* PROBLEM: DAC960 kernel driver hangs with SMP enabled
@ 2002-06-21 1:22 David McIlwraith
2002-06-21 11:53 ` Burkhard Bunk
0 siblings, 1 reply; 2+ messages in thread
From: David McIlwraith @ 2002-06-21 1:22 UTC (permalink / raw)
To: linux-kernel, linux-smp
[1.] One line summary of the problem:
DAC960 driver hangs at boot with SMP enabled
[2.] Full description of the problem/report:
The DAC960 driver, after displaying its 2-line initial version message,
hangs at boot, on a Linux 2.4.18 kernel with SMP enabled. I tested Linux
version 2.2.21 kernel as well; I encountered the same problem. After
disabling SMP [and no other options] the driver performed correctly.
The controller in question is a DAC960PG, running with the latest
firmware from http://www.mylex.com/. No problems have been encountered
with any other operating systems.
I attempted to use patches I had found on the [linux-smp], [linux-kernel]
mailing lists, referring to
a deadlock occurring with this driver and SMP. However, the kernel still
refused to boot correctly.
[3.] Keywords:
kernel, DAC960, Mylex, RAID, SCSI
[4.] Kernel version:
Linux version 2.4.x with SMP, 2.2.x with SMP
[5.] Output of Oops.. message:
Not applicable.
[6.] A small shell script or program which triggers the problem:
Not applicable.
[7.] Environment
The machine in question is an NEC Express5800/130A Pro dual processor
system, with 2x Pentium Pro 200MHz processors, running Debian 2.2.
[7.1.] Software
Linux linux 2.4.18 #7 Thu Jun 20 15:09:48 EST 2002 i686 unknown
Gnu C 2.95.2
Gnu make 3.79.1
binutils 2.9.5.0.37
util-linux
util-linux Note: /usr/bin/fdformat is obsolete and is no longer
available.
util-linux Please use /usr/bin/superformat instead (make sure
you have the
util-linux fdutils package installed first). Also, there had
been some
util-linux major changes from version 4.x. Please refer to the
documentation.
util-linux
mount 2.10f
modutils 2.3.11
e2fsprogs 1.18
PPP 2.3.11
Linux C Library 2.1.3
ldd: version 1.9.11
Procps 2.0.6
Net-tools 1.54
Console-tools 0.2.3
Sh-utils 2.0
[7.2.] Processor information:
Note: only one processor shown, since kernel with SMP fails to boot;
however, both processors are identical.
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 1
model name : Pentium Pro
stepping : 9
cpu MHz : 198.961
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
bogomips : 396.49
[7.3.] Module information:
Not applicable; kernel was built without module support.
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
IO ports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : Compaq Computer Corporation Triflex Dual EIDE Controller
01f0-01f7 : Compaq Computer Corporation Triflex Dual EIDE Controller
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : Compaq Computer Corporation Triflex Dual EIDE Controller
03c0-03df : vga+
03f6-03f6 : Compaq Computer Corporation Triflex Dual EIDE Controller
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
d000-dfff : PCI Bus #02
d400-d4ff : Realtek Semiconductor Co., Ltd. RTL-8139
d400-d4ff : 8139too
d800-d8ff : Adaptec AIC-7860
d800-d8ff : aic7xxx
dce0-dcff : Intel Corp. 82557 [Ethernet Pro 100]
dce0-dcff : eepro100
ecf0-ecff : Compaq Computer Corporation Triflex Dual EIDE Controller
ecf0-ecf7 : ide0
IO memory:
00000000-0009efff : System RAM
0009f000-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000c87ff : Extension ROM
000c8800-000cb7ff : Extension ROM
000f0000-000fffff : System ROM
00100000-0fffffff : System RAM
00100000-0021332e : Kernel code
0021332f-002582cb : Kernel data
fceee000-fceeffff : Mylex Corporation DAC960PX
fd000000-fe9fffff : PCI Bus #02
fd000000-fdffffff : Cirrus Logic GD 5446
fe800000-fe8fffff : Intel Corp. 82557 [Ethernet Pro 100]
fe9fd000-fe9fdfff : Intel Corp. 82557 [Ethernet Pro 100]
fe9fd000-fe9fdfff : eepro100
fe9fe000-fe9fefff : Adaptec AIC-7860
fe9fe000-fe9fefff : aic7xxx
fe9ff800-fe9ff8ff : Realtek Semiconductor Co., Ltd. RTL-8139
fe9ff800-fe9ff8ff : 8139too
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff8119-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Relience Computer: Unknown device 0005
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 48 set, cache line size 08
00:0a.0 PCI bridge: Intel Corporation 80960RP [i960 RP
Microprocessor/Bridge] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 set, cache line size 08
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: ff000000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:0a.1 RAID bus controller: Mylex Corporation DAC960PX (rev 01)
Subsystem: Mylex Corporation: Unknown device 0010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 set, cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at fceee000 (32-bit, prefetchable) [size=8K]
Expansion ROM at <unassigned> [disabled] [size=32K]
00:0b.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 01)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 123 set, cache line size 08
Bus: primary=00, secondary=02, subordinate=02, sec-latency=68
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fd000000-fe9fffff
Prefetchable memory behind bridge: 00000000ff000000-0000000000000000
BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:0f.0 ISA bridge: Compaq Computer Corporation Triflex PCI to ISA Bridge
(rev 0c)
Subsystem: Compaq Computer Corporation: Unknown device a0f3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 set
00:0f.1 IDE interface: Compaq Computer Corporation: Unknown device ae33 (rev
0a) (prog-if ea)
Subsystem: Compaq Computer Corporation: Unknown device ae33
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 set
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at ecf0 [size=16]
02:06.0 VGA compatible controller: Cirrus Logic GD 5446 (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Region 0: Memory at fd000000 (32-bit, prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled] [size=32K]
02:07.0 SCSI storage controller: Adaptec AIC-7860 (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 4 min, 4 max, 64 set, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d800 [disabled] [size=256]
Region 1: Memory at fe9fe000 (32-bit, non-prefetchable) [size=4K]
02:08.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev
01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 8 min, 56 max, 66 set
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fe9fd000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at dce0 [size=32]
Region 2: Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled] [size=1M]
02:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RT8139 (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 min, 64 max, 64 set
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at fe9ff800 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices: none
[7.7.] Other information that might be relevant to the problem
Data from: /proc/rd/c0/current_status [controller 0 information]
***** DAC960 RAID Driver Version 2.4.11 of 11 October 2001 *****
Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
Configuring Mylex DAC960PG PCI RAID Controller
Firmware Version: 4.06-0-08, Channels: 1, Memory Size: 4MB
PCI Bus: 0, Device: 10, Function: 1, I/O Address: Unassigned
PCI Address: 0xFCEEE000 mapped at 0xD0800000, IRQ Channel: 9
Controller Queue Depth: 64, Maximum Blocks per Command: 128
Driver Queue Depth: 63, Scatter/Gather Limit: 33 of 33 Segments
Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 128/32
Physical Devices:
0:0 Vendor: SEAGATE Model: ST34371W Revision: 0484
Serial Number: JDP417330J6N3C
Disk Status: Online, 8495104 blocks
0:1 Vendor: SEAGATE Model: ST34371W Revision: 0484
Serial Number: JDY9579709XP48
Disk Status: Online, 8495104 blocks
0:2 Vendor: SEAGATE Model: ST34572WC Revision: 0784
Serial Number: JK2616440V0B9K
Disk Status: Online, 8888320 blocks
0:6 Vendor: SDR Model: GEM200 Revision: 1
Logical Drives:
/dev/rd/c0d0: RAID-0, Online, 25485312 blocks, Write Thru
No Rebuild or Consistency Check in Progress
[X.] Other notes, patches, fixes, workarounds:
In order to boot this kernel, I also had to add a patch which is
referenced at http://linux-kernel.skylab.org/20011125/msg01431.html. As
the author of the DAC960 driver notes, "the Linux kernel team has
consistently refused to add the boot patches to init/main.c". However,
this is an entirely separate issue to the SMP conflict.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: PROBLEM: DAC960 kernel driver hangs with SMP enabled
2002-06-21 1:22 PROBLEM: DAC960 kernel driver hangs with SMP enabled David McIlwraith
@ 2002-06-21 11:53 ` Burkhard Bunk
0 siblings, 0 replies; 2+ messages in thread
From: Burkhard Bunk @ 2002-06-21 11:53 UTC (permalink / raw)
To: David McIlwraith; +Cc: linux-kernel, linux-smp
Hallo,
I understand that your system works with boot option "nosmp", right?
This implies "noapic" in a sence, AFAIK.
Try with "noapic" alone, this may allow you to use both processors.
It worked for me in a similar case (dual Pentium Pro 200, old hardware).
Regards,
Burkhard Bunk.
----------------------------------------------------------------------
bunk@physik.hu-berlin.de Physics Institute, Humboldt University
fax: ++49-30 2093 7628 Invalidenstr. 110
phone: ++49-30 2093 7980 10115 Berlin, Germany
----------------------------------------------------------------------
On Fri, 21 Jun 2002, David McIlwraith wrote:
> [1.] One line summary of the problem:
> DAC960 driver hangs at boot with SMP enabled
> [2.] Full description of the problem/report:
> The DAC960 driver, after displaying its 2-line initial version message,
> hangs at boot, on a Linux 2.4.18 kernel with SMP enabled. I tested Linux
> version 2.2.21 kernel as well; I encountered the same problem. After
> disabling SMP [and no other options] the driver performed correctly.
> The controller in question is a DAC960PG, running with the latest
> firmware from http://www.mylex.com/. No problems have been encountered
> with any other operating systems.
>
> I attempted to use patches I had found on the [linux-smp], [linux-kernel]
> mailing lists, referring to
> a deadlock occurring with this driver and SMP. However, the kernel still
> refused to boot correctly.
> [3.] Keywords:
> kernel, DAC960, Mylex, RAID, SCSI
> [4.] Kernel version:
> Linux version 2.4.x with SMP, 2.2.x with SMP
> [5.] Output of Oops.. message:
> Not applicable.
> [6.] A small shell script or program which triggers the problem:
> Not applicable.
> [7.] Environment
> The machine in question is an NEC Express5800/130A Pro dual processor
> system, with 2x Pentium Pro 200MHz processors, running Debian 2.2.
> [7.1.] Software
> Linux linux 2.4.18 #7 Thu Jun 20 15:09:48 EST 2002 i686 unknown
>
> Gnu C 2.95.2
> Gnu make 3.79.1
> binutils 2.9.5.0.37
> util-linux
> util-linux Note: /usr/bin/fdformat is obsolete and is no longer
> available.
> util-linux Please use /usr/bin/superformat instead (make sure
> you have the
> util-linux fdutils package installed first). Also, there had
> been some
> util-linux major changes from version 4.x. Please refer to the
> documentation.
> util-linux
> mount 2.10f
> modutils 2.3.11
> e2fsprogs 1.18
> PPP 2.3.11
> Linux C Library 2.1.3
> ldd: version 1.9.11
> Procps 2.0.6
> Net-tools 1.54
> Console-tools 0.2.3
> Sh-utils 2.0
> [7.2.] Processor information:
> Note: only one processor shown, since kernel with SMP fails to boot;
> however, both processors are identical.
>
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 1
> model name : Pentium Pro
> stepping : 9
> cpu MHz : 198.961
> cache size : 256 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> bogomips : 396.49
> [7.3.] Module information:
> Not applicable; kernel was built without module support.
> [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
> IO ports:
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-007f : rtc
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : Compaq Computer Corporation Triflex Dual EIDE Controller
> 01f0-01f7 : Compaq Computer Corporation Triflex Dual EIDE Controller
> 01f0-01f7 : ide0
> 02f8-02ff : serial(set)
> 0376-0376 : Compaq Computer Corporation Triflex Dual EIDE Controller
> 03c0-03df : vga+
> 03f6-03f6 : Compaq Computer Corporation Triflex Dual EIDE Controller
> 03f6-03f6 : ide0
> 03f8-03ff : serial(set)
> 0cf8-0cff : PCI conf1
> d000-dfff : PCI Bus #02
> d400-d4ff : Realtek Semiconductor Co., Ltd. RTL-8139
> d400-d4ff : 8139too
> d800-d8ff : Adaptec AIC-7860
> d800-d8ff : aic7xxx
> dce0-dcff : Intel Corp. 82557 [Ethernet Pro 100]
> dce0-dcff : eepro100
> ecf0-ecff : Compaq Computer Corporation Triflex Dual EIDE Controller
> ecf0-ecf7 : ide0
>
> IO memory:
> 00000000-0009efff : System RAM
> 0009f000-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000c8000-000c87ff : Extension ROM
> 000c8800-000cb7ff : Extension ROM
> 000f0000-000fffff : System ROM
> 00100000-0fffffff : System RAM
> 00100000-0021332e : Kernel code
> 0021332f-002582cb : Kernel data
> fceee000-fceeffff : Mylex Corporation DAC960PX
> fd000000-fe9fffff : PCI Bus #02
> fd000000-fdffffff : Cirrus Logic GD 5446
> fe800000-fe8fffff : Intel Corp. 82557 [Ethernet Pro 100]
> fe9fd000-fe9fdfff : Intel Corp. 82557 [Ethernet Pro 100]
> fe9fd000-fe9fdfff : eepro100
> fe9fe000-fe9fefff : Adaptec AIC-7860
> fe9fe000-fe9fefff : aic7xxx
> fe9ff800-fe9ff8ff : Realtek Semiconductor Co., Ltd. RTL-8139
> fe9ff800-fe9ff8ff : 8139too
> fec00000-fec00fff : reserved
> fee00000-fee00fff : reserved
> ffff8119-ffffffff : reserved
> [7.5.] PCI information ('lspci -vvv' as root)
>
> 00:00.0 Host bridge: Relience Computer: Unknown device 0005
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR+ FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort+ >SERR- <PERR-
> Latency: 48 set, cache line size 08
>
> 00:0a.0 PCI bridge: Intel Corporation 80960RP [i960 RP
> Microprocessor/Bridge] (rev 01) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 64 set, cache line size 08
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: ff000000-000fffff
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>
> 00:0a.1 RAID bus controller: Mylex Corporation DAC960PX (rev 01)
> Subsystem: Mylex Corporation: Unknown device 0010
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 64 set, cache line size 08
> Interrupt: pin A routed to IRQ 9
> Region 0: Memory at fceee000 (32-bit, prefetchable) [size=8K]
> Expansion ROM at <unassigned> [disabled] [size=32K]
>
> 00:0b.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 01)
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR+ FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 123 set, cache line size 08
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=68
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fd000000-fe9fffff
> Prefetchable memory behind bridge: 00000000ff000000-0000000000000000
> BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
>
> 00:0f.0 ISA bridge: Compaq Computer Corporation Triflex PCI to ISA Bridge
> (rev 0c)
> Subsystem: Compaq Computer Corporation: Unknown device a0f3
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 0 set
>
> 00:0f.1 IDE interface: Compaq Computer Corporation: Unknown device ae33 (rev
> 0a) (prog-if ea)
> Subsystem: Compaq Computer Corporation: Unknown device ae33
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 0 set
> Interrupt: pin A routed to IRQ 0
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374
> Region 4: I/O ports at ecf0 [size=16]
>
> 02:06.0 VGA compatible controller: Cirrus Logic GD 5446 (prog-if 00 [VGA])
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Region 0: Memory at fd000000 (32-bit, prefetchable) [size=16M]
> Expansion ROM at <unassigned> [disabled] [size=32K]
>
> 02:07.0 SCSI storage controller: Adaptec AIC-7860 (rev 01)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 4 min, 4 max, 64 set, cache line size 08
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at d800 [disabled] [size=256]
> Region 1: Memory at fe9fe000 (32-bit, non-prefetchable) [size=4K]
>
> 02:08.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev
> 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 8 min, 56 max, 66 set
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at fe9fd000 (32-bit, prefetchable) [size=4K]
> Region 1: I/O ports at dce0 [size=32]
> Region 2: Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
> Expansion ROM at <unassigned> [disabled] [size=1M]
>
> 02:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RT8139 (rev 10)
> Subsystem: Realtek Semiconductor Co., Ltd. RT8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 32 min, 64 max, 64 set
> Interrupt: pin A routed to IRQ 9
> Region 0: I/O ports at d400 [size=256]
> Region 1: Memory at fe9ff800 (32-bit, non-prefetchable) [size=256]
> Expansion ROM at <unassigned> [disabled] [size=64K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME-
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> [7.6.] SCSI information (from /proc/scsi/scsi)
> Attached devices: none
> [7.7.] Other information that might be relevant to the problem
> Data from: /proc/rd/c0/current_status [controller 0 information]
>
> ***** DAC960 RAID Driver Version 2.4.11 of 11 October 2001 *****
> Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
> Configuring Mylex DAC960PG PCI RAID Controller
> Firmware Version: 4.06-0-08, Channels: 1, Memory Size: 4MB
> PCI Bus: 0, Device: 10, Function: 1, I/O Address: Unassigned
> PCI Address: 0xFCEEE000 mapped at 0xD0800000, IRQ Channel: 9
> Controller Queue Depth: 64, Maximum Blocks per Command: 128
> Driver Queue Depth: 63, Scatter/Gather Limit: 33 of 33 Segments
> Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 128/32
> Physical Devices:
> 0:0 Vendor: SEAGATE Model: ST34371W Revision: 0484
> Serial Number: JDP417330J6N3C
> Disk Status: Online, 8495104 blocks
> 0:1 Vendor: SEAGATE Model: ST34371W Revision: 0484
> Serial Number: JDY9579709XP48
> Disk Status: Online, 8495104 blocks
> 0:2 Vendor: SEAGATE Model: ST34572WC Revision: 0784
> Serial Number: JK2616440V0B9K
> Disk Status: Online, 8888320 blocks
> 0:6 Vendor: SDR Model: GEM200 Revision: 1
> Logical Drives:
> /dev/rd/c0d0: RAID-0, Online, 25485312 blocks, Write Thru
> No Rebuild or Consistency Check in Progress
> [X.] Other notes, patches, fixes, workarounds:
> In order to boot this kernel, I also had to add a patch which is
> referenced at http://linux-kernel.skylab.org/20011125/msg01431.html. As
> the author of the DAC960 driver notes, "the Linux kernel team has
> consistently refused to add the boot patches to init/main.c". However,
> this is an entirely separate issue to the SMP conflict.
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-smp" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-06-21 11:53 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-06-21 1:22 PROBLEM: DAC960 kernel driver hangs with SMP enabled David McIlwraith
2002-06-21 11:53 ` Burkhard Bunk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox