[PATCH AUTOSEL 6.1 01/25] ASoC: Intel: bytcr_rt5640: Apply Asus T100TA quirk to Asus T100TAM too

[PATCH AUTOSEL 6.1 01/25] ASoC: Intel: bytcr_rt5640: Apply Asus T100TA quirk to Asus T100TAM too

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit e50729d742ec364895f1c389c32315984a987aa5 ]

The Asus T100TA quirk has been using an exact match on a product-name of
"T100TA" but there are also T100TAM variants with a slightly higher
clocked CPU and a metal backside which need the same quirk.

Sort the existing T100TA (stereo speakers) below the more specific
T100TAF (mono speaker) quirk and switch from exact matching to
substring matching so that the T100TA quirk will also match on
the T100TAM models.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20240407191559.21596-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 094445036c20f..d6ef8e850412b 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -636,28 +636,30 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_USE_AMCR0F28),
 	},
 	{
+		/* Asus T100TAF, unlike other T100TA* models this one has a mono speaker */
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"),
 		},
 		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
 					BYT_RT5640_JD_SRC_JD2_IN4N |
 					BYT_RT5640_OVCD_TH_2000UA |
 					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_MONO_SPEAKER |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_SSP0_AIF2 |
 					BYT_RT5640_MCLK_EN),
 	},
 	{
+		/* Asus T100TA and T100TAM, must come after T100TAF (mono spk) match */
 		.matches = {
-			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"),
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"),
 		},
 		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
 					BYT_RT5640_JD_SRC_JD2_IN4N |
 					BYT_RT5640_OVCD_TH_2000UA |
 					BYT_RT5640_OVCD_SF_0P75 |
-					BYT_RT5640_MONO_SPEAKER |
-					BYT_RT5640_DIFF_MIC |
-					BYT_RT5640_SSP0_AIF2 |
 					BYT_RT5640_MCLK_EN),
 	},
 	{
-- 
2.43.0

[PATCH AUTOSEL 6.1 03/25] ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating

[Sasha Levin]

From: Derek Fang <derek.fang@realtek.com>

[ Upstream commit 103abab975087e1f01b76fcb54c91dbb65dbc249 ]

The codec leaves tie combo jack's sleeve/ring2 to floating status
default. It would cause electric noise while connecting the active
speaker jack during boot or shutdown.
This patch requests a gpio to control the additional jack circuit
to tie the contacts to the ground or floating.

Signed-off-by: Derek Fang <derek.fang@realtek.com>

Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5645.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index aac9140749968..0bb70066111b7 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -441,6 +441,7 @@ struct rt5645_priv {
 	struct regmap *regmap;
 	struct i2c_client *i2c;
 	struct gpio_desc *gpiod_hp_det;
+	struct gpio_desc *gpiod_cbj_sleeve;
 	struct snd_soc_jack *hp_jack;
 	struct snd_soc_jack *mic_jack;
 	struct snd_soc_jack *btn_jack;
@@ -3179,6 +3180,9 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse
 		regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2,
 			RT5645_CBJ_MN_JD, 0);
 
+		if (rt5645->gpiod_cbj_sleeve)
+			gpiod_set_value(rt5645->gpiod_cbj_sleeve, 1);
+
 		msleep(600);
 		regmap_read(rt5645->regmap, RT5645_IN1_CTRL3, &val);
 		val &= 0x7;
@@ -3195,6 +3199,8 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse
 			snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
 			snd_soc_dapm_sync(dapm);
 			rt5645->jack_type = SND_JACK_HEADPHONE;
+			if (rt5645->gpiod_cbj_sleeve)
+				gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
 		}
 		if (rt5645->pdata.level_trigger_irq)
 			regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
@@ -3220,6 +3226,9 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse
 		if (rt5645->pdata.level_trigger_irq)
 			regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
 				RT5645_JD_1_1_MASK, RT5645_JD_1_1_INV);
+
+		if (rt5645->gpiod_cbj_sleeve)
+			gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
 	}
 
 	return rt5645->jack_type;
@@ -3931,6 +3940,16 @@ static int rt5645_i2c_probe(struct i2c_client *i2c)
 			return ret;
 	}
 
+	rt5645->gpiod_cbj_sleeve = devm_gpiod_get_optional(&i2c->dev, "cbj-sleeve",
+							   GPIOD_OUT_LOW);
+
+	if (IS_ERR(rt5645->gpiod_cbj_sleeve)) {
+		ret = PTR_ERR(rt5645->gpiod_cbj_sleeve);
+		dev_info(&i2c->dev, "failed to initialize gpiod, ret=%d\n", ret);
+		if (ret != -ENOENT)
+			return ret;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(rt5645->supplies); i++)
 		rt5645->supplies[i].supply = rt5645_supply_names[i];
 
@@ -4174,6 +4193,9 @@ static void rt5645_i2c_remove(struct i2c_client *i2c)
 	cancel_delayed_work_sync(&rt5645->jack_detect_work);
 	cancel_delayed_work_sync(&rt5645->rcclock_work);
 
+	if (rt5645->gpiod_cbj_sleeve)
+		gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
+
 	regulator_bulk_disable(ARRAY_SIZE(rt5645->supplies), rt5645->supplies);
 }
 
@@ -4189,6 +4211,9 @@ static void rt5645_i2c_shutdown(struct i2c_client *i2c)
 		0);
 	msleep(20);
 	regmap_write(rt5645->regmap, RT5645_RESET, 0);
+
+	if (rt5645->gpiod_cbj_sleeve)
+		gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
 }
 
 static struct i2c_driver rt5645_i2c_driver = {
-- 
2.43.0

[PATCH AUTOSEL 6.1 04/25] ASoC: dt-bindings: rt5645: add cbj sleeve gpio property

[Sasha Levin]

From: Derek Fang <derek.fang@realtek.com>

[ Upstream commit 306b38e3fa727d22454a148a364123709e356600 ]

Add an optional gpio property to control external CBJ circuits
to avoid some electric noise caused by sleeve/ring2 contacts floating.

Signed-off-by: Derek Fang <derek.fang@realtek.com>

Link: https://msgid.link/r/20240408091057.14165-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/devicetree/bindings/sound/rt5645.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt
index 41a62fd2ae1ff..c1fa379f5f3ea 100644
--- a/Documentation/devicetree/bindings/sound/rt5645.txt
+++ b/Documentation/devicetree/bindings/sound/rt5645.txt
@@ -20,6 +20,11 @@ Optional properties:
   a GPIO spec for the external headphone detect pin. If jd-mode = 0,
   we will get the JD status by getting the value of hp-detect-gpios.
 
+- cbj-sleeve-gpios:
+  a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
+  contacts to the ground or floating. It could avoid some electric noise from the
+  active speaker jacks.
+
 - realtek,in2-differential
   Boolean. Indicate MIC2 input are differential, rather than single-ended.
 
@@ -68,6 +73,7 @@ codec: rt5650@1a {
 	compatible = "realtek,rt5650";
 	reg = <0x1a>;
 	hp-detect-gpios = <&gpio 19 0>;
+	cbj-sleeve-gpios = <&gpio 20 0>;
 	interrupt-parent = <&gpio>;
 	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 	realtek,dmic-en = "true";
-- 
2.43.0

[PATCH AUTOSEL 6.1 06/25] ASoC: rt715: add vendor clear control register

[Sasha Levin]

From: Jack Yu <jack.yu@realtek.com>

[ Upstream commit cebfbc89ae2552dbb58cd9b8206a5c8e0e6301e9 ]

Add vendor clear control register in readable register's
callback function. This prevents an access failure reported
in Intel CI tests.

Signed-off-by: Jack Yu <jack.yu@realtek.com>
Closes: https://github.com/thesofproject/linux/issues/4860
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/6a103ce9134d49d8b3941172c87a7bd4@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt715-sdw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/rt715-sdw.c b/sound/soc/codecs/rt715-sdw.c
index 4e61e16470eda..4e35b67b01ce8 100644
--- a/sound/soc/codecs/rt715-sdw.c
+++ b/sound/soc/codecs/rt715-sdw.c
@@ -111,6 +111,7 @@ static bool rt715_readable_register(struct device *dev, unsigned int reg)
 	case 0x839d:
 	case 0x83a7:
 	case 0x83a9:
+	case 0x752001:
 	case 0x752039:
 		return true;
 	default:
-- 
2.43.0

[PATCH AUTOSEL 6.1 07/25] ASoC: rt715-sdca: volume step modification

[Sasha Levin]

From: Jack Yu <jack.yu@realtek.com>

[ Upstream commit bda16500dd0b05e2e047093b36cbe0873c95aeae ]

Volume step (dB/step) modification to fix format error
which shown in amixer control.

Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/b1f546ad16dc4c7abb7daa7396e8345c@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt715-sdca.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/rt715-sdca.c b/sound/soc/codecs/rt715-sdca.c
index ce8bbc76199a8..3377846a87539 100644
--- a/sound/soc/codecs/rt715-sdca.c
+++ b/sound/soc/codecs/rt715-sdca.c
@@ -315,7 +315,7 @@ static int rt715_sdca_set_amp_gain_8ch_get(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
-static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -17625, 375, 0);
+static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -1725, 75, 0);
 static const DECLARE_TLV_DB_SCALE(mic_vol_tlv, 0, 1000, 0);
 
 static int rt715_sdca_get_volsw(struct snd_kcontrol *kcontrol,
@@ -476,7 +476,7 @@ static const struct snd_kcontrol_new rt715_sdca_snd_controls[] = {
 			RT715_SDCA_FU_VOL_CTRL, CH_01),
 		SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_ADC7_27_VOL,
 			RT715_SDCA_FU_VOL_CTRL, CH_02),
-			0x2f, 0x7f, 0,
+			0x2f, 0x3f, 0,
 		rt715_sdca_set_amp_gain_get, rt715_sdca_set_amp_gain_put,
 		in_vol_tlv),
 	RT715_SDCA_EXT_TLV("FU02 Capture Volume",
@@ -484,13 +484,13 @@ static const struct snd_kcontrol_new rt715_sdca_snd_controls[] = {
 			RT715_SDCA_FU_VOL_CTRL, CH_01),
 		rt715_sdca_set_amp_gain_4ch_get,
 		rt715_sdca_set_amp_gain_4ch_put,
-		in_vol_tlv, 4, 0x7f),
+		in_vol_tlv, 4, 0x3f),
 	RT715_SDCA_EXT_TLV("FU06 Capture Volume",
 		SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_ADC10_11_VOL,
 			RT715_SDCA_FU_VOL_CTRL, CH_01),
 		rt715_sdca_set_amp_gain_4ch_get,
 		rt715_sdca_set_amp_gain_4ch_put,
-		in_vol_tlv, 4, 0x7f),
+		in_vol_tlv, 4, 0x3f),
 	/* MIC Boost Control */
 	RT715_SDCA_BOOST_EXT_TLV("FU0E Boost",
 		SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_DMIC_GAIN_EN,
-- 
2.43.0

[PATCH AUTOSEL 6.1 13/25] ASoC: da7219-aad: fix usage of device_get_named_child_node()

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit e8a6a5ad73acbafd98e8fd3f0cbf6e379771bb76 ]

The documentation for device_get_named_child_node() mentions this
important point:

"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"

Add fwnode_handle_put() to avoid a leaked reference.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153033.38500-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/da7219-aad.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c
index c8410769188a0..d613f1074524a 100644
--- a/sound/soc/codecs/da7219-aad.c
+++ b/sound/soc/codecs/da7219-aad.c
@@ -638,8 +638,10 @@ static struct da7219_aad_pdata *da7219_aad_fw_to_pdata(struct device *dev)
 		return NULL;
 
 	aad_pdata = devm_kzalloc(dev, sizeof(*aad_pdata), GFP_KERNEL);
-	if (!aad_pdata)
+	if (!aad_pdata) {
+		fwnode_handle_put(aad_np);
 		return NULL;
+	}
 
 	aad_pdata->irq = i2c->irq;
 
@@ -714,6 +716,8 @@ static struct da7219_aad_pdata *da7219_aad_fw_to_pdata(struct device *dev)
 	else
 		aad_pdata->adc_1bit_rpt = DA7219_AAD_ADC_1BIT_RPT_1;
 
+	fwnode_handle_put(aad_np);
+
 	return aad_pdata;
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.1 14/25] ALSA: hda: intel-dsp-config: harden I2C/I2S codec detection

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 79ac4c1443eaec0d09355307043a9149287f23c1 ]

The SOF driver is selected whenever specific I2C/I2S HIDs are reported
as 'present' in the ACPI DSDT. In some cases, an HID is reported but
the hardware does not actually rely on I2C/I2S.  This false positive
leads to an invalid selection of the SOF driver and as a result an
invalid topology is loaded.

This patch hardens the detection with a check that the NHLT table is
consistent with the report of an I2S-based codec in DSDT. This table
should expose at least one SSP endpoint configured for an I2S-codec
connection.

Tested on Huawei Matebook D14 (NBLB-WAX9N) using an HDaudio codec with
an invalid ES8336 ACPI HID reported:

[    7.858249] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    7.858312] snd_hda_intel 0000:00:1f.3: snd_intel_dsp_find_config: no valid SSP found for HID ESSX8336, skipped

Reported-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Closes: https://github.com/thesofproject/linux/issues/4934
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Message-ID: <20240426152818.38443-1-pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/intel-dsp-config.c | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c
index bc03b5692983c..f1de386604a10 100644
--- a/sound/hda/intel-dsp-config.c
+++ b/sound/hda/intel-dsp-config.c
@@ -511,9 +511,32 @@ static const struct config_entry *snd_intel_dsp_find_config
 		if (table->codec_hid) {
 			int i;
 
-			for (i = 0; i < table->codec_hid->num_codecs; i++)
-				if (acpi_dev_present(table->codec_hid->codecs[i], NULL, -1))
+			for (i = 0; i < table->codec_hid->num_codecs; i++) {
+				struct nhlt_acpi_table *nhlt;
+				bool ssp_found = false;
+
+				if (!acpi_dev_present(table->codec_hid->codecs[i], NULL, -1))
+					continue;
+
+				nhlt = intel_nhlt_init(&pci->dev);
+				if (!nhlt) {
+					dev_warn(&pci->dev, "%s: NHLT table not found, skipped HID %s\n",
+						 __func__, table->codec_hid->codecs[i]);
+					continue;
+				}
+
+				if (intel_nhlt_has_endpoint_type(nhlt, NHLT_LINK_SSP) &&
+				    intel_nhlt_ssp_endpoint_mask(nhlt, NHLT_DEVICE_I2S))
+					ssp_found = true;
+
+				intel_nhlt_free(nhlt);
+
+				if (ssp_found)
 					break;
+
+				dev_warn(&pci->dev, "%s: no valid SSP found for HID %s, skipped\n",
+					 __func__, table->codec_hid->codecs[i]);
+			}
 			if (i == table->codec_hid->num_codecs)
 				continue;
 		}
-- 
2.43.0

Re: [PATCH AUTOSEL 6.1 03/25] ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 562 bytes --]

Hi!

> The codec leaves tie combo jack's sleeve/ring2 to floating status
> default. It would cause electric noise while connecting the active
> speaker jack during boot or shutdown.
> This patch requests a gpio to control the additional jack circuit
> to tie the contacts to the ground or floating.
> 
> Signed-off-by: Derek Fang <derek.fang@realtek.com>

AFAICT this is unused in -stable, as we don't have corresponding dts
change. Please drop.

Best regards,
								Pavel
-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH AUTOSEL 6.1 04/25] ASoC: dt-bindings: rt5645: add cbj sleeve gpio property

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 554 bytes --]

Hi!

> Add an optional gpio property to control external CBJ circuits
> to avoid some electric noise caused by sleeve/ring2 contacts floating.
> 
> Signed-off-by: Derek Fang <derek.fang@realtek.com>

AFAICT this is unused in -stable, as we don't have corresponding dts
change (this is just docs). Please drop.

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]