Symmetric Multiprocessing (SMP) development
 help / color / mirror / Atom feed
* unexpected IO-APIC found
@ 2003-07-06 12:37 Gaius Mulley
  2003-07-06 18:32 ` Randy.Dunlap
  0 siblings, 1 reply; 7+ messages in thread
From: Gaius Mulley @ 2003-07-06 12:37 UTC (permalink / raw)
  To: linux-smp


Hi,

as requested by console messages, here is the complete output of dmesg
from a dual opteron machine. [ The motherboard is MS-9131 SSI ].

I hope the following info is useful and keep up the excellent work!

Gaius


Linux version 2.4.21 (root@lancelot) (gcc version 2.95.4 20011002 (Debian prerelease)) #9 SMP Wed Jul 2 17:15:58 BST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003ffff000 (ACPI data)
 BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
 BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
found SMP MP-table at 000ff780
hm, page 000ff000 reserved twice.
hm, page 00100000 reserved twice.
hm, page 000f9000 reserved twice.
hm, page 000fa000 reserved twice.
On node 0 totalpages: 229376
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
OEM ID: MSI      Product ID: RHAPSODY     APIC at: 0xFEE00000
Processor #0 Unknown CPU [15:5] APIC version 16
Processor #1 Unknown CPU [15:5] APIC version 16
I/O APIC #2 Version 17 at 0xFEC00000.
I/O APIC #3 Version 17 at 0xFEBFF000.
I/O APIC #4 Version 17 at 0xFEBFE000.
Enabling APIC mode: Flat.	Using 3 I/O APICs
Processors: 2
Kernel command line: auto BOOT_IMAGE=Linux ro root=301
Initializing CPU#0
Detected 1395.669 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2785.28 BogoMIPS
Memory: 904628k/917504k available (1461k kernel code, 12488k reserved, 543k data, 112k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 078bfbff e1d3fbff 00000000 00000000
CPU:             Common caps: 078bfbff e1d3fbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 078bfbff e1d3fbff 00000000 00000000
CPU:             Common caps: 078bfbff e1d3fbff 00000000 00000000
CPU0: AMD Opteron(tm) Processor 240 stepping 01
per-CPU timeslice cutoff: 2925.05 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000004
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 2785.28 BogoMIPS
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Intel machine check reporting enabled on CPU#1.
CPU:     After generic, caps: 078bfbff e1d3fbff 00000000 00000000
CPU:             Common caps: 078bfbff e1d3fbff 00000000 00000000
CPU1: AMD Opteron(tm) Processor 240 stepping 01
Total of 2 processors activated (5570.56 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
Setting 3 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 3 ... ok.
Setting 4 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 4 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-9, 2-10, 2-11, 2-16, 2-17, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 4-0, 4-3 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 18.
number of IO-APIC #2 registers: 24.
number of IO-APIC #3 registers: 4.
number of IO-APIC #4 registers: 4.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 02000000
.......     : arbitration: 02
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 003 03  0    0    0   0   0    1    1    39
 02 003 03  0    0    0   0   0    1    1    31
 03 003 03  0    0    0   0   0    1    1    41
 04 003 03  0    0    0   0   0    1    1    49
 05 003 03  0    0    0   0   0    1    1    51
 06 003 03  0    0    0   0   0    1    1    59
 07 003 03  0    0    0   0   0    1    1    61
 08 003 03  0    0    0   0   0    1    1    69
 09 000 00  1    0    0   0   0    0    0    00
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 003 03  0    0    0   0   0    1    1    71
 0d 003 03  0    0    0   0   0    1    1    79
 0e 003 03  0    0    0   0   0    1    1    81
 0f 003 03  0    0    0   0   0    1    1    89
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 003 03  1    1    0   1   0    1    1    91
 13 003 03  1    1    0   1   0    1    1    99
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00

IO APIC #3......
.... register #00: 03000000
.......    : physical APIC id: 03
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00030011
.......     : max redirection entries: 0003
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 000 00  1    0    0   0   0    0    0    00
 02 000 00  1    0    0   0   0    0    0    00
 03 000 00  1    0    0   0   0    0    0    00

IO APIC #4......
.... register #00: 04000000
.......    : physical APIC id: 04
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00030011
.......     : max redirection entries: 0003
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 003 03  1    1    0   1   0    1    1    A1
 02 003 03  1    1    0   1   0    1    1    A9
 03 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ29 -> 2:1
IRQ30 -> 2:2
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1395.6658 MHz.
..... host bus clock speed is 199.3808 MHz.
cpu: 0, clocks: 1993808, slice: 664602
CPU0<T0:1993808,T1:1329200,D:6,S:664602,C:1993808>
cpu: 1, clocks: 1993808, slice: 664602
CPU1<T0:1993808,T1:664592,D:12,S:664602,C:1993808>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1022/746b] at 00:07.3
PCI->APIC IRQ transform: (B0,I7,P3) -> 19
PCI->APIC IRQ transform: (B1,I0,P3) -> 19
PCI->APIC IRQ transform: (B1,I0,P3) -> 19
PCI->APIC IRQ transform: (B1,I6,P0) -> 18
PCI->APIC IRQ transform: (B3,I2,P0) -> 29
PCI->APIC IRQ transform: (B3,I2,P1) -> 30
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
FDC 0 is a post-1991 82077
tg3.c:v1.5 (March 21, 2003)
eth0: Tigon3 [partno(BCM95704A6) rev 2002 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:10:dc:fe:c7:e5
eth1: Tigon3 [partno(BCM95704A6) rev 2002 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:10:dc:fe:c7:e4
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: WDC WD1200JB-00DUA3, ATA DISK drive
hdc: MATSHITADVD-ROM SR-8587, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63
hdc: attached ide-scsi driver.
Partition check:
 hda: hda1 hda2 hda3
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: MATSHITA  Model: DVD-ROM SR-8587   Rev: 5S26
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
usb.c: registered new driver hub
host/uhci.c: USB Universal Host Controller Interface driver v1.1
usb.c: registered new driver usbnet
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack version 2.1 (7168 buckets, 57344 max) - 292 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 112k freed
Adding Swap: 489972k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
keyboard: Timeout - AT keyboard not present?(f4)
keyboard: Timeout - AT keyboard not present?(f4)
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 64
isofs_read_super: bread failed, dev=16:00, iso_blknum=16, block=32
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 64
isofs_read_super: bread failed, dev=16:00, iso_blknum=16, block=32
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 64
isofs_read_super: bread failed, dev=16:00, iso_blknum=16, block=32
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A

^ permalink raw reply	[flat|nested] 7+ messages in thread
* Unexpected IO-APIC found.
@ 2003-08-11 13:29 Adrian Baugh
  0 siblings, 0 replies; 7+ messages in thread
From: Adrian Baugh @ 2003-08-11 13:29 UTC (permalink / raw)
  To: linux-smp

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

[adrian@vulcan adrian]$ uname -a
Linux vulcan.localhost 2.4.21-0.25mdk #1 Thu Jul 24 13:10:52 MDT 2003 i686 
unknown unknown GNU/Linux

Below follows the bits from dmesg about the APIC. I'm running a 
single-processor machine. If I've missed anything out, or there is more 
information from elsewhere, please let me know and I'll provide it.

ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not 
co
nnected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178003
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0003
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  1    1    0   1   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1999.1656 MHz.
..... host bus clock speed is 266.5553 MHz.
cpu: 0, clocks: 2665553, slice: 1332776
CPU0<T0:2665552,T1:1332768,D:8,S:1332776,C:2665553>

Regards,

Adrian Baugh.
- -- 
             GPG public key available at
http://freespace.virgin.net/a-j-e.baugh/misc/signature
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)

iD8DBQE/N5pQAovIPXNNRBwRArTLAJwMQHDVlRtBL/Ew+STzmiYcgheMwACeP8c2
TAkqKThxokVoHiKkSRJGmLk=
=XAZo
-----END PGP SIGNATURE-----


^ permalink raw reply	[flat|nested] 7+ messages in thread
* Unexpected IO-APIC found
@ 2003-03-27 23:28 Tony Battersby
  0 siblings, 0 replies; 7+ messages in thread
From: Tony Battersby @ 2003-03-27 23:28 UTC (permalink / raw)
  To: linux-smp

I am trying to get a SMP kernel to run on a particular UP machine, but I get
the message "An unexpected IO-APIC was found. If this kernel release is less
than three months old please report this to linux-smp@vger.kernel.org".  The
kernel boots OK but PCI devices don't work (presumably because of lost
interrupts).  To verify that the problem was not specifically SMP-releated,
I compiled a UP kernel with "Local APIC support on uniprocessors" and
"IO-APIC support on uniprocessors" turned on.  The same thing happened: I
got the "An unexpected IO-APIC was found" message on boot and PCI devices
didn't work.  I was initially using kernel 2.4.20 but also tried 2.4.21-pre6
with the same results.

There is an option in the BIOS to disable the APIC.  When I do this,
everything works fine.  However, this is not a good solution for me for
various other reasons that are not relevant here.

Any help or info on this would be greatly appreciated.

Anthony J. Battersby
Cybernetics

-------------------------------------------------------------

Motherboard: Shuttle FS50 V1.3
CPU: 1.7 GHz Pentium 4
North Bridge: SiS 650
South Bridge: SiS 961

The information below is from the UP kernel 2.4.21-pre6 with "Local APIC
support on uniprocessors" and "IO-APIC support on uniprocessors" turned on
and the APIC enabled in the BIOS.

-------------------------------------------------------------

dmesg output

6

IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0])
INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x0] trigger[0x0])
1 CPUs total
Local APIC address fee00000
Enabling the CPU's according to the ACPI table
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat.	Using 1 I/O APICs
Processors: 1
Kernel command line: auto BOOT_IMAGE=linux ro root=301
Initializing CPU#0
Detected 1693.754 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3381.65 BogoMIPS
Memory: 95196k/98240k available (964k kernel code, 2660k reserved, 273k
data, 92k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU:     After generic, caps: 3febfbff 00000000 00000000 00000000
CPU:             Common caps: 3febfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-5, 2-7, 2-10, 2-11, 2-12, 2-17, 2-21, 2-22 not
connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 19.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00178014
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0014
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 000 00  1    0    0   0   0    0    0    00
 06 001 01  0    0    0   0   0    1    1    51
 07 000 00  1    0    0   0   0    0    0    00
 08 001 01  0    0    0   0   0    1    1    59
 09 001 01  0    0    0   0   0    1    1    61
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 000 00  1    0    0   0   0    0    0    00
 0d 001 01  0    0    0   0   0    1    1    69
 0e 001 01  0    0    0   0   0    1    1    71
 0f 001 01  0    0    0   0   0    1    1    79
 10 001 01  1    1    0   1   0    1    1    81
 11 000 00  1    0    0   0   0    0    0    00
 12 001 01  1    1    0   1   0    1    1    89
 13 001 01  1    1    0   1   0    1    1    91
 14 001 01  1    1    0   1   0    1    1    99
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 001 01  1    1    0   1   0    1    1    A1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1693.7110 MHz.
..... host bus clock speed is 99.6299 MHz.
cpu: 0, clocks: 996299, slice: 498149
CPU0<T0:996288,T1:498128,D:11,S:498149,C:996299>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb570, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1039/0650] at 00:00.0
PCI->APIC IRQ transform: (B0,I2,P3) -> 20
PCI->APIC IRQ transform: (B0,I2,P0) -> 23
PCI->APIC IRQ transform: (B0,I11,P0) -> 18
PCI->APIC IRQ transform: (B0,I11,P1) -> 19
PCI->APIC IRQ transform: (B0,I15,P0) -> 18
PCI->APIC IRQ transform: (B0,I16,P0) -> 19
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS650    ATA 100 controller
    ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio
hda: ST36450A, ATA DISK drive
blk: queue c0283480, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 12594960 sectors (6449 MB) w/448KiB Cache, CHS=784/255/63, DMA
Partition check:
 hda: hda1 hda2
SCSI subsystem driver Revision: 1.00
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 92k freed
usb.c: registered new driver serial
usbserial.c: USB Serial Driver core v1.4
usbserial.c: USB Serial support registered for FTDI SIO
usbserial.c: USB Serial support registered for FTDI 8U232AM
ftdi_sio.c: v1.2.1:USB FTDI Serial Converters Driver
usbserial.c: USB Serial deregistering driver FTDI SIO
usbserial.c: USB Serial deregistering driver FTDI 8U232AM
usb.c: deregistering driver serial
usb.c: registered new driver serial
usbserial.c: USB Serial Driver core v1.4
usbserial.c: USB Serial support registered for FTDI SIO
usbserial.c: USB Serial support registered for FTDI 8U232AM
ftdi_sio.c: v1.2.1:USB FTDI Serial Converters Driver
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
emlog: version 0.40 running, using major number 241
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xc6841000, 00:30:1b:10:2e:bd, IRQ 18
eth0:  Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability
40a1.

-------------------------------------------------------------

lspci -vvv output (sorry, no PCI device name database)

00:00.0 Class 0600: 1039:0650 (rev 01)
	Subsystem: 1039:0650
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
	Latency: 32
	Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=128M]
	Capabilities: [c0] AGP version 2.0
		Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 Class 0604: 1039:0001
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: e1000000-e10fffff
	Prefetchable memory behind bridge: d8000000-dfffffff
	BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:02.0 Class 0601: 1039:0008
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 0

00:02.2 Class 0c03: 1039:7001 (rev 07) (prog-if 10)
	Subsystem: 1039:7001
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR+
	Latency: 32 (20000ns max), cache line size 08
	Interrupt: pin D routed to IRQ 20
	Region 0: Memory at e1104000 (32-bit, non-prefetchable) [size=4K]

00:02.3 Class 0c03: 1039:7001 (rev 07) (prog-if 10)
	Subsystem: 1039:7001
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR+
	Latency: 32 (20000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at e1105000 (32-bit, non-prefetchable) [size=4K]

00:02.5 Class 0101: 1039:5513 (rev d0) (prog-if 80 [Master])
	Subsystem: 1039:5513
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 128
	Region 4: I/O ports at 4000 [size=16]

00:0b.0 Class 0100: 1000:0021 (rev 01)
	Subsystem: 1000:1020
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 72 (4250ns min, 4500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at e000 [size=256]
	Region 1: Memory at e1107000 (64-bit, non-prefetchable) [size=1K]
	Region 3: Memory at e1100000 (64-bit, non-prefetchable) [size=8K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.1 Class 0100: 1000:0021 (rev 01)
	Subsystem: 1000:1020
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 72 (4250ns min, 4500ns max), cache line size 08
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at e400 [size=256]
	Region 1: Memory at e1106000 (64-bit, non-prefetchable) [size=1K]
	Region 3: Memory at e1102000 (64-bit, non-prefetchable) [size=8K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 Class 0200: 10ec:8139 (rev 10)
	Subsystem: 10ec:8139
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 32 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at e800 [size=256]
	Region 1: Memory at e1108000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 Class 0c00: 11c1:5811 (rev 04) (prog-if 10)
	Subsystem: 1297:f024
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 32 (3000ns min, 6000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at e1109000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 Class 0300: 1039:6325
	Subsystem: 1039:6325
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 16
	BIST result: 00
	Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
	Region 1: Memory at e1000000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at d000 [size=128]
	Capabilities: [40] Power Management version 1
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] AGP version 2.0
		Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

-------------------------------------------------------------

cat /proc/cpuinfo

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 15
model		: 1
model name	: Intel(R) Pentium(R) 4 CPU 1.70GHz
stepping	: 3
cpu MHz		: 1693.754
cache size	: 256 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips	: 3381.65

-------------------------------------------------------------

cat /proc/interrupts

           CPU0
  0:       9011    IO-APIC-edge  timer
  1:        565    IO-APIC-edge  keyboard
  2:          0          XT-PIC  cascade
  8:          0    IO-APIC-edge  rtc
 14:        369    IO-APIC-edge  ide0
 18:          0   IO-APIC-level  eth0
NMI:          0
LOC:       8965
ERR:          0
MIS:          0

-------------------------------------------------------------

cat /proc/iomem

00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000d0000-000d07ff : Extension ROM
000f0000-000fffff : System ROM
00100000-05feffff : System RAM
  00100000-001f1234 : Kernel code
  001f1235-00235a1f : Kernel data
05ff0000-05ff2fff : ACPI Non-volatile Storage
05ff3000-05ffffff : ACPI Tables
d0000000-d7ffffff : PCI device 1039:0650
d8000000-dfffffff : PCI Bus #01
  d8000000-dfffffff : PCI device 1039:6325
e1000000-e10fffff : PCI Bus #01
  e1000000-e101ffff : PCI device 1039:6325
e1100000-e1101fff : PCI device 1000:0021
e1102000-e1103fff : PCI device 1000:0021
e1104000-e1104fff : PCI device 1039:7001
e1105000-e1105fff : PCI device 1039:7001
e1106000-e11063ff : PCI device 1000:0021
e1107000-e11073ff : PCI device 1000:0021
e1108000-e11080ff : PCI device 10ec:8139
  e1108000-e11080ff : 8139too
e1109000-e1109fff : PCI device 11c1:5811
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved

-------------------------------------------------------------

cat /proc/ioports

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
4000-400f : PCI device 1039:5513
  4000-4007 : ide0
  4008-400f : ide1
d000-dfff : PCI Bus #01
  d000-d07f : PCI device 1039:6325
e000-e0ff : PCI device 1000:0021
e400-e4ff : PCI device 1000:0021
e800-e8ff : PCI device 10ec:8139
  e800-e8ff : 8139too

-------------------------------------------------------------

cat /proc/version

Linux version 2.4.21-pre6 (tony@carnivore.engr.ccg.com) (gcc version 2.96
20000731 (Red Hat Linux 7.3 2.96-112)) #1 Thu Mar 27 17:19:38 EST 2003

-------------------------------------------------------------


^ permalink raw reply	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2003-08-11 13:29 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-07-06 12:37 unexpected IO-APIC found Gaius Mulley
2003-07-06 18:32 ` Randy.Dunlap
2003-07-06 22:20   ` Gaius Mulley
2003-07-07 21:21     ` Randy.Dunlap
2003-07-08 10:35       ` Gaius Mulley
  -- strict thread matches above, loose matches on Subject: below --
2003-08-11 13:29 Unexpected " Adrian Baugh
2003-03-27 23:28 Tony Battersby

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox