* kernel BUG at /usr/src/linux-2.4.20/include/asm/spinlock.h:133!
@ 2003-05-28 7:56 Andrey J. Melnikoff (TEMHOTA)
0 siblings, 0 replies; only message in thread
From: Andrey J. Melnikoff (TEMHOTA) @ 2003-05-28 7:56 UTC (permalink / raw)
To: linux-smp
ksymoops 2.4.9 on i686 2.4.21-pre6. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.21-pre6/ (default)
-m /usr/src/linux/System.map (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Error (expand_objects): cannot stat(mad16.o) for mad16
Error (expand_objects): cannot stat(ad1848.o) for ad1848
Error (expand_objects): cannot stat(sb_lib.o) for sb_lib
Error (expand_objects): cannot stat(uart401.o) for uart401
Reading Oops report from the terminal
eip: c0117728
kernel BUG at /usr/src/linux-2.4.20/include/asm/spinlock.h:133!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c0117740>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010086
eax: 0000000e ebx: c57fe440 ecx: 00002cc1 edx: 00000000
esi: c4fa100c edi: 00000246 ebp: c57fe440 esp: c2613ec0
ds: 0018 es: 0018 ss: 0018
Process nmap (pid: 27555, stackpage=c2613000)
Stack: c02b61cd c0117728 c4fa1000 c2612000 c2613efc c0150442 c189f5e0 c726b140
c726b234 00000010 c026faf7 c189f5e0 c50045cc c2613f58 c189f5e0 c189f5e0
00000145 00000010 c0137ae0 c024ee4b c189f5e1 c50045b0 c2613f58 00000000
Call Trace: [<c0117728>] [<c0150442>] [<c026faf7>] [<c0137ae0>] [<c024ee4b>]
[<c015065f>] [<c0150b9f>] [<c010742f>]
Code: 0f 0b 85 00 a0 61 2b c0 83 c4 08 f0 fe 0b 0f 88 0f 19 00 00
>>EIP; c0117740 <session_of_pgrp+10/4c> <=====
>>ebx; c57fe440 <_end+54c6f1c/851fadc>
>>esi; c4fa100c <_end+4c69ae8/851fadc>
>>ebp; c57fe440 <_end+54c6f1c/851fadc>
>>esp; c2613ec0 <_end+22dc99c/851fadc>
Trace; c0117728 <release_task+160/168>
Trace; c0150442 <elf_kcore_store_hdr+24e/2fc>
Trace; c026faf7 <_etext+1b0c/23cd>
Trace; c0137ae0 <pipe_read+90/1e8>
Trace; c024ee4b <tcp_tw_schedule+63/16c>
Trace; c015065f <read_kcore+16f/478>
Trace; c0150b9f <disk_name+237/240>
Trace; c010742f <do_invalid_op+2b/94>
Code; c0117740 <session_of_pgrp+10/4c>
0000000000000000 <_EIP>:
Code; c0117740 <session_of_pgrp+10/4c> <=====
0: 0f 0b ud2a <=====
Code; c0117742 <session_of_pgrp+12/4c>
2: 85 00 test %eax,(%eax)
Code; c0117744 <session_of_pgrp+14/4c>
4: a0 61 2b c0 83 mov 0x83c02b61,%al
Code; c0117749 <session_of_pgrp+19/4c>
9: c4 08 les (%eax),%ecx
Code; c011774b <session_of_pgrp+1b/4c>
b: f0 fe 0b lock decb (%ebx)
Code; c011774e <session_of_pgrp+1e/4c>
e: 0f 88 0f 19 00 00 js 1923 <_EIP+0x1923> c0119063 <__tasklet_schedule+27/44>
Linux BlackLife 2.4.21-pre6 #10 SMP Wed Apr 16 06:44:55 MSD 2003 i686 unknown
Gnu C egcs-2.91.66
Gnu make 3.79
binutils 2.10.1.0.2
util-linux 2.10l
mount 2.10l
modutils 2.3.11
e2fsprogs 1.32
PPP 2.3.11
Linux C Library 2.1.3
ldd: version 1.9.9
Procps 2.0.6
Net-tools 1.55
Kbd 0.99
Sh-utils 2.0
Modules Loaded mad16 ad1848 sb_lib uart401
------------------- /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 3
model name : Pentium II (Klamath)
stepping : 3
cpu MHz : 300.686
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov mmx
bogomips : 599.65
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 3
model name : Pentium II (Klamath)
stepping : 3
cpu MHz : 300.686
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov mmx
bogomips : 601.29
------------------- /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0330-0333 : MPU-401 UART
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0530-0533 : mad16 WSS config
0534-0537 : mad16 WSS
0cf8-0cff : PCI conf1
4000-403f : PCI device 8086:7113
5000-501f : PCI device 8086:7113
e000-e01f : PCI device 8086:7112
e400-e4ff : PCI device 101c:3296
e800-e83f : PCI device 10b7:9050
e800-e83f : 00:13.0
f000-f00f : PCI device 8086:7111
f000-f007 : ide0
f008-f00f : ide1
------------------- /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-07feffff : System RAM
00100000-002ad22d : Kernel code
002ad22e-003259ff : Kernel data
07ff0000-07ff2fff : ACPI Non-volatile Storage
07ff3000-07ffffff : ACPI Tables
d0000000-dfffffff : PCI device 8086:7190
e8000000-efffffff : PCI Bus #01
e8000000-ebffffff : PCI device 5333:8a13
f2000000-f20000ff : PCI device 101c:3296
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
lspci -vvv
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e8000000-efffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin D routed to IRQ 0
Region 4: I/O ports at e000 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:10.0 SCSI storage controller: Western Digital 33C296A
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 1500ns max), cache line size 08
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at e400 [size=256]
Region 1: Memory at f2000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at f0000000 [disabled] [size=64K]
00:13.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at e800 [size=64]
Expansion ROM at f1000000 [disabled] [size=64K]
01:00.0 VGA compatible controller: S3 Inc. 86c368 [Trio 3D/2X] (rev 02) (prog-if 00 [VGA])
Subsystem: S3 Inc. Trio3D/2X
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 63750ns max)
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] AGP version 1.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=x2
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-05-28 7:56 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-05-28 7:56 kernel BUG at /usr/src/linux-2.4.20/include/asm/spinlock.h:133! Andrey J. Melnikoff (TEMHOTA)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox