[PATCH AUTOSEL 5.10 01/51] ARC: build: remove non-existing bootpImage from KBUILD_IMAGE

[PATCH AUTOSEL 5.10 01/51] ARC: build: remove non-existing bootpImage from KBUILD_IMAGE

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 9836720911cfec25d3fbdead1c438bf87e0f2841 ]

The deb-pkg builds for ARCH=arc fail.

  $ export CROSS_COMPILE=<your-arc-compiler-prefix>
  $ make -s ARCH=arc defconfig
  $ make ARCH=arc bindeb-pkg
  SORTTAB vmlinux
  SYSMAP  System.map
  MODPOST Module.symvers
  make KERNELRELEASE=5.10.0-rc4 ARCH=arc KBUILD_BUILD_VERSION=2 -f ./Makefile intdeb-pkg
  sh ./scripts/package/builddeb
  cp: cannot stat 'arch/arc/boot/bootpImage': No such file or directory
  make[4]: *** [scripts/Makefile.package:87: intdeb-pkg] Error 1
  make[3]: *** [Makefile:1527: intdeb-pkg] Error 2
  make[2]: *** [debian/rules:13: binary-arch] Error 2
  dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
  make[1]: *** [scripts/Makefile.package:83: bindeb-pkg] Error 2
  make: *** [Makefile:1527: bindeb-pkg] Error 2

The reason is obvious; arch/arc/Makefile sets $(boot)/bootpImage as
the default image, but there is no rule to build it.

Remove the meaningless KBUILD_IMAGE assignment so it will fallback
to the default vmlinux. With this change, you can build the deb package.

I removed the 'bootpImage' target as well. At best, it provides
'make bootpImage' as an alias of 'make vmlinux', but I do not see
much sense in doing so.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/Makefile | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 0c6bf0d1df7ad..acf99420e161d 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -102,12 +102,6 @@ libs-y		+= arch/arc/lib/ $(LIBGCC)
 
 boot		:= arch/arc/boot
 
-#default target for make without any arguments.
-KBUILD_IMAGE	:= $(boot)/bootpImage
-
-all:	bootpImage
-bootpImage: vmlinux
-
 boot_targets += uImage uImage.bin uImage.gz
 
 $(boot_targets): vmlinux
-- 
2.27.0


_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc

[PATCH AUTOSEL 5.10 02/51] ARC: build: add uImage.lzma to the top-level target

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit f2712ec76a5433e5ec9def2bd52a95df1f96d050 ]

arch/arc/boot/Makefile supports uImage.lzma, but you cannot do
'make uImage.lzma' because the corresponding target is missing
in arch/arc/Makefile. Add it.

I also changed the assignment operator '+=' to ':=' since this is the
only place where we expect this variable to be set.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index acf99420e161d..61a41123ad4c4 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -102,7 +102,7 @@ libs-y		+= arch/arc/lib/ $(LIBGCC)
 
 boot		:= arch/arc/boot
 
-boot_targets += uImage uImage.bin uImage.gz
+boot_targets := uImage uImage.bin uImage.gz uImage.lzma
 
 $(boot_targets): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-- 
2.27.0


_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc

[PATCH AUTOSEL 5.10 03/51] ARC: build: add boot_targets to PHONY

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 0cfccb3c04934cdef42ae26042139f16e805b5f7 ]

The top-level boot_targets (uImage and uImage.*) should be phony
targets. They just let Kbuild descend into arch/arc/boot/ and create
files there.

If a file exists in the top directory with the same name, the boot
image will not be created.

You can confirm it by the following steps:

  $ export CROSS_COMPILE=<your-arc-compiler-prefix>
  $ make -s ARCH=arc defconfig all   # vmlinux will be built
  $ touch uImage.gz
  $ make ARCH=arc uImage.gz
  CALL    scripts/atomic/check-atomics.sh
  CALL    scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  # arch/arc/boot/uImage.gz is not created

Specify the targets as PHONY to fix this.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 61a41123ad4c4..cf9da9aea12ac 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -104,6 +104,7 @@ boot		:= arch/arc/boot
 
 boot_targets := uImage uImage.bin uImage.gz uImage.lzma
 
+PHONY += $(boot_targets)
 $(boot_targets): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
-- 
2.27.0


_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc

[PATCH AUTOSEL 5.10 04/51] ARC: build: move symlink creation to arch/arc/Makefile to avoid race

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit c5e6ae563c802c4d828d42e134af64004db2e58c ]

If you run 'make uImage uImage.gz' with the parallel option, uImage.gz
will be created by two threads simultaneously.

This is because arch/arc/Makefile does not specify the dependency
between uImage and uImage.gz. Hence, GNU Make assumes they can be
built in parallel. One thread descends into arch/arc/boot/ to create
uImage, and another to create uImage.gz.

Please notice the same log is displayed twice in the following steps:

  $ export CROSS_COMPILE=<your-arc-compiler-prefix>
  $ make -s ARCH=arc defconfig
  $ make -j$(nproc) ARCH=arc uImage uImage.gz
  [ snip ]
    LD      vmlinux
    SORTTAB vmlinux
    SYSMAP  System.map
    OBJCOPY arch/arc/boot/vmlinux.bin
    OBJCOPY arch/arc/boot/vmlinux.bin
    GZIP    arch/arc/boot/vmlinux.bin.gz
    GZIP    arch/arc/boot/vmlinux.bin.gz
    UIMAGE  arch/arc/boot/uImage.gz
    UIMAGE  arch/arc/boot/uImage.gz
  Image Name:   Linux-5.10.0-rc4-00003-g62f23044
  Created:      Sun Nov 22 02:52:26 2020
  Image Type:   ARC Linux Kernel Image (gzip compressed)
  Data Size:    2109376 Bytes = 2059.94 KiB = 2.01 MiB
  Load Address: 80000000
  Entry Point:  80004000
    Image arch/arc/boot/uImage is ready
  Image Name:   Linux-5.10.0-rc4-00003-g62f23044
  Created:      Sun Nov 22 02:52:26 2020
  Image Type:   ARC Linux Kernel Image (gzip compressed)
  Data Size:    2815455 Bytes = 2749.47 KiB = 2.69 MiB
  Load Address: 80000000
  Entry Point:  80004000

This is a race between the two threads trying to write to the same file
arch/arc/boot/uImage.gz. This is a potential problem that can generate
a broken file.

I fixed a similar problem for ARM by commit 3939f3345050 ("ARM: 8418/1:
add boot image dependencies to not generate invalid images").

I highly recommend to avoid such build rules that cause a race condition.

Move the uImage rule to arch/arc/Makefile.

Another strangeness is that arch/arc/boot/Makefile compares the
timestamps between $(obj)/uImage and $(obj)/uImage.*:

  $(obj)/uImage: $(obj)/uImage.$(suffix-y)
          @ln -sf $(notdir $<) $@
          @echo '  Image $@ is ready'

This does not work as expected since $(obj)/uImage is a symlink.
The symlink should be created in a phony target rule.

I used $(kecho) instead of echo to suppress the message
'Image arch/arc/boot/uImage is ready' when the -s option is given.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/Makefile      | 13 ++++++++++++-
 arch/arc/boot/Makefile | 11 +----------
 2 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index cf9da9aea12ac..578bdbbb0fa7f 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -102,11 +102,22 @@ libs-y		+= arch/arc/lib/ $(LIBGCC)
 
 boot		:= arch/arc/boot
 
-boot_targets := uImage uImage.bin uImage.gz uImage.lzma
+boot_targets := uImage.bin uImage.gz uImage.lzma
 
 PHONY += $(boot_targets)
 $(boot_targets): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
+uimage-default-y			:= uImage.bin
+uimage-default-$(CONFIG_KERNEL_GZIP)	:= uImage.gz
+uimage-default-$(CONFIG_KERNEL_LZMA)	:= uImage.lzma
+
+PHONY += uImage
+uImage: $(uimage-default-y)
+	@ln -sf $< $(boot)/uImage
+	@$(kecho) '  Image $(boot)/uImage is ready'
+
+CLEAN_FILES += $(boot)/uImage
+
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile
index 538b92f4dd253..3b1f8a69a89ef 100644
--- a/arch/arc/boot/Makefile
+++ b/arch/arc/boot/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-targets := vmlinux.bin vmlinux.bin.gz uImage
+targets := vmlinux.bin vmlinux.bin.gz
 
 # uImage build relies on mkimage being availble on your host for ARC target
 # You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
@@ -13,11 +13,6 @@ LINUX_START_TEXT = $$(readelf -h vmlinux | \
 UIMAGE_LOADADDR    = $(CONFIG_LINUX_LINK_BASE)
 UIMAGE_ENTRYADDR   = $(LINUX_START_TEXT)
 
-suffix-y := bin
-suffix-$(CONFIG_KERNEL_GZIP)	:= gz
-suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
-
-targets += uImage
 targets += uImage.bin
 targets += uImage.gz
 targets += uImage.lzma
@@ -42,7 +37,3 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
 
 $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE
 	$(call if_changed,uimage,lzma)
-
-$(obj)/uImage: $(obj)/uImage.$(suffix-y)
-	@ln -sf $(notdir $<) $@
-	@echo '  Image $@ is ready'
-- 
2.27.0


_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc

[PATCH AUTOSEL 5.10 34/51] arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARC

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 8a48c0a3360bf2bf4f40c980d0ec216e770e58ee ]

fs/dax.c uses copy_user_page() but ARC does not provide that interface,
resulting in a build error.

Provide copy_user_page() in <asm/page.h>.

../fs/dax.c: In function 'copy_cow_page_dax':
../fs/dax.c:702:2: error: implicit declaration of function 'copy_user_page'; did you mean 'copy_to_user_page'? [-Werror=implicit-function-declaration]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Dan Williams <dan.j.williams@intel.com>
#Acked-by: Vineet Gupta <vgupta@synopsys.com> # v1
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
#Reviewed-by: Ira Weiny <ira.weiny@intel.com> # v2
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/include/asm/page.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
index b0dfed0f12be0..d9c264dc25fcb 100644
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -10,6 +10,7 @@
 #ifndef __ASSEMBLY__
 
 #define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
 #define copy_page(to, from)		memcpy((to), (from), PAGE_SIZE)
 
 struct vm_area_struct;
-- 
2.27.0


_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc