From: "Sylwester Nawrocki" <s.nawrocki@samsung.com>
To: "'Marek Szyprowski'" <m.szyprowski@samsung.com>
Cc: "'Liam Girdwood'" <lgirdwood@gmail.com>,
"'Mark Brown'" <broonie@kernel.org>,
"'Charles Keepax'" <ckeepax@opensource.cirrus.com>,
"'Krzysztof Kozlowski'" <krzk@kernel.org>,
"'Simon Shields'" <simon@lineageos.org>,
"'Artur Weber'" <aweber.kernel@gmail.com>,
<patches@opensource.cirrus.com>, <linux-sound@vger.kernel.org>
Subject: RE: [PATCH 1/4] ASoC: wm8994: fix MCLK gating for AIF clocks sourced from MCLK2
Date: Wed, 21 Oct 2026 17:17:54 +0200 [thread overview]
Message-ID: <000101dd616f$59517e40$0bf47ac0$@samsung.com> (raw)
In-Reply-To: <20261021101750.3297770-2-m.szyprowski@samsung.com>
> -----Original Message-----
> From: Marek Szyprowski <m.szyprowski@samsung.com>
> Sent: środa, 21 października 2026 12:18
> Cc: Marek Szyprowski <m.szyprowski@samsung.com>; Liam Girdwood
> <lgirdwood@gmail.com>; Mark Brown <broonie@kernel.org>; Sylwester
> Nawrocki <s.nawrocki@samsung.com>; Charles Keepax
> <ckeepax@opensource.cirrus.com>; Krzysztof Kozlowski <krzk@kernel.org>;
> Simon Shields <simon@lineageos.org>; Artur Weber
> <aweber.kernel@gmail.com>; patches@opensource.cirrus.com; linux-
> sound@vger.kernel.org
> Subject: [PATCH 1/4] ASoC: wm8994: fix MCLK gating for AIF clocks sourced
> from MCLK2
>
> aif_mclk_set() masks the AIFnCLK_SRC field of the AIFn clocking
> register, but compares the result with unshifted field values. The
> MCLK2 source (0x08) therefore never matches, so MCLK2 is never enabled
> for an AIF clocked from it, and the AIF relies on other users of that
> clock to keep it running.
>
> On the Exynos4412 Trats2 board, AIF1 and SYSCLK run from MCLK2, the
> 32768Hz PMIC clock, while the codec is idle. That clock is shared with
> the WLAN and Bluetooth chips, which enable it only once their drivers
> are loaded. Until then the codec runs from a stopped clock: FLL1 fails
> to lock when configured from that state, and the codec floods the
> kernel log with FIFO error interrupts once a digital path is powered
> up:
>
> wm8994-codec wm8994-codec: Timed out waiting for FLL lock
> wm8994-codec wm8994-codec: FIFO error
>
> Booting with clk_ignore_unused, which keeps that clock running from
> the bootloader, makes both issues disappear.
>
> Fixing just the comparison is not enough. The AIF clock source can
> be changed while the AIF clock is running, for example the Midas
> machine driver switches AIF1 between MCLK2 and FLL1 while AIF1CLK is
> kept enabled for jack detection. Looking up the clock again on disable
> can then release a different MCLK than the one enabled, leaking the
> enable count of one clock and underflowing the other.
>
> Shift the field value before decoding it, and remember which MCLK has
> been enabled for each AIF, so that the same clock is released on
> disable. While at it, report the MCLK number 1-based in the error
> message.
>
> Fixes: 001b83d395ab ("ASoC: wm8994: Add support for MCLKn clock
> gating")
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
next prev parent reply other threads:[~2026-10-21 15:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20261021101815eucas1p2f6dd40fb230ab01b36c7d8f3eada0f45@eucas1p2.samsung.com>
2026-10-21 10:17 ` [PATCH 0/4] ASoC: wm8994/midas_wm1811: fix codec clocking issues Marek Szyprowski
2026-10-21 10:17 ` [PATCH 1/4] ASoC: wm8994: fix MCLK gating for AIF clocks sourced from MCLK2 Marek Szyprowski
2026-10-21 14:39 ` Charles Keepax
2026-10-21 15:17 ` Sylwester Nawrocki [this message]
2026-10-21 15:24 ` Mark Brown
2026-10-21 10:17 ` [PATCH 2/4] ASoC: wm8994: don't lose the AIF clock ratio when staying at 32kHz SYSCLK Marek Szyprowski
2026-10-21 14:21 ` Charles Keepax
2026-10-21 15:22 ` Sylwester Nawrocki
2026-10-21 10:17 ` [PATCH 3/4] ASoC: wm8994: fix MCLK index used for setting MCLK rate Marek Szyprowski
2026-10-21 13:57 ` Charles Keepax
2026-10-21 15:23 ` Sylwester Nawrocki
2026-10-21 10:17 ` [PATCH 4/4] ASoC: samsung: midas_wm1811: run FLL1 at the AIF1 configured rate when idle Marek Szyprowski
2026-10-21 15:31 ` Sylwester Nawrocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000101dd616f$59517e40$0bf47ac0$@samsung.com' \
--to=s.nawrocki@samsung.com \
--cc=aweber.kernel@gmail.com \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.cirrus.com \
--cc=krzk@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-sound@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=patches@opensource.cirrus.com \
--cc=simon@lineageos.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox