Linux Sound subsystem development
 help / color / mirror / Atom feed
From: Vasiliy Kovalev <kovalev@altlinux.org>
To: Takashi Iwai <tiwai@suse.com>, Jaroslav Kysela <perex@perex.cz>,
	linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	bo liu <bo.liu@senarytech.com>
Cc: Vasiliy Kovalev <kovalev@altlinux.org>
Subject: [PATCH v2] ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2
Date: Wed,  9 Oct 2024 16:42:48 +0300	[thread overview]
Message-ID: <20241009134248.662175-1-kovalev@altlinux.org> (raw)

There is a problem with simultaneous audio output to headphones and
speakers, and when headphones are turned off, the speakers also turn
off and do not turn them on.

However, it was found that if you boot linux immediately after windows,
there are no such problems. When comparing alsa-info, the only difference
is the different configuration of Node 0x1d:

working conf. (windows): Pin-ctls: 0x80: HP
not working     (linux): Pin-ctls: 0xc0: OUT HP

This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the
described problem.

Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
---
 sound/pci/hda/patch_conexant.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index b61ce5e6f5ec5..956cb71c3bee1 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -303,6 +303,7 @@ enum {
 	CXT_FIXUP_HP_SPECTRE,
 	CXT_FIXUP_HP_GATE_MIC,
 	CXT_FIXUP_MUTE_LED_GPIO,
+	CXT_FIXUP_HP_ELITEONE_OUT_DIS,
 	CXT_FIXUP_HP_ZBOOK_MUTE_LED,
 	CXT_FIXUP_HEADSET_MIC,
 	CXT_FIXUP_HP_MIC_NO_PRESENCE,
@@ -320,6 +321,19 @@ static void cxt_fixup_stereo_dmic(struct hda_codec *codec,
 	spec->gen.inv_dmic_split = 1;
 }
 
+/* fix widget control pin settings */
+static void cxt_fixup_update_pinctl(struct hda_codec *codec,
+				   const struct hda_fixup *fix, int action)
+{
+	if (action == HDA_FIXUP_ACT_PROBE) {
+		/* Unset OUT_EN for this Node pin, leaving only HP_EN.
+		 * This is the value stored in the codec register after
+		 * the correct initialization of the previous windows boot.
+		 */
+		snd_hda_set_pin_ctl(codec, 0x1d, AC_PINCTL_HP_EN);
+	}
+}
+
 static void cxt5066_increase_mic_boost(struct hda_codec *codec,
 				   const struct hda_fixup *fix, int action)
 {
@@ -971,6 +985,10 @@ static const struct hda_fixup cxt_fixups[] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = cxt_fixup_mute_led_gpio,
 	},
+	[CXT_FIXUP_HP_ELITEONE_OUT_DIS] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = cxt_fixup_update_pinctl,
+	},
 	[CXT_FIXUP_HP_ZBOOK_MUTE_LED] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = cxt_fixup_hp_zbook_mute_led,
@@ -1061,6 +1079,7 @@ static const struct snd_pci_quirk cxt5066_fixups[] = {
 	SND_PCI_QUIRK(0x103c, 0x83b2, "HP EliteBook 840 G5", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x83b3, "HP EliteBook 830 G5", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x83d3, "HP ProBook 640 G4", CXT_FIXUP_HP_DOCK),
+	SND_PCI_QUIRK(0x103c, 0x83e5, "HP EliteOne 1000 G2", CXT_FIXUP_HP_ELITEONE_OUT_DIS),
 	SND_PCI_QUIRK(0x103c, 0x8402, "HP ProBook 645 G4", CXT_FIXUP_MUTE_LED_GPIO),
 	SND_PCI_QUIRK(0x103c, 0x8427, "HP ZBook Studio G5", CXT_FIXUP_HP_ZBOOK_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x844f, "HP ZBook Studio G5", CXT_FIXUP_HP_ZBOOK_MUTE_LED),
-- 
2.33.8


             reply	other threads:[~2024-10-09 13:42 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-09 13:42 Vasiliy Kovalev [this message]
2024-10-09 13:50 ` [PATCH v2] ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2 Takashi Iwai
2024-10-10  3:32   ` Kai-Heng Feng
2024-10-10  5:17     ` Takashi Iwai
2024-10-10  8:36       ` Vasiliy Kovalev
2024-10-16  8:14         ` Vasiliy Kovalev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241009134248.662175-1-kovalev@altlinux.org \
    --to=kovalev@altlinux.org \
    --cc=bo.liu@senarytech.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox