger.kernel.org
Subject: unexpected IOAPIC
Date: Thu, 9 Jan 2003 21:44:10 +0100 [thread overview]
Message-ID: <200301092144.10327@Torrent> (raw)
[-- Attachment #1: Type: text/plain, Size: 144 bytes --]
Booting makes HDD noisy (clac-clac-clac)
Then maping problem
Var/Log/boot;msg says to send it to you
Jean-Louis Bach
jlbach@ifrance.com
[-- Attachment #2: boot.msg --]
[-- Type: text/plain, Size: 23595 bytes --]
Linux version 2.4.18-64GB-SMP (root@SMP_X86.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 SMP Wed Mar 27 13:58:12 UTC 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
found SMP MP-table at 000fb920
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
On node 0 totalpages: 196592
zone(0): 4096 pages.
zone(1): 192496 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 2 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=linux ro root=305 hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1300.085 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2595.22 BogoMIPS
Memory: 770344k/786368k available (1504k kernel code, 15636k reserved, 429k data, 144k init, 0k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After vendor init, caps: 0383fbff c1c3fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After vendor init, caps: 0383fbff c1c3fbff 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU0: AMD Duron(tm) Processor stepping 01
per-CPU timeslice cutoff: 182.78 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-18, 2-20, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 21.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178002
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0002
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 001 01 0 0 0 0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 001 01 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 71
0d 001 01 0 0 0 0 0 1 1 79
0e 001 01 0 0 0 0 0 1 1 81
0f 001 01 0 0 0 0 0 1 1 89
10 001 01 1 1 0 1 0 1 1 91
11 001 01 1 1 0 1 0 1 1 99
12 000 00 1 0 0 0 0 0 0 00
13 001 01 1 1 0 1 0 1 1 A1
14 000 00 1 0 0 0 0 0 0 00
15 001 01 1 1 0 1 0 1 1 A9
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ19 -> 0:19
IRQ21 -> 0:21
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1300.0614 MHz.
..... host bus clock speed is 200.0094 MHz.
cpu: 0, clocks: 2000094, slice: 1000047
CPU0<T0:2000080,T1:1000032,D:1,S:1000047,C:2000094>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router default [1106/3147] at 00:11.0
PCI->APIC IRQ transform: (B0,I5,P0) -> 16
PCI->APIC IRQ transform: (B0,I5,P0) -> 16
PCI->APIC IRQ transform: (B0,I6,P0) -> 17
PCI->APIC IRQ transform: (B0,I8,P0) -> 19
PCI->APIC IRQ transform: (B0,I17,P0) -> 16
PCI->APIC IRQ transform: (B0,I17,P3) -> 21
PCI->APIC IRQ transform: (B0,I17,P3) -> 21
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
mxt_scan_bios: enter
Starting kswapd
kinoded started
VFS: Diskquotas version dquot_6.5.0 initialized
ACPI: APM is already active, exiting
vesafb: framebuffer at 0xda000000, mapped to 0xf080d000, size 4096k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0336
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (1024x768, 42648 bytes).
Console: switching to colour frame buffer device 105x34
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD400BB-00DEA0, ATA DISK drive
hdb: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
hdc: LITE-ON LTR-32125W, ATAPI CD/DVD-ROM drive
hdd: ST340016A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c037ccc4, I/O limit 4095Mb (mask 0xffffffff)
hda: safely enabled flush
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
blk: queue c037d184, I/O limit 4095Mb (mask 0xffffffff)
hdd: safely enabled flush
hdd: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100)
hdb: no flushcache support
hdb: ATAPI 16X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
hdd: [PTBL] [4865/255/63] hdd1 < hdd5 > hdd2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 16 devices)
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.99
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing............done.
Freeing initrd memory: 587k freed
VFS: Mounted root (ext2 filesystem).
hdc: no flushcache support
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-32125W Rev: WBS2
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 240x/40x writer cd/rw xa/form2 cdda tray
reiserfs: checking transaction log (device 03:05) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
change_root: old root has d_count=2
Trying to unmount old root ... okay
Freeing unused kernel memory: 144k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.3(19/02/2002) module loaded
Adding Swap: 1502068k swap-space (priority 42)
Boot logging started on /dev/tty1(/dev/console) at Thu Jan 9 22:35:26 2003
Run file system check on root for LVM activation
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group
Activating LVM volume groups...
vgchange -- no volume groups found
done
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.26 (3-Feb-2002)
Reiserfs super block in block 16 on 0x305 of format 3.6 with standard journal
Blocks (total/free): 7588696/2028724 by 4096 bytes
Filesystem is cleanly umounted
/dev/hda2: clean, 45/12048 files, 5721/48195 blocks
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw)
/dev/hda2 on /boot type ext2 (rw)
doneRestore device permissions
done
Activating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shm
done
Setting up the CMOS clock
done
Setting up timezone data
done
Setting up hostname 'linux'
done
Setting up loopback interface
done
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneCreating /var/log/boot.msg
doneEnabling syn flood protection
done
Disabling IP forwarding
done
<notice>killproc: kill(28,29)
Running /etc/init.d/boot.local
Boot logging started on /dev/tty1(/dev/console) at Thu Jan 9 21:35:32 2003
Master Resource Control: previous runlevel: N, switching to runlevel:
5
Starting Firewall Initialization (phase 1 of 3)
done<notice>killproc: kill(28,3)
INIT: Entering runlevel: 5
<notice>/etc/init.d/rc5.d/S01SuSEfirewall2_init start
done
<notice>'/etc/init.d/rc5.d/S01SuSEfirewall2_init start' exits with status 0
<notice>/etc/init.d/rc5.d/S01isdn start
<notice>'/etc/init.d/rc5.d/S01isdn start' exits with status 0
<notice>/etc/init.d/rc5.d/S01personal-firewall.initial start
Starting personal-firewall (initial) [not active]
unused
<notice>'/etc/init.d/rc5.d/S01personal-firewall.initial start' exits with status 6
<notice>/etc/init.d/rc5.d/S01random start
Initializing random number generator
done
<notice>'/etc/init.d/rc5.d/S01random start' exits with status 0
<notice>/etc/init.d/rc5.d/S05network start
Setting up network interfaces:
lo
done
eth0
done
ppp0
skipped
INFO: Dont worry about skipped interfaces; they will be set up
dynamically by service pcmcia, hotplug or when dialing.
Starting Firewall Initialization (phase 2 of 3) <notice>'/etc/init.d/rc5.d/S05network start' exits with status 0
<notice>/etc/init.d/rc5.d/S06SuSEfirewall2_setup start
done
Starting hotplugging services [<notice>'/etc/init.d/rc5.d/S06SuSEfirewall2_setup start' exits with status 0
<notice>/etc/init.d/rc5.d/S06hotplug start
net pci usbinsmod: insmod: a module named sg already exists
insmod: insmod: insmod char-major-21 failed
insmod: insmod: a module named sg already exists
insmod: insmod: insmod char-major-21 failed
insmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/dabusb.o
insmod: insmod: /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/dabusb.o: No such file or directory
insmod: insmod: insmod /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/dabusb.o failed
insmod: insmod: insmod dabusb failed
^G ]
done
<notice>'/etc/init.d/rc5.d/S06hotplug start' exits with status 0
<notice>/etc/init.d/rc5.d/S07hwscan start
Starting hardware scan on bootinsmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/scanner.o
insmod: Symbol version prefix 'smp_'
^Ginsmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/storage/usb-storage.o
insmod: Symbol version prefix 'smp_'
^G<notice>'/etc/init.d/rc5.d/S07hwscan start' exits with status 0
<notice>/etc/init.d/rc5.d/S07portmap start
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>'/etc/init.d/rc5.d/S07portmap start' exits with status 0
<notice>/etc/init.d/rc5.d/S07splash_early start
<notice>'/etc/init.d/rc5.d/S07splash_early start' exits with status 0
<notice>/etc/init.d/rc5.d/S07sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc5.d/S07sshd start' exits with status 0
<notice>/etc/init.d/rc5.d/S08nfs start
<notice>'/etc/init.d/rc5.d/S08nfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S09alsasound start
Starting sound driver: es1968
done
Restoring the previous sound setting
done
<notice>'/etc/init.d/rc5.d/S09alsasound start' exits with status 0
<notice>/etc/init.d/rc5.d/S09amavis start
Starting virus-scanning for sendmail (amavis)
done
<notice>'/etc/init.d/rc5.d/S09amavis start' exits with status 0
<notice>/etc/init.d/rc5.d/S09atd start
Starting service at daemon
done
<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
<notice>'/etc/init.d/rc5.d/S09atd start' exits with status 0
<notice>/etc/init.d/rc5.d/S09fbset start
<notice>'/etc/init.d/rc5.d/S09fbset start' exits with status 0
<notice>/etc/init.d/rc5.d/S09lpd start
Starting lpdinsmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/media/video/videodev.o
insmod: Symbol version prefix 'smp_'
insmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/ov511.o
^G<notice>startproc: execve (/usr/sbin/lpd) [ /usr/sbin/lpd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/lpd ]
done
<notice>'/etc/init.d/rc5.d/S09lpd start' exits with status 0
<notice>/etc/init.d/rc5.d/S09postfix start
Starting mail service (Postfix)
done
<notice>'/etc/init.d/rc5.d/S09postfix start' exits with status 0
<notice>/etc/init.d/rc5.d/S09suse-blinux start
Starting suse-blinux
<notice>startproc: execve (/usr/lib/suse-blinux/sbl) [ /usr/lib/suse-blinux/sbl ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/lib/suse-blinux/sbl ]
done
<notice>'/etc/init.d/rc5.d/S09suse-blinux start' exits with status 0
<notice>/etc/init.d/rc5.d/S10kbd start
suse-blinux version 1.4
copyright (c) 2000-2002 SuSE GmbH, Nuernberg
Author: Marco Skambraks <marco@suse.de>
Braillex 2d-screen on /dev/ttyS0
Loading keymap azerty/fr-latin1.map.gz
doneLoading compose table winkeys shiftctrl latin1.add
done
Loading console font lat9w-16.psfu
doneLoading screenmap trivial
doneSetting up console ttys
done<notice>'/etc/init.d/rc5.d/S10kbd start' exits with status 0
Initializing SMTP port (sendmail)<notice>/etc/init.d/rc5.d/S10sendmail start
<notice>startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -O DaemonPortOptions=Addr=127.0.0.1 -L sendmail -Am -bd -q30m -om ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ]
sendmail: invalid option -- O
sendmail: fatal: usage: sendmail [options]
sendmail: invalid option -- A
sendmail: fatal: usage: sendmail [options]
done
<notice>startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -L sendmail-client -Ac -q30m ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ]
<notice>'/etc/init.d/rc5.d/S10sendmail start' exits with status 0
<notice>/etc/init.d/rc5.d/S10smbfs start
<notice>'/etc/init.d/rc5.d/S10smbfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S10soundmodem start
<notice>'/etc/init.d/rc5.d/S10soundmodem start' exits with status 0
<notice>/etc/init.d/rc5.d/S10splash start
<notice>'/etc/init.d/rc5.d/S10splash start' exits with status 0
<notice>/etc/init.d/rc5.d/S10xdm start
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ PWD=/ LC_MESSAGES= HOSTNAME=linux CONSOLE=/dev/console RC_LANG=fr_FR@euro PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 QTDIR=/usr/lib/qt3 KDEROOTHOME=/root/.kdm LC_TIME= MACHTYPE=i386-suse-linux RC_LC_COLLATE=POSIX LC_ALL= LINES=34 MAXHOME=/usr/lib/maxwell LANG=fr_FR@euro LC_NUMERIC= SHLVL=2 COLUMNS=105 LC_CTYPE=fr_FR@euro BOOT_IMAGE=linux SHELL=/bin/bash PRINTER=lp HOSTTYPE=i386 OSTYPE=linux WINDOWMANAGER=/usr/X11R6/bin/kde HOME=/ TERM=linux no_proxy=localhost PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 LC_MONETARY= INIT_VERSION=sysvinit-2.82 LC_COLLATE=POSIX _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>'/etc/init.d/rc5.d/S10xdm start' exits with status 0
<notice>/etc/init.d/rc5.d/S11cron start
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
^G
done
Starting Name Service Cache Daemon<notice>'/etc/init.d/rc5.d/S11cron start' exits with status 0
<notice>/etc/init.d/rc5.d/S11nscd start
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>'/etc/init.d/rc5.d/S11nscd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11smpppd start
Starting SMPPPD<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
done
<notice>'/etc/init.d/rc5.d/S11smpppd start' exits with status 0
<notice>/etc/init.d/rc5.d/S20inetd start
Starting inetd<notice>startproc: execve (/usr/sbin/inetd) [ /usr/sbin/inetd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/inetd ]
done
<notice>'/etc/init.d/rc5.d/S20inetd start' exits with status 0
Starting personal-firewall (final) [not active]
unused
<notice>/etc/init.d/rc5.d/S21personal-firewall.final start
<notice>'/etc/init.d/rc5.d/S21personal-firewall.final start' exits with status 6
<notice>/etc/init.d/rc5.d/S22splash_late start
<notice>'/etc/init.d/rc5.d/S22splash_late start' exits with status 0
<notice>/etc/init.d/rc5.d/S23SuSEfirewall2_final start
Starting Firewall Initialization (phase 3 of 3) Warning: No nameservers in /etc/resolv.conf!
done
Master Resource Control: runlevel 5 has been
reached
Skipped services in runlevel 5: personal-firewall.initial personal-firewall.final
<notice>'/etc/init.d/rc5.d/S23SuSEfirewall2_final start' exits with status 0
<notice>killproc: kill(264,3)
reply other threads:[~2003-01-09 20:44 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200301092144.10327@Torrent \
--to=torrent@linux.kernel.org \
--cc=jlbach@ifrance.com \
--cc=linux-smp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox